Can I DL a file and separate fields with a character (pipe, comma, etc.)?

Hi,
I am trying to download a file using the function GUI_DOWNLOAD, but there does not seem to be a parameter which will allow me to use separators for the fields...like a comma or pipe character?
How do I do this, or is there some other function that I can use?
Thanks,
Andy

Hi,
Did you check the option
(WRITE_FIELD_SEPARATOR) TYPE  CHAR01 DEFAULT SPACE
Separate Columns by Tabs in Case of ASCII Download
Description
In the downloaded file, the columns are separated by tab characters (cl_abap_char_utilities=>horizontal_tab). You should use this setting if you want to upload the data again from the file, because this is the only way to identify the individual columns.
The parameter makes sense only for the FILETYPE values ASC, DAT and IBM; for DAT it is set implicitly.
Value range
'X'   : Write separator.
SPACE : Do not write separator.
Default
SPACE
Cheers
VJ
Edited by: Vijayendra  Rao on Jun 22, 2009 11:04 AM

Similar Messages

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • "Windows Easy Transfer can't transfer your files and settings." Why?

    I saved my files and settings from a previous installation of windows 7 to an external hard drive using windows easy transfer. Now when I try to transfer those files and setting to my new installation I get the following message:
    Windows Easy Transfer can't transfer your files and settings.
    The message pops up only a few seconds after the transfer begins.
    Why is this?! I need those files and windows has screwed me. Everything is basically the same as before I reinstalled. Same computer, same windows 7 installation just recovered to factory settings. Same system language as before. BTW I'm on a Toshiba L505 laptop
    running Windows 7 Home Premium.
    I have tried all the usual suspects such as a clean boot and uninstalling my antivirus to rule out third party interference. I have more than enough space on both my computer and on the external hard drive. I have tried only transferring a user account a
    few MBs large. I have reinstalled the OS twice just in case something went wrong there. I have clicked on the .MIG file directly. All lead to the same error message.The transfer file seems to be intact and not currupt
    Is there another software other than WET that can use the same transfer file that WET created to restore my files? Please help me solve this if you can or at least point me in the right direction because right now I'm clueless. I can't emphasize how important
    those files are to me. I've searched for solutions on several forums and it seems that this is a problem people have been having for years now and windows hasn't provided an answer yet.
    An interesting note, When I reboot the laptop after trying to do the transfer, a new user account appears at startup alongside the one I normally use. This new user account has the same unique name of the user account I am trying to restore but that's where
    the similarity ends. All the settings for this account are default settings and empty folders. What does this mean?

    Hi Vincent, like I said I tried all of that already and it failed. Thanks a lot for trying to help though. Imperfect1, so sorry I took so long to reply. No that's not the case. I was trying to restore from x86 to x86.
    Well, I finally gave up. I've scoured the internet for a solution. You'll probably find duplicates of this post all over. This has been a known software problem with Windows Easy Transfer for years and Microsoft has done nothing to fix it or warn users of
    the risks. Shameful!
    Anyway, I managed to recover my files with this life saver of a program here>
    http://www.visser.com.au/blog/migrecover-for-microsofts-windows-easy-transfer/
    MigRecover Utility for Microsoft's Windows Easy Transfer.
    I can't express how grateful I am to the developer and the host for the download. You guys are the most awesomest people ever. Cheers.
    Here's how you modify the syntax in commmand prompt if you used a password to protect the mig file in WET>
    http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/68910c1a-3c4b-47af-bb22-0e7ec6f2054f/
    Just remember to change the source drive letter in "C:\SaveData.MIG" to the actual drive it's stored on if your MIG file is on an external drive like mine was; whether it's E:, F:, G: or whatever.
    Good luck to anyone with the same issue who stumbles upon this post. I hope it helps you as it did me.
    AsdyAsks

  • Can not open JPEG files and can not create JPEG files from other software

    Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
    When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
    checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
    From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
    is created (I can see its name in the directory I created it).
    I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
    I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
    I will appreciate your assistance.
    Avi T. 2014

    Hi,
    Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
    I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    Karen Hu
    TechNet Community Support

  • I've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

    i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

    I've had all kinds of trouble keeping my iTunes software current over the past year, but have found the easiest way to remedy the issue is to simply download the latest version of iTunes as though I am a first-time user and then just install it into the directory my current version of iTunes is using. Doing this has allowed me to update my software without losing any of my media/data. Hope this helps! Best of luck!!!

