Can I make/render 4K resolution videos on Premiere Pro CC?

Now, on Youtube, you can upload +1080p videos.
A Youtube video can display these resolutions (if it's avaliable):
144p.
240p.
360p.
480p.
720p.
1080p.
1440p.
Original.
The "Original" is used when the video is avaliable at a resolution higher than 1440p, so you can upload 2K videos, 4K videos...
Because of this fact, I want to upload my videos @4K; and I don't know if I can using Premiere Pro CC.

Well, it depends on your media. Create your sequence from your video clips. edit, and then export to H.264 at a high bit rate of around 30Mb/s perhaps. It really depends on the footage. However, if you are using stills, then just set up a 3840X2160 sequence. I used a Red preset and changed the frame size.
Like this:
To export, something like this:

Similar Messages

How can I make ShadowPlay footage play nice in Premiere Pro CS6?

nVidia recently released the beta for their new capture technology, "ShadowPlay" which makes it a lot easier for youtubers like me to capture footage of PC games. However, Premiere Pro CS6 fails to handle the audio well, throwing it way out of sync. This apparantly happens because Premiere doesn't support variable framerates especially well. I have no interest in editing in Vegas Pro, but i'd be happy to take the extra time to make the file work well in Premiere. I'm not highly knowledgable though so I'm not sure what, if any, the process would be to do this, so I'd greatly appreciate any help!

>figure a VIDEO EDITING SOFTWARE'S forums would know more about editing video
Yes... and everything I know (plus Steven in #2) is that PProCS6 does not do well with variable frame rate video... and is not likely to ever be updated to add that capability
Which is why I suggested contacting nVidia... since the file format is from them, not from Adobe
I don't/won't use PProCC so have NO idea if it works better with your type of file
I think you can try PProCC free for 30 days, so you can find out for yourself... check in the Cloud forum to find out about 30 day trials
Cloud Forum http://forums.adobe.com/community/creative_cloud

Can't import audio or export video from Premiere Pro

because nobody can solve the problem if I call by phone are busy, if chatting not know resolve, if I send email no answer, this version of Premier is the worst of all, since they did Membership is pure waste time with your program ... I work my projects and then when I want to export do not leave me, if re start the pc asks me to put my membership, then we are not the files and when put to find them and not be imported or imported without audio ... because if they are good for cobar each month's installment, do not fix this problem because it makes me lose time and dinero..y the strangest part is that everyone with the pirate Premier not have this problem.
Message was edited by: Kevin Monahan
Reason: I realize you're frustrated, but try to create a title that is more descriptive of your problem next time. Thanks!

import from SD Card ...insert the SD slot on the PC.....
I put them on an external drive as protection and another file in the pc and except the two projects, when Premiere me not recognize the files try to bring them to the external disk, some occasions works, another only brings the video without audio and most of the occasions not recognize any file, so it's double work and perdidad time, and technicians Premiere in an occasion made a partition the hard disk of the PC for it to work, but only work well for a few days, as the machine will re start the same thing happens again ... now the premier technical atman only to tell me that specialized agents atenderan me, but it never happened, because I hang chat .... and tel is the same .. .but when charging if they are very punctual, I pay them for service suite.asi that they no longer do and made the comment pirates users because it's true ... they do not struggle with their cracks, I am Premier User pirate ever paying for more than 10 years ago, but since started membership, this has been an ongoing problem.

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

If you make a call then tap the Facetime button to connect Facetime, the duration of call up to Facetime connection will be charged under your regular airtime. However, duration during facetime conversation will not consume airtime.
But if you tap the Facetime button on the Contact Page, then the whole duration will not consume airtime.
For Facetime to work, both parties must be connected to wifi.

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

Can anyone tell me if i can make a virtual car accident in premiere pro cc

Can anyone tell me if I can make a virtual car accident, in premiere pro cc

You could do the reverse trick.. Start with two cars directed at each other and back up quickly. Then reverse the footage to make it look like they are coming at each other. Add some effects in After Effects and you could probably make a believable scene.
Here's a short I made back in school that uses this - The Camera on Vimeo It's towards the end. I'm not sure if this is what you are looking for but that's one approach.
-Tim

Can I make a disk image of my macbook pro for backup?

Can I make a disk image of my macbook pro for backup? I'm using Lion, have 8 g memory and 500 HDD.

Clone Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Select Disk Utility from the main menu then press the Continue button.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
DU will also clone the Recovery HD partition automatically at the end of the process.

"Missing Codec" when importing QuickTime-Video into Premiere Pro CS5.5. What can I do?

Dear Adobe Community,
I tried importing a QuickTime-Video into Premiere Pro CS5.5, which did not work because there was a codec missing. What can I do now?
Thank you in advance for your helpful comments!
lots of love
Flora

Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

When exporting video from Premiere Pro?

When exporting a video from Premiere Pro it makes a .m4v file instead of .mp4, even though it saids in the Premiere Pro that it will make a mp4 file - and I can't use them afterwards. It has been there after I have updated last time.

