Remove drive still showing Part 2

I posted this question before & it was resolved by re-installing the drive & then removing it from time machine. This time however the drive is dead & will not show to be removed.This is the original question.
A small thing, more annoying than important but I recently changed my TM drive to a new larger one & also made some changes to the drives backed up.The issue is that the new back-ups still show a folder(empty) for a drive I have removed. I cannot find a way to remove this folder.
Thanks for any help

So that folder doesn't disappear if you enter TM, select it, click the "gear" icon and in the menu that appears click "Delete all backups of (name)"?
/p

Similar Messages

  • Deleted iPhoto library and folders containing photos but hard drive still show 32GB of photos?

    I have a new MacBook Pro Retina.  Was having all sorts of problems setting up with Time Machine/Time Capsule back-ups.  To cut a long story short I moved to trash a whole lot of photos I had imported, including the iphoto library. Have emptied trash - normal and within both iphoto and aperture - but About this Mac is still showing 32GB of photos.  Where are they? And if I wanted to reconnect them to iphoto, how do I do that?

    Open a Finder Window and go to your Username then to the Pictures folder. In there you will find a file, actually a folder but I won't get into that, called "iPhoto Library.photolibrary". It is that files (Folder listed as a Package) you need to Copy to your external drive.

  • How can I re-install Lightroom,removed but still showing in Creative Cloud as being installed.

    Well I think I screwed up. Three days ago I purchased the Photography Creative Cloud and downloaded Photoshop, Bridge and Lightroom. This evening I removed Lightroom through Windows un-install. It is still showing as being installed on the computer in the Creative Cloud window. I'm pretty sure I should not have un-installed it this way, but there it is. Is there anyway I can get it back on my computer? I am not ready for it yet but will need it in the future.
    Thanks for any help provided,
    Linda  

    Hi Linda,
    I think you're OK. The Creative Cloud window only updates daily, and/or with every relaunch. The Creative Cloud application currently has no uninstall utility, so you need to use the Windows control panel to uninstall.
    If you want to force an update to the Creative Cloud status, quit and relaunch the process. To quit, go to the gear icon in the upper right and choose quit at the bottom of the menu:
    If Lightroom doesn't show up as 'Install' after relaunching, let me know and I can investigate more.
    regards,
    steve

  • Apps removed but still showing up in Creative Cloud App. How do I reinstall them?

    After installing several apps on my laptop, After Effects, which I use for my business, wouldn't function on my desktop. I didn't know that you had to turn off the creative cloud connection on one computer before going to the other. Since I needed to deliver my projects, I removed the apps on my laptop. Three of them didn't seem to have an uninstall button on them. It didn't show up for some reason for - After Effects, Acrobat XI Pro, and Illustrator. I tried to find all references to them and finally threw every reference to them I could find into the trash. I must have left something in my system still because in the Creative Cloud menu, it shows that I still have those apps on my laptop still and that they are up to date. However, as I said, I threw everything that had to do with those apps that I could find in the trash.
    There doesn't seem to be any way to reload these three apps in the Creative Cloud app and since they are no longer in my Applications folder (I'm on a Mac) there is no way to uninstall or do anything else.
    How can I clear out the piece of software that thinks these three apps are still installed so that I can reinstall fresh versions? Thanks.

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Nforce 15.46 installed, network driver still shows 71.0.8.0

    On my P7N Diamond, The nvidia download page http://www.nvidia.com/object/nforce_winxp_15.46.html says the package contains Ethernet Driver (v73.10) WHQL but after installing it driver details on my network adapter still says 71.0.8.0. Anyone else having this?
    I'm gettting weird UPnP behavior.

    There is some stupid ongoing crap going on with Nvidia's ethernet drivers. Basically 15.46 installs an old driver in despite the readme saying it will install 73.10, and 15.45 doesn't offer to install an ethernet driver on my xp pro 32 bit p7n diamond despite it having an ethernet driver, apparently it doesn't recognize the nic or something. I have installed multiple nforce ethernet drivers so its not like the p7n has some unrecognizable hardware.
    Here's a thread over at nvidia forums talking about it. I uninstalled just the nvidia ethernet driver in add/remove programs and used this guy Fernando's customized nforce drivers from the nvidia forums (just ethernet is what I installed)which got me 73.1.40 and seems like the only way to get an ethernet driver newer than 71.0.8.0 for me and maybe for other p7n diamond xp 32 bit users other than screwing with the inf files and hoping you get things compatible.
    Edit: update OMG  and that did solve my crazy problem of not being able to load the config page on my dlink dns-321 when it's wired to my dlink dap-1522 and the p7n diamond is wired to my dir-655 and of course the router and bridge are communicating wirelessly. Which is the only setup where that problem occurs,but the setup I need to use and bought the dns-321 for.
    Edit except this driver seems to be 10/100 :(_

