Can I run a report based on the occurance of an event in the database
(eg some data has been inserted into a table)?
I read in the FAQ of Report that is possible and i have to use some PL/SQL stored procedures in the database that use the UTL_HTTP package (available in 7.3 or later) to issue the HTTP request to the server to run the report. However in the next release of Oracle Reports (Reports 9i), some PL/SQL procedures will be supplied to accomplish this.
Have someone any idea about this? and if someone have this package, can he send me an example.
thanks in advance.
Hello,
You will find documentation and examples in
Oracle9iAS Reports Services Publishing Reports to the Web
Release 2 (9.0.2)
Part Number A92102-01
11
Event-Driven Publishing
Take a look at :
http://otn.oracle.com/products/reports/htdocs/getstart/GettingStarted/index.html
too.
Regards
Similar Messages
-
Running Aging reports based on Document date in 2007
Hi All,
I have an issue while running the Receivables aging report in the 2007 version. The customer usually runs the reports based on the document date. Document date holds more importance in their case.
However, in the 2007 version, the aging report is totally governed by the posting date. For example, if I change the aging date, the posting date also changes to the aging date and viceversa. If I want to change the aging date to 01/31/09, the posting date u2018Tou2019 automatically changes to 01/31/09 and when we run the report, it will bring in all transactions until the posting date of 01/31/09.
But, the requirement is to leave the posting date as blank and give the document date u2018Tou2019 01/31/09. This will then pull all transactions until the document date of 01/31/09 irrespective of the posting date.
As a result, when you run the balance sheet with the document date of 01/31/09, receivables show a different balance. This discrepancy is due to the fact that AR Receivable aging report forces to keep the Aging date = Posting date.
This was not the case in SAP 2005 version where we were allowed to key in the aging date and the document date to get results based on document date.
This is very critical as they have recently upgraded from 2005 to 2007 and they are unable to reconcile the balances out of Balance sheet and Aging.
Please advise.
Thanks,
PayalHi Jitin,
We tried that as well but no luck. There is still a discrepency between what the aging shows and what the BS shows. When we put the Aging date as 01/31/09 and Document date as 01/3109, the posting date 'To' is automatically filled with 01/31/09, so it basically searches for all transactions with the posting date 01/31/09 and document date 01/31/09. This is not the requirement as we do not want to consider the posting date at all while running the aging.
I also have some screenshots if I can share. I am not sure if I should report this to SAP for further investigation or am I missing something here.
Thanks for your help.
Regards,
Payal
Edited by: Rui Pereira on May 1, 2009 10:48 AM -
How to create a report based on the selection of a node of a tree
Hello,
I am new to Oracle Apex and I was trying to build a tree and also an interactive report based on the empno column of the emp table.
I have created a tree based on emp table. Now I want to display records of the employee selected in the tree.
Here is the tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"ENAME" as title,
null as icon,
"EMPNO" as value,
null as tooltip,
null as link
from "#OWNER#"."EMP"
start with "MGR" is null
connect by prior "EMPNO" = "MGR"
order siblings by "ENAME"
Can anyone tell me step by step how to go from here?
I tried to follow the thread Re: tree question but could not understand much from it.The approach for reloading the page and displaying the report is quite simple.
<li>You start by creating a new page item which would be used to store the selected node ID , eg. P100_SELECTED_NODE (you can make it atext item and change it hidden once everything works as expected)
<li>Modify the tree query and change the link column in the tree definition SQL query to a link to the same
for example if your page is 100 , you would make the tree node link to the same page but set the P100SELECTED_NODE with selected node's id_
This done here
{message:id=4410987}
In this case it would be
'f?p=&APP_ID.:100:'||:APP_SESSION||'::::P100_SELECTED_NODE:'||EMPNO as link Now when you click on a tree node link , it would come back to the same page, but set the P100_SELECTED_NODE with the empno of the clicked node.
<li> All that is left to do, is changing your Report so that it refers to the new item inorder to filter the records for this employee i.e empno
SELECT ...
WHERE empno= :P100_SELECTED_NODE -
How can i run a windows based program on mac book pro
Can I run a windows based program on mac book pro mountain lion 10.8.4
You can use bootcamp to install windows natively on the hard drive. You then choose which OS you wish to use at startup - OS X or Windows.
