Can I run two big external monitors on my 2012 MacBook Pro?

I understand that my NON-retina 2012 MBP can be set up to drive two Apple Thunderbolt Displays, but am I out of luck on driving two generic 27" DVI or HDMI external monitors?
Boring details: I've just bought a mid-2012 MBP, with a quad-core i7 and 16 Gb of RAM plus the high-end GPU w/ 1GB of video RAM, but non-retina. I'd like to run two external 1080p or DVI HD-equivalent monitors (I have several new Samsung 27-inchers). I can live without the laptop 15-inch screen while I'm doing it!
I know that the retina MBP has two Thunderbolt ports, plus a DVI port, which would have easily given me what I need. However, I didn't get the retina MBP because it's totally non-upgradable by a user. There were a couple of other potential additional issues, including some reported problems installing Windows into Parallels via external DVD player. There's also the $mid-3000's price for retina, tricked out the way I'd like... Tradeoffs! At least I still have Firewire.
The two big externals help a lot with video editing. Even with my old G5 PowerMac, you could immediately drive two 1080p-equivalent displays. I expect that someone will release a much-more powerful solution than the Matrox USB 2 screen driver dongle, etc., sometime soon, using "superfast" USB 3, but I'll lose one of my two USB 3 ports; I'll want to have 'em both free for other externals, I'm sure.
Thoughts and/or solutions?

For those following this thread...
There is a posting elsewhere here in Discussions that describes how to get two large external monitors running on a recent Macbook Pro by using only ONE Apple Thunderbolt Display, then daisychaining a LaCie Thunderbolt drive after the T-Bolt display, and this allows adding another large DVI display in the chain after the LaCie.
Still pricey, since it does involve buying one Apple Thunderbolt Display, plus a LaCie drive, and cables, plus the DVI display, but it's around half a thousand dollars cheaper than two Apple T-Bolt displays, plus you have a very fast LaCie external drive.
Still not what I'm looking for, but if you're interested, here's a link...
    https://discussions.apple.com/message/18391941#18391941

Similar Messages

  • Can I run windows XP 64 bit on my 2012 MacBook Pro 13 inch

    I want to run windows but I'm not positive I can run XP on my 13 inch 2012 MacBook Pro

    You can not, buy Windows 7 instead.

  • Can I run two thunderbolt display monitors off of my new 27" iMac?

    Can I run two thunderbolt display monitors off of my new 27" iMac?

    Yes, the new iMac has two Thunderbolt ports. Plus Thunderbolt can be daisy chained thru external Thunderbolt drives and displays that have multiple ports.
    For more info, see >  Apple - Thunderbolt: Next-generation high-speed I/O technology.
    Although I'm not sure exactlly what Arrangement selections you will be offered in the Displays Preference, because I have not tested that setup myself...

  • My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work.  Any suggestions?

    My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work.  Any suggestions?

    Never mind.  Sorry.  It fixed itself.

  • Can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.

    can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.

    Not without using a VM. XP is no longer supported in Boot Camp or on newer Apple computers.

  • Can I download Pages for free onto my late 2012 macbook pro

    Can I download Pages for free onto my late 2012 Macbook Pro with retina display and 8 gb of memory.  The machine is running Yosemite Versus 10.10.1. 

    Pages is free for those that have purchased a new Mac. If you have never owned Pages before, then it is a purchase product for you. I suggest you look at the product reviews in the App Store, before you rush to purchase it. It is not a Word clone either.

  • How can I split an external monitor's screen on MacBook Pro

    I have a MacBook Pro with TWO external monitors.  When maximizing a program on one of the external monitors it expands across BOTH screens. When I do the same thing on my Windows 7 system the program is contained to the monitor it is being displayed on. (Pretty smart of that PC to know which monitor I'm working on!) So HOW can I get the Mac to do the same thing? Is there a 3rd party utility that can identify multiple monitors?  I'm using a Matrix DualHead2Go to connect the two external montors to the Mini-DVI port on the Mac.
    Thanks!!

    I'm using a Matrix DualHead2Go to connect the two external montors to the Mini-DVI port on the Mac
    The behavior you describe in Windows is exactly how much multiple display system works but I have two graphics cards capable of driving two displays each. I believe you have identified the problem in the above sentence. I believe that the Mac sees the Matrix device as a single display and not the two displays themselves. With the two external monitors attached, open System Preferences and select the Displays tab. If the Mac OS sees the displays as two separate displays you should see a dialog in each of the monitors and on your MacBook Pro. If I am correct you won't see three display dialogs, you'll only see two, one on the Mac and one on one of the two external displays.

