Can I open PSD Video files in premiere elements 12?

I have Photoshop CS6 and would like to purchase a video editing software. My question is if I purchase Premiere Elements 12, will I be able to open PSD video files from photoshop in the Premiere Elements?

Ps CS 6 (and the Extended version back to CS 4) can edit Video (limited Import capabilities, and limited Export capabilities). However, Ps will NOT Export any Video as a PSD. The PSD format is the Ps native Image format, and is output via Save.
My *assumption* was that the PSD was a Still Image, that was perhaps going to be animated in Video via Keyframing the Fixed Effects, such as Motion>Position, over time, as there is no PSD Video. Perhaps my assumption was incorrect, as to what the OP has, and wishes.
In Ps CS 6, Video output will be to a standard Video format/CODEC, but the list of available formats/CODEC's is very limited, compared to Premiere.
Maybe I am just misunderstanding what the OP is looking to do?
Hunt

Similar Messages

Opening psd video files in premiere elements

I have Photoshop CS6 and would like to purchase a video editing software. My question is if I purchase Premiere Elements 12, will I be able to open PSD video files from photoshop in the Premiere Elements?

Yes. PrE can Import a PSD, so long as it's RGB and 8-bit Color Mode.
Now, if it is Layered, it will be Flattened upon Import. PrPro can Import a Layered PSD as a Sequence (something that PrE does not have), and maintain those separate Layers.
The workaround, if you do wish to retain Layers (well, sort of), is to Save each Layer as a separate PSD from Ps, then Import those resultant PSD files, stacking them on successively higher Video Tracks, one above the other.
Good luck, and hope that this helps.
Hunt
PS - I had Moved your post from the Ps General Discussions Forum, before seeing this one. I will Lock that other post, when it shows up, so that if you have any questions, we can continue in this thread - the Adobe Forums are acting up a bit today, and some posts have been very slow to migrate.

How can i open a .prel file in premiere elements 11?

Hello Community
Yesterday i created a clip with premiere elements 11 and i saved it as .prel file.
Today i wanted to open this file to go on working on my clip but i couldn't open the .prel file.
When i try to open this file, my premiere elements 11 says that it doesn't support this kind of file or it's in a wrong codec.
Maybe it is because I relocated the different clips i used for my video after i saved my project
Can anyone help me out?

nikank
Maybe it is because I relocated the different clips i used for my video after i saved my project
A very likely possibility that should be explored first. Please move the clips to exactly where they were when you
imported them into the project. When you import your source media into a project, all you get in the project are copies of the
originals. And, those copies need to trace back to the originals at the hard drive save location where
they were when first imported into the project.
Under the condition that you describe, even if the project did open, you should be greeted by several "Where is the file_____?" messages
that you would have to deal for the reconnects.
Other complications may be involved but let us start with the obvious one.
Looking forward to your follow up.
Thank you.
ATR

DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?

DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?

Indicas que no puedes abrir ningun archivo de video, se supone que has probado varios formatos, mp4, mov,..
Has actualizado el OSX a 10.9 ?, funcionaba antes? La versión de Photoshop es la CC, no la CC 2014?
En el menú de Ayuda>Actualizaciones, cual es el resultado, dice que esta al día?
Tienes abiertas otras aplicaciones?
Prueba a cerrar todo, espera media minuto y abre Photoshop a ver que ocurre.
(Estas utilizando un MacBook Pro?)

Can't open any video file both by real player and ...

From just a few days i can't open any video file by real player.Then i tried to open it from video centre.Same problem.I onLy hear the sound.Even i can't open that 3gp file which was played good by both real player and v'd centre before the problem started.Please help.

Please mention your device model.
In Love With My C6-01:Now running on Nokia Belle!