You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware). -
Running reports stored in the database
Hi guys,
Is it possible to have Reports 6i produce reports that are
stored in the database? Looking at the documentation, it would
appear the report definition files (RDF) must be stored in the
filesystem. I don't really want to be handing out filesystem
access (managing and it) to people - is there a way around this?
Thanks,
denty.user5780461 wrote:
Hi,
Would anyone have any recommendations regrading running reports based on the data stored in an oracle database. We will soon go live with a project using an oracle DB. We do not wish to run reports directly from the production DB as it will impact performance. Have you actually measured the impact? If not, you are just making assumptions that -- lacking any other informatin -- appear to be invalid.
Is there any recommended method/architecture for reporting suggested by oracle for this type of scenario?
You make it sound like some unusual scenario. What you've described so far (running reports against an OLTP database) is just bread and butter operations for Oracle.
One idea is too runs some scripts that will write the data to another database and from there we will runs out reporting queries. Are there any other potential solutions?
And how does reading the data to insert into some other database cause less contention than reading data for a report?
>
Many thanks,
Ro -
Can we run alv reports in background
hi all
can we run alv reports in backgroundHi
Yes You can
see this
Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user wont have the actual Grid interface but the List interface.
There is a workaround to display ALV Grid in Background Job. The only restriction is you cant schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesnt have to go to SM37 to view the job status/log. Once the Job Status is changed to COMPLETED, user can click on DISPLAY SPOOL to view the ALV Grid.
Limitations:
Cant schedulea background job
The session should be active until the background job is completed. If the session is closed, then user wont be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
Advantages:
If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
Interface of ALV Grid is available instead of ALV List even though its a background job.
Program wont give the TIME OUT error
Steps Required:
1. Once you execute the program, the following screen would be displayed
2. Click Display Job Status to check the Status of the Background Job
3. Click on Display the Job Log to check the Log
4. Click on Display Job Status to check the Job Status
5. Click on DISPLAY SPOOL to check the spool content once the Job Status is changed to COMPLETED. Output is displayed in ALV Grid
Programs:
1. Two different programs needs to be created
ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it wont be reflected in the spool.
ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
*& Report ZPROGRAM_ONE *
REPORT zprogram_one .
PRASHANT PATIL
TABLES : mara,
tsp01.
type-pools:slis.
TYPES : BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
END OF t_mara.
DATA : i_mara TYPE STANDARD TABLE OF t_mara,
wa_mara TYPE t_mara,
wa_index TYPE indx, " For Index details
wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
i_jobsteplist TYPE STANDARD TABLE OF tbtcstep, " For spool number
wa_params TYPE pri_params, " To Get Print Parameters
wa_jobhead TYPE tbtcjob, " To know the status of job
wa_jobsteplist TYPE tbtcstep, " To know the spool
w_jobname TYPE tbtco-jobname, " Job name for bckgrnd job
w_jobcount TYPE tbtco-jobcount, " Unique id for bckgrd job
w_path TYPE string, " Upload path
w_lsind TYPE sy-lsind, " Index
wa_seltab TYPE rsparams,
i_seltab TYPE STANDARD TABLE OF rsparams,
wa_index1 TYPE indx, " For Index details
wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
CONSTANTS DECLARATION *
CONSTANTS :
c_a(1) TYPE c VALUE 'A',
c_m(1) TYPE c VALUE 'M',
c_l(1) TYPE c VALUE 'L',
c_c(1) TYPE c VALUE 'C',
c_zfdr(4) TYPE c VALUE 'ZFDR',
c_x(1) TYPE c VALUE 'X',
c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
c_f(1) TYPE c VALUE 'F', " Job Status - Failed
c_s(1) TYPE c VALUE 'S',
c_p(1) TYPE c VALUE 'P'.
SELECTION SCREEN PARAMETERS
SELECT-OPTIONS : s_matnr FOR mara-matnr.
START-OF-SELECTION.
Before the export, fill the data fields before CLUSTR
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
EXPORT s_matnr
TO DATABASE indx(st) FROM wa_index ID wa_index_key.
To Open the Job for background processing
PERFORM open_job.
To get the print parameters
PERFORM get_print_parameters.
Submit the job in background
PERFORM job_submit.
Close the background job
PERFORM job_close.
This is the output screen with the buttons ********
Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
SET PF-STATUS 'ZS001'.
WRITE: / 'The program is submitted in Background'.
WRITE: / 'Press DISPLAY SPOOL to see the spool'.
WRITE: / 'Press STATUS to see the status of the background'.
