Can I have both Nano and Shuffle on one computer/same user account?

I have a Nano that I use daily and also just purchased a Shuffle to take to the gym (I'm a bit paranoid about the Nano getting broken, lost or stolen). I'd like to have some of the same music on both devices. Can I do that? (I've yet to plug in my Shuffle in case one overrides the other.)

Hi MNRobin,
Yes you can! I suggest reading Knowledge Base Document #200432. If you want, you can select which songs go on which iPod by Manually adding songs, playlists, podcasts and audiobooks.
I hope that helps,
Jon

Similar Messages

Can i have both leopard and snow leopard on the same partition?

I have a MacBook Pro with 10.5. I want to install 10.6 and keep 10.5 on the same drive. The drive has only one partition. What problems might I encounter.

Yes you can, you could put the two in separate partitions to be safe.
Unless, as Michael noted, you use VM software to run a different OS on the same partition, impossible is the word you're looking for. Not safe.
He asked if you can or not. not safety advice. It's a simple yes or no. and yes you can. For all I am concerned, the man is an evil genius building an IT bomb before his final day after an untimely layoff. It's a yes or no question man. Did not ask your opinion on the highly unlikely event that he is able to go through the initial system checks and failsafes, and installation, and then the cosmic chance of success. If you notice, the only thing I stressed was to get your backups. After that, go nuts. It's how you learn.
Trigger a dependency issue that the OS tries to correct and it snowballs into a mess.
Is that supposed to mean something? Anything?
Are you by chance one of the apple-sticker-prius jockeys who deliberately close the door on me in the far left lane because you feel that every situation has a moral right and a wrong, and you're left to opine? Except what's happening is I'm on my Yamaha and a you're technically attempting murder? I"m used to this guy.
ALright say your mac OS =64 bit, but the hardware inside is 64 and 32. Off the top of my head- the Intel GMA chipsets are still running 32 bit drivers regardless of OS. Install 64bit on that machine and I think you're going to have issues with faulty driver dependencies where GMA spots a newer driver on the old 32bit partition vs. install disc. Youcan't fix this. By the time you start seeing errors, the OS has already tried fixing the dependencies by following down the 32 bit trail and dumping its own core. Try it if you don't believe me.
you want to fill the disk with zeros.
kadaggett (or anyone for that matter), do not follow this advice. It won't make a spit of difference how fast your Mac will operate. The only purposes for a zero erase is to either try to map out bad blocks that have developed (in which case, you should replace the drive), or you're making it much more difficult for anyone to recover deleted data.
Right off the bat I think you should stay away from SSDs or perhaps run them in IDE mode to be safe. Or you'd bereplacing them every other day. WHat I"ll be doing is allocating 10% to cache, playing with the trim, keeping it <50% full, and using 60GB cache to run my OS. You do what you like. Send me your old HDD's though. Ever try formatting an SSD? And then it actually boots as if you hadn't formatted? Hey you thinkinn maybe sentient Macs experience phantom limb syndrome?
I find and fix bad blocks and realize 90% of them weren't bad. I don't know maybe the ghosts are back. But maybe it was static shock that temporarily crippled a few blocks. Can't know until touch it with a 0. And there is nothing wrong with 0s. This is not 1987 and you are not going to hurt your What? Don't order people to follow this or that advice - are you like the hall monitor around here? WHy do you tell people what follow? Why do you assume they are here to follow? Do you feel like you just led people to the right path? You feelin good? Because I think we both look like ********.

Can I have both V6 and V5 loaded at the same time?

I am going to keep V6 but would like to reload V5.
Is this possible running both versions? When updates for V6 are available I would like to give them a try. But for the time being almost all of my iMovie videos have Gee Slick transitions. Many crash V6 or just turn black and will not render. If it is possible to run both versions I would like to know if there are any pit falls I should look out for.
PowerPC G4 Dual1.42 GHz Mac OS X (10.4.4) 2 GB DDR SDRAM

Yes, there are several posts here about how to do this. Very quickly . .
If you have already install v6, you will have to remove it.
Then, install v5 and rename the app, so v6 will not write over it.
Now reinstall v6.
Check other posts for how to uninstall.
Clay

Can we have both 9i and 10g db running on the same machine

Hi,
I want to to exp/imp upgrade of my 9i db to 10g db.
Can I have both 10g and 9i installed on the same server?
Thanks,
Kavitha

Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

I bought my daughter an ipod. Can I have two seperate itunes libraries on one computer? If so, how do I set this up?

I bought my duaghter an ipod. Can I have two seperate itunes libraries on one computer? If so, how do I set this up?