  • External monitor slowing down my MacBook pro

    I recently hooked up a brand new external Acer G205HV monitor to my 15" MacBook Pro (4gb RAM) using the mini display port to DVI adapter from Apple. I have an GeForce 9400M graphics card with 256mb ram. Whenever I have the monitor plugged in it slows down my computer tremendously. When I do not use the monitor, my laptop is back to being lightening fast.
    Expose` and the dashboard lag a ton, and basically the internet craps out. I can barely load websites and streaming video has become virtually impossible. I have tried running with the laptop open and in clam mode. Same result. At first I thought I had a virus, which would be very very rare, but after using the laptop without the monitor I realized that the monitor was slowing me down.
    The max resolution that I am running the monitor at is 1600x900 @60Hz. The DVI adapter is supposed to support a much higher resolution than this. Is my graphics card the issue? Any help is appreciated. thanks!

    I have the same problem with a spring 2008 MacBook (4,1) with 4 GB RAM running 10.5.8. Using a DVI external monitor, the wireless speed drops by at least half and usually more. This is the case whether using a Samsung 2443 BW at home or a Dell at work. I've tried different DVI cables, changing channels from 11 to 1, no difference.
    Took it to the local Apple store where they had only a VGA monitor to test with and, strangely, the wireless was unaffected. It was a small ACER monitor, a 15-inch or so, not wide-screen. Have had no other opportunities to try a VGA monitor, as I don't have a mini-DVI to VGA adapter.
    But I wonder if there's something there?
    Don

  • HT5219 Can some one please help me clarify if I can set up two thunderbolts as split screens to my Macbook pro 15" (October 2011)? Thanks

    There is a lot of different answers to this on the internet but all different. The Luxembourg Apple retailers are not able to give a real answer either.
    Please don't answer too technical as I am no IT expert.
    Thanks
    Casper

    The table below indicates how many Thunderbolt displays can be connected to Thunderbolt-capable Mac computers in OS X.
    Computer
    Maximum number of connected displays
    Thunderbolt-capable Macs with only Intel HD Graphics 3000 integrated graphics can support one connected Apple Thunderbolt Display (27-inch).
    MacBook Air (Mid 2011)
    MacBook Pro (13-inch, Early 2011) and (13-inch, Late 2011)1
    Mac mini (Mid 2011), 2.3 GHz
    Mac mini with Lion Server (Mid 2011)
    One Thunderbolt display
    Thunderbolt-capable Macs that can support up to two connected Apple Thunderbolt Displays.
    MacBook Pro (Retina, Mid 2012)4
    MacBook Pro (13-inch, Mid 2012)
    MacBook Pro (15-inch and 17-inch, Early 2011) and later
    MacBook Air (Mid 2012)
    iMac (Mid 2011)2
    Mac mini (Mid 2011), 2.5 GHz3
    Two Thunderbolt displays

  • Two external monitors + ethernet on the Macbook Pro Retina (late 2013)

    The new MacBook Pro 13" retina have 2 thunderbolt connectors and one HDMI but no ethernet port (how pro is that?).
    As the title of this post suggest, I want to drive two external monitors as well as an ethernet port.
    1.) Is there a dock that woudl allow such setup out of the box?
    -OR-
    2.) Using the Macbook Pro's two thunderbolt ports and the following adapters:
    - Thunderbolt to Gigabit Ethernet,
    - Mini DisplayPort to DVI (is this actually thunderbolt compat?).
    Can once of the thunderbolt connector be splitted or chanied to drive etiher: two screens or one screen + ethernet?
    Or would I also need to use the HDMI port in such case? If so is there any performance difference between the Macbook Pro's HDMI port and the thunderbolt ports? Can all these be run concurrently i.e. thunderbolt display and the HDMI port?
    The monitors both have DVI-D connectors.

    Thunderbolt expansion docks are beginning to appear.  "They ain't cheap."   This one would support what you want to do ... Belkin Express Dock  (using both Thunderbolt ports on your MBP)
    Thunderbolt devices can be daisy-chained however I don't believe that means it will support 2 displays on the same chain.
    miniDisplayPort and Thunderbolt are co-compatible.   You can plug a miniDisplayPort cable into the Thunderbolt port in order to connect a display.
    DVI and HDMI are co-compatible.  You should only need an appropriate cable to connect the display to the MBP's HDMI port.