AT USER-COMMAND.
If user presses the 'BACK' button
IF sy-ucomm = 'BAK'.
IF wa_jobhead-status = c_f OR
wa_jobhead-status = c_a.
LEAVE TO SCREEN 0.
ENDIF.
ENDIF.
If the user presses the 'DISPLAY SPOOL' Button
IF sy-ucomm = 'DISPLAY'.
PERFORM display_spool.
ENDIF.
If the user presses the 'JOB STATUS' Button
IF sy-ucomm = 'STATUS'.
PERFORM display_status.
ENDIF.
If the user presses the 'JOB LOG' Button
IF sy-ucomm = 'JOBLOG'.
PERFORM display_job_log.
ENDIF.
*& Form open_job
text
--> p1 text
<-- p2 text
FORM open_job .
This is to Create a new job which is to be submitted in background to
process sales order/delivery/invoice
Here we would get a unique id ( Jobcount ) which identifies our job
along with the job name which we have assigned to our job
CONCATENATE sy-uname
sy-datum
sy-uzeit
INTO w_jobname . " Assign unique jobname
CALL FUNCTION 'JOB_OPEN'
EXPORTING
DELANFREP = ' '
JOBGROUP = ' '
jobname = w_jobname
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
JOBCLASS =
IMPORTING
jobcount = w_jobcount
CHANGING
RET =
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " open_job
*& Form get_print_parameters
text
--> p1 text
<-- p2 text
FORM get_print_parameters .
DATA : l_valid TYPE c.
This is to get the Print Parameters for the job which is to be
submitted in background to process sales order/delivery/invoice
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_ID = C_CHAR_UNKNOWN
ARCHIVE_INFO = C_CHAR_UNKNOWN
ARCHIVE_MODE = C_CHAR_UNKNOWN
ARCHIVE_TEXT = C_CHAR_UNKNOWN
AR_OBJECT = C_CHAR_UNKNOWN
ARCHIVE_REPORT = C_CHAR_UNKNOWN
AUTHORITY = C_CHAR_UNKNOWN
COPIES = C_NUM3_UNKNOWN
COVER_PAGE = C_CHAR_UNKNOWN
DATA_SET = C_CHAR_UNKNOWN
DEPARTMENT = C_CHAR_UNKNOWN
destination = c_locl " LOCL
EXPIRATION = C_NUM1_UNKNOWN
immediately = space
IN_ARCHIVE_PARAMETERS = ' '
IN_PARAMETERS = ' '
LAYOUT = C_CHAR_UNKNOWN
LINE_COUNT = C_INT_UNKNOWN
LINE_SIZE = C_INT_UNKNOWN
LIST_NAME = C_CHAR_UNKNOWN
LIST_TEXT = C_CHAR_UNKNOWN
MODE = ' '
new_list_id = c_x
PROTECT_LIST = C_CHAR_UNKNOWN
no_dialog = c_x
RECEIVER = C_CHAR_UNKNOWN
RELEASE = C_CHAR_UNKNOWN
REPORT = C_CHAR_UNKNOWN
SAP_COVER_PAGE = C_CHAR_UNKNOWN
HOST_COVER_PAGE = C_CHAR_UNKNOWN
PRIORITY = C_NUM1_UNKNOWN
SAP_OBJECT = C_CHAR_UNKNOWN
TYPE = C_CHAR_UNKNOWN
user = sy-uname
USE_OLD_LAYOUT = ' '
UC_DISPLAY_MODE = C_CHAR_UNKNOWN
DRAFT = C_CHAR_UNKNOWN
ABAP_LIST = ' '
USE_ARCHIVENAME_DEF = ' '
DEFAULT_SPOOL_SIZE = C_CHAR_UNKNOWN
PO_FAX_STORE = ' '
NO_FRAMES = C_CHAR_UNKNOWN
IMPORTING
OUT_ARCHIVE_PARAMETERS =
out_parameters = wa_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_print_parameters
*& Form job_submit
text
--> p1 text
<-- p2 text
FORM job_submit .
