Can I run two instances of TN3270 server on 7204?

I have a 7204vxr router with two CPA cards. Each one connects to a different mainframe, and I would like to run the TN3270 server on each of my CPA's. Is this allowed? I have an active PU in VTAM on both systems, but cannot open a session on the second instance of the TN3270 server.

Thanks for the reply Dan...
LU's are hard coded, can ping the gateway/PU no problem... I get a "socket message not tapped - 28360 " error with my TN3270E client (Hummingbird) when trying to establish a session. No bind errors in VTAM or anything like that, and no error's in the router log with al the channel debug on. I have not had the time to look at this in as much detail as I would like to, but I'll get there.. Again, thanks for your input and I'll update this as soon as I have some more info...

Similar Messages

Can we run two instances of solaris in 1 hardware (SunFire Server)

Hi,
There is a need for us to run two instance of Solaris in SunFire Server.
Because we need to install Domino Servers in a Single Hardware.
The hardware consist of Eight Processors.
How to allocate the resource in such a way that the Domino Server should take 4 Processor and other application should take other four.
Please be in more detail.
Regards,
C.Kumanan

"Sunfire" is a product line that includes many different computer designs
and many different capabilities. You will need to be more specific as to what model you actually have.
The Sun Fire Midrange Systems are hardware designs that can be configured
to run discrete domains in the same overall chassis.
So, for those systems the answer to your question would be "Yes".
For any Sun Fire computer syustem that is smaller than the Midrange systems,
the answer to your question would be "No".
So ... A Sun Fire 3800 with eight processors ??? "Yes"
However, a Sunfire V880 with eight processors ??? "No"
Any other configuration questions of the actual Solaris instance,
such as Zones or processor thread affinity are outside the scope of this forum.
Those issues would be discussed better in an OS forum.

How can I run two instances of apache tomcat in the same machine.

Hi
Can I run 2 instances of apache tomcat in the same machine.If yes then how.?

Yes, you can. Just run 2 instances. Make sure that they run on different ports.

How to run two instances of weblogic server as an NT service on the same machine

I have to have two instances, one I want to use it for development(testing
purposes) and the other one I need to use it as a live one(Production)
So that I can test my applications independently without disturbing the live
application.
Thanks
Madhu

I can start one instance as an NT service, but the other instance, I have to
start with the command. I need to run as an NT service because I need to
use NTRealm
Security
I have created a new domain , server listening to different port.
Thanks
madhu
Bruce Blackshaw <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3c0d2b66$[email protected]>...
I have to have two instances, one I want to use it fordevelopment(testing
purposes) and the other one I need to use it as a live one(Production)
So that I can test my applications independently without disturbing thelive
application.I would not recommend having development and production on the same
machine.
But if you wish to do so, you can create multiple domains under the
same installation, say one for dev and one for prod. On the same
machine make sure they listen on different ports. This, of course,
ties you to the same version for development and production - making
it impossible to upgrade just one.
You may be able to do two completely different installations (i.e.
different BEA HOMEs) on the same machine - I haven't tried this but it
looks possible. This would mean you could upgrade each separately. The
presence of BEAHOMELIST in the registry on NT seems to indicate this
should work.
Bruce Blackshaw
Free Java FTP Library
http://www.enterprisedt.com/downloads/ftp.html

Running two instances of Windows Server 2012 Essentials R2 on the same domain

We have Windows Server 2012 Essentials R2 running as a domain controller -- and have installed another licensed copy of the same thing on the same domain. We want to use the 2nd server for running an LOB application and provide backup for the
AD services.
The 2nd server is a member of the domain. Can I do this and have the 2nd server provide AD failover services like they do with 2012 Standard?

