Can I "hide" form queries that the respondent did not answer?

In the e-mail summary recap and the PDF report that is generated after each submission I get a print out/report listing all fields (70+) despite the fact that the user only has to answer/complete approximately 20 fields to complete the form. In other words, I only want to see what the user actually responded to/selected, not ALL of the possible selections. Please help - this problem is causing us to have to print out a 48 page report for every response (as opposed to the 2-3 page report that it should be).

We currently do not support this. You can use the "Create an idea" action to submit a feature request that can be voted on by other FormsCentral users.

Similar Messages

I made a purchase in an app. The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it". I was charged twice, but only received it once. What can I do?

I made a purchase in an app. The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it". I was charged twice, but only received it once. What can I do?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

HT1386 When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is chargin

When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is charging.
Why does this happen? I have tried several cables and it does the same thing.

Try:
https://discussions.apple.com/message/15519179#15519179

Hi i just wanna ask about the volume down button in the ipad 2 ,it was mute the device when hold it at once but before 2days i noticed that the device did not mute when i hold it ,why? and how i fix this by the way it is still volume down

hi i just wanna ask about the volume down button in the ipad 2 ,it was mute the device when hold it at once but before 2days i noticed that the device did not mute when i hold it ,why? and how i fix this by the way it is still volume down

Have you tried restarting or rebooting the iPad and then see if the volume control will work again?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When I try to use the Vision Acquisition vi, I get an error message saying that " The system did not receive a test packet from the camera."

Error -1074360271 occurred at IMAQdx Start Acquisition.vi
NI-IMAQdx: (Hex 0xBFF69031) The system did not receive a test packet from the camera. The packet size may be too large for the network configuration or a firewall may be enabled.

Bruce Ammons wrote:
Did you try disabling test packets? I know Basler cameras have a "Enable Test Packets" setting buried in Advanced Network settings or something like that. You have to change the setting in MAX to show all settings instead of just acquisition, then locate the setting. I have been told regularly that the setting must be turned off for Basler cameras to work properly. Perhaps your camera has the same setting and the same requirement.
Bruce
A very specific firmware revision for certain Basler cameras had an issue where the test packet would not be sent for certain packet sizes and certain specific conditions, causing a false report of a test packet failure when a normal acquisition would in fact succeed. However, this was fixed in later firmware revisions and I have never seen a similar issue on any other types of cameras.
Aside from this specific case, if a test packet fails, it generally means an acquisition will as well. Given that Pleora's software can acquire, we can rule out networking topology and hardware, assuming you are using the same packet size as the Pleora software is. The only other thing that would seem a likely candidate would be a software issue like a firewall or some other filter driver that is interefering with IMAQdx receiving the data.
Eric

Sometimes the people sending me a message receives a message that the message did not go through

Why are some of my contacts receiving an "alert" that their email to me did not go through?

Dear Hexonxonx, I have a green screen and it made the sound zipppp but the person that I sent it to did not get the message. Any thoughts? Thanks so much for your responce.

When i search a screen it is sensitive to capitilizations; how can i remove this so that the search is not cap sensitive?

for example if i search a screen for the word "Mobile", if it is capitalized in the document, and i type "mobile" i will not find it. i'd like to know how to remove the cap sensitive feature of firefox.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Best way to announce that the hardware does not meet the minimum requirements

     Hi Everybody!!!
     I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
to use does not meet the minumum requirements.
     In a nutshell:
* I just created a game using Direct3D / DirectX 11,
* I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
much died in my arms).
* According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
the customer detailing the Direct3D requirements."
* I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
     I don't have much knowledge about the current trends:
* I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
* I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
* I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
* Then again, displaying that message in a command prompt may not be the best idea either.
     Any help is greatly appreciated!!!
     Best Regards,
     Tarh Ik
Tarh ik

     Hi Chuck,
     I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
a museum). The crash started as a driver unload call, and after that everything goes down.
     I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
     What I finished doing was to create two sets of shaders (pixel and vertex):
* If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
* If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
that the computer did not match the hardware requirements.
      It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
      Best Regards,
      Tarh Ik
PS: This posting has been posted "AS IS"
Tarh ik

When i plug in the phone, all i see is the apple icon on a blck screen and when i take the charger out its showing that the phone has not been charged...

when i plug in the phone all i see is the apple icon on a blank screen. when i unplug it, it shows that the phone did not charge and is critical need of charging. what should i do?

well duh, let it charge. the apple logo means that its turning on

Email did not go through because the server did not reply?

