Can I install Sun Cluster on LDOM guest domain. Is Oracle RAC a supported c
Hello,
Can I install Sun Cluster on LDOM guest domains. Is Oracle RAC on LDOM guest domains of 2 physical servers a supported configuration from oracle?
Many thanks in advance
Ushas Symon
Hello,
The motive behind using LDOm Guest domains as RAC node is to have a better control of the resource allocation, since i will be having more than one guest domains which should perform different functions. The customer wants to have ORACLE RAC alone (without sun cluster).
I will have two T5120's and one 2540 shared storage.
My plan of configuration is to have
Control&IO Domain with 8VCPU, 6GB mem
one LDOM guest domain on each physical machine with 8 VCPU's, 8GB of memory, shared n/w and disks participating as RAC node's. (Don't know yet if i will use solaris cluster or not)
one guest domain on each physical machine with 12 VCPU's, 14GB of memory, shared n/w and disks participating as BEA weblogic cluster nodes (not on solaris cluster)
One guest domain on each physical machine with 4 VCPU's, 4GB of memory,shared n/w and disks participating as apache web cluster (on solaris cluster)
Now, My question is, is it a supported configuration to have guest domains as Oracle RAC participants for 11gR2 (either with or without solaris cluster).
If I need to configure RAC nodes on solaris cluster, is it possible to have two independent clusters on LDOM , one 2 node cluster for RAC and another 2 node cluster for apache web?
Kindly advise
Many thanks in advance
Ushas Symon
Similar Messages
-
Sun Fire V490 x 2 servers with Oracle RAC facing Split brain problem
Hi all,
I have Sun Fire V490 x 2 servers with Oracle RAC and they faced a Split brain problem. One of the node's database instance has gone down, The DBA claims it is due to network problem, but as such the networks are OK. We use the on board CE1 interface for Cluster interconnect and CE0 as the public interface.
Did anybody face this kind of a problem? Could this be a hardware/OS patch problem?
I had kept a continuous ping for 24 hours after this happened last time and the output shows no packet loss
Many thanks in advance.
Ushas SymonIn order to diagnose this properly, you'll need to provide too much detail and far too many log files for a generic discussion forum to handle.
Use your service contract and open a support case.
Because a cluster environment is involved you'll likely end up talking to the cluster support staff.
They can analyze hardware and software errors as well as review whether you configured the systems in a supportable fashion.
Be prepared to make a direct connection to each system and gather data using such as by using the Explorer tool. The technical support staff will tell you what they will actually need. -
Install SAP ERP 6.0 with Linux and Oracle RAC
Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
o You can use "Physical Standby".
o You cannot use "Logical Standby".
o You can use Data Guard Broker.
o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende -
Failed to install SUN cluster 3.1 8/05 on solaris 10(x64)
I install the cluster 3.1 u4 on two nodes(node1 and node2) by using "scinstall".( The two nodes have the same system) After cluster installed, i reboot node2 . Before rebooting, I have done the following operation.
# echo "etc/cluster/nodeid" >> /boot/solaris/filelist.ramdisk
# echo "etc/cluster/ccr/did_instances" >> /boot/solaris/filelist.ramdisk
# bootadm update-archive
updating /platform/i86pc/boot_archive...this may take a minute
# init 6
But node2 crashed,and failed to reboot.
I could only see several characters "GRUB" in the screen. The system even doesnot present the grub menu.
The system i used:
bash-3.00# prtdiag
System Configuration: Sun Microsystems Sun Fire X4200 Server
BIOS Configuration: American Megatrends Inc. 080010 08/10/2005
bash-3.00# uname -a
SunOS arcsunx42km0838 5.10 Generic_118855-19 i86pc i386 i86pc
Message was edited by:
skyqa
Message was edited by:
skyqaThe only thing I can find that is vaguely similar is where users have installed -19 of 118855 but not updated all the other patches on the system. I would try booting from the failsafe mode, if you can get to this. Then update all the patches.
