Can I Auto format the first paragraph on every page of a 20 page document?

So I have a document that is basically just a numbered list of 200 entries.
There are 10 entries per page, making it a 20 page document.
Unfortunately, every so often I am given an additional entry to add, which invariaby is to the middle of the document, and not the end.
What I'd like to do is if I were to add a new #20 to the document, the old #20 (now #21), being pushed to the next page, would then automatically be formatted using my "StyleA" paragraph style.
I haven't been able to discover how to do this, which means, in the above example, I need to go to 18 pages and remove the "StyleA" paragraph formatting as in each case following the addition, it is now the second entry on the page. At the same time, I have to apply the "StyleA" paragraph formatting to each first entry of all subsequent pages. If I only had to do this once in a while, it wouldn't be an issue, but as this document is updated regularily, it is getting tedious.
Nested styles doesn't seem to be an option, since i'm using Numbering which requires a paragraph break to differentiate between each line number, and nested styles seem to apply to every paragraph, unless i'm doing something wrong there.
I hope this is enough to go on.
Kraeg

You are saying that the formatting is different for every 20th paragraph, reagardless of its content, and that it is aways going to be the first paragraph on a page?
As long as you never deviate from the 20 paragraph cycle this is actually fairly easy to do, you jsut need 20 paragraph styles, 19 of which are based on each other and differ only in the style name. You then set the "next style" attribute to rotate through the list of styles, so the next style for #20 is #1 and the sequence starts over. Now just select the entire block of text from the point where you edited to the end and right-click on the style name for the irst paragraph in the selection, then from the context menu choose Apply <stylename> And Next Style.

Similar Messages

  • Is there a way to auto capitalize the first letter of every word?

    I Like To Type In This Way. I Was Wondering If There Is A Setting That Will Automatically Capitalize The First Letter Of Each Word So That I Don't Have To Keep Hitting Shift Before Each First Letter.
    Thank You

    AdamMarshall wrote:
    Nice to see so many 'helpful' responses.
    This casing is useful for example, on an Address field. It would be good if the OS had this option for developers.
    I'm pretty sure it does as I've certainly had apps that, in certain fields, do use title case.

  • Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

    Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

    Gavin Lawrie wrote:
    Once it had been established that the iWork rewrite had resulted in some features being lost and others broken, and once Apple had acknowledged the concerns* and suggested they are working on fixes**, I'm not sure what else there is to achieve.
    You are writing that in the perspective of having read about it here already. Repeated often enough that you encountered it somewhere in the posts.
    Users are flooding in here and don't know any of this. Of course we have to repeat everything endlessly.
    Because I like to give precise, understandable and workable answers to repeated questions, and Apple doesn't allow sticky posts here, I created a separate forum which users can consult to look up real answers, and contribute for themselves if they have something valuable to add:
    http://www.freeforum101.com/iworktipsntrick/
    There is a section purely devoted to Pages 5. Add whatever answers you feel will lighten the problems of Apple's 'upgrades'.
    Peter
    * Where have they acknowledged anything?
    ** They have barely anything listed, compared to the massive list of deleted features, and nothing but an extraordinarily long time frame considering they created the problems here and now. Apple has not said they will do anything at all about fixing the real issues, the biggest of which is that the new iWork apps break virtually all the work of existing users.

  • Hi guys i added a new mail account and now she i click new mail i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks.

    hi guys i added a new mail account and now she i click new mail i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks.

    sorry, correction,
    hi guys i added a new mail account and now if i click new message on the mail field  i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks.

  • How can I find out the first intial row in VA02-output transaction??

    How can I find out the first intial row in the screen which appears during sales order change (VA02) >>enter the sales order number >>after the first screen appears >>in the menu bar go to EXTRAS>>OUTPUT>>HEADER>>EDIT??
    I have to find out the first row in the OUTPUT column which is empty,then populate it with some data using BDC.
    usefull answers will be rewarded.
    regards,
    Shashank .

    Pass the sale order number in the object key of NAST table,
    if u get 3 entires, then u need to place ur entry in the fourth row in that table control thru BDC.
    I think u got the logic.
    Regards,
    Sujatha.