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Problem Playing Video in Premiere Pro CS4

I am having a problem playing video in premiere pro. When I input any movie clip and try to play it in both the timeline and in the preview mode, the audio works fine but the video only plays a few seconds worth of footage at a really slow pace so that it takes up the entire time. For instance if I load a 3 minute video, the sound is normal but over the coarse of that 3 minutes I will only see a small number of the frames and they are cycled through in ultra slow motion.
All the clips play normally outside of premiere. I have uninstalled and reinstalled the program. I have premiere installed on my laptop and it works fine. I have tried rendering the video first and it still doesn't work. I have tried holding shift before the program is loading and it did nothing. I have downloaded all the updates too. Videos seem to play fine in After Effects.
Also, I am having trouble when importing HD video into premiere and after effects. For some reason the programs freeze when I try to import footage from my Creative Vado HD pocket video camera.
Here are my computer specs
Windows Vista Ultimate 32 Bit
Intel Core2 Quad q8200
ATI Radeon 4670 Graphics Card
Gigabyte Motherboard
4GB of 800 Mhz RAM
This is really frustrating. Any help would be greatly appreciated

Keith,
The file extension .AVI indicate a "wrapper." All sorts of stuff can be in that wrapper *. Some of that stuff will play/edit fine. Much will not and create issues, as you have seen. Your camera uses a CODEC to create those .AVI files. That CODEC is the issue. I recommend G-Spot to find out what the CODEC is. Some times it's just a matter of having the proper CODEC installed on the computer. Most of the time, it takes much more than that - hence Eddie's links on "conversion." At least G-Spot will get us all on the same playing field, and explicit help can follow - probably to study Eddie's links. My guess is that your camera uses some form of DivX CODEC, hence the problem that you see.
Good luck,
Hunt
* Think of .AVI like the foil wrapper on a stick of gum, when you remove the outer lable. You know it's gum, but not what flavor. Could be Juicyfruit, or Spearmint, or Double-mint. G-Spot will tell you the flavor. PrPro likes some flavors, but hates others.

Error message when adding video to premiere pro, please help!

Hi there,
Every time I try and add a video to premiere pro I get an error message "There was an error decompressing audio or video." I made the video in After effects and it plays just fine but I wanted to add sound to it in premiere pro. The file is mpeg movie, I can get more info if needed, just let me know. I am not very experienced at all in adobe but i'm learning so if someone could please help, that'd be awesome? P.S i'm using a MAC

You're welcome.
I've never visited Paris but it is on my list.
I don't believe the 10.4.4 Update had anything to do with this. I also have a .Mac account and I didn't experience any problems sending with any of my accounts and different SMTP servers after installing the Update.
Something to try.
Go to the SMTP server settings for the .Mac SMTP server and in the Server Port field, enter 587 in place of 25 and when finished, select OK to save the changed setting.
Test if this resolves the problem.
Having the SSL warning message is odd if Use SSL is not selected for the SMTP server and if using 587 as the server port doesn't resolve the problem, this may be a Mail.app preference file problem which is the file that stores all account settings.

I'm having this message when I try to export my video from Premiere Pro: "Error compiling movie. Unknown error"

I'm having this message when i try to export my video from Premiere Pro:
"Error compiling movie. Unknown error" Do anybody knows what to do?

1st, I moved your message to the correct forum
2nd, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
3rd, Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

Can't seem to find free trial of premiere pro after downloading on PC

can't seem to find free trial of premiere pro after downloading on PC

It's under Start > All Programs > Adobe Premiere Pro CC at first. After first launch, windows will remeber it as a recent program and it will be easier to see.
As for why it's not responding... try all the obvious stuff, like force quit/restart/relaunch. Then check your specs and make sure they meet the requirements. After that, it may require some troubleshooting with tech support to find out why things did not install correctly for you.
And, to be clear, installing the tirial is essentially the same as installing the full retail version. The main difference is that you will ge tthat trial dialog each time you launch and it will time out after 30 days if you don't activate by then.

Resolution issues in Premiere Pro

Hi, I am attempting to import a video into Premiere Pro for editing but am having some weird issues.
I have a video which is 1920x800 and have created a Premiere project with the resolution set to 1920x800 and yet I have black bars on the left and right of the video as shown below.
If the project and video are the exact same resolution, how is this happening?
Thanks.

I've never heard of 1920x800 video... it's probably 1920x1080.
Try this:
Then check this:
How do I choose the right sequence settings?

How to define the default thumbnail, appearing after exporting a video in Premiere Pro?

Hi community,
When I export a video in Premiere Pro, the default thumbnail (appearing in windows file explorer for example) is never the best.
At my job, I need to create a lot of video that I publish through a CMS. Every time, i need to reset the preview thumbnail of the video because the default one is not accurate.
How to define which frame of my video will be used as a preview thumbnail after the video is exported?

This is not something you can control with PP.

Can I make/render 4K resolution videos on Premiere Pro CC?

Similar Messages

Maybe you are looking for