Can I get my thinkpad t420 serviced in India?(it is in warranty and I bought it in the US)

Hi,
I got my work laptop a T420  along with me to india . I am here on a project for another 4 months. It is under warranty now.
Can I get it repaired here in India under warranty , or should I ship it to the US for getting it repaired?
It is my work laptop and it has been giving me problems lately.  Does not shut down , does not respond after it goes into sleep mode. I checked everything, I have up-to-date drivers and also up-to-date BIOS. 
I have used system diagnostics tool provided by lenovo and ran comprehensive tests on it. It does not show any problem. It behaves the same regardless of OS.I have formatted the hard drive and re-installed a fresh OS  to check if  OS is the problem.
It would be great to get this problem resolved asap so that I can use it for my work , or else it is going to hurt my work.
I have proudly owned 4 thinkpads till now since 2006 and none of them gave me such a problem.
I would appreciate any response or suggestions in this regard.

Hello and welcome,
You can use the IWS lookup tool to determine international coverage and contact information:  http://support.lenovo.com/us/en/iwslookupthink
You'll need the 1st 4 digits of the MT-M - on a sticker on the bottom or in the battery compartment.  My T420 "4178" shows as covered in India.  YMMV, but I'd expect a T420 to have international coverage.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Can't get iphone4S to take my new email address.  My compter and ipad have it but the iphone keeps the old address.

    Haven't found the way to change my email (ID) on the iPhone even though the computer and ipad have it.

    Hi Have you change this at Apple .com/ support/I'd Try this Sign out of ITunes then Sign back in with new details on iphone. Cheers Brian

  • System Events got an error: Can't get current configuration of service?

    I'm trying to connect/disconnect services through apple script, here is the error I'm getting for "Ethernet" "AirPort" (these services are configured in services tab)
    I am able to manualy On/Off these services without supplying admin password, therefore it might not be privilages issue.
    *Error message:*
    *System Events got an error: Can’t get current configuration of service id "099F7D16-4F3A-4D49-9111-A4DF0A645378" of network preferences.*
    Scipt used:
    tell application "System Events"
    tell network preferences
    tell current location
    get the name of every service
    set myService to service "AirPort"
    if exists myService then
    --get service properties of myService
    set isConnected to connected of current configuration of myService
    if isConnected then
    disconnect myService
    repeat while (get connected of current configuration of myService)
    delay 1
    end repeat
    end if
    connect myService
    end if
    end tell
    end tell
    end tell

    Hi Damian and welcome to Apple Discussions!
    One suggestion: try
    tell application "Finder" to open item 1 of docs
    (without 'using "Corel Painter 8"')
    As far as the Finder is concerned, "Corel Painter 8" is just a string of characters. And telling the Finder to open a file is just the same as double-clicking it: the Finder knows which app to use - as long as these are native Corel Painter 8 docs.
    Hope this helps,
    H

  • Hello, in december 2014 a bouth photoshop elements and know, sinds i downloaded something else from adobe, i can't get on it any more, i have only a trial version and in 30 days i need to pay. How is this possibel?

    Hello, in december 2014 a bouth photoshop elements and know, sinds I downloaded something else from adobe, I can't get on it any more, I have a trial version now and in 30 days I have to pay for it. How is this possible?

    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion?

    Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion? The Apple website for this is "under construction" for weeks now...
    Thanks,
    [email protected]

    Certification test for OS X 10.7 Lion are not available yet. I assume they will be nearly identical to the test of 10.5 and 10.6. Hopefully, the reason the certification website has been down for a while is that they are updating it with the new information. Though I really wouldn't expect any 10.7 certification test to be available for 2-4 months. Peachpit Press didn't publish their training material for 10.6 until October even though 10.6 was released in August.
    As far as the 10.6 Certifications:
    Certified Support Professional, 10.6 requires the 9L0-403 exam.
    Certified Technical Coordinator, 10.6 requires the 9L0-403 as well as the 9L0-510 (Server Essentials) exams.
    The information for the Certified System Administrator, 10.6 is "hidden" on the integral7 website but according to this Wikipedia entry, you need to pass the 9L0-510 Server Essentials exam as well as these three:
    Directory Services
    Deployment
    Security and Mobility

  • My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    My iPhone will
    not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    Try resetting your network settings.
    Settings>Genenal>Reset>Reset Network Settings.

