Can I delete the request?

Hi,
Some body created report.This stored in one request number.Can I have authorization to delete that report with my login?
Regards,
Sujan

Hi Sujan,
If u want to delete the report first u need to delete the transport request assigned to the report.
For deleting transport request got to SE01 and delete it.
U can the owner of the request in SE01 too.Just change the owner and delete the request from SE01
Goto SE01 >Press Transports tab->give owner name in USER field.
Then press enter.U will get the list of transports under that username.Now press F5 which is shortcut key for changing the owner .Change it to ur id and delete it.
Then from se38 delete the report.
regards,
Lakshman

Similar Messages

Can we delete the request after the Compression?

Hi All,
Can any body tell me, Can we Delete the Request after Compression?
Thanks In Advance
Regards,
Kiran Telkar

Hi
You can delete data by request id even after compression.
Steps:
1. Goto Monitor screen and select the particular request.
2. Click on the icon request reverse posting.
It will make the values of the key figure as "0" of that particular request. This is the way you can delete the contents by request id.
You can also do selective deletion and you will find this option in the manage screen of the data target under the tab contents.
Hope it works.
Assign points if it is usefull.
Regards
Saddy

How can we delete the request after compression? is it possible ?if so how?

how can we delete the request after compression? is it possible ?if so how?

Hi,
You basically have 3 options:
1. Use selective deletion and delete the error records.
2. Do reverse posting and negate the error records.
3. This is my preference. Delete all the data from the cube. RSA1 -> cube -> right click -> delete data -> choose "fact and dim" from pop-up. Now reconstruct all the requests that you need i.e ignore the error request. But before all this make sure you have the PSAs for all the request.
Bye
Dinesh

Can we delete the requests from Infoobject master data

Hello all,
we load master data process chains everyday. now when when we right click on the attribute "Manage" then there are lots of requests there.
Can we delete the older requests from there?
Does having lot of requests there slow down the performance?
Thanks in advance

Ravi,
Yes we have transactional data also loaded. So you mean I cannot delete the requests from Infoobject ?
So can we use the given FM and delete master data lets says once a week ?
I am really confused about this. I tried deleting some of the request from ATTR (Right click on attr and then manage -> select request and delete) and it did actually get deleted so was that wrong thing to do ?
Thanks for reply

Can i delete the Previous request and create the new request for loading

Dear Experts,
I use 0FIGL_V40.Cube in my system. These Cube does not contain delta capability.i mean for every time i wil load Full only.
Here my question is the first day load full load,and second day i want to load the data.But can i delete the previous request and load the data with new request.
Please guide me .
Regards,
Srinivasan.

Hi Srinivasan,
I hope the DS itself is not Delta enabled. If so i think you can delete the contents of PSA. This step can be added in the Process chain before actually loading the FULL IP to DS. Then you can include a step to "Delete Entire data from DataTarget" step in the process chain before actually loading the DTP(Can be Delta/FULL. I dont think there is any impact here since both will bring only one request from DS to DataTarget since PSA will have only one request) from DS to Cube.
Hope it helps!
Regards,
Pavan

How can we delete the released request

Hello,
I am unable to delete the request in transport organizer I am getting following error message
"Request/Task DXXXX0101 Already release (not modifiable)"
Why I want to delete because some objects are in this request those are I am unable to transport from another request because this request has been locked.
Thanks

Hi,
You cannot change the description but you can change the status of request and make it REJECTED in your quality server so that you or someone else will not release it to Production.
To reject a request --> go to STMS > select your request --> press GO TO > QA worklist> reject request.
Hope this helps.
Assgn pts if helpful.
Regards,

Can we delete the archived RS tables data in unix path?

Hi Experts
As you all know that when we perform RS table archiving we setup a Logical file path 'ARCHIVE_GLOBAL_PATH' pointing to the physical path '/usr/sap/<SYSID>/SYS/global/<FILENAME>' in unix system.
Here we have our RS table data in the unix path and this logical path will make sure that there are no problems with requests status.
Now our unix path has grown in size hence we would like to delete some archived data from this path. Could you pls confirm if we delete the data from this unix path will there be any problems with the requests status?
Simply can we delete the RS table archived data from the unix file path??
Thanks!!

Hi All
Any idea about this would be appreciated.
Thanks!!