Can't add a .ts file to Premiere Elements 12

Hi all,
it's me again. I tried to add a .ts file to Premiere Elements 12, but the program crashes every time. My system is a Macbook Pro OS X 10.9, 2.5 GHz, 8 GB RAM.
This is what Mediainfo says about the file:
I thought it's because of the file size. The original file is 8 GB (I recorded it with a sat-receiver). So I used the cutter to make it smaller but Premiere still crashes.
I tried another thing and used a video converter program, exported the same file also as a .ts file, and this one I can add to Prmiere without any problems. I just don't want to do this with every file because it takes the whole night to convert one single file :O
Any help is greatly appreciated, thank you in advance.
Jessie

ATR,
thanks for answering. You're right, the .ts format is not listed as import format, but I read about it in a few forums as I searched for a program according to my requirements and that is not too expensive.
However, last night I tried a lot and I read a lot about the codecs because I assumed my problem has to do something with the audio layers. I created two test files, and I was able to import one file, but not the other. The audio layer was the only difference between these two files. So I installed the missing AC3- and A52-codec and it worked so far. Though I have to say that I don't really know if that was the issue as I found out it takes quite a time for Premiere to import these large .ts files. I always thought the program crashed, you know, a spinning mouse pointer, no reactions at all, the small window with the import progress stayed at 0 % the whole time, and when I right-clicked on the icon in the dock it said "Program is not responding".
I also found out that I can transcode the .ts files with VLC player (much faster than the other program I used before) and reduce the audio bitrate, and Premiere works much faster with the new transcoded file.
So I think I can live with this workaround
Thanks again,
Jessie

Can't open my video files from my camera/SD card with sound into premiere pro or any software. HELP!

I am on an OS X 10.7.5 and whenever I pug in either my Panasonic HC-V720 or the SD card I can't seem to find the private video file, I get folders like the picture bellow instead.
I have tried in a different computer running a newer version of OS X and the private file appears instead. I can't seem to get my videos up on premiere pro CS6 with the sound I only get the image/video by importing the .mts files.
Does anyone know what to do?

YYou should be asking these questions on the Adobe forums.

Can't import .mxf video files in Premiere CS5

Hi all!
I've just installed Premiere CS5 and imported some .mxf files to a project. But premiere just recognizes the audio tracks, it don't recognizes the video one.. it's like it was a simple audio file.. and i can see the video outside premiere.. anyone knows why is this happening?
With cs4 i never had this problem.
Thanks in advance!
André Inácio

Assuming you're not using the trial version :
if you can't import XDCAM EX files using the Media Browser, which will only import what Premiere needs, then there is something wrong with your installation.
PPro CS5.02 woks with all flavors of XDCAM EX files including those from the 350/320 cameras.

Can't open any video files anymore

Had no issues and then suddenly any video file that I bring in won't show up but instead I get a grey box with a red and green arrow. If I double click I get a box to find the file again but even if I point to the file again it dosn't show up. If I try to drag and drop on the timeline i get a message that it can't find the file even though the file exists and will open in Windows, Quicktime, etc.

markjreynolds1992 wrote:
Is there any way to force an install the latest from nVidia or is this a bad idea?
A previous poster with a Toshiba posted how he installed a generic driver. If I recall it was
Uninstall the graphics driver.
Remove the display driver from Device Manager.
Reboot declining prompts to install a driver.
Run the generic installer program.
I'll see if I can find the original post, I had it in my clipboard manager but that has the unfortunate habit of killing off its database every few months
Cheers,
Neale
Insanity is hereditary, you get it from your children

Can't open a video file after Final cut export

Very strange issue which getting me nuts.
I've FCP 7 on Lion.
I'm finishing a project and export it as it is on an external hard drive for back up.
I've got a .MOV file.
After that I'm making an other folder and export all the working file from FCP.
End of the story.
Later I want to open the Quic time video file... and then I've got an error message telling me that QT is looking for data of the video file "xyz-FIN-0000000e"
There is only a STOP button.
If I press it I've got a new error message telling me :
The file "xyz-FIN-0000000e" can't be found. Without it the video can't be play correctly"
(I'm translating the message from my french system)
So I can find sometimes the files is asking from the other folder (the FCP back up files) and then it open it...).
But WHY does the video file needs reference files ?
It was an export and I ask the exporter to make a self movie...
Realy I don't understand what's wrong.
Any cue ?
Thanks !
Jean do

Is this a Final Cut Pro .mov file. If it is it would open with FCP. Are you sure you saved with "self contained" checked. I seem to remember someone with a problem like this.
I think in the future you need to open your exported self contained FCP.mov files with quicktime Player and change the "open with" to quicktime player.
DM

Can't open my video files on PC computers

Hi, may be it was already discussed here but I couldn't find a topic.
I made a page in iWeb that includes a few video files (saved as .mov and .wmv). When I open this published web page on my Mac - everything seems to be fine, but PC (Windows) users can't run these videos on their computers.
Does anybody know what encoding should be to solve this problem?
thank you,
Vlad

