Can I see what number an iMessage is coming to?
I have iMessages for both my phone number and my daughter's phone number coming to my phone. Is there a way to tell when an iMessage comes in which number it was addressed to?
Thanks!
Note: to clip background, move the white point in using the point curve. whites slider is often recommended instead, but it tends to lift whites *without* too much clipping (soft roll-off). If you really want hard clipping - use the point curve:
Tip: turn on clipping indicator.
R
Similar Messages
-
How can i see what number and time a text message i received a text message
how can i see what number and at what time i received a text message online
If you are on a regular postpaid account, you can log in to your My Verizon account and see the usage details for your account.
-
Help: How can I see what number is dailed by the caller? (SPA504G & 2 different Sipgate accounts)
Hi,
I am Daniel and a complete newbee regarding VoIP and the SPA5xx phones in particular. I hope that one of the pros here can help me out...
My problem is that I cannot see if a caller is calling for number A or number B.
I have the following setup:
- Multiple sipgate accounts (one for company A and one for B) and tehreby 2 different numbers, too
- one Cisco SPA504G
I registered both accounts on the phone. I use Ext. 1 & 2 with Sipgate account A and Ext. 3 & 4 with Sipgate account B. I can call out using either account of A or B and caller ID is used from the respective account. So that works fine.
What I cannot make work is that I see if the caller is calling the number of account A or B. It always shows me on the phone that the user is calling for account A (also if the caller has dailed the number of account B).
Do you know how I could make that work?
Thanks a lot for your help in advance! It is very much appreciated...
DanielDo you have line key 1 and 2 mapped to ext 1 which is account A? Line key 3 and 4 mapped to ext 3 which is account B?
That would allow you to see calls to ext 1, flashing the line key 1 and 2 while calls to ext 3 would flash line key 3 and 4. -
Hi i've made an applet that has 12 buttons on it, and when the user presses 4 buttons it is stored in an array called myList. Each time a button is pressed sequenceCheck method i created gets called. This has a list of the possible correct combinations that the user could press the buttons in. I have 23 solutions so far. Most of them are working fine however any solution that has the button10, button11 or button 12 in it doesn't seem to work? And i'm not sure why? I've looked at the code over and over and can't see what i've done wrong.
Solutions that don't seem to work are: solution 3, solution 7, solution 8, solution 9, solution 11, solution 13, solution 16, solution 17, solution 18, solution 18, solution 19, solution 20, solution 22 and solution 23. Sll of which have ethier button 10, button 11 or button 12 in it?
If anyone can see what i've done it would really appreciate the help.
package stampGame;
// Description:
// Directory: c:\myjava\teaching
// Date: 5/4/00
// Uses:
// Comments: note the convenient use of the Point object for
// manipulating coordinates
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
import java.util.*;
import javax.swing.JOptionPane;
public class StampGame extends Applet implements ActionListener{
final int N= 12;
final int P = 3;
final int Q = 3;
String[] buttonLabel = {"1","2","3","4","5","6","7","8","9","10","11","12"};
Button[] button = new Button[N];
private int combinationsFound = 0;
ArrayList<String> myList = new ArrayList<String>();
ArrayList<String> solutionsFound = new ArrayList<String>();
public void init(){
setBackground(Color.blue); // Applet background color
setLayout(null);
System.out.println(myList);
for(int i=0; i<N; ++i)
button[i] = new Button(buttonLabel);
button[i].setFont(new java.awt.Font("Dialog", 1, 24));
button[i].setBackground(Color.white); // buttons colour
button[i].addActionListener(this);
add(button[i]);
public void paint (Graphics g){
Insets a = insets();
button[0].reshape(10+a.left,10+a.top, 100,100);
button[1].reshape(110+a.left,10+a.top, 100,100);
button[2].reshape(210+a.left,10+a.top, 100,100);
button[3].reshape(310+a.left,10+a.top, 100,100);
button[4].reshape(10+a.left,100+a.top, 100,100);
button[5].reshape(110+a.left,100+a.top, 100,100);
button[6].reshape(210+a.left,100+a.top, 100,100);
button[7].reshape(310+a.left,100+a.top, 100,100);
button[8].reshape(10+a.left,200+a.top, 100,100);
button[9].reshape(110+a.left,200+a.top, 100,100);
button[10].reshape(210+a.left,200+a.top, 100,100);
button[11].reshape(310+a.left,200+a.top, 100,100);
g.drawString("Number of combinations found: " + combinationsFound, 500, 100);
