Can I see on my hd tv the movies I've downloaded on my Imac?

hi there, I'm trying to see my movies on my hd tv instead of my imac, but I don't want to install a cable, too long (5 meter no obstacles) and ugly. I have an 2007 Imac and the wifi router is about 20cm from the computer. Any suggestions?
Thanks a lot
P.

Welcome to the Apple Community.
This is exactly what the Apple TV is for. The device sits under your TV and will wireless stream content from your mac via your router, providing the content is in a compatible format and is indexed in iTunes.
Consider moving your router further away from your computer, close is good but too close can be problematic.

Similar Messages

HT1390 I just rented a movie on itunes but I don't know how to make it play. I clicked out of itunes and now when I go back into itunes, I don't see a way to play the movie I just downloaded. Help.

I am a new at this. I just rented and downloaded a movie, clicked out of iturnes and now when I go back into itunes, I don't see a way to play the movie that I just downloaded ten minutes ago. I just want to watch it on my laptop.
Help.

Welcome to the Apple Community Vane_paranormal.
If you rent a movie on your phone, you have to watch it on your phone, likewise if you rent it from the Apple TV you will have to watch it there.
If you want to watch a rental on multiple devices, rent it from a computer.

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Why can i see only one picture in the illustration windows with iTunes 10.5.1?

why can i see only one picture in the illustration windows since iTunes 10.5.1?

Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
I've developed a quick workaround, and am still hoping Apple will fix this!
Go To Get Info on the tune you want to see secondary artwork for.
Go To the Artwork tab
Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
you end up with a lot of jpgs on the desktop to discard!

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

In iMovie, I can't see my iPhoto videos in the event library. Why ? this is after updating to 10.7.4

in iMovie, I can’t see my iPhoto videos in the event library. Why ? this is after updating to 10.7.4
also, if I want to use a picture in my movie, it says 'Open iPhoto to see photos from your iPhoto Library in this list.'
It never use to do this.

JimHdk,
thanks for your reply, but why I could wtach the videos on land mode using the ios 6 and why I can't watch them using this new ios 7 on land mode?
i give you the name of the videos : BJJ OPEN GRD, BJJ THROWS 1, BJJ THROWS 2, BJJ ChoKes, BJJ SWEEPS,
I work with this, I study watching the videos, and please, I need to resolve this,
thanks JimHdk for you help and cooperation

Since upgrading to windows 8.1 I can not see any local files in the files window.

I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
If I change sites under local view get error thet dreamweaver can not update cache

Thanks Nancy
It certainly worked in windows 8.
I have deactivated and am trying to reload software inside of windows 8.1.
Will let you know.
Thanks again
Terry
Date: Fri, 1 Nov 2013 12:13:57 -0700
From: [email protected]
To: [email protected]
Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
    Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
    created by Nancy O. in Dreamweaver support forum - View the full discussion
I honestly don't know if DW CS5 is compatible with Win 8.1. The OS compatibility FAQ only mentions DW CS6 & CC.
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
Maybe someone else can shed more light on this.
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

Why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

Hello. do you know why i can`t see my all my photos the streaming in my new i-phone? i have 815 and i just can see 175

Photo stream photos are only kept in photo stream for 30 days, although up to 1000 will remain on your device until you delete them. When you connect a new device to your photo stream it will only receive photos added in the last 30 days as the earlier photos are no longer there. Chances are, the missing photos were more than 30 days old.
If the missing photos are on another device, you could create a shared photo stream including the missing photos and invite yourself, as explained here: http://help.apple.com/icloud/#mmc0cd7e99. You would see then be able to access the photos on your new phone. Another option is to import them to your computer (see http://support.apple.com/kb/HT4083), then sync them to your new phone using iTunes.

After I updated to Yosemite I can't see my Iphoto library in the attachments window. When I select Media - Pictures only my Photo Booth Library Comes up

After I updated to Yosemite I can't see my Iphoto library in the attachments window. When I select Media ->Pictures only my Photo Booth Library Comes up

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can i see with a different size the letters and presentation of theRSA1

Hi gurus,
how can i see in a better size the windows of SAP BW, example RSA1, Business content, etc, now i got it too small i want to see it better, please step by step
thanks !

Hi,
in ur RSA1 session click on the customise local layout or press ALT+F12..
you will get a list of menu options..
click on font and change the font size and the font design to whichever u desire..
in the same customise local layout u can even change the color and do many other visual changes.
hope it was helpful..
Regards,
Kalpana

How can i see Approver (Reporting To) of the employee in HR

how can i see Approver (Reporting To) of the employee in HR
thanks.

Hi,
For what do you need this?
Can you explain it in more detailed manner?
Thanks
Abhijith H

Can I see on my hd tv the movies I've downloaded on my Imac?

Similar Messages

Maybe you are looking for