Can file adapter read file link/short cut

All,
I have a requirement for following use case
Can file adapter read a file-link (basically a short-cut to a file in a folder) and check if the file exists at the path referred to in the short-cut.
Thanks,
Praveen

Hi
symbolic link did not work
polling folder - "/tmp/filepoll"
soft link - "/tmp/filepolllink" ponits to above folder
my OS is Sun Solaris
error in opmn.log
<2010-03-24 07:46:55,023> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Read_ptt, operation=Read
<2010-03-24 07:46:55,025> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11001
Invalid Input Directory.
The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "/tmp/filepolllink".
Ensure that the following conditions are satisfied for the input directory :
1) It exists and is a directory (not a file). and
2) It is readable (file read permissions). and
3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and
4) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.
Thanks,
Praveen

Similar Messages

Difference in File Adapter Read File as attachment and Use File streaming

Hi all,
As part of our POC we created a File adapter using the option Read file as attachment and File streaming we observed below things
1.When we are taking “Attachment” option in file adapter, Its able to archive, but not supporting to write data to different location(using fileadapter’s write operation.)
2.when WE are taking “ file streaming “ option in the adapter , Its not able to achive, but it writes data to different location(using fileadapter’s write operation.)
Can anyone know is this is a correct behaviour . If yes what is the reason .
Thanks
Phani

Hi all,
As part of our POC we created a File adapter using the option Read file as attachment and File streaming we observed below things
1.When we are taking “Attachment” option in file adapter, Its able to archive, but not supporting to write data to different location(using fileadapter’s write operation.)
2.when WE are taking “ file streaming “ option in the adapter , Its not able to achive, but it writes data to different location(using fileadapter’s write operation.)
Can anyone know is this is a correct behaviour . If yes what is the reason .
Thanks
Phani

[File-Adapter] Reading not finished files

Hey,
my sender file adapter reading files which are not finished yet.
The files are created by an ABAP programm. The creation could
take some seconds. If the file adapter polls while creation is not
finished, we have a problem.
The flag "Process Read-Only Files" is not set, so the ABAP programm
doesn't seem to set the file to read only.
Is there a way to check (e.g. with an operating system command) if the
file is processed completly?
For example I could check if the date of creation is higher than 10 minutes
or something like this.
Any other ideas?
thanks
chris

What is the file adapter option you are using?
If NFS, you have the option "Milliseconds check before modification" that will prevent the file from being picked up till they are completly written.
If FTP, then when the file is being written to the ftp folder you should have the option to use temporary files option
Regards,
Bhavesh

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

Can the aTV read files from an iTunes library on my nas drive without my computer being on

I have my itunes library on a My Book Live nas drive that contains all of my digital movies and TV shows. I want to be able to watch my movies from the library without a computer running. I understand that Apple has chosen to chain you to the computer and your itunes account through Home Sharing but I can not see why they couldn't allow you to access a nas drive without a computer running because your aTV is tied to your itunes account also so why do they force you to run a computer 24/7 365 in order to access the files you have bought and paid for.
I have a love/hate for Apple because I love the quality of the products they make but I hate how they make all of the digital files you purchase only accessible through a computer running Home Sharing even though the files are not stored on the computer.
I have tried several things to get this to work without a computer but no luck. The only way I have found to be able to do this is to Jailbreak your aTV and install 3rd party software (which I don't want to do) that will allow you to by pass the computer and Home Sharing (which is dumber than ****) because that is all I want to do is eliminate the need of a computer running wasting electricity (I thought Apple was supposed to be an enviro friendly company, guess not). I am not trying to steal or give someone else my purchased movies and using the aTV and an internet connection they could still be able to tie your media to your itunes account so I just don't get there thinking, or lack of thinking I should say.
Is their a way to do this without Jailbreaking or modifying your aTV?
If not is Apple ever going to wake up and allow there customers to actually USE the media they purchase from them without Home Sharing and a computer running?

_Skull wrote:
Can the aTV read files from an iTunes library on my nas drive without my computer being on
no it can't. you need itunes open and running

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 value2 value3
I want to ignore value 2 but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

How can I make a 1-Click short cut for a specific tool in Adobe Acrobat 9 Pro?

How can I make a 1-Click short cut for Adobe Acrobat 9 Pro for the function "Create" > "PDF from Scanner" > "Black & White Document"?

No, Acrobat can't do that.

