Can I perform a lookup to verify the value of a variable is contained in another list column?

I am working in Sharepoint Designer and am trying to figure out how I can set a condition in an approval workflow to only complete a task if the value of a variable is contained in another list column. So if I had a list called A with column
A1 and I am working in the approval workflow, I only want the approval to complete if my variable is equal to any value in list A column 1. Otherwise I want to keep the approval task pending. I am very new to sharepoint so any help would be appreciated.
Thank you.

Hi,
You can use the condition "if any value equals value". Please refer below links for reference.
http://office.microsoft.com/en-in/sharepoint-designer-help/workflow-conditions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376962.aspx
http://www.codeproject.com/Articles/125120/Step-by-Step-Guide-in-Developing-your-own-Workflow
Best Regards,
Pavan Kumar Sapara.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar

Similar Messages

How Can I get the value of a variable name stored in another variable?

I have a scenario wherein i get a record as %rowtype as input parameter into my function and i generate a dynamic sql to check the validity of a particular value in one of the columns of the input parameter record.
I have a variable that stores the column name of input parameter record whose value is to be validated.
The dynamic SQL looks like this:
'Select empno from emp where empname = input_rec.'||v_colname
While using Execute Immediate I get the error - Invalid Identifiier -'input_rec'.'ename'
On Googling I found that the input parameter is out of the scope of the SQL that's being executed in the Execute Immediate.
Is there any way I can get the value of ('input_rec.'||v_colname) so that I can pass it into the Execute Immediate with 'Using' clause?

karthyk wrote:
I have a scenario wherein i get a record as %rowtype as input parameter into my function and i generate a dynamic sql to check the validity of a particular value in one of the columns of the input parameter record.
I have a variable that stores the column name of input parameter record whose value is to be validated.
The dynamic SQL looks like this:
'Select empno from emp where empname = input_rec.'||v_colname
While using Execute Immediate I get the error - Invalid Identifiier -'input_rec'.'ename'
On Googling I found that the input parameter is out of the scope of the SQL that's being executed in the Execute Immediate.
Is there any way I can get the value of ('input_rec.'||v_colname) so that I can pass it into the Execute Immediate with 'Using' clause?compose the SELECT in a single VARCHAR2 variable before passing variable to EXECUTE IMMEDIATE

Can we change the value of a variable in the driver program from sapscript?

Hello Experts,
I am currently developing a form wherein I need to change the value of a variable defined in the standard
driver program through the sapscript form. Unfortunately, I cannot customize this standard program since this is used by many other
subsidiaries. So, is there anyway that I can change a variable defined in the driver program via sapscript?
I tried to use a PERFORM to change its value but it is not working.
I hope you can help me guys. Thank you and take care!

SAP SCRIPT:
/: PERFORM GET_ATTNDEE_INFO IN PROGRAM ZHR_TRNG
/: USING &PPVAR-EOBJD&
/: CHANGING &ATTND&
/: ENDPERFORM
Executable Prog.:
REPORT ZHR_TRNG.
FORM GET_ATTNDEE_INFO TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA : LOC_CODE(8),
WF_NAME LIKE PA0001-ENAME, "----Location Code
WF_SOBID LIKE HRP1001-SOBID. "----Business Event Code
DATA: BEGIN OF ITAB_ECODE OCCURS 0,
ECODE(8),
END OF ITAB_ECODE.
DATA: NAME1 TYPE STRING.
READ TABLE IN_PAR INDEX 1.
LOC_CODE = IN_PAR-VALUE.
SELECT SOBID FROM HRP1001 INTO WF_SOBID
WHERE OBJID = LOC_CODE AND OTYPE ='E' AND PLVAR = '01' AND SCLAS = 'P'.
APPEND WF_SOBID TO ITAB_ECODE .
ENDSELECT.
IF SY-SUBRC = 0.
LOOP AT ITAB_ECODE.
SELECT SINGLE ENAME FROM PA0001 INTO WF_NAME
WHERE PERNR = ITAB_ECODE-ECODE ." AND ENDDA >= '31.12.9999' .
CONCATENATE 'Mr ' WF_NAME ',' NAME1 INTO NAME1.
IF SY-SUBRC = 0 .
OUT_PAR-NAME = 'ATTND'.
OUT_PAR-VALUE = NAME1.
APPEND OUT_PAR.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "GET_USR_INFO

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

Hi sashby51,
I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
Best,
Sara

How I can save the value of a variable in a database?

