Can i build simple encoder like gzip,- png-, jpeg- or bmp-encoder?

Hello dear people,
can i ask about unknown photo- or texture-type?
TGA File will show into flash-player?
I know any encoders...
Example: Encoders:
For jpeg, png encoder:
https://github.com/mikechambers/as3corelib/blob/master/src/com/adobe/images/PNGEncoder.as
For gzip or zip encoder:
http://code.google.com/p/ascompress/source/browse/trunk/src/com/probertson/utils/GZIPEncod er.as?r=9
any suggestions encoder for unknown file types?
If you like openning or viewing file like this OpenOffice Writer like PDF Viewer?
Can i build tga Encoder for tga, tif and psd file types?
How do i know hex or binary from current file type?`
I know becasue encoder for compress like gzip.works nice.
How do i multi file tree when one or more files were compressed. But i have been found - same site is down
Question:
Why do we need "Encoder" for flash player?
Do you think because encoder supports complety?
Thanks

Nancy O. wrote:
An image is just an image. You need HTML or JavaScript code to make it into a hyperlink.
<a href="http://example.com"><img src="your_image.jpg"></a>
Unless the site you're uploading to is willing to wrap your image inside HTML code like the example above or JavaScript there is no way to make the image file link to anything on its own.
Nancy O.
But how is it that a pdf file is able to contain a hyperlink within the image and it takes me to my website? Where on the image.gif, etc., do I attach the code you've posted? The website I'm wanting to upload the image to, only allows the files with extensions I've already indicated in my op. Thanx for your reply and help. -KD

Similar Messages

Pages are not loading properly and can't perform simple functions like forwarding e-mail, whats wrong?

When I sign into my Yahoo account the mail page doesn't load correctly and prompts me to turn off automatic updates. I can't send or forward any e-mails in the mail section. When I sign into Facebook I can't poke people back, look at mail friend requests or notifications. And applications don't load at all. When I sign into my checking account I can't view the account page..it's all scrambled. And other web sites are scrambled looking also.

Oberus,
We're very sorry for the troubles you're having getting your messages to your customers. We're happy to help. We will escalate this to the proper group for review. Thanks for your patience as we investigate and escalate this issue. ~Ian
Ian_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

How can I build a site like this?

Hello,
I'm pretty new to Flash. I've just been watching some
Lynda.com tutorials to get started. I recently saw this site
http://www.nfb.ca/filmmakerinresidence/
I would love to be able to build a site similar to it. I've
got experience with Photoshop and Video production, but not much
with Flash. What resources/tutorials/books would you all recommend?
thanks

Show us the part of your code that actually does the output. If it's a Transformer, you'll need to put in the code that I posted in this forum twice just last week. If it's something else, then, I don't know, you'll need to do something else. But I don't see anything in that link that actually outputs XML.

How can I specify simple math like in a Formula Node but on the front panel?

If the Formula node had a "text" property, that would work for me, because I could limit my inputs and outputs to N floating-point numbers.
LabVIEW once had such a thing but it was in an add-on math library, and I don't remember what it was called.
Solved!
Go to Solution.

Thanks; that led me directly to what I was looking for. A combination of "Parse Formula String.vi" and "Eval Parsed Formula String.vi" works perfectly for me!

Is there a JPEG encoder for j2me, PNG,GIF and BMP encoders are also wanted.

As is known that, image encoders are not currently available in MIDP. I have tried to port a j2se JPEG encoder to J2ME, but it cost me 32M memory when generating a 800x600 image. Could anyone help me. Thanks

well, of course ... what did you expect?Hum, I want to do some processing on my pictures, such as rotation, and then save it or send to my friends via MMS. but it's not easy to save the processed pixels to image file, such as JPEG, GIF or PNG.

How can I build Windows Like Help In Oracle Developer ?

Could anyone help me by giving the information that how can I build a windows like help system ?
Thanks In Advance.
Saiful Alam

I remember that in Oracle Develope 6.0 demos there are lots of this kind of help,but I don't know how to do it.If u can solve this problem,pls post it.

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
Thanks
Jeff Pulera
Safe Harbor Computeres

I am not being able to re-install Lion. Can I re-install it in a simple process like a normal software or at least get my money back since is useless then?