public void actionPerformed(ActionEvent e) {
// TODO Auto-generated method stub
if(e.getSource() == button[0]){
System.out.println("one");
myList.add("button1");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[1]){
System.out.println("two");
myList.add("button2");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[2]){
System.out.println("three");
myList.add("button3");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[3]){
System.out.println("four");
myList.add("button4");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[4]){
System.out.println("five");
myList.add("button5");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[5]){
System.out.println("six");
myList.add("button6");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[6]){
System.out.println("seven");
myList.add("button7");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[7]){
System.out.println("eight");
myList.add("button8");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[8]){
System.out.println("nine");
myList.add("button9");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[9]){
System.out.println("ten");
myList.add("button10");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[10]){
System.out.println("eleven");
myList.add("button11");
System.out.println(myList);
sequenceCheck();
if(e.getSource() == button[11]){
System.out.println("twelve");
myList.add("button12");
System.out.println(myList);
sequenceCheck();
public void sequenceCheck(){
//ArrayList<String> solutionsFound = new ArrayList<String>();
ArrayList<String> solution1 = new ArrayList<String>();
ArrayList<String> solution2 = new ArrayList<String>();
ArrayList<String> solution3 = new ArrayList<String>();
ArrayList<String> solution4 = new ArrayList<String>();
ArrayList<String> solution5 = new ArrayList<String>();
ArrayList<String> solution6 = new ArrayList<String>();
ArrayList<String> solution7 = new ArrayList<String>();
ArrayList<String> solution8 = new ArrayList<String>();
ArrayList<String> solution9 = new ArrayList<String>();
ArrayList<String> solution10 = new ArrayList<String>();
ArrayList<String> solution11 = new ArrayList<String>();
ArrayList<String> solution12 = new ArrayList<String>();
ArrayList<String> solution13 = new ArrayList<String>();
ArrayList<String> solution14 = new ArrayList<String>();
ArrayList<String> solution15 = new ArrayList<String>();
ArrayList<String> solution16 = new ArrayList<String>();
ArrayList<String> solution17 = new ArrayList<String>();
ArrayList<String> solution18 = new ArrayList<String>();
ArrayList<String> solution19 = new ArrayList<String>();
ArrayList<String> solution20 = new ArrayList<String>();
ArrayList<String> solution21 = new ArrayList<String>();
ArrayList<String> solution22 = new ArrayList<String>();
ArrayList<String> solution23 = new ArrayList<String>();
Collections.sort(myList);
// SOLUTION ONE
solution1.add("button1");
solution1.add("button2");
solution1.add("button3");
solution1.add("button4");
System.out.println("Solution 1 = " + solution1);
// SOLUTION 2
solution2.add("button5");
solution2.add("button6");
solution2.add("button7");
solution2.add("button8");
System.out.println("Solution2 = " + solution2);
// SOLUTION 3
solution3.add("button9");
solution3.add("button10");
solution3.add("button11");
solution3.add("button12");
System.out.println("Solution3 = " + solution3);
// SOLUTION 4
solution4.add("button1");
solution4.add("button2");
solution4.add("button5");
solution4.add("button6");
System.out.println("Solution4 = " + solution4);
// SOLUTION 5
solution5.add("button3");
solution5.add("button4");
solution5.add("button7");
solution5.add("button8");
System.out.println("Solution5 = " + solution5);
// SOLUTION 6
solution6.add("button2");
solution6.add("button3");
solution6.add("button6");
solution6.add("button7");
System.out.println("Solution6 = " + solution6);
// SOLUTION 7
solution7.add("button5");
solution7.add("button6");
solution7.add("button9");
solution7.add("button10");
System.out.println("Solution7 = " + solution7);
// SOLUTION 8
solution8.add("button7");
solution8.add("button8");
solution8.add("button11");
solution8.add("button12");
System.out.println("Solution8 = " + solution8);
// SOLUTION 9
solution9.add("button6");
solution9.add("button7");
solution9.add("button10");
solution9.add("button11");
System.out.println("Solution9 = " + solution9);
// SOLUTION 10
solution10.add("button1");
solution10.add("button2");
solution10.add("button6");
solution10.add("button7");
System.out.println("Solution10 = " + solution10);
// SOLUTION 11
solution11.add("button5");
solution11.add("button6");
solution11.add("button10");
solution11.add("button11");
System.out.println("Solution11 = " + solution11);
// SOLUTION 12
