Can i run labview on Windows CE or embedded XP?

If it is possible, what are the minimum specifications for the PC? And can anyone recommend a manufacturer?

Basically, anything that will run on XP should run on XP Embedded. I am
presently running LabVIEW applications on XP Embedded. Windows CE is a
totally different operating system and will not presently run LabVIEW (NI
should verify this but I'm fairly sure this is true). You'll have to ask NI
when this will change but I think there will be CE support in the future.
XP Embedded should run on any PC that XP will run on but if you stick with
better known brands and components you'll have an easier time building your
XP application. Your speed should be similar to regular XP but your hard
drive space is usually a lot less because you strip out as much of the
operating system as you want. I am running on bootable CDs without any hard
drive.
"stew j" l> wrote in message
news:[email protected]..
> If it is possible, what are the minimum specifications for the PC? And
> can anyone recommend a manufacturer?

Similar Messages

Can you run labview on Windows Tablet PC Edition?

Can you run labview on Windows Tablet PC Edition?...or does LabVIEW executable and Run-time engine operate with this OS?

LabVIEW 7.x will run without any problems on a Windows Tablet PC with SP1. There have been documented issues with Windows XP SP2 and LabVIEW subsequently not exiting properly--LabVIEW's window closes but somehow it is still present in the task manager.
Hope this helps.

How do you create a program in Labview that can be run as a Windows Service?

I would like to create a Labview program that can be run as a Windows service. I have read the following Knowlegebase articles and have done what they say.
Creating a Windows NT Service Using LabVIEW http://www.ni.com/white-paper/3185/en
Running a LabVIEW Application as a Windows NT/2000/XP/Server 2008/7 User-Defined Service http://digital.ni.com/public.nsf/allkb/21BA0F671A63A60386256CB4004DF99B
When trying to start the service I get an error that says the program didn't respond to the start in a timely manner. I also set the "run when opened" parameter in the VI. I am programming in Labivew 2010, proffesional version. The server is running Windows Server 2008. Can anyone help? Is the ini file important in Windows Server 2008?

I haven't looked through all those links. But I have created Windows Services from LabVIEW executables way back when WinXP came on the market.
The problem with services is that they have no UI. So you can't really see what is going on. Your EXE might be failing or hanging due to some kind of error (most liklely a security/permissions error), but you can't see the error. So my advice is to either:
1. Have your EXE write lots of info to a log file. Write info that log every step in the application. If an error ocurrs, have it write the error info to the log file. That is a very useful debugging tool.
2. Use VI Server functions to monitor the service to see what is going on.

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]

Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself.

How can i run word through windows on my mac

how can i run word through windows on my mac

It is difficult to understand your question. Do you want to run Word in Windows on your Mac, or do you want to run Word on your Mac?
You can install Office for Mac.
http://www.microsoft.com/mac/products
Or you can install Windows and then install Office for Windows in your Windows installation.

How can I run MP350 with Windows 8.1 computer? Works OK with Windows 7 machine. Need drivers.

How can I run MP350 with Windows 8.1 computer?
It works OK with Windows 7 machine, using drivers from original CD.
Windows 8,1 machine doesn't find those drivers (which I copied to its C drive).
It doesn't find needed drivers on the internet.

Hi Larry-R,
I see that you made a later post regarding this. Please refer to the answer on that post regarding your inquiry.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can i run games for windows in bootcamp?

so can i run games for windows in bootcamp? and will they work properly?
thanks a lot!!
i'm sorry, i posted it here...it should be in "using OS X"...
Message was edited by: Nord1989

Well I'm not to sure by what you mean "Which games run on Mac". There are not many that run on Mac that are that great although there are a few. Mostly for any great games you would need to run Boot Camp. Keep in mind though that you still need a version of Windows, so if you don't have one laying around somewhere you still have to buy that. Here is a link for your Mac games.
http://store.apple.com/us/browse/home/shop_mac/software/games?mco=MjQzNDc3OQ&s=t opSellers
Hope this helps.
If you are wondering about Windows games that you may be looking for I only currently have Left 4 Dead which I have to say is an amazing game! I really don't have many games so I can't help to much in good ones.

Are there any issues regarding running Labview on Windows Vista

I am a cognitive psychology graduate student, and I am considering switching to LabView to display stimuli and gather RT data. I have previously used E-Prime for this task, but E-Prime doesn't seem to run well with Windows Vista. Are there any known issues regarding running LabView with Windows Vista?
Thanks
Chris

I've had no problems on Vista*. Only issue I've had was concerning how Vista uses fonts, but if you start on Vista and don't switch between XP and Vista, etc., then you'll be OK.
*no problems with LabVIEW's compatibility with Vista. Now, Vista in general, that's another story and not for this thread/forum.
Richard

I can't run itunes on windows 7 after upgraded it

I had installed Itunes working properly until last week, with my Ipod Touch. Recently I tried to upgrade the Itunes and after that I can't run it. Supposedsly Itunes was installed but don't run.
Please help me to fix this problem.