How to delete the request in Direct Update DSO

Dear Gurus,
I have a situation where I have an invalid characteristic loaded into the Direct update DSO. This is related to Spend Performance Management. This DSO is loaded through a data source with the option Without Archive. So, I cant see any request in this DSO. This DSO will then supply data to another DSO which is standard DSO.
The data Activation job in the standard DSO is failing.
My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO. I have already repaired the data in PSA.
Your Kind help is greatly appreciated.
-Mohan Kumar

You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see request number under the manage tab for direct update dso for any load.
Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's and previous data will get deleted automatically
Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

How to delete the requests in DTP?

hi all,
here i am unable to delete the requests in DTP...
when i am going to delete the request in DTP it simply showing the error:
*cannot lock request DTPR_488BDVJVHQPUUTT3R383DJ55Q OF TABLE 0MATERIAL for deletion*
could you plz help me on this.....

Hi Kiran,
Please go through this thread. Here the same problem has been discussed it detail.
/message/4419400#4419400 [original link is broken]
Following are the steps mentioned in this thread
1. RSA1 -->Info provider >0Material>Right Click-->Display
2. One screen will come , Select the monitor icon to view that (not the one when you go with Manage of 0Material_attr).
3. In the monitor screen you will see Refresh icon , Refresh that
screen , Now the status will change , after 2 -3 refreshes you
will see the request turning to red.
4. Now go back to the manage tab of the 0Material attribute , You
can delete now.
Regards,
Praveen

How to delete the Request Number

Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards

How can we delete the data in e-fact table.

how can we delete the data in e-fact table.

hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha

Need help in deleting the requests from DSO

Hi All,
I want to delete the data load requests present in the dso, I cant do that from the manage tab as it is throwing error because of some dump been loaded into it.
Please tell me the tables names which stores these data load requests of the dso's so that I can delete those requests in the backend.
If is there any way to delete these requests or complete data, please let me know. I cant do these operations from the mange tab/delet data tab of dso as it is throwing the error.
Thanks,
vinay.

Hi,
You can delete the Requests form DSO by useing RSICCONT.
Follow bellow steps:
1. Goto SE16.
2. Give the RSICCONT and Click on Technical Contents.
3. Give the DSO name--> Click on Execuit
it will dispaly the number of requests which it exists.
4. Select your request>Select 'Table Entry' Menu> Select 'Delete'
Regards,
Suman.

Delta Update in data Target Must be Deactivated Before deleting the request

Hi Experts,
I got an error while deleting a request from an ODS target. In breaf Let me explain..
Today one data load got failed. The data source 0CRM_SALES_CONT_I ( CRM Sales Contract : Item ) is updating data to 4 ( Four ) ODS targets.
So I forcefully made the request red to delete the request from the targets. But I unfortunately deleted another request without making it RED, I reconstructed it. Everything is looking fine.
   But the thing is , when I tried to Delete the ERROR request from the other two related Data Targets ( 0CRM_CN2P and   0CRM_CNT1) , I fount these warnings..
                --> Request 140522 already retrieved by Data Target BWPCLNT600
                --> Delta update in Data Target BWPCLNT600 must be DEACT. before deleting the request.
                --> Do you want to DEACTIVATE the Delta Update in the Data Target BWPCLNT600   ?
   I clicked on YES.
I am having doubt, will it make any problem in future ? Or How Can I Resolve this problem   ?
Thanks,
Utpal.

Hi shanthi bhaskar ,
Thank you. But the client no which I have mentioned is not our. That is different, I have given for the example. Bur the DS and ODS name are as it is.
   and Shanthi, Won't be any problem as I got the warning as mentioned above.. ?
Thanks,
Utpal

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

Problem in deleteing the request

H All,
We ran a load to Master Data (info provider)object.The Load got failed due to invalid data entries.Wheb i tried to dele that particular request from infoprovider .Request is not getting deleted and got folloed msg.
You want to delete request(s) from InfoProvider 0AUVEHICLE
The data target is a master data table
The records in the request are no longer transparent in the table
Only the control entry that shows that the request has been updated
already, is deleted.
This means that the request can be updated again.
Can you please help me in deleting this request.
Kranthi

Kranthi,
This means that even though you delete the request - the master data entries still remain. This happens for Master Data.
You will have to delete the same and reload the data back in.
For example if you data load has :
1|BCD|Sales
and this is part of your master data load , even if you delete the request the entry is not deleted - the entry still remains - you can delete the request in the manage atb and reload the data once again.... SAP is just givig you information that Master Data Objects are not like a DSo where if you delete the request the entries go away. This is because the Infobject tables do not have any request based data - al the data gets updated into the same tables and once you load the data - the data remains there till a manual delete is triggered and request based deletion is not possible...

Can I delete the request?

Similar Messages

Maybe you are looking for