The job which we have created & the unique id ( jobcount ) which we
have got identifies our job. Hence those parameters are passed along
with the name of the background program "ZPROGRAM_TWO"
The job is submitted in background.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
ARCPARAMS =
authcknam = sy-uname
COMMANDNAME = ' '
OPERATINGSYSTEM = ' '
EXTPGM_NAME = ' '
EXTPGM_PARAM = ' '
EXTPGM_SET_TRACE_ON = ' '
EXTPGM_STDERR_IN_JOBLOG = 'X'
EXTPGM_STDOUT_IN_JOBLOG = 'X'
EXTPGM_SYSTEM = ' '
EXTPGM_RFCDEST = ' '
EXTPGM_WAIT_FOR_TERMINATION = 'X'
jobcount = w_jobcount
jobname = w_jobname
LANGUAGE = SY-LANGU
priparams = wa_params
report = 'ZPROGRAM_TWO'
VARIANT = ' '
IMPORTING
STEP_NUMBER =
EXCEPTIONS
bad_priparams = 1
bad_xpgflags = 2
invalid_jobdata = 3
jobname_missing = 4
job_notex = 5
job_submit_failed = 6
lock_failed = 7
program_missing = 8
prog_abap_and_extpg_set = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " job_submit
*& Form job_close
text
--> p1 text
<-- p2 text
FORM job_close .
Once the job is submitted in background then the job is closed
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
AT_OPMODE = ' '
AT_OPMODE_PERIODIC = ' '
CALENDAR_ID = ' '
EVENT_ID = ' '
EVENT_PARAM = ' '
EVENT_PERIODIC = ' '
jobcount = w_jobcount
jobname = w_jobname
LASTSTRTDT = NO_DATE
LASTSTRTTM = NO_TIME
PRDDAYS = 0
PRDHOURS = 0
PRDMINS = 0
PRDMONTHS = 0
PRDWEEKS = 0
PREDJOB_CHECKSTAT = ' '
PRED_JOBCOUNT = ' '
PRED_JOBNAME = ' '
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS
strtimmed = c_x
TARGETSYSTEM = ' '
START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
START_ON_WORKDAY_NR = 0
WORKDAY_COUNT_DIRECTION = 0
RECIPIENT_OBJ =
TARGETSERVER = ' '
DONT_RELEASE = ' '
TARGETGROUP = ' '
DIRECT_START =
IMPORTING
JOB_WAS_RELEASED =
CHANGING
RET =
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " job_close
*& Form display_spool
text
--> p1 text
<-- p2 text
FORM display_spool .
To Read the Job to get the spool details
DATA : l_rqident TYPE tsp01-rqident, " Spool Number
l_spoolno TYPE tsp01_sp0r-rqid_char.
CLEAR : l_rqident,
w_lsind,
wa_jobsteplist.
REFRESH : i_jobsteplist.
SET PF-STATUS 'ZAR02'.
Get the Spool Number
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '20'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Read the Job Step list to get the spool number
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
Spool Number
l_rqident = wa_jobsteplist-listident.
MOVE l_rqident TO l_spoolno.
Check the spool in TSP01
SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
IF sy-subrc = 0.
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = l_spoolno
IMPORTING
RC =
STATUS =
PERFORM show_alv.
ENDIF.
w_lsind = sy-lsind.
IF sy-lsind GE 19.
sy-lsind = 1.
ENDIF.
ENDFORM. " display_spool
*& Form show_alv
text
--> p1 text
<-- p2 text
FORM show_alv .
Before the import, fill the data fields before CLUSTR.
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT i_mara
FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
FREE MEMORY ID wa_index_key1.
This prepares the field-catalog for ALV.
PERFORM prepare_fieldcatalog.
This displays the output in ALV format .
PERFORM display_alv.
ENDFORM. " show_alv
*& Form display_status
text
--> p1 text
<-- p2 text
FORM display_status .
To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '20'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
WHEN 'S'. WRITE: / 'Scheduled'.
WHEN 'R'. WRITE: / 'Released'.
WHEN 'F'. WRITE: / 'Completed'.
WHEN 'A'. WRITE: / 'Cancelled'.
WHEN OTHERS.
ENDCASE.
IF sy-lsind GE 19.
sy-lsind = 1.
ENDIF.
ENDFORM. " display_status
*& Form display_job_log
text
--> p1 text
<-- p2 text
FORM display_job_log .
To display the log of the background program
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
EXPORTING
client = sy-mandt
jobcount = w_jobcount
joblogid = ' '
jobname = w_jobname
EXCEPTIONS
error_reading_jobdata = 1
error_reading_joblog_data = 2
jobcount_missing = 3
joblog_does_not_exist = 4
joblog_is_empty = 5
joblog_show_canceled = 6
jobname_missing = 7
job_does_not_exist = 8
no_joblog_there_yet = 9
no_show_privilege_given = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_job_log
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = i_fieldcat
tables
t_outtab = i_mara.