If you can't I guess you are going to have to either boot from DVD and fix or just rebuild.
Tim
--- -
I can�t install Sun Studio 11 in Solaris 8
Hello!!
We are trying to install Sun Studio 11 on our Server.
The server is running under Solaris 8, we install J2SE 1.4.2_10 SDK prior to run the Sun Studio installer, but when we run the installer, it report the following error
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code
Some one has any idea?
Thank you in advance.
PD: Sorry for my English, I�am a beginner English student, please be pacient.i've installed java 1.5.0b06 and I can install SUN Studio 11 in Solaris 8
feedback:
==========================================================
# echo $PATH
/usr/j2se/jre1.5.0_06/bin:/usr/j2se/jre1.5.0_06:/usr/sbin:/usr/bin
# java -version
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
==========================================================
but when i try to install
==========================================================
# ./installer -nodisplay
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.fetchChildWizards(Compiled Code)
at com.sun.forte.install.tasks.AddChildWizardTask.perform(Compiled Code)
at com.sun.wizards.core.Sequence.perform(Compiled Code)
at com.sun.wizards.core.SequenceManager.run(Compiled Code)
at java.lang.Thread.run(Thread.java:472)
Could not find class during deserialization of the WizardState:java.lang.ClassNotFoundException: com.sun.install.products.Product
java.lang.ClassNotFoundException: com.sun.install.products.Product
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.ClassNotFoundException.<init>(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.util.Hashtable.readObject(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at java.io.ObjectInputStream.invokeObjectReader(Compiled Code)
at java.io.ObjectInputStream.inputObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at java.io.ObjectInputStream.readObject(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at com.sun.wizards.core.GenericWizardState.setWizardState(Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at java.lang.reflect.Method.invoke(Compiled Code)
at com.sun.wizards.core.ArchiveReader.callObjectMethod(Compiled Code)
at com.sun.wizards.core.ArchiveReader.<init>(Compiled Code)
at java.lang.reflect.Constructor.newInstance(Native Method)
at install.instantiateArchiveReader(ArchiveClassLoader.java:203)
at install.<init>(ArchiveClassLoader.java:143)
at install.main(Compiled Code)
===============================================================
so i am confused or maybe i have to install 1.4.2.10?? -
Installing sun cluster on system based on SUNWcrnet
Hi,
I'm planning to testdrive the sun cluster software. All our systems do run the SUNWcrnet install cluster plus additionally required packages. I read that for sun cluster 3.1 at least SUNWCuser is necessary. Did anybody succeed in running sun cluster software on a system based on SUNWcrnet? If yes which are the additionally needed packages?
Thanks,
markI wouldn't bother. You will need to install way too many packages. SUNWcrnet by default does not even give you the showrev command. I rather install everything and then disable what I don't need.
-
Configure Solaris cluster to failover guest domain when NICs were down
Hi,
I am running Solaris 11 as the control domains on 2 clustered nodes running on Solaris Cluster 4. There is a Solaris 10 guest domain which is managed via the Solaris cluster in failover mode.
2 virtual switches connected to 2 different network switches are presented to the guest domain. I would like to use link based IPMP to facilitate HA for the network connections. I understand that in this case the IPMP can only be configured within the guest domain. Now the question is how do I configure it in such a way that the guest domain fails over to the second cluster node (standby control domain) if both network interfaces are down? Thanks.
Edited by: user12925046 on Dec 25, 2012 9:48 PM
Edited by: user12925046 on Dec 25, 2012 9:49 PMThe Solaris Cluster 4.1 Installation and Concepts Guide are available at :-
http://docs.oracle.com/cd/E29086_01/index.html
Thanks. -
Can't install open office; youtube videos are green screen (audio ok); using call HP Tech Support fails (no reason given)
1) Can't turn McAfee Livesafe off, and think it's what's keeping me from installing Open Office. It downloads but can't install.