  • I do not have blackberry messenger in my phone, Can i get a file and install it on my phone

    I do not have blackberry messenger in my phone, Can i get a file and install it on my phone

    Connect your device via USB-cable to the computer.
    Launch Internet Explorer
    Open this address: http://na.blackberry.com/eng/services/devices/
    Click on "Update Now"  button
    Popup will be displayed, now open the applications list, find BB Messenger in the apps list and check it to install.

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

  • Have an older Macbook Pro 10.6.8 tried to update it to XMavericks. Discovered that my microsoft apps are not compatible. Can I keep my files and convert them?

    Have an older Macbook Pro 10.6.8 tried to update it to XMavericks. Discovered that my microsoft apps are not compatible. Can I keep my files and convert them?

    Use a product such as LibreOffice, the iWork applications, or Microsoft Office 2008 or newer to open them.
    (107914)

  • When i browse OS X Server (Mountain Lion) Wiki through webdav i can't open any files and they all are 4kb in size?!

    When i browse OS X Server (Mountain Lion) Wiki through webdav i can't open any files and they all are 4kb in size?!
    Why is this ... is my configuration wrong in some way? I just put a tick mark in the

    They seem to open fine from Numbers and Pages on the iPad.
    This only happens on OS X macbook pro when i "Connect to server" from Finder.

  • I installed a game, where can i find the files and maps? where does iMac store this data?

    I installed a game,Now I need to add some files however, I cannot find where iMac stores it.. where can i find the files and maps? where does iMac store this data?
    thx alot
    erik

    Depends on game, i would look first on the game file itself, right click (or ctrl click) the game file you installed (Applications?) and select show package contents, its usually a application bundle, as in basicly a folder where the application and the required files and subfolders are.

  • Can iTunes convert a file and replace the old file with the new one?

    I am trying to convert my wav files to Apple Lossless to save some space. How can I convert the files and make them replace the old files? Right now it just converts new files so that I end up with two files. I have thousands I want to convert and just replace the old ones.
    I have an external program that will do it for me, however if I go that route then when my ITunes files are converted to lossless files I need to re-link the files as they show up with the ! showing they are missing. That would mean manually re-linking every song, which would take forever unless there is a way to mass re-link all the files.

    iTunes does not see the newly created files as the same file because they are not the same file.  They are new, different files.  If you have a track that is 1234.wav and you create 1234.mp3 it simply isn't the same file and you can't trick iTunes into thinking it is.  iTunes will handle it as a brand new file.
    Check Dougscripts web site for scripts which help modifying tag data.  However, I suspect you won't find any doing exactly what you want doing.  Some tag data are only accessible by iTunes itself.
    As for playlists, there's things you can try though they may be more effort than they are worth.  For example, you could add a special code for each playlist to some element of a tag (e.g., grouping).  Convert the file, then make a smart playlist selecting for the code you added to the group of tracks in the old playlist.  If you have hundreds of playlists with a dozen tracks each this will be a grand nuisance.  If it is a handful of playlists with hundreds of tracks each this might be worth it.
    Another way to preserve playlists would be to edit the .xml copy of the iTunes library file, replacing ".wav" with ".mp3" or whatever format you are using.  However, this won't help with play counts because that is only stored in the .itl copy of the file which you cannot edit.