hello,
how I can save the value of a variable in a database? I need to keep the # of times you press click animation. to know how many times it has been seen.
I connect to msql database, using php, javascript, ajax and jquery, but not how to save the variable counter clicks from adobe edge Animate
appreciate your help so I can connect to the database from adobe edge animate.
thank you very much
Luis Felipe Garcia
[email protected]

Hi, all-
This isn't an Animate-specific issue, but I thought I'd take a stab at it anyway. As with anything else on the web, you need to have a server script to handle incoming data, so it's all back end work. Your page will need to call that script and provide parameters to that script that it can read.
The easiest way I can think of to do this (and this is all highly theoretical, so please make sure it's secure before you implement it) is to create a 1px div that has visibility off. Whenever you click, you can load your URL in that div, which then increments your counter on your db.
Hope that helps inspire some interesting solutions!
-Elaine

Can you change the value of a variable that is reset by a parameter?

Sorry if this is simple but I just crashed a package and can't do an autopsy. I suspect I sent it into an infinite loop. I know you can't change the value of any passed in parameters. What I tried to do was have the parameter set the value of a variable
and then I tried to change the value of the variable. Is that even allowed?
I was trying to do this:
MyCheckVariable = MyParameter (which equals true)
(some cool stuff happens)
MyCheckVariable = False
I hit F5 and my package turned into the Energizer Bunny. Is the way I try to reset the variable the culprit?

This is a prototype so I just created a project parameter and set it to true. In the real world the parameter will be used to control an optional part of the process because on a re-run after error that part doesn't have to be ran again.
So when I say MyCheckVariable = MyParameter (which equals true) in reality what I actually have is in the variables window I'm using an expression and it looks like this in the variables window
name = runDownload
Scope = Package
Data Type = Boolean
Value = True (but greyed out)
Expression = @[$Project::param_runDownload]

Hi there. I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id? Thanks in advance for your time and consideration!

Hi there. I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id? Thanks in advance for your time and consideration!

Hi there. I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id? Thanks in advance for your time and consideration!

[MDX]can't get the value from two variables (@FromDimTimeFiscalYearMonthWeekLastDateDay &(@ToDimTimeFiscalYearMonthWeekLastDateDay

can't get the value from two variables when execute MDX : Anyone who can help ?
================================
with member [Measures].[APGC Replied Volume] as
([Measures].[Question],[Dim Replied By].[Replied By].&[APGC])
member [Measures].[APGC Moderated Volume] as
([Measures].[DashBoard Thread Number],[Dim Moderated By].[Moderated By].&[APGC])
member [Measures].[APGC Answered Volume] as
([Measures].[Question],[Dim Answered By].[Answered By].&[APGC])
SELECT
NON EMPTY
[Measures].[Forum Thread Number],
[Measures].[Reply In24 Hour],
[Measures].[Question],
[Measures].[Deliverale Minute],
[Measures].[Working minutes],
[Measures].[Answered],
[Measures].[1D Answer],
[Measures].[2D Answer],
[Measures].[7D Answer],
[Measures].[APGC Replied Volume],
[Measures].[APGC Moderated Volume],
[Measures].[APGC Answered Volume],
[Measures].[Avg HTR],
[Measures].[Avg HTA],
[Measures].[Total Labor]
} ON COLUMNS,
NON EMPTY { ([Dim Engineer].[SubGroup-Alias].[Alias].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM (
SELECT ( STRTOMEMBER(@FromDimTimeFiscalYearMonthWeekLastDateDay, CONSTRAINED) : STRTOMEMBER(@ToDimTimeFiscalYearMonthWeekLastDateDay,
CONSTRAINED) ) ON COLUMNS
FROM [O365]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi Ada,
According to your description, you can't get the member when using the strtomember() function in your MDX. Right?
In Analysis Services, while the member name string provided contains a valid MDX member expression that resolves to a qualified member name, the CONSTRAINED flag requires qualified or unqualified member names in the member name string. Please check if the
variable is a Multidimensional Expressions (MDX)–formatted string.
Reference:
StrToMember (MDX)
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Can we use the value of a variable in an alert message

I have a variable in forms6i. I want to use the value of this variable in an alert message. How is this possible?