  • Customer credit memo can't auto calculate the net due date

    Hi all,
    Our user used F-27 to entry customer credit memo (PK = 11),
    [F-27|http://www.flickr.com/photos/44956360@N08/5206144134/]
    and payment term use net 60 days,
    [F-27 - screen 2|http://www.flickr.com/photos/44956360@N08/5206144210/]
    but the system display the net due date doesn't add 60 days
    [F-27 - screen 3|http://www.flickr.com/photos/44956360@N08/5206144292/]
    To use fbl1n display the net due date doesn't add 60 days
    [FBL1N|http://www.flickr.com/photos/44956360@N08/5206144344/]
    Why the system can't auto calculate the net due date when user used PK = 11, but If user use PK = 01, the system can auto calculate the net due date.
    Best regards,
    Eric

    Hi Henri,
    I found the answer, when user enter the original document number in reference field of credit memo, the system can auto calculated the net due date!
    no reference doc
    [PIC1|http://www.flickr.com/photos/44956360@N08/5208025267/]
    input reference doc
    [PIC2|http://www.flickr.com/photos/44956360@N08/5208623198/]
    Thanks for your help.
    Best regards,
    Eric

  • Why can I only hear the first 1:29 seconds of songs I have purchased? from iTunes?

    Why can I only hear the first 1:29 seconds of songs I have purchased? from iTunes?

    Could be corrupt downloads...
    johnfwhite wrote:
    Why can I only hear the first 1:29 seconds of songs I have purchased? from iTunes?
    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

    Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

    Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
    I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
    Thanks!

  • How can I distinguish between the first and the rest in Smartforms??

    I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Regards,
    Subhasish

    >
    Subhasish Ganguly wrote:
    > I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Hello Vamshi,
    As per the OP's requirement he has to print 3 copies of the invoice. Which according to my understanding should be printed at the same time ? May be i am wrong in interpreting this.
    You must be knowing you can control the print params of the SmartForms in CONTROL_PARAMETERS where you set the NO_DIALOG & in the OUTPUT_OPTIONS pass the number of copies.
    I think the solution you have proposed the "Original Copy" will be printed only once. (Correct me if i am wrong)
    Every time the user prints the invoice again he will be getting a "Duplicate Copy". If this is what the OP wants the logic is perfect
    Cheers,
    SUhas

  • Can I auto adjust the slide length to match my music length?

    Can I auto adjust the slide length to match my music length?

    There is no way to automatically do this, but if you have a calculator, you can figure it out.
    If you are NTSC (USA), figure 30 frames per second. For PAL (Europe) figure 25 frames per second.
    So here is an example in NTSC. Say your music is 3:31, this is equal to 211 seconds or 6330 frames.
    If your slideshow has 155 slides, then each slide should last about 41 frames or 1 second and 11 frames.
    You can change the duration of the slides to 1:11 and apply to all slides.
    (Note: To edit at the frame level, go into iMovie Preferences and choose to display time as hhL:mm:ss:frames)

  • [svn:fx-trunk] 11727: You can' t just assume the first shader filter in a maskee object' s filter array is the luminosity shader when rendering a luminosity mask.

    Revision: 11727
    Author:   [email protected]
    Date:     2009-11-12 12:58:37 -0800 (Thu, 12 Nov 2009)
    Log Message:
    You can't just assume the first shader filter in a maskee object's filter array is the luminosity shader when rendering a luminosity mask. Instead, we now loop through all the filters in the array and search for the luminosity shader.
    QE notes: None
    Doc notes: None
    Bugs: SDK-24180
    Reviewer: Ryan
    Tests run: FXG runtime, FXG static
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24180
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Can I FaceTime with the first iPad?

    Can I FaceTime with the first iPad?

    The long answer: the original iPad does not have a camera and does not have the FaceTime app, hence you cannot do FaceTime on it.