Two things to consider. In the XP and 2003 era, the OS was not written in a security-first fashion. While XP did have LUA, almost nobody used them. Then came Vista and UAC, and those prompts were a major pain point because nobody wrote for security. Fast
forward 6 years and standard accounts are a normal best practice. Almost nobody in business recommends running daily tasks as administrator.
I mention all this to illustrate that, similar to admin accounts, what you used to get away with no longer applies. Running LOB apps on a DC is just bad. Many times, the app just doesn't work. But even if you could get it to work, it is a terrible idea.
If the stories of Home Depot, Target, and most recently Sony don't already give it away, I'll spell it out. We no longer live in an age where you can take shortcuts and expect to be safe. Large organizations make national news when they screw up. But small
businesses are targeted just as often and are at just as much risk. From "leaking" their client info to having their data held for ransom, the small business is abused regularly, but never makes national news because they are, by definition, small.
If you can take simple easy steps to help minimize that risk, such as keeping a domain controller free of other software and locked down, then it is almost unethical to do Otherwise in the modern computing era. The world ha changed. It is our responsibility
as I.T professionals to change with it. That's why we get to call ourselves "professionals" in relation to I.T.
So, what bad things? Risking the customer's very livelihood. I consider that pretty darn bad.

Can I run two instances of mail at the same time?

To avoid accidentally sending an email from the wrong account, I want to use an email program (that can access an Exchange account) "dedicated" to just that account. To do this, I think have to use either Mail or Outlook. I don't have Outlook, and use Mail for my other accounts.
So, can I duplicate the Mail program (on another of the internal drives if that would help) and use it exclusively for this one account or would it screw everything up?

In that case the only other way I know you can do it is to set up an alternative user account on the mac, which will give you two separate instances of Mail (the one you already have and a new one in the new user account).
To do that, go here
 > System Preferences... > Users & Groups
and create a new user by first clicking the padlock at the bottom, entering your password, and then clicking the '+' button just above the padlock. Fill out the account details and enable 'fast switching' in the options so you can easily switch between the two mac user accounts.
Log in to the new user's account and create the work email account in Mail.

How can I run two instances of Firefox: one in Safe Mode and another in Normal Mode?

I think my question says it all.

You can't simultaneously run a normal instance and a Safe Mode instance using the same profile. So step one is to create a new profile.
* [[Use the Profile Manager to create and remove Firefox profiles]]
Right-click the desktop and choose New, then Shortcut. As the location of the item, use the following, substituting the placeholder profile name with the actual profile name you chose earlier.
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -no-remote -p NameOfTheProfile
* https://developer.mozilla.org/docs/Mozilla/Command_Line_Options

Running Multiple Instance of indesign server using com calls

Hello All,
I am new to this community , can anyone help me in understanding how can i run multiple instance of indesign server using com calls.. i am using jacob library in java for com calls ..
Thanks

Hi Soni,
Web colsole --> your domain --> your server --> configuration -->
general --> Listen Port / Listen Address
Regards,
Slava Imeshev
"Soni " <[email protected]> wrote in message
news:3dcfbbcb$[email protected]..
>
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 onsame the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
Soni

Can we have two instance of OHS running in a box

Can we have two instance of OHS running in a box with single installation of OHS server.
Something like running multiple apache instance with using different conf file for each.
-Ram

It is true that creating more than one instances of OHS out of one set of binaries (install) is NOT supported by Oracle. But is it possible if you don't care about what's supported by Oracle? You betcha! Yes it is possible (even in 10.1.2 and 10.1.3 OHS) to create and run more than one instances of OHS out of one install.
This is basic Apache concept which Oracle does not disable. But I would again mention, this is something Oracle does not support. How would you achieve this? There is planty of information on internet, google can be your friend:
http://lmgtfy.com/?q=run+multiple+apache+instances
If you do this route, note that not just httpd.conf, you will also need to make another copy of dms.conf and ssl.conf. And if you want to have this another instance of OHS managed by opmnctl, you will also have to duplicate (with necessary changes) the section in opmn.conf about HTTP_Server too.
Hope this helps.
Thanks
Shail

Can't run multiple instances on same page!

