Can I create a dll from labview with more that one function name

I know that when I create a dll from C and then call it in labview using the call library function node I can see the different functions on the configuration screen. Is there a way to create a dll in labview to have more than one function name? No matter how many functions happen in my VI it seems to build into a dll under the same function name requiring inputs for every function, can this be avoided somehow?
Thanks,
Dave

Each function corresponds to a separate VI. When creating the dll, on the Source Files tab of the app builder, click the Add Exported VI for each VI that you want. SubVIs of a main are not automatically exported and will not be available as separate function calls.

Similar Messages

How to create a dll in LabVIEW with a 2D array

I'm attempting to create a dll in LabVIEW with the following parameters from Test DLL.vi:
Inputs:
IN1 - Word
Buffer - 2D array of Unsigned Byte
Output:
OUT1 - Unsigned Byte
The prototype is constructed as follows in the Build Specifications of the Project:
uint8_t TestDLL(int16_t IN1, TD1Hdl *Buffer)
The dll builds successfully but when I attempt to use it in another VI (using the Call Library Function block) the prototype appears but it does not look like what was defined from the Build Specifications. Instead it looks like the following:
void TestDll(void );
I attached some screen shots of all the settings as described above.
Attachments:
Test DLL Front Panel.JPG ‏85 KB
DLL Prototype Before.JPG ‏84 KB
DLL Prototype After.JPG ‏54 KB

The Test DLL.vi is what I used to create dll prototype with in the Build Specifications in the project.
Note: There is no logic implemented yet.
Attachments:
Test DLL.vi ‏7 KB

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Can I use my iTunes Store account with more than one PC ?

Hi all,
Am I able to use my iTunes Store account with more than one PC ?
I use my account on my PC - but I would like to download the latest version of iTunes onto my Mum's laptop, log in to my own iTunes Store account and rent a movie for her to download onto the laptop.
Is this possible and would I still be able to use my account on my PC at the same time?
Many thanks,
Steve.

Good question.
I don't think you can--if I'm incorrect, someone will tell me--but it seems to me to be easier to simply open an iTunes account for your mom. Then get her a gift card, load it into iTunes for her, and rent a movie that way. Not elegant at all...but workable.
Doc

HT5622 Can Face Time be used to connect with more than one person at a time?

Can I connect with more than one person at a time when using Face Time?

You mean like a conference call? No, unfortunately.

Firefox locks up regularly since ver 3.5, especially with more that one tab open.

firefox locks up regularly since ver 3.5, especially with more that ona tab open. navigating thru the www.nokia.be website is a good example, especially when looking for different models and comparing them. firefox needs to be closed then via windows tasks/ close application.
I tried to reinstal firefox 4.0.1, without any add-ons but theproblem remains, it even seems worse!
in Windows explorer this problem never happens!!

try out this code its working...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"><mx:VBox
width="100%" height="100%" >
<mx:DataGrid width="100%" height="100%" dataProvider="{dataSet}" >
<mx:columns>
<mx:DataGridColumn>
<mx:headerRenderer>
<mx:Component>
<mx:CheckBox />
</mx:Component>
</mx:headerRenderer>
<mx:itemRenderer>
<mx:Component>
<mx:Panel width="100%" >
<mx:ComboBox />
<mx:TextArea />
</mx:Panel>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
</mx:columns>
</mx:DataGrid>
</mx:VBox><mx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
public var dataSet:ArrayCollection = new ArrayCollection([{Month:
"Errors", Income:1500, Profit:90},{Month:
"Work In Progress", Income:1200, Profit:1000,percent:100 },{Month:
"Pending on Trustee",Income:1200, Profit:1000,percent:125},{Month:
"Pending on Notary", Income:750, Profit:1500,percent:175},{Month:
"Pending on Signature", Income:860,Profit:900,percent:75},{Month:
"Pending on County", Income:500,Profit:750,percent:175}]);
]]>
</mx:Script></mx:Application>

Can I create a fade from black with Media Encoder?

I am having a problem with Adobe DPS making my videos jump up (shift up a bit) in the first few seconds of the video. As a workaround I want to create a fade-from-black effect to hide the first seconds of the video. Can I create a fade in Media Encoder?

Digital Publishing Suite
Jim Simon wrote:
Adobe DPS

Can´t create new Version from Image with meta/adjustment?