solution12.add("button2");
solution12.add("button3");
solution12.add("button7");
solution12.add("button8");
System.out.println("Solution12 = " + solution12);
// SOLUTION 13
solution13.add("button6");
solution13.add("button7");
solution13.add("button11");
solution13.add("button12");
System.out.println("Solution13 = " + solution13);
// SOLUTION 14
solution14.add("button2");
solution14.add("button3");
solution14.add("button5");
solution14.add("button6");
System.out.println("Solution14 = " + solution14);
// SOLUTION 15
solution15.add("button3");
solution15.add("button4");
solution15.add("button6");
solution15.add("button7");
System.out.println("Solution15 = " + solution15);
// SOLUTION 16
solution16.add("button6");
solution16.add("button7");
solution16.add("button9");
solution16.add("button11");
System.out.println("Solution16 = " + solution16);
// SOLUTION 17
solution17.add("button7");
solution17.add("button8");
solution17.add("button10");
solution17.add("button11");
System.out.println("Solution17 = " + solution17);
// SOLUTION 18
solution18.add("button1");
solution18.add("button5");
solution18.add("button6");
solution18.add("button10");
System.out.println("Solution18 = " + solution18);
// SOLUTION 19
solution19.add("button2");
solution19.add("button6");
solution19.add("button7");
solution19.add("button11");
System.out.println("Solution19 = " + solution19);
// SOLUTION 20
solution20.add("button3");
solution20.add("button7");
solution20.add("button8");
solution20.add("button12");
System.out.println("Solution20 = " + solution20);
// SOLUTION 21
solution21.add("button2");
solution21.add("button5");
solution21.add("button6");
solution21.add("button9");
System.out.println("Solution21 = " + solution21);
// SOLUTION 22
solution22.add("button3");
solution22.add("button6");
solution22.add("button7");
solution22.add("button10");
System.out.println("Solution22 = " + solution22);
// SOLUTION 23
solution23.add("button4");
solution23.add("button7");
solution23.add("button8");
solution23.add("button11");
System.out.println("Solution23 = " + solution23);
System.out.println("buttons pressed = " + myList);
System.out.println("solutions found = " + solutionsFound);
Collections.sort(myList);
if(myList.equals(solution1)){
if(solutionsFound.contains("solution1")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution1");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution2)){
if(solutionsFound.contains("solution2")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution2");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution3)){
if(solutionsFound.contains("solution3")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution3");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution4)){
if(solutionsFound.contains("solution4")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution4");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution5)){
if(solutionsFound.contains("solution5")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution5");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution6)){
if(solutionsFound.contains("solution6")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution6");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution7)){
if(solutionsFound.contains("solution7")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution7");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution8)){
if(solutionsFound.contains("solution8")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution8");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution9)){
if(solutionsFound.contains("solution9")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution9");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution10)){
if(solutionsFound.contains("solution10")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution10");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution11)){
if(solutionsFound.contains("solution11")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution11");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution12)){
if(solutionsFound.contains("solution12")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution12");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution13)){
if(solutionsFound.contains("solution13")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution13");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution14)){
if(solutionsFound.contains("solution14")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution14");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution15)){
if(solutionsFound.contains("solution15")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution15");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution16)){