  • How can I use my Late 2009 iMac as an external monitor with my new MacBook Pro 15" Retina

    I want to use my iMac (Late 2009) as an external Display for my new 15" MacBook Pro Retina, I need to know what Cables to use so I can go buy them the Apple Store, I already tried a thunderbolt cable between the two and that doesn't work, but I think this might
              iMAC                                                                                 MBP 15" Retina
    Mini display Port to VGA adaptor -> VGA Cable -> Mini Display Cable to VGA adaptor
    or maybe
    Mini Display port to HDMI adaptor -> HDMI Cable -> HDMI Port on MBP
    Pleae help I can't seem to figure it out online.
    Thanks!

    Hello, All-
    I too am very interested in the answer to this query. Same set up, same fail w/the Thunderbolt cable. The Genius Bar at the Apple Store was no help & recommended I bring my 27" iMac into the store...seriously? Their ultimate answer was that I needed a plain old male-male mini display port cable....that the Thunderbolt cable was the problem. Bloody unlikely, I say. Another guy in the store agreed with me this morning, so swapped out the cable. I was hoping upon hope it was a bad cable, but no such luck—still nothing. Next I tried a mini-display-port-to-DVI adapter—DVI cable—mini-display-port-to-DVI adapter. This also did not work. Is there a chance that the iMac running Snow Leopard and the MacBook running Mountain Lion is the problem???

  • Can I hook 2 external monitors to a new Macbook Pro?  If so what do I need?

    I am purchasing a new macbook pro 15 inch.  I would like to hook it to 2 external monitors with the laptop closed.  Is this possible? And what hardware would I need? Thanks

    Sorry forgot to mention that the external monitors are not apple products.

  • New External Monitor for Logic on MacBook Pro - Suggestions

    I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
    I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
    I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
    I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
    It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
    And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
    So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
    It's expensive. Very expensive.
    Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
    Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
    Oh and did I mention that it's expensive? Jeez.
    The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
    And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
    I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
    So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
    My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
    Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
    Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
    I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
    Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
    The candidates right now are
    Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
    Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
    ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
    There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
    Any input here would be greatly appreciated.

    No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
    Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
    And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
    So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
    I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
    So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
    Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
    Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip.

  • External monitor goes black when macbook pro has magsafe connected

    Hi,
    I have bought an external monitor about 1 week ago, and I have it connected with a minidisplay to dvi cable, and a dvi cable to the monitor.
    It was working OK -well, it had some sudden flash to black screen that lasted about 1 second, but nothing else- until thir morning when it just started showing a black screen. Mac OS sees the monitor, and I can move windows over there, etc. It's "alive". But I only see a black screen on the monitor.
    I tested with other computer, and it works OK. The cables work too.
    What I discovered is that if I unplug the power adaptor from the MBP the monitor screen shows correctly.
    It works OK only if the magsafe adaptor is unplugged from the MBP, it doesn't care if the magsafe adaptor is plugged to the power or not; only if it's connected to the mac book pro.
    It seems like some magnet stuff is making a mess there. What could it be? I can't work on the monitor only in battery power...
    I tried resetting nvram and the other stuffs that I found here, but nothing works.
    Thanks!
    Javyer

    Hi javyer!
    Here is an article that explains the troubleshooting for this issue in more detail:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • External monitor loses signal to macbook pro through DVI cable and Mini DisplayPort Adapter

    Hello,
    So I had my external monitor connected to my MBP with a DVI cable and a Mini DisplayPort Adapter, for a while already. But sometimes, the monitor would lose signal from the laptop and gives me a white noise screen. Now, the monitor can't receive signal at all, even after I got a new Mini Displayport Adapter. When the monitor and the MBP is connected by the cable and the adapter, the monitor would say "no signal" and the MBP screen would flicker (I think it's trying to connect to the monitor, but can't). The new Mini Display Port Adapter also makes the screen flicker, so I'm not sure if it's the problem is at the adapter or the DVI cable. I'm pretty sure it's not the monitor.
    What do you think? Have you ever have a screen flickering problem when your MBP is connected to an external monitor?

    I have had the same problem.  By following your suggestions I got to arrangements.  I could not send them off to the side.  When I hit the mirro disply key everyting worked.  I got it solved by clicking in arrangements and setting displays to mirror display.
    I am still have a problem of no sound coming through my tv.
    Rolland

Maybe you are looking for