"Phantom" Volume created on Server reboot when using SSHDD

10.6.2 Server - 1 X 128MB SSHDD - 3 X 1TB HDD (Raid 5)
System Volume is named: 10.6.2
Raid Array is named: Storage
As you probably know, on reboot, the SSHDD comes up faster than the RAID array. As a result typically a "Phantom" volume (Storage 1 - in my example) is created and mounted that points to an empty directory. Well, I have a new twist on this one. The "Phantom" volume (Storage 1) actually points to the correct files and "Storage" is now an empty folder.
The fix for this one is a bit more complicated than what typically happens, but I'm wondering if anyone knows if Apple has fixed this issue or if it is even possible to fix it?

[email protected] wrote:
Interesting that Apple has not dealt with it since 2008, so I guess there's no hope it will be resolved anytime soon.
There are limits to what Apple can do about this. If a program asks OS X to create a folder, it does so, even if that folder is in /Volumes. For OS X to behave differently, the /Volumes folder would have to be given a special status. You'd have to retain the ability for the disk mounter logic to create entries there as well as whatever deals with disk images, if that's different from the mounter. There may be other cases where routines would need that permission. In any case, I doubt it's a simple fix.
What amazes me is that the issue is not acknowledged when I have called tech support (at least three times) on this issue. You'd think AT LEAST there would be a white paper or document somewhere on how to deal with this (if they are not going to fix it).
That is a little disappointing.

Similar Messages

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

Problems creating a new folder when using webmail

Hi, has anyone else out there encountered problems when trying to create a new folder when using webmail ?
It just seems to create a new folder called 'New Folder' and misses out the step that would normally allow you to rename it to a title of your choice.
A whole list of folders called 'New Folder' is about as useful as an ashtray on a motorbike.
It did used to work as I've used it many times in the past.....but then so did a lot of things before the 'new' and 'improved' version of BT Mail came along.
Any help or suggestions gratefully received (apart from the obvious solution, switch to a mail client).
Maybe it needs flagging to the 'techies'......they must be really busy trying to sort out all the so called teething problems.
Solved!
Go to Solution.

What should happen is that when you click on the + for add a new folder a box should appear, somewhere amongst the folder list. (The list is in alphabetical order so if you have a number of folders previous to the letter N it maybe out of view ) .
The box will have the text " New folder-X," ( see below for the explantion for the -X ) you then delete the text, type in the name you want, hit enter and there it is.
If you don't notice the box, possibly because it's off screen further down the list, you then open and close the list, or log out the next time you view the list it, or they, are simply named New folder.
So you now have umpteen " New folders ", here's how to rename them.
Place your cursor on the word New Folder in your folder list, you will see a little box appear with" New folder-X," x being the number of the new folders you have created., eg -0, -1, -2 etc.
Then double click on it, you should then get a larger box with New folder-X.
Delete the text in the box, type in the name you want for the new folder, hit enter there's you newly named folder.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

What OS version are you running?
Try the upgrade button here:
http://www.apple.com/osx/how-to-upgrade/

Error Creating Reports Server Components when installing 11.1.1.2

Hi There
I'm trying to install a A WLS(11.3.2) and Forms/Report 11g (11.1.1.2 bundle) on a Linux RedHat 5.5.
But when the configuration tools of Forms/Reports is trying to create the reports server I got the following error:
Executing Task: Creating Reports Server Components
ALERT: Invalid component name: ReportsServer_fd-red03.in.fd.dk_asinst_1 (Component name must begin with an alphabetic character; may only contain alphanumeric characters, or the underscore (_) or hyphen ( -) characters; and must be 4 to 30 characters long.) Continuing anyway.
progress in calculate progress4
Executing Task: Executing: opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
GJS: About to call startOpmn
GJS: Entered startOpmn
*************** Trying to Start OPMN **************
*************** Executing Command **************
/home/oastest/Oracle/Middleware/asinst_1/bin/opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
As I read the error message is the component name illegale and I guees that whats cause the Report Server to faile.
But how does the install tool figure out the name: ReportsServer_fd-red03.in.fd.dk_asinst_1 ?
And how do I prvent it from happens again.
Note: "fd-red03.in.fd.dk" is the full hostname
Regards Hans S

Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo

Passing arguments to Managed Server ServerStart when using Node Manager

Below is the procedure to pass arguments to Managed Server serverstart tab when using Node Manager to start and stop the Managed Server instance
For passing the JVM arguments we will have to use "-server" which is hotspot and then pass the arguments
for eg: "-server -Xms2048m -Xmx2048m -verbosegc"
For adding jar's to the classpath you will have to add weblogic.jar and weblogic_sp.jar from WL_HOME/server/lib directory as well along with the custom jar (In some cases we can ignore weblogic_sp.jar, just adding weblogic.jar will do).
for eg: "\home\user\debug.jar;\home\user\bea\wlserver_10.3\server\lib\weblogic.jar;\home\user\bea\wlserver_10.3\server\lib\weblogic_sp.jar;"
- - Tarun

Hi,
To me, if you don't wanna use the NodeManager, you won't be able to start your managed servers with WLST.
I guess the only ways are :
* through the console / WLST using the NodeManager
* using the startManagedWebLogic.[cmd/sh]
Regards

Nokia N81 reboots when using wireless LAN

HAs anybody else come across this problem, I have a N81-3 with 8Gb sim card, basically when using wireless lan it reboots, I see there is a firmware upgrade that improves wifi stability but when using the software upgrader it says there are no updates available for my phone, any ideas.??

The CR-200 only charges at 750mA and I am not even sure that is 100% transferred through the Qi charging. Charging at less than 1A will likely not be enough to keep up with the drain from using the phone while navigating. I think it will use much more than that.
I use a Anker 13.000 mA battery with my phone while rinding my bike and have had several instances where I accidentally used the 1A output (it has both a 1 and 2 A output) to find that would actually not keep up with the phone running navigation and cycle tracking apps running (in addition to cellular and some other tasks).
Navigation _will_ require some serious amount sof power and _will_ in general make the phone feel warm to the touch. I very much doubt a wireless charger will be able to provide the juice needed to keep up the charge.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Problem creating a new row when using tabbed regions

I am new to JHeadstart and ADF and have been using the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its efficacy for a new significantly-sized application. As part of that evaluation I have created a small application (you can do this with HR schema using say the Departments table) with a single entity and VO. On JHeadstart I have then placed some of the fields into multiple Item regions within a Tabbed region on the same page and below the Group (layout style Table, Table Overflow Style below With Splitter). Existing rows display fine and I can view the data on the separate tabs.
However, if I try to create a row, I can fill in the data on the main region, but if I fill in data on the first tabbed region I cannot switch to the next tab without an error being generated.
e.g. using Departments - fill in DepartmentId and DepartmentName on main region, fill in ManagerId on first tabbed region and try to switch to second tabbed region to fill in LocationId:
Missing mandatory attributes for a row with key null of type HRModule.DepartmentsView1
Attribute DepartmentId in HRModule.DepartmentsView1 is required.
Attribute DepartmentName in HRModule.DepartmentsView1 is required.
If you save, then you can navigate.
You can also demonstrate something similar (different error message but probably the same root cause) on the myJHSTutorial demo. If you navigate to an employee off the regions page and try and create a new employee (using the '+' button below the 'Employees' label), then the tabs are not refreshed and any attempt to change the tabs results in an error
Failed to validate a row with key oracle.jbo.Key[999 ] in HRModule.EmployeesView3
Attribute Salary in HRModule.EmployeesView3 is required.
Salary must be between 6000 and 12000 for this job.
The JHS devguide does not help. Any thoughts? I can send the HR sample if you wish.

OK, I was able to reproduce this. The problem is that when you switch tabs, a partial page request is send to the server which does not include the items filled in the table row itself, hence these items are not updated in the underlying view object row.
Solution is to have a partial trigger at the table or group level listening to tab events. We will add that to the next release, but you can also apply the fix yourself by adding the following lines to the stackedRegionContainer.vm template:
#if (${JHS.current.pageComponent.tableLayout} && !(${JHS.current.pageComponent.hasOverflowInline}))
## when creating a new row in a table, and using overflow right/below, when switching overflow tabs
## the items filled in the table itself must also be processed as part of JSF model update phase, to
## prevent required item error when clicking another tab in overflow area
## we can enforce this by making the whole group listen to tab events
#ADD_CUR_GROUP_PARTIAL_TRIGGER("#REGION_ID()Tabs")
#end
Add these lines just before the line starting with
<af:${elemName}
Steven Davelaar,
JHeadstart team.

Error 500--Internal Server Error when using BI Publisher within OBIEE 11g

I'm using OBIEE 11.1.1.6.2BP1 on a Linux x86-64 server and it has been working just fine. We recently started playing around with the BI Publisher component of that installation and every time i go to http://hostname:port/xmlpserver and try to log in with an Administrator username and password, the following error shows up:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.5.1 500 Internal Server Error*
The server encountered an unexpected condition which prevented it from fulfilling the request.
I have looked around for solutions and tried a couple of them (created a new Admin user in Weblogic Console and checked the opmnctl status) and they did not help. I'm looking for an answer other than upgrade to the latest and greatest
Any help is appreciated.