Little after I purchased and Installed Mac OS X Lion in my Mac, the computer crashed and I am not being able to re-install Lion. I feel my money is being stolen.

I really appreciate the help and I think Apple is the greatest computer's company there is, but Ive being screwed. If you cant make an product that can be easily installed in a few simple steps just like the first installation process was, dont sell it. My Mac was working fine, I installed the Lion upgrade and a few days later I had a computer failure and the auto-restore message poped up.
When the Mac booted all I had is a blank folder blinking and I had to reinstall everything all over. Now on top of that I need to stcik to Leopard after paying for Lion and I cannot return it. I understand some people found a way around it and are able to install it anyways, but I shouldnt have to do all that. Thanks a lot though! I really like this whole ideea about Apple Support Community and will do anything I can to help others just like you guys did.
Message was edited by: Jayzer Francecchi

HT2506 How do I drag an image around in the view, once it's magnified larger than the viewing area? I can imagine a simple "hand" tool like in Adobe PDF Reader doing this, but it's oddly missing in this application, quite a shame.

How do I drag an image around in the view, once it's magnified larger than the viewing area? I can imagine a simple "hand" tool like in Adobe PDF Reader doing this, but it's oddly missing in this application, quite a shame.

@Csound1 how is my mac relevant? I'm talking about software not hardware.
@Kurt Lang sorry, I composed the message when looking at "Preview" application help on this site, the fact that it missed the context here, is another issue I have with Apple's "famous" UI/UX design...
So for the record, I'm talking about the "Preview" app that comes bundles with Max OSX.

Can I build a interactive log-in form with Edge and Export Raw code to edit?

Hey Everyone,
I love adobe edge, but I'm still getting used to it. It's very easy to use, but I ran into an issue. I am redesigning a webpage for a client and need to build a log-in page and re-design the site. The site is a Dashboard that will be on an ipad and computer. What I need to do is take my design and design a template for them to use. They require HTML4 and up with some coding (not a fan of coding, I am strictly a designer, and before you guys critize about why I took the job when I don't know coding, it's a side project they are having me do for them while the main design project is being evaluated and I'm on contract so I don't have a choice, still would like to learn how to achieve what I need) but I still want to maintain the animation I have planned for the log in, very simple nothing special. Basically what I want is when you log in and click in the "text" box the background image will go from the clear image to the blur image.
What I've done so far,
I built the log-in page as a test to see if it would work (didn't take long since I saved as a PSD and imporated the files). I've attached an imagw to show a visual of what I am trying to do. The animation works fgreat for what i need, but now I want the box I click in to be writtable inside and work with the animation. I can't seem to figure out how to make the box's I created typable to type in for a "Username" and "Password" in other word interative. I used the boxes provided in edge because they are HTML boxes, but I want them to become text boxes to enter the Username and Password (It doesn't have to be perfect just enough for me to type in to pass off to the programmers). I know you can make edge interative with muse and what not and I was hoping to achieve what I want for them so I can export it and pass it off to the programmers. Is there a way to add this in Edge? If not, I know you can export to Dreamweaver and when I import the file to Dreamweaver I just see a grey box with the file I created (.oma I think) from Edge but not the content unless I "Preview it" in a browser.
So is there a way to build what I want in edge without resorting to dreamweaver? If so and there is code to input can you guys provide step by step on how to put it in the program? And is there a way to export the project so I can pass the RAW code to the programmers to do there thing? Lastly, is there a way to incorporate Jquery mobile to Edge? For the Dashboard can I build the same thing in Edge? Example what will be in there are things like charts, Calendars, Dates, Etc, Etc. If I need to resort to building it in dreamweaver I can provide the code for you guys to alter to change for what I need. Like I said I'm not a big fan of coding and a little stranger to it. I just know the basics and the fact I haven't touched dreamweaver since CS4 makes it even harder to use. Some tools I like are gone such as AP divs. However i like the new elements you can inject into the program such as the Jquery stuff, but for the simplist things I want to do such as moving them left or right or centering them is a different story.
Please Help!
Thanks!

if you search on the forum you can find useful posts about creating a form in edge
Zaxist

How can I build Oscillator in LabVIEW?