I followed these instructions & have created a new library file. However, all my music now appears in the new library as well as my own. (I bought my daughter an ipod nano for christmas & want to separate itunes libraries on one computer). How can this be so difficult?

I have 2 ipads and my iphon on the same icloud account and it wont let me back it up cause i dont have enough space so I want to move my iphone over to a new icloud account i made with a new apple id but i dont want to delet the ipads off their account?

I have 2 ipads and my iphone on the same icloud account and it wont let me back it up cause I dont have enough space. So I want to move my iphone over to a new icloud account with my new apple id that i made but i dont want to delete the ipads off the old account just move the iphone to the new one. How do I do that I despreatly need help!!!

To migrate your phone to a new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep on the phone, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your other devices won't be effected by this), provide the password to turn off Find My iPhone (if using iOS 7) and choose Keep on My iPhone when prompted . Then sign back in with your new Apple ID to create your new account and choose Merge to upload your data to the new account.

Can we have oracle database and gateway for SLQServer on same machine

Can we install oracle database and Gateway for sQLServer on same machine>?
If yes, How does the listener files in gateway home (EG: C:\product\11.2.0\NETWORK\ADMIN) and oracle home (EG: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN) look like?
Where will we give dg4msql details in tnsnames and listner files?

Here is the output of starting both the listeners. This is output when i appended listener1 settings in Oracle_home listener.ora file.
C:\Users\Administrator>lsnrctl start listener
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 03-DIC-2012 04:46
:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Avvio di tnslsnr: attendere...
TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Il file dei parametri di sistema Þ C:\app\Administrator\product\11.2.0\dbhome_1\
network\admin\listener.ora
Messaggi di log registrati in C:\app\Administrator\diag\tnslsnr\WIN-77CAQGHJSA2\
listener\alert\log.xml
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521
STATO del LISTENER
Alias listener
Versione TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Produ
ction
Data di inizio 03-DIC-2012 04:46:20
Tempo di attivitÓ 0 giorni 0 ore 0 min. 5 sec.
Livello trace off
Sicurezza ON: Local OS Authentication
SNMP OFF
File di parametri listenerC:\app\Administrator\product\11.2.0\dbhome_1\network\a
dmin\listener.ora
File di log listener C:\app\Administrator\diag\tnslsnr\WIN-77CAQGHJSA2\list
ener\alert\log.xml
Summary table degli endpoint di ascolto...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Summary table dei servizi...
Il servizio "test" ha 1 istanze.
L'istanza "test", stato UNKNOWN, ha 1 handler per questo servizio...
Il comando Þ stato eseguito
C:\Users\Administrator>lsnrctl start listener1
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 03-DIC-2012 04:46
:23
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Avvio di tnslsnr: attendere...
TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Il file dei parametri di sistema Þ C:\app\Administrator\product\11.2.0\dbhome_1\
network\admin\listener.ora
Messaggi di log registrati in D:\product\11.2.0\tg_2\diag\tnslsnr\WIN-77CAQGHJSA
2\listener1\alert\log.xml
Ascolto su: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522
STATO del LISTENER
Alias listener1
Versione TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Produ
ction
Data di inizio 03-DIC-2012 04:46:29
Tempo di attivitÓ 0 giorni 0 ore 0 min. 5 sec.
Livello trace off
Sicurezza ON: Local OS Authentication
SNMP OFF
File di parametri listenerC:\app\Administrator\product\11.2.0\dbhome_1\network\a
dmin\listener.ora
File di log listener D:\product\11.2.0\tg_2\diag\tnslsnr\WIN-77CAQGHJSA2\li
stener1\alert\log.xml
Summary table degli endpoint di ascolto...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
Summary table dei servizi...
Il servizio "dg4msql" ha 1 istanze.
L'istanza "dg4msql", stato UNKNOWN, ha 1 handler per questo servizio...
Il comando Þ stato eseguito
C:\Users\Administrator>sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Lun Dic 3 04:46:34 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> conn system/Manager1@star
Connesso.
SQL> create public database link test2 connect to "sa" identified by "pwd"
using 'dg4msql';
Creato database link.
SQL> select count(*) from prefer@test2;
select count(*) from prefer@test2
ERRORE alla riga 1:
ORA-28545: errore diagnosticato da Net8 durante la connessione a un agente
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: precedente 2 lines da TEST2
Output of tnsping from oracle_home
C:\Users\Administrator>tnsping dg4msql
TNS Ping Utility for 64-bit Windows: Version 11.2.0.2.0 - Production on 03-DIC-2
012 05:01:28
Copyright (c) 1997, 2010, Oracle. All rights reserved.
File di parametri utilizzati:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
╚ stato utilizzato l'adattatore TNSNAMES per risolvere l'alias
Tentativo di contattare (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522)) (CONNECT_DATA = (SERVICE_NAME = dg4msql)) (HS=OK))
OK (0 msec)
tnsnames.ora file at D:\product\11.2.0\tg_2\NETWORK\ADMIN
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA = (SERVICE_NAME = dg4msql))
(HS=OK)
C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN
LISTENER_test=
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA = (SERVICE_NAME = dg4msql))
(HS=OK)
test=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = test)
)

Can I have both IPS and Content security on ASA5510?