Do you have any SSO setup as that might be preventing the ability of the user to log into BI Publisher, hence the Internal 500 error message.
Are you using FMW security model for BIP and OBIPS integration which is by default. Check the xmlp-server-config.xml file from the repository [\Middleware\Oracle_BI1\clients\bipublisher\repository\Admin\Configuration\xmlp-server-config.xml] and see what your security model is pointing to?
Also what happens when you try to access from Administration>BI Publisher >Manager BI Publisher ?
Follow : http://docs.oracle.com/cd/E23943_01/bi.1111/e22255.pdf
Oracle Fusion MiddlewareAdministrator's Guide for Oracle Business Intelligence Publisher 11g Release 1
HTH,
SVS

How do I create a master page when using Project7 templates?

Hi,
I am using P7 templates to easily create a nice website. However, I would like to create for example the main menu only once and have it re-used on every page or at least every page I want to. I think this is a called a masterpage (?) where you can tag parts to be re-used on other pages.
Can somebody please tell me where I can find support, examples, tutorials on this? Or can somebody tell me how to do this in a P7 template?
Thanks in advance!!
Robert (Netherlands)

You want to save your project page as a DW Template from which your other site pages will be spawned. Or, you want to use Server-Side Includes (SSIs).
Guidance on when to use DW Templates and SSIs -
http://www.adobe.com/devnet/dreamweaver/articles/ssi_lbi_template.html
More on DWTemplates -
http://forums.adobe.com/message/2032104#2032104
More on SSI -
http://forums.adobe.com/message/2112460#2112460
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

How to create user in UME when using ABAP as datasource

hi, everyone
We are using ABAP as EP user datasource, when create user in EP, it says "Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration."
But we can not create in UME neither, anyone know how to do this?
Lee

Hi,
Solution would be to disconnect the UME from ABAP and reboot the portal, create the user in UME, and revert back to the UME/ABAP connection again... but this is not supported:
Changing Data Source
Once you have chosen this data source configuration, you cannot change to any other data source configuration. For details, see SAP Note 718383.
Source: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/af3ac012d32e78e10000000a155369/frameset.htm
Ask the autorisation team of the ABAP stack that is connected to you UME to create the user for you is the only solution.
Cheers,
Benjamin

Application server crashes when using JCO

Hi,
I am currently dealing with JCO Version 2.1.8.
For testing purposes, I want to receive data from a Remote Function Module existing in our SAP development system.
Therefore I created a simple Java servlet:
public class POA_EDS_Servlet extends HttpServlet {
   private static final long serialVersionUID = 1L;
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
   response.setContentType("text/html");
   PrintWriter out = response.getWriter();
   out.println("<html>");
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
     response.setContentType("text/html");
     PrintWriter out = response.getWriter();
     String uri = request.getParameter("uri");
     JCO.Client connection;
     connection = JCO.createClient("200",
               "DAHMSMA",
               "EN",
               "vmw3063.wdf.sap.corp",
                              "00");
     try {
        connection.connect();
     catch (Exception ex) {
          ex.printStackTrace();
          System.exit(1);
After deploying and when running this servlet, the application server is crashing. That means I have to restart the server via Remote Desktop Connection.
Can anybode provide some help?
Regards
Marco
Edited by: Marco Dahms on Sep 8, 2009 3:30 PM
Edited by: Marco Dahms on Sep 8, 2009 3:33 PM

Hello there,
Can you please paste your defaultrace.log here. This log file will show the exception occured before the crash.
For better debugging always using a logging mechanism and log the messages to a particular file.
Regards,
Vivek

Very weird issue with server logging when using log4j.properties file

I'm using log4j logging. In log4j.properties the root logger is set up to use the ServerLoggingAppender class so that all our application logs go to the main server logfile. In addition, there are several appenders defined for specific components, with output going to specific per-component log files. Everything is going fine until I launch the server console. At this point all of those per-component log files get wiped out (zero length) and some non-ASCII lines are written to at least one of these files, after which the logs appear to be fine. The main server log file does not appear to be affected (because the root logger is set to "warn" level, while component-specific loggers are set to trace, the contents in these files is different; however I tried disabling all the other appenders and turning the root logger up to trace, and that still did not re-create the problem in the main server log file.
And here's the really weird part -- if I use the same configuration, but in a log4j.xml file, the problem does not happen.