I want to generate a signal like square wave or close to square wave. Time duration 2 or 3 sec. Any idea how to build it in LabVIEW please?

Nadjil wrote:
I want to have control on Led. I am using the analog output. I can change it from 0 (0 volt) to max (5 volt).
First: I want to give max. to keep the Led on. I want to keep it on for period of time.
Second: After that I want to give square wave to the same Led. I want every 2 or 3 second to give a pulse to the Led. Also I want to keep it on for period of time.
Use a loop and a shift register. Wire in the initial value (5) to the left side shift register. Inside the loop, do some arithmetic to toggle between 5V and 0V and wire the result to the right shift register. Also wire this result to your analog device input. When the loop runs, the value will toggle between 0V and 5V. Put a delay inside the loop for the time you want the LED to be on/off.
There are many ways to toggle between 0V and 5V. You can create a case statement like: if 0 then 5, else 0. You can compare the value to 5 and use a selector function to pass the opposite value. You can use a boolean instead of a value, and use a selector to pass 0/5 depending upon the boolean. To toggle the boolean, use a NOT function. My favorite is a simple subtraction. Output = 5 - Input. If input is 0, output is 5, if input is 5, output is 0.
I've given you basics. I leave the coding up to you to help you learn better.
- tbob
Inventor of the WORM Global

How can i build a manchester coding in labview signal processing?

how can i build a manchester coding in labview signal processing?
mean to say that how can i digitize my audio input.i waqnt to convert my audio input into manchester coded data format!!!
kindly post related VIs
regards
Solved!
Go to Solution.

idma-
Check out the LabVIEW FPGA example http://zone.ni.com/devzone/cda/epd/p/id/6126
Generate Manchester Signal
Basic example showing generation of a Manchester encoded data stream. The data to be sent is generated in one loop and passed to a FPGA FIFO. The subVI which generates the Manchester data stream reads the data bytes form the FIFO and passes them to the digital output. The subVI prepends a simple header to each data packet which allows a reader (see next example) to synchronize and acquire/parse the data. The header consists of a thee half bit pulse followed by a one half bit pulse. The three half bit pulse is not a valid component of regular Manchester encoding and can therefore be differentiated from the rest of the protocol. In addition it can be used by the receiver to to easily measure the bit rate of the protocol. By dividing the length of the three half bit pulse in half (3/4 of a bit), the receiver has a measure to differentiate between full and half bit pulses in the rest of the protocol.
Generate and Read Manchester Signal
An extension of the previous example which adds a Manchester receiver subVI. You must physically wire the digital output channel to your input channel to loop back the data outside the I/O connector of your FPGA R series card or C series module. The Manchester receiver subVI is expecting the data packet to be prepended by a header as explained in the previous section.
I will see if the is a more precise example but this should help
Sam S
Applications Engineer
National Instruments

Can I use the 'Export Signal Property Node' on a quadrature encoder?

Hi,
So I don't know which counter board I'd be using yet for this (it's used in conjunction with a PCI-6280--the PCI-6280's counter inputs are all taken and so I need another board), but assuming this is possible at all in DAQmx I wouldn't mind knowing whether, say, the PCI-6601 (or any other timer board for that matter) could do this. I'm programming this in LabVIEW 2010 by the way.
I want to have a counter which counts the number of pulses on one channel (I'll call this the 'clock' channel) between when another channel goes from low to high (which I'll call the trigger). It's basically a pulse width measurement, but I only care if there are more than n clock pulses between triggers. I need to have a hardware-timed digital signal which goes from low to high if there are ever more than n pulses between trigger changing state from low to high.
What I am planning to do is this:
Wire 'trigger' to the z-input of the quadrature encoder, and set the z-input value to some arbitrary large value such that, at the quadrature encoder counter task's settings, the counter reaches terminal count in n pulses.
Configure the quadrature encoder counter using DAQmx Export Signal Property Node (tutorial I was looking at is here: http://zone.ni.com/devzone/cda/tut/p/id/5387 ) to toggle a digital channel ('counter event output') from low to high if the counter reaches terminal count (ie, if the encoder reads n pulses).
If the encoder ever reads n pulses on 'clock' between two rising pulses on 'trigger', it sets counter event output high.
Is this possible? Reading through the manual of M series PCI-62xx devices, the index pulse loads the counter with a particular value so it seems like you could conceivably set the counter to the terminal count if you wanted. My only real problem is whether DAQmx Export Signal Property Node works on all counter tasks or just on edge counting tasks.
Thanks in advance for your help. If this isn't possible, I can reply with more details on the problem this is supposed to solve so that you can help me figure out an alternate method.
Solved!
Go to Solution.