  • Making the first letter of every word a capital

    hello CF oracles
    could you guys please advise me the best way to make the
    first letter in every word of a string a capital letter. (and make
    all the other letters lower case).
    eg. convert "the quick brown fox" into "The Quick Brown Fox"
    or convert "THE QUICK BROWN FOX" into "The Quick Brown Fox"
    I am taking form data and inserting it into my table, so i
    want to get it right as the data is inserted.
    i found a "UDF" on CFLIb.org that proports to do this, but i
    don't know how to set up a UDF, are there other ways or is this
    considered the best approach.
    http://www.cflib.org/udf.cfm?id=9&enable=1
    thanks for any help you can give me

    found it, here's the top info, Titlecase is what you want for
    this.:
    changecase.cfm
    Rev 1.01
    cf_changecase is a simple custom tag to format case in given
    string.
    (c) 2001, Rizal Firmansyah, [email protected]
    Input var:
    * case (mandatory)
    possible inputs are
    - sentencecase: Sentence case (default)
    - titlecase: Title Case
    - lowercase: lowercase
    - uppercase: UPPER CASE
    "happysailingdude" <[email protected]> wrote
    in message
    news:e46tjv$e30$[email protected]..
    > hi Dan thanks very much. I have made an executive
    decision to do a bit of
    > a
    > hack for now as my site is only small so if a user
    enters something in the
    > wrong way i can quickly manually update it myself.
    >
    > so now i have this which works 9 times out of ten if the
    user enters a one
    > word name eg "bill" or "fred" of "jane" then it works
    just fine
    >
    > the only time it doesnt work is if the user's name is
    more than 1 word (or
    > is
    > hyphenated) eg "mary anne" or "anne-marie" hence the
    first cfif line - in
    > these
    > cases i can manually update
    >
    > i put this here in case it is of use to anyone else
    >
    > cheers
    >
    > <cfif not (FORM.firstName contains " " or
    FORM.firstname contains "-")>
    > '#Left( UCase( "#FORM.firstName#" ), 1 )##Right( LCase(
    > "#FORM.firstName#" ), Len("#FORM.firstName#" ) - 1 )#'
    > <cfelse>
    > '#FORM.firstName#'
    > </cfif>
    >

  • The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

    The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

    You hit the target CT.
    It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
    I hope to make some sense here.

  • How do I create a calendar event for the first Sunday of every moth?

    Trying to create an event on my iPhone 4 (iOS 5) calendar that repeats on the first Sunday of every month.  Is there a way to do this?
    Thanks

    JohnnyDawg wrote:
    Hopefully we will get full iCal functionality on the iPhones and iPads one day.
    It would be nice, but don't hold your breath. But look at 3rd party calendar apps such as Week Cal or Pocket Informant.

Maybe you are looking for

  • How to Install UTL_SMTP Package in Oracle 8.1.5

    Hi We are trying to use UTL_SMTO package to send mail. Will this package runs in Oracle 8.1.5? Any restriction on using this package? How to install this package? Where the SQL for this package is residing. If anyone can answer for this, we will be t

  • Why do I get white lines surrounding transparencies when exported as a PDF for print - Indesign Vers

    Why do I get white lines surrounding PSD or Tiff transparencies when exported as a PDF for print - Indesign Version 9.2? I recently upgraded creative suite - now I am having issues with white lines surrounding any tiffs or PSDs when exporting for pri

  • Bindings problem (EJB3 - ADF  Faces)

    Hi Forum, I have a static fieald in a entityBean (EJB3) with its accessors: private static Double totalQty; I have this method in a session bean: public Double TotalsSaticValues(){ return VOrderLinesFulladj.getTotalCHF(); And I want to show the value

  • My DVD drive is not working.

    This is new laptop and the DVD drive does not show up. I have searched for drivers but there is not drivers specific to the device.   I have used the Fix-it tool but it could not resolve the issue but it did find it and said it re-installed the drive

  • Not Prompting for Parameters in .jsp page

    Post Author: montgomm CA Forum: General We have defined an input parameter to our report and it will successfully prompt for the input parameter within the designer preview.  However, once we build a .jsp page to contain the report and load it to our