if(solutionsFound.contains("solution16")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution16");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution17)){
if(solutionsFound.contains("solution17")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution17");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution18)){
if(solutionsFound.contains("solution18")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution18");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution19)){
if(solutionsFound.contains("solution19")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution19");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution20)){
if(solutionsFound.contains("solution20")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution20");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution21)){
if(solutionsFound.contains("solution21")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution21");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution22)){
if(solutionsFound.contains("solution22")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution22");
System.out.println("solutions found = " + solutionsFound);
else if(myList.equals(solution23)){
if(solutionsFound.contains("solution23")){
JOptionPane.showMessageDialog(null, "Combinations already found");
myList.clear();
else {
combinationsFound++;
JOptionPane.showMessageDialog(null, "Winner");
myList.clear();
repaint();
solutionsFound.add("solution23");
System.out.println("solutions found = " + solutionsFound);
From [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html]
[Volume is not precision|http://www.catb.org/~esr/faqs/smart-questions.html#volume] :
You need to be precise and informative. This end is not served by simply dumping huge volumes of code or data into a help request. If you have a large, complicated test case that is breaking a program, try to trim it and make it as small as possible.
This is useful for at least three reasons. One: being seen to invest effort in simplifying the question makes it more likely you'll get an answer, Two: simplifying the question makes it more likely you'll get a useful answer. Three: In the process of refining your bug report, you may develop a fix or workaround yourself.
Also please read up on god-objects (wikipedia has a write up on this) which is cured by dividing and conquering. Finally, you really need to simplify this code by using loops with your arrays. You can shorten this beast by over 70%, easy making it much, much easier to debug.
Edited by: Encephalopathic on Mar 30, 2008 6:59 AM -
Can anybody see what is wrong with this SQL statement?
Hey guys, just a quick question. Can anybody tell me what is wrong with this line of SQL? I keep getting a syntax error message. I've been trying for ages and I can't see any problem at all!"
{code}prepStat = connection.prepareStatement("INSERT INTO WeatherHistory (Date, Location, Overview, Temperature, WindDirection, WindSpeed, Pressure) VALUES ('"+date+"','"+location+"','"+temp+"','"+windDir+"','"+windSpd+"','"+pressure+"')");{code}
All the field names and variables definitely exist so I can't see what the problem is!DHD wrote:
Thanks for the replies.
I've matched the correct number of column names and variables, but still no luck.
And how exactly am I misusing Prepared Statements here?As noted above, not according to the code you posted. I didn't just pluck something out of my @ss and throw it out there. There was a reason behind what I said. And, if you mean you changed it, and you still got an exception, then post that exception (completely), and your new code, which is, hopefully, using PreparedStatement, (properly). -
My one year old macbook pro is full. : ( How can I see what's taking up all the GB?
My one year old macbook pro is full already. : ( How can I see what's taking up all the space? I cannot download anymore pictures. It's running slower than usual.
OmniDiskSweeper (free) - http://www.omnigroup.com/applications/omnidisksweeper/download/
Archive files onto other media until your hard drive has at least 10% of its total size free, or at least 15+ GB at all times. -
When I try to record a video on the Ipad Air, the screen automatically "zooms in" closer than when I'm taking a photo. So I frame the interview and record it. But when I export it to post it or edit it, I discover that only the screen was zoomed in, the camera wasn't, so I have all this extra stuff around the edges of my frame.
I don't need to zoom in, but I do need to be able to see what I'm shooting--otherwise, as I'm videotaping, I'm guessing at my picture's framing. But every time I switch from photo to video mode, the screen "zooms in." How can I see what I'm actually recording?
