Can I buy 2 x 4gb RAM to add to the current 8gb RAM in iMac 2013 27inch?

The iMac 27inch has 4 ram slots, it already has 2 filled with 4gb of RAM in.  Can I buy the same brand of RAM and put it into the other slots?
What's the exact model number of the RAM in 27 iMacs 2013?  Could there be problems, as they may not quite be a perfect pair?  Also how much could I sell my current iMacs memory for?

Yes you can add RAM to fill up those other 2 slots. Buy it from Crucial.com. It does not have to be the same brand but it has to be the same specs. Crucial will sell you the same spec RAM as what is in there already.

Similar Messages

  • If my Mini is running 64 bit can I run more than 4Gb RAM?

    I hear ALL over the place that the mini can not use more than 4Gb RAM.
    Is this a hardware limitaion of the motherboard/Processor?
    OR
    Is this due to the fact that mini's run at 32 bit?
    You can now easily run modern mini's at 64 bit:
    http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
    So who knows the REAL answer?
    Thanks -
    skibum

    Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
    If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

  • Where can I buy a new 3.5" SATA HDD with the extra thermal sensor port for my late 2009 imac?

    where can I buy a new 3.5" SATA HDD with the extra thermal sensor port for my late 2009 imac?

    Depends on the original drive. According to OWC, at least last time I checked some months ago, any current WD drive they sell (up to 2 TB?) will be able to be swapped directly. I am unable to confirm this personally. But, even so, that was a while back. You should check with them again on this. As for Seagates, that might not be so simple.
    This is the original article on this from them.
    http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
    If you find a drive that OWC sells and is certain will swap in directly, you can see if newegg.com has it for less.
    This one that OWC sells will swap in directly, according to them.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339

  • Can I buy an iTunes gift certificate for someone outside the U.S.?

    can I buy an iTunes gift certificate for someone outside the U.S.?

    Yes, but they can only be redeemed in the US Store.

  • I share icloud apps with other ipads.  can i buy my own itunes card and add things i want to my ipad?

    i share icloud apps with other ipads.  can i buy my own itunes card and add things i want to my ipad?

    WoodyK,
    If you are going to use your iTunes account as you and your partners iCloud account then you need to go into each phone and change your settings.  In messages, you need to change from iCloud to the phone number.  Create a contact with your unformation and re-train Siri with your name.  Let me know if this helps.
    WoodyK wrote:
    I registered my Iphone4s on icloud with my seperate login account and wanted to create my own profile. But now it has found my partners login and when I use SIRI i get references from SIRI that my name is hers.......eg ; I don't understand you JULIE. But my name is male........
    If this an indication of what I can expect ........then be warned APPLE I am not happy!!!!!!!!!
    HELP!!!!!!

  • Can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

    can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

    If you plan to store important "original" or "master" files and documents on the Time Capsule, then you might want to think about a way to back up those files to another hard drive.
    Why? If the Time Capsule has a problem...and you have no backups....you lose everything.

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

  • I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

    I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

    Yes, you can.
    This is a special feature of the AirPort Express 802.11n.  You will have to set it up "manually" to "enable Ethernet clients".
    If  your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
    If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

  • How to upgrade RAM in iMac 2013 models

    how to upgrade RAM in iMac 2013 models. I know one can ask for RMm upgrade while buying iMAC from online store. Is it advisable to upgrade the RAM by self or from some professional?

    Even if you do get the 27",  RAM installation is a PTA to install.  Prior to setting up your computer on your desk, you must lay it it face down on a soft area (couch).  Then you have to maneuver your hand & fingers either around or under the pedal to pop open the RAM door.  When putting the RAM into the slots you need to use all of your God given muscles to get them in there.  Otherwise, while you are seating one RAM, the one next to it will pop right on out. 
    When you hear the "snap," the RAM is seated properly and it's neighbor(s) will not pop out.

  • Can I use an Adobe Professional license from 2008 with the current version of Adobe Acrobat XI Pro?

    Can I use an Adobe Professional license from 2008 with the current version of Adobe Acrobat XI Pro?