ENDFORM. " display_alv
ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
*& Report ZPROGRAM_TWO *
REPORT zprogram_two .
PRASHANT PATIL
TABLES : mara.
TYPE-POOLS:slis.
TYPES : BEGIN OF t_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
END OF t_mara.
DATA : i_mara TYPE STANDARD TABLE OF t_mara,
wa_mara TYPE t_mara,
wa_index TYPE indx, " For Index details
wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
wa_index1 TYPE indx, " For Index details
wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
Before the import, fill the data fields before CLUSTR.
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT s_matnr
FROM DATABASE indx(st) ID wa_index_key TO wa_index.
FREE MEMORY ID wa_index_key.
SELECT matnr
ersda
ernam
laeda
FROM mara
INTO TABLE i_mara
WHERE matnr IN s_matnr.
PERFORM prepare_fieldcatalog.
PERFORM display_alv.
Before the export, fill the data fields before CLUSTR
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
EXPORT i_mara
TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = i_fieldcat
TABLES
t_outtab = i_mara.
ENDFORM. " display_alv
its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
In the PBO, add following code
SET PF-STATUS 'ZSTAT'.
If program is executed in background
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING
e_offline = off.
IF off IS INITIAL.
IF container1 IS INITIAL.
CREATE OBJECT container1
EXPORTING
container_name = 'CC_ALV1' .
ENDIF.
ENDIF.
CREATE OBJECT g_grid1
EXPORTING
i_parent = container1.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
i_save = 'A'
i_default = ' '
is_layout =
is_print =
IT_SPECIAL_GROUPS =
it_toolbar_excluding =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = i_output
it_fieldcatalog = i_fieldcatalog
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Reward points if useful
Regards
Anji -
Can I run a Java based app on an IPAD2 like JMRI Decoder-Pro?
I have an IPAD2 64GB Wi-Fi+3G. Can I run a JAVA based application known as JMRI Decoder-Pro? It is a Model Railroad suite of control applications that are JAVA based which provide online Train and alyout control via IPHONEs, Droids, Macs etc.
Hi,
I don't have an iPad.
You have posted in the iChat Forum Community.
iChat does not run on an iPad.
(ergo: I know nothing).
Try posting here (top level of iPad's area)
8:53 PM Thursday; June 16, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Is it possible to suppress the Page Header of the Main Report based on the Section Name?
Hi,
I am fairly new to Crystal Reports XI. Is it possible to suppress the Page Header of the Main Report based on the Section Name? Thanks.In the section expert you can enter a formula on the suppress function.
You just need something to check against if it is section name you say
{section name} ="Suppressme"
I have used it more in drill level to display headers based on how far you have drilled into a report.
Hope this helps
Eric
Via Christi Health System -
May i can't have Forms+Reports server on the same machine ?
Gurus!
I have installed Forms+Reports server on the same machine with their builders too. But then Forms & Reports server does not function when i call my .fmx file in browser the message,
"Java applet loading" appears but then the process hang up.
But when only installed Form server my .fmx file works.I also want to call my .rep files from forms.
May i can not have Forms+Reports server on the same machine?
Separately they work but not both but i require both how!
I have also seen when both installed and when i start services of both then ifweb60.exe is called two times in memory, it shows from task manager's process tab.
Please help!
Many thanks1. Check these files to make sure you have the correct port settings for your forms: formsweb.cfg, base.htm
2. In your Windows Registry:
a. Add path for Reports Server (REPORTSxx_PATH)
b. Make sure you also have FORMSxx_PATH defined
c. Check values of your OracleFormsServer.
HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Services
OracleFormsServer
Verify the values of Host, Mode, Pool and Port.
3. Check Metalink Note 97487.1 for additional info.
And YES, Apache, Forms, Reports and Graphics can all run in the same machine. -
Is there a way to hide some reports based on the selected values in prompt.
Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
AshishHi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/ -
How can I run 2 Dreamweaver windows at the same time?
How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
MauriceOpen the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
> -
Hello, I’m from Ecuador I would like to contract a service to call landlines. How much it cost? How many minutes to call I dispose? Do you have any annual plan? Is it possible to record the calls and Can I have a report of all the calls realized?