I have some Images (.tiffs) which have Metadata/Adjustments but I can´t create a new Version from them.
Any idea what to do??
thanks appreciate your help!
r

'weeks of work'. that's far too much to just let go of. so...
(re-reading your original message...)
'capturing' means simply importing, right?
but you've made adjustments to the images after import?
and you've added keywords/IPTC/metadata to the images after import?
I'd try:
A. split the tiff project/s into smaller projects (100 images or so) if you haven't already done so. (this'll take a while because Aperture slows down significantly when master images are moved around)
B. export the projects.
C. delete the projects from inside Aperture. there should be none of your 'problematic' tiff images remaining in the library.
D. relaunch Aperture and rebuild the library.
E. import the projects one at a time, rebuilding the library after each import in case there is something in the project's data files that needs fixing.
F. try to do what you want to do with the images in the project.
if everything works ok, then import the next project and repeat steps E and F.

Netbeans creating wsdl file having message with more than one part...

Hi,
I am using netbeans 6.0.1. I made an xml schema, then I wanted to make an wsdl that uses that schema.
I wanted to put in a message more parts(3), and it would not let me. Then, i made the message with just one part, and added the other parts afterwards.
But now, when I try to make a web service from that wsdl, it says that there is no service in the specified wsdl file.
And if i let that message with just one part, it will make the Web Service.
here is the xml schema and the wsdl file:
XML Schema:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://xml.netbeans.org/schema/Abruf38"
xmlns:tns="http://xml.netbeans.org/schema/Abruf38"
elementFormDefault="qualified">
<xsd:complexType name="FormRequest">
<xsd:sequence>
<xsd:element name="newRequest" type="xsd:boolean"/>
<xsd:element name="requestNumber" type="xsd:int"/>
<xsd:element name="vehicleClass" type="xsd:string"/>
<xsd:element name="vehiclesNumber" type="xsd:int"/>
<xsd:element name="prefferedType" type="xsd:string"/>
<xsd:element name="kombi" type="xsd:boolean"/>
<xsd:element name="usageMission" type="xsd:boolean"/>
<xsd:element name="usageEducation" type="xsd:boolean"/>
<xsd:element name="usageGeneral" type="xsd:boolean"/>
<xsd:element name="usageOthers" type="xsd:string"/>
<xsd:element name="eqVehicle" type="xsd:boolean"/>
<xsd:element name="eqDangerous" type="xsd:boolean"/>
<xsd:element name="eqPlaneSpriegel" type="xsd:boolean"/>
<xsd:element name="eqBegrstll" type="xsd:boolean"/>
<xsd:element name="eqMSitzBTruck" type="xsd:boolean"/>
<xsd:element name="eqVerzurrAusst" type="xsd:boolean"/>
<xsd:element name="eqOthers" type="xsd:string"/>
<xsd:element name="bringService" type="xsd:boolean"/>
<xsd:element name="holService" type="xsd:boolean"/>
<xsd:element name="chauffService" type="xsd:boolean"/>
<xsd:element name="otherService1" type="xsd:string"/>
<xsd:element name="otherService1Chk" type="xsd:boolean"/>
<xsd:element name="otherService2" type="xsd:string"/>
<xsd:element name="otherService2Chk" type="xsd:boolean"/>
<xsd:element name="otherService3" type="xsd:string"/>
<xsd:element name="otherService3Chk" type="xsd:boolean"/>
<xsd:element name="activity" type="xsd:string"/>
<xsd:element name="costPayer" type="xsd:string"/>
<xsd:element name="costCenter" type="xsd:string"/>
<xsd:element name="vehicleCost" type="xsd:float"/>
<xsd:element name="chauffServiceCost" type="xsd:float"/>
<xsd:element name="holBringServiceCost" type="xsd:float"/>
<xsd:element name="totalCost" type="xsd:float"/>
<xsd:element name="tripPurpose" type="xsd:string"/>
<xsd:element name="fixTermin" type="xsd:boolean"/>
<xsd:element name="justificationFix" type="xsd:string"/>
<xsd:element name="requestID" type="xsd:string"/>
<xsd:element name="rentalPeriod" type="tns:RentalPeriod"/>
