Can I read more than 2 analog inputs from myDAQ?

Hello, 
I am trying to read 3 voltage values. However, the myDAQ only has 2 analog inputs.
There are multi-meter ports in the myDAQ as well. Could I read the 3rd value via this port?
How would I read these values via the DAQ assit on labVIEW?
Thanks in advance. 
Yzhi 

Hello Yzhi,
You can acquire from the DMM and the analog inputs using two parallel tasks. The simplest way is to configure one DAQ Assistant for the AI channels, and another DAQ Assistant for the DMM channel. Be aware that the DMM is a software-timed single-point measurement (no hardware waveform acquisition), so you can't tightly synchronize the DMM with the Analog Inputs.
Here is a screenshot demonstrating how to acquire from all three channels. You could also run the DMM in a separate loop so it doesn't slow down AI.
Good luck and let us know if you have any other questions.
Charles Y.
National Instruments
Attachments:
myDAQ acquire two AI and DMM.jpg ‏196 KB

Similar Messages

  • Simultaneously read more than one input and generate output

    Is it possible To simultaneously read more than one input and generate outputs depending on these inputs? If this isn't possible what is the best way to go about making some sort of timed loop that will read an input, read the next input, decide whether or not to output and so on. Hope someone can help. Thanks.Message Edited by Esmith13 on 05-25-2005 01:36 PM

    Hi,
    You should look at the synchronized examples for analog input and output that can be found in the example finder under:
    Help>>Find Examples>>Hardware Input and Output>>DAQmx>>Synchronization>>Multi-Function
    These will get you started to being able to handle multiple tasks at the same time.
    I hope this helps. Have a Great Day!
    George

  • How can I select more than one song from the search results?

    I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
    Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
    Here is the link to that question: how can i select more than one song from drop down search bar
    I hope some Windows user can help me out.

    Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
    I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

  • Can I change more than one photo from color to black and white at one time?

    can I change more than one photo from color to black and white at one time?

    Check out iPhoto Batch Enhancer
    http://www.feroxsoft.com/ibe/index.php.en
    Regards
    TD

  • Can I manage more than one iTouch from one PC?

    A family member has an iTouch managed with iTunes on PC. Another family member would like an iTouch but does not have a computer.
    Can one manage more than one iTouch from one PC? How? Does one install separate instances of iTunes somehow on the PC for each device?
    There is also the desire to have separate Apple Store accounts for each device. We don't what synced devices.

    *How to use multiple iPods with one computer*
    The Apple support document How to use multiple iPods with one computer suggests a number of ways. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
    e.g.
    "Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
    "Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
    Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
    etc.
    I currently manage our family's five iPods using this system, each getting a different selection to suit their tastes and the capacity of their iPod. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
    tt2

  • Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?

    Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?

    Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.

  • How can i sync more than one folder from My Pictures to my iphone 4?, how can i sync more than one folder from My Pictures to my iphone 4?

    Hi,
    how can I sync more than one folder of pics from My Pictures on my computer to my iphone?

    http://support.apple.com/kb/HT4236

  • Can you print more than one copy from eprint.

    Does anyone know how to print more than one copy from eprint?

    Hi JJSS,
    Currently, the solution only offers one copy. If you need to print multiple copies, the workaround is to send the email multiple times.
    I work for HP.

  • How can i transfer more than one file from server to client

    Hi,
    our requirement is transfer more than one files from server to client using the
    webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
    regards
    mat

    just an idea ...
    for this purpose let us put aside security concerns and other potential problems....
    -- Get the content of a server directory with Filter and create zip file
    1) create a class that implements java.io.FilenameFilter ...
    2) define accept() method ...
    3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
    4) use java.util.Zip to create ZIP file on the server side
    -- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
    -- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
    5) use webutil to transfer file on the client
    6) use Java on client side to unzip transferred file
    if you think this is not too complicated, you should try ...
    Regards,
    Vladimir

  • How can we select more than one item from LOV in Query_Find form?

    Hi,
    I have a requirement i.e i want to select more than one customer number seperated by comma from the customer number lov field in the query_find form.How can we write the code for this requirement?
    and after clicking find it has to display notification form which contains the details of customer which you selected from Custome query_find form.
    Could you please help me out.
    Thanks in Advance,
    Dhana

    Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
    I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

  • How can I remove more than 100 emails from an SMPT account on  iOS 7 iPad?