    With "license" you mean serial number?  If that serial number was for a different Acrobat version (e.g. 9), you cannot use it for the current version XI.
    You can however use it to purchase an upgrade from http://www.adobe.com/products/acrobat.html

  • Can Internet Explorer (IE) be downloaded to and used on the late 2008 model of iMac running OS X 1.9.5?

    Can Internet Explorer (IE) be downloaded to and used on the late 2008 model of iMac running OS X 1.9.5? If yes, where can it be downloaded from?

    Only if you run Windows. IE does not work on a Mac without Windows.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How can I get an item and it's attachments from the current list using SP's JavaScript Client Object Model on newform.aspx?

    I only recently learned/read about SharePoint's JavaScript Client Object Model. I'm reading online trying to figure this out but not having much luck.
    On newform.aspx (and dispform.aspx) I want to get the
    current list,
    the last item created, and it's attachments. I now the CAML query I need to get the last item created, but first I have to get the current list and I am not sure how to do that.
    I tried this but it returns null:
    SP.ListOperation.Selection.getSelectedList()

    Hi,
    For your issue, you can get the list name from the new form url and retrieve the list last created item :
    https://social.msdn.microsoft.com/Forums/office/en-US/b90a64f8-2255-41b0-9d91-78335dd4a4cf/get-list-name-from-list-url-through-javascript?forum=sharepointdevelopmentprevious
    http://msdn.microsoft.com/en-us/library/office/hh185007(v=office.14).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • How can i pull out data from a spreadsheet only from the current month?

    Data is constantly being fed into a spreadsheet using a VI, this data comprises of such things as month, year, weights, std dev, etc.  I want to do some data manipulation on the current months data while the VI is running, how can I pull out only the data relating to the current month?  Each input into the spreadsheet stores the values for that run on one row, and there are perhaps 150 runs each month
    Any thoughts are greatefully received
    Thanks
    Ross
    Attachments:
    Results.xls ‏1 KB

    Hi Ross,
    I thought I would go away and make you an example VI for the results xls that you have sent me.
    Here it is:  I have added a few comments here and there but if you need more info please don't hessitate to post back on the forum
    Hope if helps
    AdamB
    National Instruments
    Applications Engineering Team Leader | National Instruments | UK & Ireland
    Attachments:
    MonthExtract.vi ‏43 KB

  • How can I get new windows to open On Top Of the current window, not Behind the current window?

    Regarding the Options checkbox to "When I open a link in a new page, switch to it..." I already have that box checked, but still windows are opening behind my current window.

    Hello MichaelDMiller60, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • I bought the 2.0 Aluminum Macbook, where can i buy 4 gig of ram for it?

    i bought the 2.0 Ghz processor macbook with 2 gigs of ram obviously, but i want 4 on it, is there a 3rd party (i believe thats what its called) company or webpage where i can buy "cheap" (by that i mean not so expensive, but not bad quality) ram for the macbook
    i appreciate the help, THX

    They have the Aluminum MB. They need the 4GB of DDR3 RAM.
    http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S4GP/ $84.99 at OWC.
    http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=2E9B2B4EA5CA7304 $103.99 at Crucial

Maybe you are looking for

  • Yoga 13 - Bluetooth issue

    Just wondering if anyone has encountered this problem: Occationally when waking the unit from sleep the Bluetooth device stops working. It appears in the Device manager with an "!" on it, but when I disable and re-enable it it works again for a day o

  • HTML with iWeb

    Hi, I just got the iWeb program, im trying to access the html code to add extra's to my site. Currently I am just closing down iWeb and editing through a text program, but im wondering if there is a way to view the html within iWeb so i dont have to

  • BI Scheduler services not starting

    Hi, I am trying to use BI Scheduler for the first time. for this purpose i am following this link of Venkatakrishnan J http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots i have configured the first 5 steps but

  • Desktop manager does not allow to install 5.0 Firmware

    Hi all, i got following problem. I try to upgrade several 9000 and 8900 to FW-Versions 5.0.0.190 or higher. The Desktop-Manager recognizes the installed Firmwares and shows them BUT marks them with an asterisk. Then it states "only users with an acti

  • Can't import CD's with windows vista

    I seem to be having the issue with windows media player to so i don't think it's an issue with Itunes but maybe someone can offer some advice on settings I am using a plextor px810-sa on my over pc and when i put a cd in itunes see's it, then when i