There is probably a way to do it, but it it may be easier to use an X-series board for the job. They support a new counter capability for count reset on a digital edge without needing to be configured in encoder position mode. I am not sure exactly how that feature's been implemented however, so maybe it won't make things easier after all.
The plan based on the hoped-for behavior:
1. Configure an X-series counter for pulse generation based on "ticks" of your clock channel.
2. Set both initial delay and low time to the critical # of ticks.
3. Configure for count reset on a digital edge (if possible in pulse generation mode)
4. Configure the count reset value to be the critical # (or possibly 1 less, if possible in pulse generation mode)
5. If you want the output to remain high indefinitely, configure the counter task to use its own output as a
pause trigger, and pause while high.
The way pulse generation works is to preload a # of "low time" ticks into the count register. Then every source edge will decrement the count. When the count reaches terminal count (0), the counter's output is toggled (or can be configured to pulse). The register is then loaded with the # of "high time" ticks and the process continues.
You would be perpetually interrupting the count-down process as long as you got your triggers in time. The count would keep getting reset to the # of low counts, keep decrementing toward 0 without reaching it, and so on. If ever you did reach 0, the output state would toggle high, then the high state would prevent subsequent clock signals from decrementing the count.
You can conceivably do a similar thing with a 6601, but I'm pretty sure you'd need 2 counters working together to get it working.
-Kevin P

JDeveloper, Can not build schema - Help Required

Hi everyone,
I am facing a peculiar problem with Jdeveloper. (10.1.3.4.4270)
I am developing an ESB project. When referring to a XSD from within a XSD using a URL i.e. import, It's giving me error.
Here is the sample code:_
<?xml version="1.0" encoding="utf-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
<xsd:import namespace="http://xmlns.mysite.com/q/types"
schemaLocation="http://192.168.8.10:7072/mySchemas/xmltypes.xsd" />
( [http://192.168.8.10:7072/mySchemas/xmltypes.xsd|http://192.168.8.10:7072/mySchemas/xmltypes.xsd] is accessible from a browser directly on the machine where project dir exists)
When opening the XSD is design mode its showing red(error) for any element that uses types from xmltypes.xsd. When opening the XSL mapping which uses the current XSD its gives the following error:
"Failed to open the target schema:
Can not build schema 'http://xmlns.mysite.com/q/types' located at 'file :/C: /....../*xmltypes.xsd*'"
+(It seems Jdeveloper is looking for the xmltypes.xsd in project dir, even though the import points to a URL)+
The same code above works fine in Eclipse Gynamade and elements in current XSD are able to refer to types in xmltypes.xsd.
What could be the problem. I am not finding any solution for this.
Thanks in advance.

Thank you for your reply.ButI had assign the dba role to the user,and could you tell me what version can build the schema.I had use the RAM 6.3.4.0.0 Complete 6.334
Thank in advance
Chris

How can i build RPMs file for my own Java Application?

How can i build RPMs file for my own Java Application?....I have my own directory that contains all Java Source files and some files that my Application required....I want to build RPMs file like a install File to Linux System, Now my OS is Linux Fedora core 1.....How can i do this?

I think that in order to create a RPM, you'd need to
use some C.Nope - the RPM is all about packaging and the "magic" x.spec file. You can have anything you want in the RPM, but you have to use RPM tools to build the .rpm file. One of the features is that you can also indicate (via "install" scripts) modifications to other files or the filesystem to support the installation of whatever's in the RPM.

Can i build simple encoder like gzip,- png-, jpeg- or bmp-encoder?

Similar Messages

Maybe you are looking for