I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

Can't run Java on windows xp home

I have just downloaded jdk 5 on my windows xp home, and set PATH and CLASSPATH. But i still can't run java commands on cmd.
Please help.

when in the cmd prompt and you type "java" do you get the following?
C:\>java
Usage: java [-options] class [args...]
           (to execute a class)
   or java [-options] -jar jarfile [args...]
           (to execute a jar file)
where options include:
    -client       to select the "client" VM
    -server       to select the "server" VM
    -hotspot      is a synonym for the "client" VM [deprecated]
                  The default VM is client.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
                  A ; separated list of directories, JAR archives,
                  and ZIP archives to search for class files.
    -D<name>=<value>
                  set a system property
    -verbose[:class|gc|jni]
                  enable verbose output
    -version      print product version and exit
    -version:<value>
                  require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
                  include/exclude user private JREs in the version search
    -? -help      print this help message
    -X            print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
                  enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
                  disable assertions
    -esa | -enablesystemassertions
                  enable system assertions
    -dsa | -disablesystemassertions
                  disable system assertionsif not, please follow the instructions on this website on setting up the latest jdk.
http://www.discussjava.com/joomla/index.php?option=com_jd-wiki&Itemid=68&id=index:setting_up_the_1.5_jdk
let me know if it is any help.
null

Can I run LabVIEW DSC on Fieldpoint real time processor?

I want to use the Fieldpoint real-time processor as an OPC server on the network. Can I run DSC runtime on the Fieldpoint processor?

There are two separate questions here. One, can a FieldPoint Real-Time Controller act as an OPC Server, and two, can the DSC Run-time engine be downloaded into the FP-20XX controller. The answer to both questions is no.
The FieldPoint RT modules are running a Real-Time OS, they are not running any version of Microsoft Windows. The OPC Specification is based upon Microsoft's DCOM model which is built into Microsoft Operating Systems. This does not exist in the built-in OS and thus the FieldPoint unit can not be an OPC Server. However, a host PC running Windows can have an OPC Server on it that in turn publishes all of the data from the FP-20XX module.
Can the DSC run-time be loaded into a FP-20XX? No, it was never designed for it and would not fit in the mod
ule.
Regards,
Aaron

Can not run application on Windows

What's wrong with my windows system.
I compile the java files in linux and put the class file to the windows system. But the class file can't run correctly. The error is following:
Exception in thread "main" java.lang.NullPointerException
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at javax.swing.JFrame.<init>(Unknown Source)
at FrameTest.<init>(FrameTest.java:10)
at FrameTest.main(FrameTest.java:17)
the FrameTest.java is following:
import java.util.*;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class FrameTest extends JFrame
public FrameTest()
super( "test" );
add( new JPanel() );
public static void main( String[] argv )
JFrame f = new FrameTest();
f.setSize( 400, 400 );
f.setVisible( true );
the version of JDK is 1.6.0b2 on linux
the version of JRE is 1.6.0b2 on windows
But if I compile the java file in windows, then it run ok on windows and linux.
Also the class file can run onther windows system.
I want to know what wrong with my windows system and how to find the solution.
thanks

Well I can see a problem, though I don't know
why you should get the symptoms you are getting. You
shouldn't be adding components directly to a JFrame,
you should add them to the content pane
(getContentPane().add(..) )That was changed in JDK 1.5. It's now ok to add directly to the component.
Kaj

Can not run multiple firefox windows with version 4

After the upgrade to FF4 the problem started happening. In ver 3 I used the profile manager and was able to run 2 firefox windows at the same time with no problems in Windows 7.
Now when I try to do this with version 4, one firefox window errors out with 'firefox stopped working'
I thought it was due to an incompatible add on or something, so I did a complete program removal, rebooted, cleaned the registry and removed all folders that firefox put on my system. The problem continues.

You can only run multiple version at the same time if the next version is started with the -no-remote switch added to the command line in the desktop shortcut.
"C:\Program Files\Mozilla Firefox XX\firefox.exe" -no-remote -P
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

How can I run java in Window XP?

Hi, all;
Since MS didn't support JVM in window XP, do anyone have any idea to run java in Window XP? Thanks for helps.

Hi, all;
Since MS didn't support JVM in window XP, do
, do anyone have any idea to run java in Window XP?
Thanks for helps.The MS version of Java was not up to date, and for most purposes (like using in Java 2 technology) you have had to download a Sun or IBM JVM anyway. The fact that Microsoft doesn't have a JVM is fine with me save the lack of a JVM in IE 6.x.
Chuck

Can i run labview on Windows CE or embedded XP?

Similar Messages

Maybe you are looking for