Can I Move the Anchor Point for Adjustment Brush in ACR CS5

It's never been a problem before, but the anchor point for the Adjustment Brush in ACR is sitting exactly where I need to see what is happening.  I can delete and start again, but if there is way to move or hide the anchor point while stil being able to adjust the setting, it would be handy to know for next time it happens.

R_Kelly wrote:
You can press the V key to toggle the pins on/off.
Exacty what I was after.  Thanks.

Similar Messages

  • How can I move the Anchor points of multiple layers to the same position within comp?

    I have a comp of a butterfly that I want to copy the keyframes to many other butterfly comps, but to get the animation to work, I need all the anchorpoints of the individual layers to be at the exact same location within the comp (So the left wing, right wing, and body anchor points are right on top of each other)
    How can I accomplish this quickly? I have a lt of comps to do...
    Thanks all!

    I would have set this up in Illustrator Before you started. Start with a rectangle that has either fill or stroke on a layer but the opacity is set to 0. The center of the rectangle will be the anchor point for that layer when you import as a comp maintaining layer size. Now create your left left side contents on the left side of the rectangle and repeat for the right side. Import as a comp and you'll be golden.
    Here is a sample file and what the file looks like imported as a comp. Notice the x values of all anchor points are identical.
    The artwork isn't great, it was created in less than a minute but it porves the workflow.

  • Is it possible to move the anchor point for an inline object?

    I have noticed that sometimes the anchor point will get inserted in the middle of a word resulting in the spellchecker marking the word as misspelled.
    I can't seem to find any information in the documentation about moving an anchor point. Is it not possible?
    Thanks

    Krisler,
    Select your Inline graphic. Then click on the center of the graphic and drag the mouse's pointer into the text. When you get your pointer into the text you will see the insertion cursor (vertical bar) just at the tip of the mouse arrow. When you let go of the mouse button the insertion point for the graphic will be where the insertion bar was at that time. The key point is to concentrate on the position of your arrow tip as you attempt to reposition the insertion point.
    Jerry

  • How do I dial in the anchor point for 3D rotation?

    Flash knows where the anchor point is in 3D space in order for the symbol to rotate around it, but I can't seem to figure out how to see the coordinates of the anchor point or type in new ones. Please tell me how to do this. I am already very annoyed that Lynda, a pay service, doesn't think this is vital information. Apparently they think we would never want to do anything more visually stimulating than one simple spinning logo! But I digress...
    Just to be clear, I know how to move the anchor point visually on the stage, but I want accuracy. I want to be able to give two symbols the exact same coordinates to rotate around.
    Thanks for your help.

    Thank you! That's exactly what I was looking for.
    I also found a work around to what I was trying to do. You can select multiple symbols and rotate them around one axis, but that's not as accurate. BTW if you have any links to using 3D in CS4 that are beyond basic, I would love to see them.
    Thanks again,
    -Red-Mike

  • How can I reset the anchor point to its default?

    One of the other guy using my machine screwed up the default anchor point position for text layers & for the life of us, we can't figure out how to reset it back to its default (centered on the text layer).
    Right now, it appears a the bottom of the text layer (bottom left if left justified, bottom right if the text is right justified & bottom center if cerer justified).
    Just to be clear, when typing out a brand new text layer, the anchor point does not appear in the center of the layer, as it normally does. Hitting "reset" in the tranform controls always moves the AP back to this position (ie, if I use the pan-behind tool to put the AP where it needs to be, then hit "reset", the AP moves back to the lower left corner of the layer)
    I'm sure it's got to be some keystroke combination of some kind...
    Anyway, does anyone know how to set it back to its default? It's a pretty big pain to have to manually set the anchor point for every text layer, and I kinda want to leave the "delete-your-prefs" option as a last resort...
    thanks
    D

    As Rick said - there is no way in hell the text ever could have been perfectly centered to begin with. the behavior you are seeing is perfectly normal. Whenever you change the text, the anchor point will respond in kind. Only fixed size text blocks will reverse that principle and fit the content to the bounding box, leaving the anchor point unchanged.
    Mylenium

  • Can't see the anchor point or bezier handles when editing an effect

    Please help! This may be an easy fix, but when editing an effect I can no longer see the anchor point, keyframes, or bezier handles on the timeline image. Specifically, I am keyframing the Brush Position in the Write-on effect, and while I can move the brush position, there is no visual cross-hair on the image nor bezier handles to adjust the curve... every adjustment is therefore a guess as to where the adjustment handle is.
    Is there a button that toggles anchor point and keyframe path display? Obviously, not being able to see what you're working on is very frustrating. I tried to click the icon to the left of the Write-on effect bar (4-point square with the selection tool in the upper right), but nothing happens. The write-on effect bar is selected and the Brush Position is in keyframe mode.
    Thank you in advance for your help.