  • I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connecti

    I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connection is fine Safari works and I can access all sites. I have an iPad 2. Any help on this will be greatly appreciate.  iPad 2, iOS 8.3

    This is an ongoing problem as you will see by searching the forum. 
    Out of curiosity, do you have 2 step verification enabled?  It was recently extended to include iMessage & FaceTime & I'm wondering if it might be causing some of the issues that some users are experiencing.

  • How can I get iTunes on my I-TV to recognize my new email and password?

    How can I get iTuens on my Apple TV to recognize my new email and password? I changed it months ago and it works on my other devices but not apple tv. Thanks.

    Sign out of the old Apple ID and sign in with the new one.
    Hopefully the Apple ID was merely updated instead of a new one being created.

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • How can I get an ucropped image in a Custom Package when using Stroke and/or Border??

    How can I get a picture in a Custom Package that has a Stroke and/or a border and get the image shown fully, and not cropped in one way or other?
    When I add the stroke/border it adds them inside the cell, thereby altering the ratio of the area for the picture inside it, which crops it in some way. How can I get the image to be uncropped?  The controls available seem to all be for the ration of the outside of the cell, but my image is inside the stroke/border and nothing seems to work on it directly ... 
    Many thanks,
    Gary

    Perhaps I misunderstood your requirement.  I have been frustrated by LR print module and labs effectively squeezing individual shots into existing frames. So I have used LR2Mogrify to export (and then re-import) a 'new image' which manages the discrepancy between a crop and a cell of a different aspect ratio by adding padding - usually 'white' - around the image to a canvas corresponding to cell dimensions. Adding stroke borders can be accomplished in Mogrify inside or outside the image.  A custom package, with multiple cell dimensions can be populated with images created in the corresponding aspect ratio(s) for the relevant cells.
    I'm not aware of a way of automating the creation of cells in a page to dimensions which change with the crop as discovered  - drag and drop images onto a blank page creates cells of the same standard size.  

  • I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh

    I can't get my me mail to work on iCloud keeps rejecting my user id nothing works on the pad or pod either to do with mobile me aaaaaaaaaaaargh
    Apple - please please let us know what is going on

    ewaller wrote:
    fazio96,
    Could I prevail upon you to come up with a better thread title?  I resisted my first inclination to move the thread to "Dustbin"; but I will say the title does little to inspire us to help.   You may wan to read the article linked in my signature.
    Thanks.
    I'll change it now. I just realized it sounds rough, but I was mad because I couldn't get it work, it isn't anyone's fault, sorry
    EDIT: I got it to work at an usable state! By using the 8192cu driver on the AUR and the suggestions in the comments about disabling power-save, I got it to be usable. It now has up to 8% packet loss, not 30-40% like before, and the ping spikes are now 300-400 ms and less frequent, not 1000-1200ms. It's not working really well but now I can at least surf the web. Thank you all for the patience.
    EDIT 2: after testing more I realized it still disconnects every few seconds when I'm far from the AP. However, when connected, I still have very strong signal. If I use it on windows or another distro it doesn't disconnect. I tried compiling the driver from realtek by myself using the istructions in the second post but I don't know how to fix some compile errors, so I decided I'll stick with my usb dongle. Maybe someone will find a better solution.
    Last edited by fazo96 (2013-09-30 16:08:10)

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

  • How can I get a reference to all controls on a front panel of one type )for example of the type Text Ring?

    I'd like to set the strings[] property of all the Text Ring controls on a front panel at once without creating a property node for every text ring. How can i do that?

    > How can I get a reference to all controls on a front panel of one type
    > )for example of the type Text Ring?
    >
    > I'd like to set the strings[] property of all the Text Ring controls
    > on a front panel at once without creating a property node for every
    > text ring. How can i do that?
    This is likely more complicated than making property nodes for each
    ring, but you can do it. Make a subVI that takes in a panel reference,
    reads the array of control references, loops through them looking for
    rings, and modifying the Strings[] property on each ring.
    The part of this that will probably be the least obvious, when you
    have an array of control references there are two ways to find out
    if an element is a ring. You can read the classID and compare it
    to the cla
    ssID of a true ring control. An alternative is to cast
    the control reference to a ring control using a Cast to more specific
    node and wire the error out to a case structure. The error case is
    where the objects that aren't rings will go. The success case case
    where you will have a valid ring refnum that you can use to modify
    the strings.
    Greg McKaskle

Maybe you are looking for