Hi to all Skypers in Equador! We have different options, so to help you choose, can you please tell us which country you will be calling most, is is landlines in Equador? A) If you are calling primarily in Equador, we have different subscriptions to call landlines: >> 60 minutes per month for landlines to Equador; the cost for this is US $5.99 monthly>> 120 minutes per month for landlines to Equador; the cost is US $10.79 monthly B) You can pay monthly or if you want, you can pay for 3 months and have 5% discountAnd if you want to pay for 12 months, you will have 15% discount C) You can access your calling history (Date & Time of the call, Number called, Usage) at any time by logging with your account on Skype.com then click on "My Usage" I hope this helps! Keep Skyping!
-
Can i view customer report as per the business area wise , region-wise how?
can i view customer report as per the business area wise , region-wise how?
Hi,
You can view the report business area wise, extract the report and go to dynamic selection and selection business area. When the report is display just sub total on business area. System is showing report as per your requirement.
Regards,
Pankaj -
How to run a report out of the web container?
Hi All,
<p>
Does anyone have tips on running a report outside of the web container? I'd like to be able to JUnit the scenarios I'm coding up without having an app server running. What is the ReportClientDocument expecting in the request, response, and context? The code as shown just returns the enclosed error.
<p>
All I'm really trying to do is have the report execute and be able to assert that the data is appropriately retrieved from the data source. If there's a way to do that without the Viewer, that would be cool, too.
<p>
Any tips would be much appreciated. Sorry about the poorly formatted code and error... the code tags don't seem to be working...
<p>
Thanks,
<p>
Eric
<pre>public void testReportRunning() throws ReportSDKExceptionBase{
ReportClientDocument rcd = initReportClientDoc("./test/data/EBTest1.rpt");
assertTrue(rcd.isOpen());
CrystalReportViewer crv = new CrystalReportViewer();
crv.setReportSource(rcd.getReportSource());
String htmlContent = crv.getHtmlContent(new MockHttpServletRequest(), new MockHttpServletResponse(), new MockServletContext());
System.out.println(htmlContent);
com.businessobjects.report.web.shared.WebReportingException---- Error code:0
at com.businessobjects.report.web.e.if(Unknown Source)
at com.businessobjects.report.web.e.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
at com.tririga.crystalpoc.ReportAccessorTest.testReportRunning(ReportAccessorTest.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at junit.framework.TestCase.runTest(TestCase.java:164)
at junit.framework.TestCase.runBare(TestCase.java:130)
at junit.framework.TestResult$1.protect(TestResult.java:106)
at junit.framework.TestResult.runProtected(TestResult.java:124)
at junit.framework.TestResult.run(TestResult.java:109)
at junit.framework.TestCase.run(TestCase.java:120)
at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130)
at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)</pre>
Edited by: Eric Batzdorff on Jun 12, 2009 12:24 AM
Edited by: Eric Batzdorff on Jun 12, 2009 12:24 AM
Edited by: Eric Batzdorff on Jun 12, 2009 12:25 AMThere's no documentation as to what's the minimum HTTPServletContext, HTTPServletRequest and HTTPServletResponse the CrystalReportViewer expects.
There certainly are plenty of unit testing frameworks for Java Web Apps out there, if that's where you're headed.
Sincerely,
Ted Ueda
Maybe you are looking for
-
Is there a keyboard stroke for tagging photos in iPhoto?
I would like to learn of a keyboard stroke for tagging photos in iPhoto. I called apple a while back and was told there is no such shortcut. You have to manually click on "add a face." Then, if you want to tag multiple people in one photo, you hav
-
Crystal Reports 2008 - Report off of Active Directory
Hello, I have found a few articles on how to do this, but they don't seem to follow my wizard. Can someone provide a tutorial on how to create a Crystal Reports 2008 report against active directory? I have been able to do the following so far: 1) Cre
-
Control design and simulation palette
Hi all I've recently installed LV 8.2 professional edition on my PC. Watching the function palette i've seen the sub-palette 'Control design and simulation' empty... Is it normal? Do i need some toolkit to see something in it? King regards I love the
-
Conditionally displaying different images in a report
Hello. I have a simple report. In one column of it I have a link to another report. Instead of showing the value for the column, I show an image using the column's Column Link's Link Text property. In the Link Text field, I put an <img src="#WORKSPAC
-
How do I set up 2 differnt ipods (touch and nano) on itunes