<xsd:element name="carPool" type="tns:CarPool"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="CarPool">
<xsd:sequence>
<xsd:element name="poolID" type="xsd:string"/>
<xsd:element name="poolName" type="xsd:string"/>
<xsd:element name="orgNumber" type="xsd:string"/>
<xsd:element name="vehicle" maxOccurs="unbounded" type="tns:Vehicle"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="RentalPeriod">
<xsd:sequence>
<xsd:element name="rentalPeriodID" type="xsd:string"/>
<xsd:element name="startDate" type="xsd:date"/>
<xsd:element name="endDate" type="xsd:date"/>
<xsd:element name="startTime" type="xsd:time"/>
<xsd:element name="endTime" type="xsd:time"/>
<xsd:element name="startLocation" type="xsd:string"/>
<xsd:element name="endLocation" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Vehicle">
<xsd:sequence>
<xsd:element name="vehicleID" type="xsd:string"/>
<xsd:element name="vehicleClass" type="xsd:string"/>
<xsd:element name="vehicleRegisterNo" type="xsd:int"/>
<xsd:element name="vehicleType" type="xsd:string"/>
<xsd:element name="seatsNumber" type="xsd:int"/>
<xsd:element name="cost" type="xsd:float"/>
<xsd:element name="available" type="xsd:boolean"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Contact">
<xsd:sequence>
<xsd:element name="contactID" type="xsd:string"/>
<xsd:element name="contactName" type="xsd:string"/>
<xsd:element name="telNumber" type="xsd:int"/>
<xsd:element name="faxNumber" type="xsd:int"/>
<xsd:element name="loNo" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Person">
<xsd:sequence>
<xsd:element name="personID"/>
<xsd:element name="department" type="xsd:string"/>
<xsd:element name="serviceNumber" type="xsd:int"/>
<xsd:element name="contact" type="tns:Contact"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Department">
<xsd:sequence>
<xsd:element name="departmentID" type="xsd:string"/>
<xsd:element name="fundsDepartment" type="xsd:string"/>
<xsd:element name="mvwdst" type="xsd:int"/>
<xsd:element name="distributionNumber" type="xsd:int"/>
<xsd:element name="contact" type="tns:Contact"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="formRequestElement" type="tns:FormRequest"/>
<xsd:element name="personElement" type="tns:Person"/>
<xsd:element name="departmentElement" type="tns:Department"/>
<xsd:element name="vehicle" type="tns:Vehicle"/>
<xsd:element name="loadFormReturn" type="xsd:boolean"/>
<xsd:element name="editFormReturn" type="xsd:boolean"/>
</xsd:schema>
Wsdl File:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="userWS" targetNamespace="http://j2ee.netbeans.org/wsdl/userWS"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="http://xml.netbeans.org/schema/Abruf38" xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype" xmlns:tns="http://j2ee.netbeans.org/wsdl/userWS" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNamespace="http://j2ee.netbeans.org/wsdl/userWS">
<xsd:import namespace="http://xml.netbeans.org/schema/Abruf38" schemaLocation="Abruf38.xsd"/>
</xsd:schema>
</types>
<message name="loadFormRequest">
<part name="formRequest" element="ns:formRequestElement"/>
<part name="person" element="ns:personElement"/>
<part name="department" element="ns:departmentElement"/>
</message>
<message name="loadFormReply">
<part name="retVal" element="ns:loadFormReturn"/>
</message>
<portType name="userWSPortType">
<operation name="loadForm">
<input name="input1" message="tns:loadFormRequest"></input>
<output name="output1" message="tns:loadFormReply"/>
</operation>
</portType>
<binding name="userWSBinding" type="tns:userWSPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loadForm">
<soap:operation/>
<input name="input1">
<soap:body use="literal"/>
</input>
<output name="output1">
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="userWSService">
<port name="userWSPort" binding="tns:userWSBinding">
<soap:address location="http://localhost:18181/userWSService/userWSPort"/>
</port>
</service>
<plnk:partnerLinkType name="userWS1">