2) At work on wireless guest, youtube looks fine. At home on ethernet through DISH satellite, it's green screen. This is not he case with my older HP laptop connected to the same ethernet cable.
3) Why is HP tech support rejecting me, after I type everything in? If I ca't use it, don't make it an option!!!! The forums were choice #2, so here I am ... make me proud ...
Thanks everyone!!!!An alternative to OpenOffice would be KingsSoft Office, it performs better and still Free:
http://www.kingsoftstore.com/
McAfee products are problematic on some systems and suggest you uninstall it using their removal too then reboot:
http://service.mcafee.com/FAQDocument.aspx?id=TS101331
Build in Windows Defender should reactivate after the reinstall. As an antivirus product it is adequate as long as you practice safe surfing habits.
Windows key + X, select Command Prompt (Admin) and type: sfc /scannow
Let me know if it does not fix all or any corrupt system files.
Reboot and now try your Youtube.
I do not have an answer to what transpired between you and HP Support but only to say you should come here first.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Does sun Cluster 3.0/3.1 HA Oracle agent support to use Oracle spfile?
When defining the resource, the 'parameter_file' properties is usually sets to the Oracle pfile. Is it possible to use Oracle spfile?
It is said if leaving 'parameter_file' NULL, it will be default to Oracle default. Suppose leaving it NULL and with Oracle spfile created in default location, will it use the spfile?You did not specify which Sun Cluster version and Oracle version you are running.
Within SC 3.1 my understanding is that beginning with Oracle 9i it is possible to use the spfile.
If you leave the "parameter_file" property empty (NULL) then the default behaviour for 9i should work:
search under $ORACLE_HOME/dbs in the order:
1. spfile$(ORACLE_SID}.ora
2. spfile.ora
3. init${ORACLE_SID}.ora
Greets
Thorsten -
Can't install Final Cut Studio 2 because "PowerPC applications are no longer supported"
Bought a brand new 15" MacBookPro OS X 10.7 2.2Ghz Intel Core i7 and tried to install Final Cut Studio 2. Got the error message "You can't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported." Oh no, does this mean I have to spend more money!???
I'd like to provide an update on this situation in case anyone is in the same boat I am.
I went to the Apple store today. I asked if I could downgrade my operating system. They said no, since it came pre-installed with Lion. I asked if Final Cut Studio 3 was compatible with Lion. They said yes, for the most part. They said there was an issue exporting video in 1080p.
Of course, conveniently Apple is no longer selling FCS3 and the ones on Ebay I saw have gone up to more than $650 a copy. I am out $400 for stupidly buying FCS2 a few months ago, which is now useless to me. I told the Apple guy that I'm not buying FCS X until they work out all the kinks. This leaves me with this laptop that I bought for video editing with no editing software to use.
I never thought I'd say this, but I'm actually considering getting Premiere Pro now for Apple, which is supported in Lion and is running a deal for 50% off. (http://www.adobe.com/products/creativesuite/faq.html#lion-os) If Apple doesn't start selling FCS 3 again, they are really not giving me any choice but to switch! -
Sun Cluster & 6130/6140 thru switch with cross-connections not supported?
Hi:
I noticed that the 6140 does not support cross-connecting the 2 controllers to 2 switches for higher availability when using Sun Cluster:
http://docs.sun.com/source/819-7497-10/chapter3.html
Does anyone know why this restriction is there?
Thanks!Since there was no real answer to the question in this forum, I cross posted this issue to the cluster forum.
See http://forum.java.sun.com/thread.jspa?threadID=5261282&tstart=0 for the full thread.
Basically, the restriction against cross-connections is no longer valid and the documentation should be updated to remove the note.
This is all a good thing, because I had my 6140's wired into my sun cluster environment via the 'cross-connections' method diagramed in figure 3-4. :-) -
LDOM Guest domains show c0d0 as 100% using iostat -cxn
I have a T5220 split into one primary and 3 guest domains. When the primary is re-booted an iostat -cxn on the guest domains shows c0d0 as 100% in the %b column. This is causing BMC Patrol to report a problem.