When I try to email photos directly from Iphoto, it keeps saying that the email did not go through because the server did not reply, however the server is fine. Can anyone assist. This is a new issue, I was able to send photos a week ago.

I have the same problem with iPhoto 9.2.3 running OX 10.7.4 This is a recent problem and the server is fine, I can send mail from my primary email client (Outlook). I can share photos to face book but I can't share a photo from iPhota via email now. The message pops up immediately after I click the send button.
Jay

My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good. I can open on the web site but not from my mac computer

My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good. I can open on the web site but not from my mac computer.

Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
Do you have a link to that document?

How do i create a form in live cycle E4 that i can save as a PDF that the user cannot save over?

How do i create a form in live cycle E4 that i can save as a PDF that the user cannot save over?

You can't. If the file is made read-only via the file system, the user will prompted to save as a new file if they attempt to save.

I bought an Adobe writer program a few years ago, and have had no problem saving information I've added to pdf forms. For some reason, I can no longer save the information that I enter.on the form. In fact, I get a message that the information will NOT

I bought an Adobe writer program a few years ago,and have have had no problem saving information I've added to pdf forms. For some reason, I can no longer save the information that I've entered. In fact, I get a message that the information will NOT be saved. How can I correct this? Thanks!

Hey louiseg45826294,
Thank you for posting on Adobe forums.
Could you please let me know what Adobe Writer program you are talking about. Is it Adobe Acrobat or Reader?
Could you please share the screenshot of the exact error message that appears.
Are the PDF forms saved on your computer's local drive?
Hope to hear from you.
Regards,
Anubha

Service desk: Hide links (queries) in the work center view

Hi,
we are using the service desk towards our customers.
Basically we have to sets of roles: one for consultants (ourselves) and one for our customers.
Our customers are entering the service desk through a web-interface.
If the consultants enters the web-interface, they can see reports and queries to the left, and they can open and edit tickets.
If the customers enters the web-interface, they cannot see queries and reports in the left navigation bar, and they can not open and edit tickets.
Now we need a third possibility:
A customer need to open and edit tickets, but they should not be allowed to define (or even execute) queries.
Because when they can define queries, they get access to see all other customers tickets. And that is not good.
How to obtain this?
Thanks a lot in advance.
/ peter

Based on your comments, I take it that you may not implementing a formal first level support who can perform these tasks as recommended by solman standard. If you are, your customer can request reassignment using their reply option, and the support tech performs the task. You can implement some sort of email notification process to inform the new BP.
Alternatively, I can suggest two modifications if you have a developer at your disposal:
1) in your solution manager system, clone the incident create web dynpro to ensure population of the required fields to the customer and to suit your requirement. Here you can also remove the SU15 text id checks.
2) in your satellite system, modify the function group which triggers the create incident process and have it launch the cloned web dynpro above.
My apologies, I don't have access to a solman system immediately to give you the exact object names for the above suggestions.
Cheers,
P

How can I hide or make visible the fields at the order and at the delivery?

How can I hide or make visible the fields at the order and at the delivery?
Thanks in advance.

Hi,
For sales order, use user exit :
MV45AFZZ and FORM userexit_field_modification.
For deliveries, use BADI :
LE_SHP_DELIVERY_PROC (see with Tcode SE18) and method CHANGE_FIELD_ATTRIBUTES.
Create implementation in ref to this badi with Tcode SE19.
Regards,
Lionel

Can I "hide" form queries that the respondent did not answer?

Similar Messages

Maybe you are looking for