    I worked with this the other day. Bezier handles and the hot spots are tough to see and the write-on effect is a bit wierd for me. You may have more success placing keyframes at beginning and end of a clip as I had trouble keyframing only part of a clip and still controlling the writing effect. You can then slide the keyframes later to change the duration.
    Also, you may want to disable all the other effects while editing this one, as the others keep getting selected instead for me and I end up e.g. moving the image instead of the brush.

  • Can I change the center point for a motion scale

    I would like to motion scale an image with the center for the scaling at the bottom of the image, not the center of the image. I tried changing the anchor point numbers, but that moves the photo as well.

    Try setting the Anchor Point - NOT the Center Point. The Ccenter Point is where the center of the image will be; the Anchor Point is the point at which the image is anchored.
    -DH
    Message was edited by: David Harbsmeier

  • Can you change the anchor point of a swf in CP5.5?

    I have created a small swf in Flash and have published it.
    I've imported the swf into CP5.5 and applied an effect of anti clockwise rotate and assymetric zoom out in an effort to get it to spiral backwards into oblivion.
    However, it seems to rotate the swf from the top left corner.
    Is there a way to change this anchor point to the centre of the swf?
    Regards

    Col,
    The anchor point of an object in Captivate is always the top left corner of the bounding box. No way to change it (have been pleading for that since long). Only exceptions are Rotate and motion effects, where the center is used.
    Lilybiri

  • Can i move the magnet point?

    I am editing in FCP X at the moment. I feel that i have learned most of it and i can edit without to much hazzle.
    I am wondering one thing. If I'm editing in the main storyline and say I'm adding a music track. It will attach to the main storyline with a point at it's start. What do i call that point? Magnet point or anchor point? Anyhow, can i move that point? Can i make it attach to another clip without moving the track in time.
    I hope you understand my question.
    Thanks
    /Tomas

    Thank you so much!
    That made my day!

  • Wrong Mouse Pointer for Adjustment Brush with Image on External Drive

    Adjustment brush guide "circles" is not visible when hovering over the image. It is only visible when you are to the side of the image in the gray space. This only happens when I am using Lightroom from my external drive. It does not happen from the local copy.

    After some research, the brush preset I created happened to have the same settings as "skin smooth +" in Lightroom, which is the one it kept switching to.  Perhaps that was the problem...

  • How to Change the Location of the Anchor Point

    Hi
    Very new to affter effects.... i was wondering if you guys could please tell me how to move the blue anchor for animation of text please.

    If you just want to move the anchor point on your text layer you can do it by hand instead of going in and manually adjusting it from the transform menu as Dave suggested. 
    However, by what you've written it seems like there may be some confusion about what moving the anchor point actually accomplishes.  So just to clarify, the anchor point, or the small crosshair icon usually in the middle or corner of the layer, is actually a customizable location that essentially dictates the center around which the position, scale and/or rotation values will change when your layer is animated over time with keyframes.
    For example, if you would like to move the anchor point so that your text rotates around a point near the corner of the layer, you can press the Y key to activate the Pan Behind Tool and move the anchor point to the corner.  If you have CS6 you can hold down the Command Key to lock the anchor point to the center, corner or edge of your layer.  A little square will appear around the Anchor Point when it's ready to lock.
    If you've keyframed some of the properties on a layer and would like to temporarily see how your layer looks without messing up any animation you've done on it, simply duplicate the layer by selecting it in the Comp's layer panel and going to Edit - Copy and Edit - Paste.  That way you can do whatever you'd like on the duplicated layer wihout harming your original  Then do one or more of the following:
    A.) You can reset all of the trnsform properties of the layer by clicking Reset.  This will set your layer back to it's default transform settings.
    B.) Or, you can delete all of the keyframes on an individual property by clicking the stopwatch again.
    C.) Also, clicking the light yellow diamond next to the Source Name will delete a single keyframe and the arrows on either side will move the playhead from keyframe to keyframe.  You can of course always delete keyframes manually by selecting them in the timeline and hitting delete.  Holding Shift will snap the playhead to each keyframe.
    I hope this helps and if you're still having trouble I highly reccomend you start here to learn After Effects or go here for additional information.