Hi,
Since I got no response on the shadowbox forums after 2 weeks, I thought it's worth to post it here and hope someone can help me out.
Note: This is also related on non-joomla pages. I've tested it on plain html as well (by Dreamweaver) and get the same issue.
The following issue was posted by me on the shadowbox forums:
I was wondering if the following is possible.
I've tried almost everything where I can think of, but no luck.
Searched many forums and googled a lot, but without success.
I got feeling that I'm so close and missing some simple solution.
So I'm stuck here, I'm not able to figure it out.
This is what I want to achieve:
My website is running on Joomla 1.5. And I'm using a Shadowbox extension.
In an article I've put multiple SWF movies, like previews acting like buttons.
So when clicking on a SWF button/movie, Shadowbox opens and plays a related FLV movie.
To achieve this part I've followed the instructions at this site under FAQ > first paragraph.
So far so good...
Now the ugly thing is when putting multiple swf buttons on a single page, after clicking a random button Shadowbox always displays the same flv movie. I did some altering with ID's and such but had no luck.
Even try to alter with the Shadowbox options and variables, flashVars and such (at this site under Options and Usage) but that worked out for me.
The strange thing is when placing the buttons, let's say in an article belonging to a section and category and make the articles paginated, after clicking the swf button the related flv plays. Browsing to the next page and clicking the button, the related flv will play also. This is the way it should be. Unfortunately it doesn't work when multiple buttons are displayed on the frontpage or an single article regardless whether they belong to sections and categories or not.
Even when a single code is placed in a single article and display 2 or more articles containg a different swf and a different related flv link only the last added flv plays with every random swf button/movie.
This the code I'm using for each swf (actionscript behavior):
FIRST INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/cqmm_test.flv','flv','title')");
SECOND INSTANCE SWF=====================================
on (release) {
getURL("javascript:openShadowbox
('http://test.cquence-multimedia.nl/images/WizardFinal_1.flv','flv','title')");
================================================
This is the code I'm using in the article (2 instances on a single page):
=======================================================

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button.swf">
<param name="movie" value="images/default_swf_button.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> 
<param name="expressinstall" value="Scripts/expressInstall.swf" />  
<object width="150" height="50" data="images/default_swf_button.swf" type="application/x-shockwave-flash">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> 
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>

</object>
</p>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
<script type="text/javascript">
function openShadowbox(content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/cqmm_test.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST FLV",
width:"800px",
height:"600px",
</script>

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<object id="FlashID1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="150" height="50" data="images/default_swf_button2.swf">
<param name="movie" value="images/default_swf_button2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" /> 
<param name="expressinstall" value="Scripts/expressInstall.swf" />  
<object width="150" height="50" data="images/default_swf_button2.swf" type="application/x-shockwave-flash">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" /> 
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" border="0" alt="Get Adobe Flash player" width="112" height="33" /></a>
</div>

</object>

</object>
<script type="text/javascript">
swfobject.registerObject("FlashID1");
</script>
<script type="text/javascript">
function openShadowbox (content, player, title, width, height, options){
Shadowbox.open({
content:"http://test.cquence-multimedia.nl/images/WizardFinal_1.flv",
player:"flv",
title:"SHADOWBOX FLASHBUTTON TEST BRIAN",
width:"800px",
height:"600px",
</script>
=======================================================
This is the link to the page in question:
http://test.cquence-multimedia.nl/index.php?option=com_content&view=article&id=9&Itemid=13
Please, any suggestions would be great!
Thanks in advance.
Best Regards,
John.

Sorry...I still don't get it. What is it about Windows FUS that keeps iTunes from running running the process twice? It can run many other non-Apple windows apps in multiple user sessions (commercial apps, open source apps, audio/video apps, networked apps). I can even run two different virtual machines at the same time under two different user sessions.
Why can iTunesHelper.exe run twice but iTunes.exe cannot? Why can I run Safari at the same time? Quicktime Player runs fine under multiple user sessions.
Blaming it on Windows and/or FUS sounds like FUD. Can anyone give a valid technical reason? Semaphores? Mutexes? An admission (and explanation) that the Windows version is purposely crippled?