  • Create Multiple Signature and Date fields with a custom Toolbar Button

    First off, thanks in advance!  I am a scripting newbie and I am trudging my way through with very little experience with scripting of any kind.  I am good at taking other's scripts and forming them into something I need, but I can't seem to find anything to do what I want.
    Using Adobe Acrobat X, I am trying to create a toolbar button that I can press to create multiple signature and date fields with predetermined locations.
    Below is the script I have that is working to create just a single signature box, but I can't seem to figure out the exact syntax to have that same button create multiple fields.  In total it is 9 signature fields and 9 date fields need to be created.  If you can just give me an example of what the button would look like with multiple scripts?  I was assuming I would set up multiple variables and then in the cExec property of the toolbar button I could just call out all of those variables? 
    var sigswm = "addField('sigSWM', 'signature', '0', [108, 198, 494.64, 72])"
    app.addToolButton({cName: "dotbutton", cExec: sigswm, cLabel: "Place Signature and Date Blocks",});
    Thanks in advance for any help you can provide.
    Billy Sweeney

    Thanks!  That was probably the only thing I didn't try.
    I do have one more question.  What I want is when the signature field is clicked it fills out a specific date field. I beleive the script I want would be:
    var currentTime = new Date()
        var month = currentTime.getMonth() + 1
        var day = currentTime.getDate()
        var year = currentTime.getFullYear()
        var signingTime = day +"/"+month+"/"+year
        var f = this.getField("dateSWM"); 
        f.value = signingTime;
    I found this on another thread that mentioned it could be placed in the Signed tab of the signature properties dialog.  I am assuming it would be placed in my button script file as a setAction script for each signature, but I am not real sure exactly where or how?

  • Lost ability to right click multiple files and choose 'open with'

    In XP I can select a bunch of mp3 files, for example, right click and choose 'open with...' whatever application I want.
    In windows 7 I only get 'open with' in the context menu on single files. How do I enable 'open with' for a selection of files? Please tell me Windows 7 hasn't disabled this useful behaviour.

    Hi,
    You can change the register key to realize the function.
    For example, your mp3 player is windows media player, you can copy the following content (without quote) to the notepad and save it with the “.reg” extension.
    The context is below:
    Warning: While this procedure might solve the issue or problem, serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. For more information about modifying the registry, see Microsoft support article 256986.
    “Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\*\shell]
    [HKEY_CLASSES_ROOT\*\shell\open with]
    @="open with player"
    [HKEY_CLASSES_ROOT\*\shell\open with\command]
    @="\"C:\\Program Files\\Windows Media Player\\wmplayer.exe\" \"%1\""
    [HKEY_CLASSES_ROOT\*\shell\removeproperties]
    "ProgrammaticAccessOnly"="Apartment"
    [HKEY_CLASSES_ROOT\*\shell\removeproperties\DropTarget]
    "CLSID"="{09a28848-0e97-4cef-b950-cea037161155}" ”
    You should change the bold text with the path of your player. After you’ve changed the key, you can right click the chosen MP3 files and choose “open with player” to play the music.
    If you still have some problems, please post here.

  • HT204053 Can you sync pages files on different devices with different apple ids?

    Can you sync pages files on different devices with different apple ids?  I have a personal iPad and one given to me for work. They are set up with two different apple IDs.  I do all of my lesson plans in pages.  I want to be able to create plans on both devices, but need to know if there is a way to sync the files without emailing, etc.

    Welcome to the Apple Community.
    No, that's not possible. A better way of working around this than emailing the documents to yourself is to use a third party storage solution such as Dropbox and a webDAV server to upload the documents.

  • Can i download google map and then interface with labview?

    i intend to interface labview with google map and indicate my required position on it.i need help on how to accomplish this?can i download google map and then interface with labview?

    Hi,
         The Example avalable on following link (C:\Program Files\National Instruments\LabVIEW 2009\examples\comm\axevent.llb\ActiveX Event Callback for IE.vi) on your PC, and using of Googlr map API u can indicate your position.document are avalable on following link (http://code.google.com/apis/maps/documentation/staticmaps/)
    I hope this is help for u..
    Siva
    Sivaraj M.S
    CLD

Maybe you are looking for