Figured it out.
We were passing in the configuration for log4j as -Dlog4j.configuration=file:/<properties file> and this was added to the command line for both the managed and admin servers. Problem is that the console app starts its own instance of log4j, and when it reads the configuration for the appenders it initializes or rolls over the files. At some point we have two JVMs accessing the same files, so some corruption is bound to happen.
I'm not clear why the .xml file made a difference, but earlier we had been passing the log4j configuration as a jar file placed in the domain/lib folder, so perhaps the designer reverted to that (placed the log4j.xml file in a jar in lib, and not simply changed the -Dlog4j.configuration=file:/ option.

Hardcoded BAM server parameters when using BAM sensors

The problem we're having is that when a BPEL process has BAM sensors, the BAM server configuration parameters are hardcoded in bpel.xml and sensorAction.xml.
This causes problems when the process is being deployed to a different instance than the development instance.
I solved the problem for the bpel.xml file with the <customize> ant task, but haven't found a solution yet for sensorAction.xml.
Any suggestions?
Thanks,
Arnold van Koppen

See..when the BAM Server is down the corresponding data objects wont be available to you..During the design time wat u do is create a variable which contains the elements dat u wanna monitor in the BAM...IN BAM u create data objects ..then u map the schema from the BPEL to the BAM Data Objects ...U need a BAM Server connection which pulls up the metadata from the server ..If the BAM Server is down u wont get the BAM DOs...to keep a back up u can use DB as the sensor action so that the data from the sensor action is written to the DB..Using a DB Adapter i think the data from the Reports schema can be written to the OracleBAM schema ...so that even if the BAM Server is down the data is written to the OracleBAM schema

500 internal server error when using attendance in ESS

Hi All,
when the user clicks on attendance & its related activities in ESS, the following error is displaying frequently and after sometime it is working properly. why it is giving error frequently and how to avoid this error permanently?
Related Activities
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0, 0, 0(:main:, row:1, col:3)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2785)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
... 69 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:12:34[UTC], changelist=421181, host=pwdfm101), build date: Tue Oct 16 13:15:01 BST 2007
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: amd64
Session & Other
Session Locale en_GB
Time of Failure Thu Jan 24 11:58:41 GMT 2008 (Java Time: 1201175921417)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to read deployment descriptor.
at com.sap.tc.webdynpro.serverimpl.core.deployment.AbstractDeployableObject.initializeDeployableObjectParts(AbstractDeployableObject.java:297)
at com.sap.tc.webdynpro.serverimpl.core.deployment.AbstractDeployableObject.getPart(AbstractDeployableObject.java:214)
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.getDeployableObjectPart(DeployableObjectFactory.java:113)
at com.sap.tc.webdynpro.services.sal.deployment.api.WDDeployableObject.getDeployableObjectPart(WDDeployableObject.java:62)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:921)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:176)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$ComponentUsageManager.createVACComponentUsage(FPMComponent.java:745)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:562)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:772)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:707)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:723)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to find deployment descriptor '.\temp\webdynpro\public\sap.com\msseeproarchiveddocuments\webdynpro\portalapp.xml' on the file system. Please check if the application 'sap.com/msseeproarchiveddocuments' is deployed correctly.
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObject.getDeploymentDescriptor(DeployableObject.java:278)
at com.sap.tc.webdynpro.serverimpl.core.deployment.AbstractDeployableObject.initializeDeployableObjectParts(AbstractDeployableObject.java:259)
... 58 more
Caused by: com.sap.tc.webdynpro.spi.WebDynproRuntimeException: Unexpected IO exception on GET<sap.com/msseeproarchiveddocuments>
at com.sap.engine.services.webdynpro.WebDynproContainer.getDeployableObject(WebDynproContainer.java:209)
at com.sap.engine.services.webdynpro.WebDynproRuntimeServiceImpl.getDeploymentDescriptor(WebDynproRuntimeServiceImpl.java:354)
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObject.getDeploymentDescriptor(DeployableObject.java:274)
... 59 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0, 0, 0(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0, 0, 0(:main:, row:1, col:3)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:76)
at com.sap.engine.services.webdynpro.PApplication.load(PApplication.java:142)
at com.sap.engine.services.webdynpro.WebDynproContainer.getDeployableObject(WebDynproContainer.java:204)
... 61 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0, 0, 0(:main:, row:1, col:3)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2785)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
... 65 more
Thanks in advance,
v

Hi,
We were also having the same problem; but we couldnt find a specific solution for that problem.
But when we upgraded the ESS support packages to SP13 for some other reason this issue was also got resolved.
May be helpful i guess.
Regards,
Vijay

"Phantom" Volume created on Server reboot when using SSHDD

Similar Messages

Maybe you are looking for