I've been searching for an answer for this for a while, but I can't find any responses to it! Thanks.Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
1) how can I see what is on my icloud and how would I edit the data that is on it?
2) I am having problems with an app syncing data with pc - how can I fix that? It is mobile noter.Welcome to the Apple Community.
You can see what's in iCloud collectively at settings > iCloud > storage & back up > manage.... You can only edit the data through the appropriate app (contacts, calendars etc)
For problems with 3rd party apps, contact the developer. -
How can I see what is in my iCloud and on iPad and remove some stuff on on iPod mini
How can I see what is in my iCloud and maybe remove some from my iPad mini
You have to sign into your iCloud account at icloud.com from a computer to view your iCloud data. Also, be careful not to delete data from your phone that is being synced to iCloud or it will delete if from iCloud too. (For example, if you delete a contact from your phone with Settings>iCloud>Contacts set to On it will remove the contact from iCloud too.)
-
How can I see what has been backed up
After doing a category BU to my WD Passport Ultra, how can I see what was backed up? The Smartware tells me that what I selected was done.But how and where can I confirm this? Thanksgrowlybear
Simplest way is to open the drive in Windows Explorer, then in the root you should find a folder WD Smartware.stor. Within that should be a folder for each device you've backed up, and within that a folder for each drive on that device that you've backed up. Within those drive folders you should find the files/folders that have been backed up from that particular drive. You can look through them in the same way that you look through the files/folders on your actual drive itself, and confirm that everything is there that you expect to be.
-
I updates my iPod before syncing it and lost all my song how can I see what song i lost?
I updated my iPod before syncing it and lost all my songs how can I see what songs I lost?
From your backup that is in iTunes or in iCloud or resync them from your computer.
-
How can I see what has been purchased on my iTunes account
How can I see what has been purchased on my iTunes account and when?
In iTunes, in the lefthand sidebar:
-
HT204053 How can I see whats in my Icloud account
How can I see whats in my icloud account
You can see all of your data from within the apps on your device that are syncing with iCloud (contacts, calendars, reminders, notes, etc.). You can also see some of it on icloud.com.
To get an idea what is using your storage, go to Settings>iCloud>Storage & Backup>Manage Storage. -
How can I see what is on my cloud?
How can I see what is on my cloud? Also, I keep getting asked to manage storage when I am watching videos that I have bought through the store. I have bought lots of cloud space only half of which is used. Is my device too full of pictures or videos and how do I know if they are on the cloud or stored on the I tunes store where I bought them from?
Managing (iCloud Data) on Your iPad
http://www.peachpit.com/articles/article.aspx?p=1899113
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
I recently installed an app CARTOON HD. I stupidly clicked install as I read that it wants access to my protected data.... I think. How can I see what it wants access to and how do I delete it
How do I delete it permanently if it has indeed requested my protected/personal data?
Maybe you are looking for
-
ITunes will no longer load on vista - Please Help.
Hi, I am running on windows vista, and recently iTunes will not load. I'd tried reinstalling many times, but the problem still continues. The error message I am getting is as follows. Title: "iTunes.exe – Bad Image" Body:"C:\Windows\system32\mssip32.
-
Retrieve images from DB and attach them to email through javamail
Hi, I'm trying to use javamail to send emails containing text and images (HTML mail), if I use a physical file in my computer as the image source and use FileDataSource everything works just fine. The problem is that the images in my app are stored i
-
FileConnection url to Sony Ericsson K750i
Hi there, I want to save data to my Sony Ericsson K750i. I know the phone implements FileConnection version 1.0. The list of roots taken from FileSystemRegistry.listRoots();returns single element named "c:/". I want to save a file.txt just about anyw
-
Remove drive still showing Part 2
I posted this question before & it was resolved by re-installing the drive & then removing it from time machine. This time however the drive is dead & will not show to be removed.This is the original question. A small thing, more annoying than import
-
i can't find a desktop option,in 'export to' there are three options,all to do with folders but no option to export to desktop