Searches of sunsolve and google have not given any pointers - possibly due to the vagueness of the question.
This situation only seems to occur when the primary domain is re-booted without the guest ldoms being re-booted.
Any help would be much appreciated.
Greg HitchcockI'm not at liberty to give you a specific timeline but have a look at this http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=2191993
-
I can't install Sun Java System Application Server!! Who can help me??
I download Sun Java System Application Server(sjsas_pe-9_0_01-p01-windows.exe),and the first time of my installation, it was blocked after it was istalled 14%, half an hour later I canceled the installation and wanted to re-install it, and I tried many times,but every time after I choose the "Installation Directory" and cliced the "Next" button it would be blocded, all of the bttons was disabled except "Choose directory" and "X"(close) buttons.
OS: Win2000 Service Pack 4
Thanks in advanceYeah, I had the same problem!
And The Wiki helped me http://wiki.java.net/bin/view/Projects/WinHang
Even my Firewall had the function "Disabled Mode", I needed to fully stop all the services of Antivirus and Firewall. After that i deleted the "productregistr*" file and ran installation from the console.
And it was the only right way to install!
Now enjoying =) -
Can we monitor Sun Cluster events
Hi,
Whenever there are some events, issues in cluster, we see logs on the node consoles regarding the same. Is there any way to capture these
events through some other application? Better, is there any way by which we can send these events, in some standard format (protocol way) to some application that can send emails etc to administrators so that one need not keep eye continuously on the console for issus in cluster?Well, I did not get a chance to experiment with CRNP, however, came up with a strategy that can be used.
First of all, we can do this with Solaris 9 and above as we do not have a resource type SUNW.Event available with Solaris 8. This resource type needs to be registered with only one resource group on the cluster, the resource group can be related to your data service.
So, one should first get the file SUNW.Event from the cluster source, copy it at /usr/cluster/lib/rgm/rtreg, also, copy corresponding RT_BASEDIR contents mentioned in this file at appropriate location. This directory contains start, stop, check and monitor scripts.
One can set the required properties SUNW.Event.
All this needs to be done on all the nodes.
The properties of this resource type cover the port and logical address (which is usually the cluster address) where the events would be sent. One can then write a client to listen to this port and process the events.
Hope this clarifies the point, please confirm if you see any issues with this. -
Can't install Sun One Application Server 7 (Win XP)
When I run the setup.exe it shows me the following message at the windows console:
launching installer....Error writing native components to disk. Aborting wizard
Thanks. :)Since I am working on troubleshooting of this problem, I would very much appreciate if you could check something on the machine where you encountered this problem. Do you, by any chance, have a file called Documents on your home drive (most likely c:\documents)?
If so, and if you temporarily rename this file, does the problem go away?
Thank you in advance.
Maybe you are looking for
-
"entry in field bank account number is longer than 10 characters"
Hello Sap Experts, The user is getting an error on saving the bank infotype. (0009). The user is trying to create a IT0009 for an international assignee.The error is "entry in field bank account number is longer than 10 characters. The default charac
-
Hiii i am tryin to bring in stock (for a packaging material ) through MB1c ...its giving me the foll error "NO STOCK POSTING POSSIBLE FOR THIS MATERIAL" please help me figure out the error Regards maddy
-
Trying to figure out how to put music below like a DJ
I've been trying to figure this out but can't seem to find anything. Here's what I'm trying to do... I have a spoken voice track. Below that, I want to add a music track that follows at X decibels below the voice - but when the voice pauses the music
-
I have Final cut Express 4, can I update to Final cut pro if I pay, to make the update.
-
5.1 sound with Digital I/O Module + Vista + X
Hello, I tried searching the forum and even browsed through 6 pages looking for a solution but I am stumped. I have an X-Fi XtremeGamer with the 002 drivers installed in Vista x32. I bought the Digital I/O Module from Creative and have the optical ca