How to install two instance on one server

Dear Guru,
I want to install two instance on one server.
I have installed IDES server ( win 2k3 64 bit with SQL 2005 ECC 6.0)
Drive is
c: 20 GB for os
d: 5 gb swap
e: 5 gb swap
f: 450 GB database.
The same server i want to installed SOLMAN 4.0 with sql 2005.
Please suggest me how to installed without affcting IDES server.
Amol

Hi,
You only have to consider 2 things :
1. SAPTRANSHOST entry in hosts file will be the same for both systems
this mean that both systems will share the same transport directory
Regards,
Wojtek
This is not true. Your SAPTRANSHOST will remain the same, but you can (and should) specify independent trans directories with the DIR_TRANS and and EPS profile parameters to designate where the instance trans files should be located (i.e. /usr/sap/trans_SID). I recommend you make this change in the existing host first, and then clear out the trans directory. Let the 2nd instance install into it and then alter that one too (thereby moving the files to the new /usr/sap/trans_SID2).
Edited by: David Ingersoll on Jan 31, 2008 3:12 PM

Run two Database in single server

Hi...
I want to run two database into single server. For that I had created one another database.
But now I am not able to connect with two database at the same time.
When I am going to connect to another database i have to shutdown the first one.
Is it possible to connect and work on two database at the same time?
Thanks
pratik

You should have a good enough to have two or more instances running on the same machine.
The performance of a single instnace will always be better compared to having two or more instances on the same machine.
Is it possible to connect and work on two database at the same time?Yes
Here is an example
$ ps -ef |grep pmon
ora101AS 548928 1 0 Aug 06 - 0:31 ora_pmon_orcl
ora102DB 552974 1 0 Aug 06 - 0:36 ora_pmon_TEST
ora102DB 1380412 1 0 00:58:49 - 0:04 ora_pmon_LIVE
testuser 1613946 1691868 0 10:46:11 pts/2 0:00 grep pmon
Single machine having multiple instances
$ ps -ef |grep pmon
ora102DB 4086 1 0 Aug 06 - 1:39 ora_pmon_LIVE10
testuser 32848 31172 0 10:46:24 pts/0 0:00 grep pmon
Single machine having a single instance
The second machine performance is much better compared to the first machine that has mutiple instances.
Normally CREATE DATABASE is used by advance users while DBCA is relatively easy to use.
Adith

How to start two instances of InDesign server independently?

Hello,
we have a multi instance InDesign server installation.
And we are able to start two instances of InDesign server on different ports.
But now we would like to use different plugins for different instances.
Is it possible somehow? For example install InDesign server two times in different folders or something like that?
Thank you in advance.

InDesign plugin loading can be controlled via a file "PluginConfig.txt", refer to search for details.
InDesign Server has separate configuration folders per instance/configuration.
*If* the search path for the PluginConfig.txt falls into this folder, that would be the easiest approach.
I don't have a server installation with me to try it out.
Dirk

Can I run two DSL lines into my airport network?

I have a 1.5M line from Qwest and can not get faster speed from anyoe else in my semi-rural community. Can I run two 1.5 DSL lines into one or two airport extremes and get the equivalent of a 3.0 line?

If I have two DSL lines each connected to its own Actiontec modem with each modem connected via ethernet to its own airport extreme then it sounds like I need to have two wireless networks to take advantage of the second DSL connection. Correct? We have a lot of computers being used in the household so could put the kids on their own network.
Apparently the airport extreme can not manage a network with two internet connections even if they are connected via separate airport extremes? I have worked at companies that have done this for internet connection redundancy purposes so there must be devices that can handle this.
Message was edited by: David in Colorado
Message was edited by: David in Colorado

Can I run two thunderbolt display monitors off of my new 27" iMac?

Can I run two thunderbolt display monitors off of my new 27" iMac?

Yes, the new iMac has two Thunderbolt ports. Plus Thunderbolt can be daisy chained thru external Thunderbolt drives and displays that have multiple ports.
For more info, see > Apple - Thunderbolt: Next-generation high-speed I/O technology.
Although I'm not sure exactlly what Arrangement selections you will be offered in the Displays Preference, because I have not tested that setup myself...

Can I run two instances of TN3270 server on 7204?

Similar Messages

Maybe you are looking for