Can I connect an airCARD 782S to apple wifi, Can I connect an airCARD 782S to apple wifi
can I connect and aircard 782s to apple wifi
Hi,
According to the http://www.netgear.com.au/service-providers/products/mobile/mobile-hotspots/782s .aspx#tab-techspecs web page, the AirCard 782S is a mobile hotspot. This means that it is a mobile broadband modem and a Wi-Fi base station in one device.
If you for some reason wish to connect to the WAN port of an AirPort Extreme base station, a mobile broadband modem or hotspot would have to be equipped with an Ethernet port. Special configuration may be required.
The AirCard 782S does not have an Ethernet port (it may or may not be possible to get one externally: http://www.netgear.com.au/service-providers/products/mobile/mobile-hotspots/782s .aspx#tab-accessories).
An AirPort Express (http://www.apple.com/airport-express/specs/) could possibly be used to convert Wi-Fi from the hotspot into Ethernet.
Jan
Similar Messages
-
Ipod touch can no longer connect to XP following Apple upgrade, HELP !
This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. ThanksDoes the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA inputWelcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC.. -
Hi,
I have a Ipod Touch that I have an apple ID for and have set up on my MAC OS with Itunes and all that jazz.
I however fully admit I know very little about properly using Itunes especially when I get new Ipods. Case and Point = I have 6 different Ipod versions and have never known how to transfer the music from any on of them to a new one or add it to one library because one time when plugging in a Ipod nano I lost everything off my other ipod nano and my library and it all just didn't work out well.
Now I have another Ipod Touch. I learned that you should use the same apple id for a new Ipod-thats something new I didn't know. The others are under Id's and emails I don't even remember honestly. Not sure how I'll ever fix that.
I've read about 2 user accounts. Get stuck with something about a key on my mac wanting authorization when I had two accounts, so thats just out.
I've read about 2 libraries, but do not really understand the process & have not gotten anywhere with the pressing option while opening ITunes-Do I have to have my second touch plugged in first? That doesn't seem right.
My Main question, well, one of em: I set up the second touch with same Apple ID but I have not attached to my Mac Because I am afraid of whatever may happen. So: Will my Mac say "Hey, what's this Second ipod and what's your purpose kinda deal?" or Will it replace my other ipod and wipe it blank, my Mac then saying some other choice words to me about the attempt of two ipods. . .?
So-My Goal here: When I open ITunes or it opens when connected to one of the touches (at this point I've lost hope on the other ipods for now) how do I make it so that under devices it shows the names of Two Different Ipods-I did name them differently if that matters. And How then do I make the Mac know which touch I connect or will it just Know by the powers that be? And How Can I Split some of the data from my 1st touch to my 2nd touch? And Add new data to one or the other or both.
My No Logic behind it Easy idea I wonder of: Can I just connect the new Blank touch in to my mac that already has a touch with Data on it, both under the same email and apple id, and have nothing go wrong? Will my Mac set it up like a new ipod and list it as a new one under devices ? ? Then Ask another question on how to transfer some of my data from one to the other in another Incredibly Long post, such as this?
Sharing between the two (and maybe the others later one): I only have 1 MAC so the whole home share doesn't seem to help me here. But I've read of familys-whole families!-having multiple ipod users, I'm guessing under the same apple ID? ? ? I don't really know, anyway, and they can sync the data from one area, or different libraries for each. HOW? And what's best for me to do, or rather, since you see how little I understand of this entire process, which method do you think I can actually complete without messing something or everything up?:)
Any help here would be great. I sincerely apologize if this is a repeat and I just don't get the other questions or answers. I'd just really like to figure this out so that my 6 other Ipods from past years with complete music libraries and forever unseen photos -once they had a camera-yeah, it goes back that far . . . It'd be nice to actually have all that back, or at least accessible without fear that it'll all disappear. What would happen if I connnected an Ipod nano that I think has another apple ID to my MAC? Would Itunes like fizz out and banish my touch or something? Yeah, I need help. I can use em. . .does not mean you have to be smarter than the device apparently. Well, its Itunes that really just doesn't get along with me or my devices I think. . .Thank you for any ideas on simplifying this all for me.Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
I want to hook up Apple TV but my One HDMI Jack on my TV is already connected to my HD cable box. My TV has jacks for s video, component, and PC in jacks.
Can I use one of them to connect to Apple TV with some type of cable to my newer I-pad ?Here are the Apple TV outputs.
What other outputs does your HD cable box have?
Apple TV (2nd and 3rd generation): Guide to ports and connectors
http://support.apple.com/kb/HT5713
Cheers, Tom -
I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?
Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here
-
Apple TV 1st Gen can no longer connect to wireless networks
My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home. I rean the diagnostics at the reset screen and the Apple TV says it is performing normally. In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago. The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty. The issue is limited to the Apple TV. I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network" the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks. I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.Follow-up: Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
Next, disconnected the ethernet cable. ATV1 froze and was restarted using the Menu + ( - ) combo on the remote. Re-ran diagnostics yeilds: Apple TV is working fine.
Restarted, then went to configure the Wirelss settings. Apple TV once again does not show either of the two wireless networks. Selecting "Other..." and entering the SSID yields the same immediate response:
"There was a problem connecting to the network. Check your settings and try again. (-4)"
No change on the wireless front :-( Bummer.
Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
Thanks for your help. -- Paul -
Apple TV can no longer connect to network after upgrade.
I had heard that lots of people were affected with this problem with the software upgrade before this one so I deliberately waiting until this one came out before taking a chance. I was wrong.
After updating to 4.4. (3140) I can no longer connect to my network. It says there was a problem and gave the error messaged number: (5) in brackets.
I've had nothing but problems with both Apple TV's that I have owned, version 1 and this new version 2. I've a good signal from my router and I've used three different ones over the time I've had the two apple tvs.
Anyone got any ideas.
I can't connect the apple tv directly because they are too far apart in the house. I can only connect by wifi.
There is nothing wrong with my wifi because I'm connected to it fine though my imac, iphone and ipad and laptop, (not all at the same time)Ok, here's a solution, courtesy of our friends at AppleCare.
Unplug the router for 90 seconds.
I was running ATV2 with a Time Capsule. The TC thought the ATV was still connected using its former IP address so wouldn't let it reconnect with a new one.
Hope this works for anyone else with same problem. -
I'm wondering if I can use Apple TV to play movies and slide shows on my TV, play music over my sound system and print from my devices (Iphone 4S, iPad and MacBook pro 2011) by using an Airport Xtreme or Time Capsule (to back up the devices) if those devices are not connected to the internet. Can anyone advise pls? Reason for this is that I work on a moving ship and don't have an internet connection to speak of for much of the time (and if I do it's a wireless system that I need to pay by the minute and that is too slow to support the Apple TV), but would all the same like to create a wireless environment where my devices can interact with each other. I seem to get conficting info and a rep at the apple store in Honolulu told me that you cannot use Airport Xtreme or Time Capsule without an internet connection (it was busy, he may have misunderstood my question).
Looking forward to your input.Don't try to home share it.. as that is dependent on using Apple ID.
Just airplay to the ATV.. iTunes: Using AirPlay
The movie should play exactly as your doing music.. but get rid of the whole home share if that is causing issues.. there is no mention of needing home share in the above..
If you still have issues you might need to do it other ways.. like export the movie from itunes.. and play it using vlc which should allow you to stream it to the apple TV using airplay.
That is a bit tricky and I have not used that setup but it should work.
http://apple.stackexchange.com/questions/23412/can-i-stream-any-video-played-wit h-vlc-player-to-apple-tv
If you have a hunt around you should find it fairly easy to do.. but straight airplay should work.. there is a very recent update to ATV which might help it with airplay. -
Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html -
Hello,
I am using a MacBook Pro. Bought in April 2011. Upgraded to Lion, OSX 10.7.3
I have an Apple mail account that synced with a gmail account in my Mail Program.
I then chose the CLOUD activation. I can find my mail if I go to cloud.com but I no longer get any Apple mail delivered to my Mail program on my computer. My gmail account syncs just fine. In fact, the Mail program doesn't even open any longer when I double click. I have to go to the Mail menu, select Message Viewer to even view my mail program now. The Internet connection is testing fine using the Connection Doctor. But when the Connection Doctor program just whirs for eternity and never finishes checking the accounts.
Is this a bug? Do you have to set up your mailbox again for Apple mail to get it to sync after having mail hosted on the Cloud? Or does hosting on the Cloud mean I now always have to go the hassle of logging in at the cloud site to even access my Apple mail?
Any ideas out there? I am sure there are Mac geniuses, the real ones, floating around in cyber space and would love to get some intelligent directions to solve this new issue.
Cheers
AnneI would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne -
Hi all,
I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
Connecting directly to iTunes using a four digit passcode.
I've tried both methods, and neither work!
Here's what happens for each method:
From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
I'm kind of at the end of my rope here. Anyone?I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
The remote app on my phone won't connect to my Apple TV. In can use AirPlay.
I Cant get the remote app on my iPhone 5s to connect to the apple TV. The AirPlay is working fine. I have switched the Apple TV off with no help.
Hi Chris,
The article linked below details a number of troubleshooting steps that can help get the Remote app to successfully connect to your Apple TV.
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
https://support.apple.com/en-us/HT201397
Sincerely,
Allen -
I bought my IPad 2 from a friend. I have reset to clear all of his information out. I am trying to connect it to my computer to sync my itunes and I keep getting the message that my IPad can't be used because Apple Mobile Device Service is not started can anyone help with this?
I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes. -
Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.
This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.
Maybe you are looking for
-
Flash Player Not Working In Internet Explorer 11
No matter what I do, uninstall, reinstall Flash doesn't work in Facebook or on You Tube. I have to download the video I want to view to my desktop and play. If I use Chrome Browser it works. I did the Tools Options, Manage Addons etc. and it show
-
HI, I have a requirement as below. On click of Oracle forms default Save button, I should show a stacked canvas to the user to enter some values and then press save button in that canvas to commit all the changes in the form. Any idea how to implemen
-
Can you add data to a 4g lte mobil hotspot through my verizon
I have an iphone 4 on my current "my Verizon", can a 4g lte mobil hotspot be managed with that account ?
-
Uninstall Photoshop Elements 10 silently
How can I silently uninstall Photoshop Elements 10?
-
No program on my ipad including a Camera is working!