<plnk:role name="userWSPortTypeRole" portType="tns:userWSPortType"/>
</plnk:partnerLinkType>
</definitions>
The message that Netbeans says when trying to put more parts to the message is:
WS-I Basic Profile Rule R2210: If a document-literal binding in a DESCRIPTION does not specify the parts attribute on a soapbind:body element, the corresponding abstract wsdl:message MUST define zero or one wsdl:parts.
Please...I am desperate, cause I am pressed by time!
Can anyone tell me how can I make it work. Cause it is very common to use a Web service operation that has more than ONE parameter.
I am waiting for your replys!

Hi,
Change the <soap:binding style="document"... to <soap:binding style="rpc"... and see if that works.
I'm not sure how to get <soap:binding style="document"... working yet - I'm not that experienced in web services yet.
Hope this helps and is not too late.
Regards,
Greg Nye

How can I call a DLL from Borland C++Builder that was generated by LabVIEW?

In the linking phase, the linker of Borland C++Builder echoes the message shown below:
[Linker Error] 'Test.LIB' contains invalid OMF record, type 0x21 (possibly COFF)
'Test.LIB' was generated by LabVIEW Application Builder and had been verified working well with Microsoft Visual C++

"Murray Chen" schrieb im Newsbeitrag
news:[email protected]..
> In the linking phase, the linker of Borland C++Builder echoes the
> message shown below:
>
> [Linker Error] 'Test.LIB' contains invalid OMF record, type 0x21
> (possibly COFF)
>
> 'Test.LIB' was generated by LabVIEW Application Builder and had been
> verified working well with Microsoft Visual C++
Hi Murray,
Borland C++ Builder uses a .lib format which is not equal with VC++. You
have to rebuild your .lib by using implib.
Try 'implib library.lib library.dll' to create a new .lib.
Greets
Henrik

Creating projects with more that one exported sequences from different FCP

I am creating a compilation DVD containing 6 different FCP projects. I exported all the projects using the same settings
MPEG-2 6.2Mbps 1-pass 4:3.m2v and .aiff files.
They each burn and play just fine when I use just one in a DVD Studio project. The problem comes when I put them on one track using chapter markers to mark the beginning of each new clip on the track.
It looks as though it is working until I try to play it in the simulator. I can hear the audio, but the picture does not view on any of the clips other than the the first one in the track. If I go back into the viewer and click on a portion of the clip, it will play both audio and video, but once it moves to the next clip (through a chapter marker) the video will not view until I click on the track again.
What have I done wrong? I am a bit of a newby with FCP and DVD Studio.
MacBook Pro Mac OS X (10.4.8) DVD Studio 4.1.0
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

Hi:
Same problem in this thread:
http://discussions.apple.com/thread.jspa?threadID=741368
It seems to be a "kind of bug". If you build and test your project in your hard drive everything plays fine. In another thread (that cannot find right now to link!) someone mention that the problem is the difference in the lenght of audio and video aafter encoding each sequence.
But as I told you at least my projects builds fine.
Hope it helps !
Alberto

How can I create links to other pages in iBooks that will function in PDF?

Hi,
I know some people have asked previously how to create links to other pages of their book within iBooks. I having an issue with this myself that I haven't been able to resolve. I am able to create the links, and they seem to function within the program, however, once I export the document as a PDF file (the format in which I need to have this ebook!), the links seem to be non-functional. Does anybody have a fix for this?
Thank you so much for any suggestions you may have!! I really need to figure this out for my client.
Regards,
Meggyn

Exporting as a PDF does alter/lose/remove certain functions. Adobe Acrobat has its own page navigation system.
A lot of the hidden engine of iBooks Author is basically very similar to building a website! so links and books marks are an "internal" function.
IF you have Acrobat and not just the Adobe Reader, you can make links. I have never needed to try, but I see a working link related index in the many software manuals I have.

Can I split my bill and autopay with more than one credit card?

If I have 3 lines on the same account, can I pay each with separate credit cards in autopay?

My guess is you will not get a definitive answer from any Verizon rep on this and will have to use a try it and see approach to determine the answer.
Obviously, if auto-pay gets applied BEFORE your mother were to make a payment, the entire amount would be paid. With this in mind, there is always the chance it would be either forgotten or put off until after auto-pay had taken care of the bill, resulting in an overpayment which would be applied to next months bill. I doubt you would get any refund for overpayment, simply a credit on a future bill.
As to what would be taken by auto-pay if a partial payment had already been made, I don't know. It COULD be as Ann154 has guessed that the full statement amount would be taken. It could ALSO be that only the account balance would be taken. I don't know which it would be.
Let us know how it works out if you decide to give it a try. Good luck.

Can't type on Flash-based site with more than one window open.

When I try to use certain sites, I think flash, my Macbook will not allow me to type. For example, on the site "Prezi," I can type on my presentation right after I open the file, but as soon as I open a new Safari window and then return to Prezi, I can't. I have experienced this before with the site "Pandora" as well, and can only occasionally type in the search fields there. Please help!

I am having very similar problems. We have three macbooks in the house. Mine is the older version but I have done all the upgrades. The new ones all type fine into flash based programs like prezi and voicethread, whereas I can only paste text into the program.

Can I create a dll from labview with more that one function name

Similar Messages

Maybe you are looking for