  • Anchor point for cursor seems off

    It's like the anchor point for the cursor is way off. I can click paint brush, and the paint will show up halfway across the page. If I keep clicking, the painted spot will finally show up under the cursor and I draw. If I move the cursor, and start again, same problem. If I enter text, the text willl appear so far below the picture, I have to zoom out so far, the the picture is a very small square. I grab the text box and move it back up to the picture, zoom back in and finish. If there is more text, I just duplcate the layer, so I don't have to go through the drill again. Example:
    IMG]http://imageshack.us/a/img801/4439/photoshopbrushprob.jpg[/IMG]
    [IMG]http://imageshack.us/a/img825/7656/texterror1.jpg[/IMG]
    Same problem with drawing a line. I click on the start point, and the line draws itself, off page to the left
    [IMG]http://imageshack.us/a/img820/1223/photoshoplineprob.jpg[/IMG]
    My video drivers are up to date, I'm working in Win 7 and CS5

    As for the text: You have a baseline shift of -1000 set and all your otehr values are whacky as well. Reset the type panel. The rest is impossible to make sense of. You need to provide exact system info. could be an issue with your mouse/ tablet driver, could be something else.
    Mylenium

  • FAQ: Why isn't the anchor point centered in shape layers?

    [UPDATE: In After Effects CC (12.1) and later, you can center the anchor point within the visible content of a layer. ]
    Short answer
    Because in shape layers you can have two distinct kinds of anchor points - the anchor point in the main transform properties, as in any other layer type, and also an anchor point in the specific transform properties for each shape. When you create shapes by dragging with the shape tools, it's the anchor point for the shape group that will be centered. If you want to animate the whole layer from the main transform properties, you may need to shift the anchor point so it matches the visual center of your content.
    Long answer
    Shape layers are a unique type of content in After Effects.
    In fact, they introduce a bit of the object/group hierarchy model in Adobe Illustrator, rather than follow the typical layer model in After Effects.
    In other words, while you can definitely use them to quickly create a vector shape and then animate that shape as any other layer in After Effects, you also get the ability to create, edit and animate multiple shapes (each with its' own set of visual appearances) nested in a single shape layer.
    This allows all kinds of cool animation opportunities, but it also means that a shape layer is not your typical After Effects layer.
    So, when you create a shape by dragging with the shape tool, there actually is an anchor point that is perfectly centered - that's the anchor point in the transform property group for that shape group. If you double click a shape, you'll see a bounding box. This a visual representation of the transform properties for the shape group, and the anchor point specific to this group will default to the middle of that bounding box.
    However,  the main anchor point for the whole shape layer may not be centered relative to the shape content. This is normal behavior - Note that if After Effects tried to center the layer anchor point relative to the first shape group you create, it would be immediately wrong when you add more shape groups to the layer. Or when you animate shape groups around.
    Now, as many other things in After Effects, shape layers are designed to let you go as deep as you want. Ideally, you may want to try animating the transform properties for each shape group, since there's when things get really powerful. However, if you want to consider shape layers as a one shape per layer entity and animate in that way, you can of course do that. Bear in mind that you may need to center the anchor point yourself relative to the visual center of the content. If you don't do this, the shape layer's content will be offset from motion paths, or behave in a different way from what you may expect when animating scale or rotation.
    To do this, make sure you're not selecting a nested shape group but the shape layer itself, then you can do the following:
    Use the Pan Behind tool as with any other layer (this may not give what you want if you do it after creating a motion path, since it will modify position values).
    Drag the hot text for the Anchor Point property in the Timeline panel, as if it was a slider. You can then re-thread the content relative to the motion path. You can also achieve this by Option- (Mac OS) or Alt- (Windows) dragging with the Pan Behind tool.
    For more information on shape layers, see Drawing, painting and paths in After Effects Help.

    THANK YOU SO MUCH :-)
    I didn't knew this shortcut as I didn't have to use it anyway.
    but it's weird because all the other tools like even the circular gradient tool have their point visible.
    Anyway, I guess you can press H with any tools.
    Again, thank you, I should have ask it before. ;-)

  • Cs6 , how can i add a anchor point in the curve in the channel Red or Green?

    Hi
    how can i add an anchor point in the curve in the Channel R / G and B?
    in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
    and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green  and 1 in the channel blue
    i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
    i can do it with ctrl+m and call the curve
    but i can't do it with curve adjustament tool
    is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
    thanks

    thanks that's correct! thanks
    but it's not 100% correct
    to add a multiple points in rgb shift+click doesn't work!
    from adobe
    Keyboard shortcuts: Curves
    You can use these keyboard shortcuts for Curves:
    To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
    To select multiple points, Shift-click points on the curve. Selected points are filled with black.
    To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
    To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
    To move selected points on the curve, press the arrow keys.
    (Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image. 
    If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool .

  • Can't manipulate single anchor point - only move entire path

    Neither using the direct selection tool nor holding command (I'm on OS X) while using the pen tool will allow me to move individual achor points, I am only able to move the entire path.
    I can add and delete anchor points, but I am only able to control the handles on newly formed anchors, holding the space bar does not allow me to move new points either.
    Is there a setting somehwere that I'm missing that will allow direct selection to work properly?
    Thanks

    Problem Solved.
    Turned on Smart Guides (cmd-U) and that seems to have taken care of it.

Maybe you are looking for