Gul wrote:
I have a variable in forms6i. I want to use the value of this variable in an alert message. How is this possible?Try
DECLARE err_txt VARCHAR2(200) t;
al_id ALERT;
al_button Number;
BEGIN
al_id := FIND_ALERT('My_Error_Alert');
SET_ALERT_PROPERTY(al_id, alert_message_text, 'Hello how are you mr. variable '||:variable_name );
al_button := SHOW_ALERT( al_id );
END; Hope it works..
Hamid

Not able to get the value of ODI Variable when i pass thru Option

Hi,
I have ODI variable called prev_etl_run_date which will hold the last successful etl run date. I want to use the value of this variable in one of my KM step.
But i don’t want to use directly in my KM. So I passed the variable name thru KM Option.
I intend to use the variable’s value in the KM step, as shown below:
<%=odiRef.getOption("MY_OPTION_1")%>
Here I am expecting the value of the variable, but here I am only getting the variable name only.
Is there any substitution method available in ODI KM , please help me to solve this issue.
Thanks
nidhi

ODI options are not intended for run time parameters. They are like design choices or debugging flags or parameters that can be specified in code template. Previous ETL run time stamp is hardly a design choice.
On the other hand, it is really a bad practice to put a variable inside KM directly. That creates a dependency that you can easily avoid by putting a filter using that variable in the interface.

How to get the value of a variable defined in javascript in JSP

how to get the value of a variable defined in javascript in/through JSP????

In Javascript you can use the DOM to access the input element and set it's value before submitting the form. Then it's value will just be passed.

How to get the value of a variable in FOX?

Hi,
In the FOX program how to get the value of a variable defined in planning area?
can anyone give me some sample code?
thanks

Adding to the last reply,
you can use VARI(variable) to get the count of the values.
In the latest version of BPS, you may also use the following new foreach construct:
FOREACH var IN VARIABLE variable_id.
Regards - Ravi

Change the value of a variable used in a View query

I am using JDeveloper 11g to develop a simple portlet application which displays data loaded from database. I am displaying the data by dragging the ViewObject from the AppModuleDataControl to the View.jspx page and selecting the option ADF Read-only Table. My ViewObject has a single variable :empId. Now is it possible to change the value of this variable with a value that comes from the request object. On the internet I found the following code:
        FacesContext facesContext = FacesContext.getCurrentInstance();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
        elFactory.createValueExpression(elContext, "#{data.AppModuleDataControl.dataProvider}",
        Object.class);
        ApplicationModule am = (ApplicationModule)valueExp.getValue(elContext);
        ViewObject emplVO;
        emplVO = am.findViewObject("EmployeeView1");
        emplVO.setNamedWhereClauseParam("empId", "1");I have put this code in the public void processAction(ActionRequest request, ActionResponse response) method. However this does not work when I deploy it.
Does anyone know if the above code is correct in this case and if there is a better way how I can set this up?

Hi there:
Did you add a break point and debug the code to see what is the value for the :empid parameters passed in to your view object?
If you are sure you have passed in the correct value for ":empid" parameter, then do the following:
String amDef = "yourAmDef";
String config = "yourConfig";
ApplicationModule am =
Configuration.createRootApplicationModule(amDef,config);
ViewObject emplVO;
emplVO = am.findViewObject("EmployeeView1");
emplVO.setNamedWhereClauseParam("empId", "1");
empVO.executeQuery();
which will execute your view object with the new bind variable value and refresh the view.
Please mark my answer as 'Correct' if it solves your problem, or 'Helpful' if it does.
Thanks,
Alex
Edited by: Alexbie on 27-Aug-2010 8:52 AM

How to change the value of a variable in new ABAP debugger.

Hi Guys,
I can't change the value of a variable in the new ABAP debugger.. when I change its revert back to old value. but this is not the case with the old version. How to do this..
Cheers
Senthil

Hi,
1. Dobule click in the variable in the variable tab.
2. Click the Change icon in Detail.Dis.
3. enter the new value and press enter
Refer
[http://www.sapdb.info/new-abap-debugger/|http://www.sapdb.info/new-abap-debugger/]
[http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm]
<removed_by_moderator_together_with_points>
Regards,
SB
Edited by: Julius Bussche on Jun 24, 2008 8:21 AM

Setting the value of a field based on a dropdown list

I am using the latest production release of JHeadstart 10.1.3.0.91. I am trying to set the value of a field based on selecting the value of another field (drop down list). The drop down list field has the following attributes set autoSubmit="true" immediate="true" valueChangeListener="#{jhsPageLifecycle.updateModelValue}".
The other field has the partialtrigger set to the first field. ie "depends on" selection from JHeadStart file. The value of the second field is set in the setter of the VO RowImpl java file.
The value of that field is only populated on the screen if it is set to disabled="true". This seems a bit bizzare behaviour. Can you explain why it cannot set the value of the field when it is not disabled.

Worked out that if i set the "Clear/Refresh value" attribute on the field that i want updated then it will work ok
Alan

Can I perform a lookup to verify the value of a variable is contained in another list column?

Similar Messages

Maybe you are looking for