Hi Foks: How can I eliminate in Safari the short cut control 1...4 ? so that I can write these candidates in the NY Times Sudoku ? Thanks, Federico Penzo

Hi Foks: How can I eliminate in Safari the short cut control 1...4 ? so that I can write these candidates in the NY Times Sudoku ? Thanks, Federico Penzo

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
* https://support.mozilla.com/kb/Installing+a+previous+version+of+Firefox
Create a new profile exclusively for each Firefox version. 
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Testing_pre-release_versions
 
''(in reply of a PM)''

Can sender file adapter read plain files with different structure?

Hej experts,
I am facing the following sutiation in FIle-to-Mail scenario:
Bank sends two types of file : CONTRL and BANSTA to the same directory where XI shall pick , map to other stucture (mail structure ) and send mail.
You can not identify the file type( CONTRL or BANSTA) from file name - only from file content.
Would it be possible for XI to pick up file, check the structure and select the right XML structure to transform to?
Any other solutions?
Thak you for your help,
Natlaiya

You can not identify the file type( CONTRL or BANSTA) from file name - only from file content.
Would it be possible for XI to pick up file, check the structure and select the right XML structure to transform to?
If not wrong even XI/ PI cannot understand it.....if you say you can implement an adapter module to do the file conversion....even in that case you will need to know the file format....do you need to implement any conversion on the file?
Regards,
Abhishek.

How can transfer the read file name via own developed adapter module

Hello experts,
I want to know how I can handle the following issue:
I developed a J2EE adapter module for the file adapter "sender" with the aim to read the file name of incoming files. Thereto I implement the following code like this:
public ModuleData process(ModuleContext mc, ModuleData md) throws
ModuleException
Hashtable mp = (Hashtable)
md.getSupplementalData("module.parameters");
String fileName = null;
if (mp != null)
fileName = (String) mp.get("FileName");
Now I get the filename which includes a order nr. I need this order number to call a RFC Adapter via mapping. So my question is how can transfer this order nr to the RFC adapter?
Kind regards,
Fatih

Hi,
>> to read the file name of incoming files
Use file adapter with Adapter specific identifiers selected.
>>Thereto I implement the following code like this:
use udf in message mapping and avoid module
>>Now I get the filename which includes a order nr. I need this order number to call a RFC Adapter via mapping. So my question is how can transfer this order nr to the RFC adapter?
use RFC Look up function in message mapping...
Is module so necessary in this case???
Regards
Suraj

How to configure File Adapter (Read)..?

Hi all,
While configuring the Read Adapter in BPEL 11g i am getting not reading any data from given location. But my location are correct.. So please how to configure File Read adapter and give any URL for this ... Thank you

Hi all,
The file adapter it consists many operations like
1: Read
2:Write
3:Synchronous Read
4:ListFiles
So you are asking about Read operation
First you take one File Adapter-->Select Read Operation--->Give Incomming file Location ( In local system you can give like C:/temp/NewDir Or Unix Envornment like you can give /temp/NewDir)
After that you can give file Name like wich format it's incomming file name like CSV.txt or CSV.xml after you give Polling Intervels second or Mintued or Hour.You can select Native format or Define service Later once configure all those things the file adapter configration is done . If you have any doubts in file configrigation please go for the below link...........
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_file.htm#TKADP322

File Adapter read Operation

I am using File adapter to read files from the given location.
With this read operation it picks all the files at time.
I want to configure File Adapters that it should pick one file at time from the given location with given polling interval.
Can we do this with file Adapters in BPEL.
I am using SOA Suite 11g.
Thanks,
Arun Jadhav

Hi, in order to achieve that you need to set the "SingleThreadModel" and "MaxRaiseSize" properties for your file adapter.
Edit the adapter's jca file and add the following properties:
<property name="SingleThreadModel" value="true"/>
<property name="MaxRaiseSize" value="1"/>
You can set these properties also through jdeveloper, by opening composite.xml, selecting the adapter and then changing the properties through the properties panel.

File Adapter Read, Translation error

Hi,
I got problem with BPEL File Adapter. When i'm reading file i got scheme - termineted with semicol and without quoting.
In uploaded test file there was line - first colums;second colums;""third"" column";forth column;
And the problem are five quotes and adapter fails with translation error. Can i somehow ignore them?

Hi,
You have use the attribute quotedBy... By default, the specified string is &quot; ("). If your data includes this character, you must override this default even if the field is not quoted.
For example:
{code}
<element name="field" type="string" nxsd:style="terminated" nxsd:terminatedBy=";" nxsd:quotedBy="<"/>
{code}
Read this...
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/nfb.htm#CHDBBECG
Cheers,
Vlad

Can file adapter read file link/short cut

Similar Messages

Maybe you are looking for