Hi expert
We want to have a ASA5510 with both IPS function and Content Security feature, while I checked on Cisco website, looks like ASA5510 or 5520 only have one SSM slot, so I can only use either AIP module or CSC module, does it mean I can not get both features at the same time.
Right now I want to have IPS function and anti-spam, anti-virus, antiphishing, content filtering, URL blocking such feature, so what do I need to buy to have all of these function in one device?
Thanks

Dear Echo Chan .
You can go with CSC module for your requirement , most of your requirement could be satisified by CSC module except IPS functionality
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_qas0900aecd8040397e_ps9774_Products_Q_and_A_Item.html
The Cisco ASA 5500 Series CSC-SSM is an add-on services module for Cisco ASA 5500 Series appliances. It delivers industry-leading threat protection and content control at the Internet edge, providing comprehensive antivirus, anti-spyware, file blocking, anti-spam, anti-phishing, URL blocking and filtering, and content filtering services.
HTH
Thks
Santhosh Sarav

Can I have an ipod and shuffle on the same computer?

I currently have a ipod 6GB on a laptop. We just purchased the ipod shuffle can I use it on this same computer? Do I need to change any software? Thanks

These links should help:
Natalie Beresford: Multiple iPods/iTunes Installations
How to use multiple iPods with one computer
How to share music between different accounts on a single computer

Can i use both windows and OS X in the same hardisk

I want to install windows 7 ultimate(64 bit) on imac but if i install it can i use both OS X and windows in the same hardisk or do i have to plug in an external hardisk and can i still use OS X or only apple??

Welcome to Apple Support Communities
Of course. You can install Windows and OS X in the same hard drive, because that's the purpose of Boot Camp.
I see you are using OS X Mavericks, so you can install Windows 7 or 8 in Boot Camp > http://support.apple.com/kb/HT5634?viewlocale=en_US Then, follow these steps to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
After installing Windows, your Mac will start up in Windows by default. In order to choose in which operating system you want to start up, just hold the Option (Alt) key while your computer is starting up.
If you do not want to do heavy tasks in Windows, another option you should consider is to install Windows in a virtual machine with the use of an app like VMware Fusion, VirtualBox or Parallels. This way is more secure and there's no risk to harm your Mac.

Can you have 2 apple tvs working with one computer - both active at the same time?

Can 2 Apple TVs - Generation 3 - work off the same computer?
I can't seem to get the 2nd Apple TV to find the network yet I have full signal and the Network name is correct.
Can they work at the same time using different content?

Hi SwedelostinAmerica,
Welcome to the Apple Support Communities!
The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
The following article explains Bluetooth pairing and usage. Please use it as a reference.
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Have a great day,
Joe

IPhone: Can I have Exchange email and MobileMe email on the same iPhone?

I just got an iPhone 3G from my company. At work, we use Microsoft Outlook, so that's what I have on my iPhone. At home I have a Mac and I use a .Mac account that has been upgraded to MobileMe. I'd like to be able to access my personal MobileMe email on my iPhone without messing up my Exchange email. Is this possible?

Yes. On my iPhone I currently have my Exchange account via ActiveSync, as well as my MobileMe account. In addition to email, I can also see my MobileMe Home and Work calendars, along with my various Exchange calendar folders, either separately or merged (with color-coded dot to let me know which one came from which account).

Can you sync both iCloud and Google Calender at the same time?

Hi all,
I am an iCloud/MobileMe user, but have a Google Calender at work with other colleagues.
Is it possible to sync both to my iPad/iPhone at the same time?
I am yet to find a way to do this.
Thanks

tkoe wrote:
Hi all,
I am an iCloud/MobileMe user, but have a Google Calender at work with other colleagues.
Is it possible to sync both to my iPad/iPhone at the same time?
I am yet to find a way to do this.
Thanks
You can subscribe to both calendars on your iPhone/Pad etc, you can also subscribe to them on your Mac

Can I have both Nano and Shuffle on one computer/same user account?

Similar Messages

Maybe you are looking for