    Is it possible to move or remove  a large number of emails from my inbox without having to check each message individually? If you delete the message from a web email account (SMTP) will that in turn remove those emails  from my iPad Mail inbox. I have an iPad 4th  Generation with iOS 7.0.3. Any suggestions would be appreciated.
    Thanks

    Although you can use more than one Apple ID on the device at a time, only one at a time can be used for EACH FEATURE like iTunes, Facetime and iMessages,

  • Can you display more than one library from the same account?

    If I open iTunes on two computers in my house, I can only show one library on my apple tv. When I turn on the second computer, the first library goes away.
    Can you show one at the same time?
    Thanks

    Welcome to the Apple Community.
    Yes you can share more than one library at a time, just make sure that the homesharing ID and password you use for each one is the same on all of the libraries.

  • How can i select more than one song from drop down search bar

    sometimes to make a playlist i will search my music library for a word & then add all the songs with that word in the title
    the drop down search bar will not allow me to select more than one song
    or
    will it?  & i just can't suss out how... maybe you know?
    if so, please tell me~!!!
    thank you

    hey i tried that before i posted this question... i tried all of the normal ways one would use to select more than one item...
    any click of any kind at all takes you out of the search drop down & into the main itunes window... where you are deposited back into the songs alphabetically... no longer are you seeing the results of the search...
    sigh
    at the risk of sounding like one of those people, the "old" itunes did not have this problem...
    grrrr... it seems to be that pesky drop down menu~ if only you could see the search results in the main list as opposed to only in the drop down thing

  • Can't send more than 1 photo from iPhoto to Mail since upgraded to Leopard

    Hi there,
    I'm using an older version of iPhoto (4.0.3). We recently upgraded to Leopard, and ever since then, we haven't been able to use the Email icon in iPhoto to attach photos in Mail. It prepares to send all the photos, but only attaches one to a message, and then I get an error message saying, "Mail got an error: Can't get paragraph 8 of content of outgoing message id (a long number). Invalid index."
    Does anybody have any idea as to what's going on here? It's very frustrating!!!
    Thanks in advance for your help!
    NB
    Message was edited by: NBla

    Brie Fly wrote:
    With the current software combination you are using, there IS actually this need -- your post (and others) here give evidence that it does not work otherwise. Your choices would seem to be -- in descending order of complexity -- a) revert to OS X 10.4, b) install a newer version of iPhoto, or c) take the extra step of exporting.
    Alternatively, have you tried preparing a new message first, then just dragging the selected images directly from iPhoto to your message?
    Um, you seem to be contradicting yourself, so I have no idea what you're talking about.
    As I already said, I DON'T NEED to take the extra step of exporting the photos into a folder, as I AM selecting and dragging the images directly from iPhoto into Mail.

  • Read more than one attribute from list of values record

    Hi,
    I am using Jdev 11.1.1.3.0.
    I have the following situation,
    have defined a read only view (schools information) which is a list of values for schools information ( schoolId, school name and school code) , I have to execute Query for that view as an Invoke Action in the executable s of the page,
    I need three attributes (A, B, C) in another view (name it student's school) to be set to the school information corresponding to a school chosen from a SelectOneChoice List
    I could not define the schools information as LOV for the attributes in the student's school, as I have to execute it in the executable s,
    I have an Iterator for the schools Information on the page and, bound the attribute A (from the student's school) SelectOneChoice as list to the school name (from school Information) , and then tried to read the current row of the schools Information Iterator like this inside a bean:
       Row  tempRow = getIteratorBinding("CmnLookupPrevSchoolRegView1Iterator").getCurrentRow();
       currStdPrevSchoolRow.setAttribute("B", tempRow.getAttribute("SchoolId"));
       currStdPrevSchoolRow.setAttribute("C", tempRow.getAttribute("SchoolCode"));but referring to the data saved in the DB, the values stored for the attributes B and C are not corresponding to the chosen school name , but corresponding to the first row of the iterator. ( not the current chosen)
    is there any suggestions, to have another approach to connect all the three attributes to the corresponding chosen values.
    or maybe it is just some properties for the Iterators,
    thanks in advance
    best regards,

    Hi,
    Have a look here: http://blogs.oracle.com/jdevotnharvest/2010/12/reading_the_selected_value_of_an_adf_bound_select_list_in_java.html
    If you read from a list binding then you get the row value from there as well - not from the iterator as lists don't change the current row
    Frank

Maybe you are looking for