Thank you,
All PC computers that can't see video files have
QuickTime 7 installed.
I tried to save video in flash format too but it
made
my files bigger and quality worse besides I can't
control video on the web page because it starts
over
and over again. I can't stop or pause.
May be I should try to change code on every page
like
they recommend here:
http://www.mediacollege.com/video/format/windows-media
/streaming/
but it'll be painful...
Vlad
Vlad Here is a SUPER SIMPLE solution for your dilema
You need to make a non-movie page, any will do. Start
your movie and take a photo of it with shift-apple-4.
This will give you an image of the movie and also the
Windows Media Player frame. Place this image on your
page, give it a title etc and make sure the image is
selected. Using the inspector, chose Link to File.
When you do this, navigate to the wmv file that
corresponds. When you upload your site, that file
will be stored along with it and when the link is hit
the wmv movie will launch in the windows media player
automatically for your PC friends.
Hope that helps
PS to last post if you have a program like "cleaner" your encoding should be
Windows Media >NTSC> 256K Streaming> 320X240> 30 fps that should result in about 1 Megabyte per minute of video with an "ok" quality if you want a better quality move up to "small" or medium" download will result in bigger files but better quality play with it till you are happy with the result.

Can we open cs photoshop file using photoshop elements 8

can we open a file created with photoshop cs by using photoshop elements 8? please...need help.

That should not be a problem... No renaming is needed. What kind of file is it (.psd, .tif)?
Juergen

Can't Import .avi xvid file with Premiere Elements 11

I just purchased Premiere 11, and it won't import an .avi xvid file. The codec is installed as reported by G-Spot. And the file imports to Win Movie Maker just fine. Any known problems here?
Thanks

I have used Premiere Elements 11 for a few years and never had any problems with codecs, it ran .avi files fine, but then my hard drive started sending failure eminent warnings so I saved everything I could (for some reason I was never able to save a backup with my old system), I got a new hard drive, loaded a clean new Windows 7 install and built my system from there.
When I got to the Premiere Elements 11 and used it I noticed it came up with the "no codec for .avi" message that I had never seen before and would not play the same .avi movies that I had played with it hundreds of times before.
I was a little baffled so I went back and installed my old Premiere Elements 8 that I used to use and same codec message came up.
I remembered that I had some other video players installed on my old system so I went back and installed the old players one by one.
1. Cyberlink PowerDVD from the original Dell install didn't fix the codec problem.....
2. I had the "REAL" player on my old system so I installed it next and it didn't fix the codec problem....(The new "REAL" player live is a little to aggressive for me so I uninstalled it when it didn't fix my problem)
3. I had Quicktime installed so I installed it again and BINGO, my Premiere Elements 11 now plays .avi files like it used to.
I won't guarantee it will work for everyone but the basic Quicktime player is free so it won't hurt to try it (And it definitely worked for me)

Can't open raw format files in photoshop elements 3.0

I'm sure this question has been posed here 1,000 times already, and I've just spent over an hour surfing the web, using adobe on-line support, etc. -- too much to sift through, and none of it giving me a simple answer.
So here's the question:
- Using Windows XP
- I have a Nikon D40
- Photoshop Elements 3.0
- 2.3 Camera Raw Plug In
From what I am able to gather, I SHOULD be able to open raw format files using PE 3.0, but I get the various error messages:
"Could not complete your request because it is not the right kind of document".
"Could not complete your request because the file-format module cannot parse the file".
Am I missing some sort of simple step before I start downloading plug-ins I don't need and messing up all the settings on my computer? Any help would be appreciated, and once again, apologies if I'm repeating a question that's been asked a million times before.

Support for the Nikon D40 was added in Camera Raw version 3.7. So you would need Photoshop Elements 4.0 or later to be able to use that.
To use your version you may need to download the free DNG converter from http://www.adobe.com/products/dng/ and convert your D40 files from NEF to DNG.
John

How can I open a .wmv file in Premier Elements 9, please

Premiere Elements just cannot see my .wmv movie in my Win 7 Movies folder (which is where it is located).
Thanks

More help...
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v09 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-version/dp/1453871209/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips

Can I open PSD Video files in premiere elements 12?

Similar Messages

Maybe you are looking for