  • Removed variable still shows up in the variable screen of a Web report

    Hello,
    I am using a variable screen in a web report. I changed the variable on 0CALMONTH, but I still can see the old one. Two variables now show up. In Bex, only the new one can be seen.
    Does anyone knows the reason for that? I'm using BW 7.0 with the 3.5 reporting functionalities.
    Thanks in advance, Nathalie

    Nathalie,
      i'm sorry, it's not datasource... it's dataprovider
        delete the dataprovider from the the HTML Code...you could see the DataProvider in <Object>... </Object>
    suppose let us assume that you have DataProvider and DataProvider. you are not using DataProvider3, delete from the HTML code.
    delete this block from HTML.
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="SET_DATA_PROVIDER"/>
             <param name="NAME" value="DATAPROVIDER_3"/>
             <param name="QUERY" value="NEWQUERY123"/>
             <param name="INFOCUBE" value="ZSD_OPST3"/>
             DATA_PROVIDER:             DATAPROVIDER_3
    </object>
    Create a new Web application that will give you correct result.
    Can you please update the thread.
    all the best.
    Regards,
    Nagesh Ganisetti.

  • Firefox wasn't coming up. Attempted uninstall and was successful acc. to wizard. When downloading firefox install prevented until I had closed off firefox! Add/remove program still shows firefox with 30.56 MB. Clicking to uninstall nothing happens.

    Firefox icon is still on the start page and when selected the message is sorry firefox has unexpectedly crashed. Happens every time !

    -> Uninstall currently installed Firefox -> [[Uninstalling Firefox]]
    * Restart your system
    * Install latest Firefox -> [[Installing Firefox on Windows]]
    Check and tell if its working.

  • Hard drives not showing up in BIOS of UCS C22M3 Server

    Hi there,
    I am wondering if someone can help me work out why my internal hard drives aren't showing up in the BIOS. When I enable the RAID controller and set up an array they are detected and placed online, but if I remove the RAID array they do not show up in the BIOS as a device from which I can boot from. I am using the onboard SCU as the RAID controller and it makes no difference with this enabled or not, the internal hard drives do not show up in the BIOS. I have tried many different combinations but are unable to ever see the drives listed in the BIOS. Initially when I first received the server I was sure this was the case but have since formatted the drives. I have also tried resetting the BIOS settings to default.
    I would be most grateful if someone could help me as I have been working on this problem for a long time with no success.
    Thanks in advance.
    Tim
    This image shows the drives with the array active, if I remove the array the drives still show up on this screen but not in BIOS.

    Hey Tim, welcome to the communy!
    I don't think you are even supposed to see the individual disks as a boot option.  For all I know UCS is not intendeed to use its disks as JBOD (we'll see if that changes with new technologies like Hadoop) reason why you dont see the disks; you can see the RAID controller as a boot option  if you enable it to control the disks.
    I made the test in a C220 with a PCIe RAID controller (I don't have a C22 but it is very similar) and when I went to BIOS I didn't see the disks listed either, then I rebooted and pressed F6 and still the disks are not showing up, only the PCIe RAID controller showed up as a boot option:
    Last 2 things:
    1-Why do you want to see the individual disks as a boot option?
    2-Have you check another C22 or any other model to see if the behavior is different? If this does not happen on other servers (which I think it is NOT going to be the case) open a TAC case for further investigation.
    Rate ALL helpful answers.
    -Kenny

  • USB Hard Drive not showing up in AirPort Utility

    I have been using this AirPort Extreme for over two years now and it's been working fine. I finally decided to buy a self-powered USB hard drive so I can share it over the network. However, after I unpacked the hard drive, connected it to my Mac and reformatted it to HFS+ Journaled and GUID. I plugged the hard drive into my AirPort Extreme's USB port and waited. I looked in my AirPort Utility and saw nothing in the disk list.
    I spent hours searching online and discovered that I am not alone in this problem, although solutions are rare. I did try one solution where I hooked up the USB hard drive to a powered USB hub and the hub into AirPort Extreme. It actually worked once and after I rebooted everything, even though the hard drive still showed up in the disk list, no computers can connect to it. Although if I connect the hard drive directly to a Mac, it would still work perfectly.
    Having a USB hub is not a long term solution not that it's working anymore anyway. I would appreciate any suggestions you may have, thanks!

    Weilishu wrote:
    Thanks for the response. However, I'm not sure what you mean.
    So far my experience is far from "Just connect the external hard drive to the USB port on the back of your AirPort Extreme and — voilà".
    did you read the support article Daddy linked ? it clearly says
    JGG

  • I have removed all movies to Seagate portable drive to free up space on the startup disc and can confirm all can not be found on my computer, however it still shows as being there when i check storage ???

    I have removed all movies to Seagate portable drive to free up space on the startup disc and can confirm they are no longer on my computer after doing a search, i trashed them and then emptied the trash,  however they still show as being there when i check storage on the startup disc???????, can anyone advise what is happening here?

    Try reindexing spotlight on the Startup drive.
    Spotlight: How to re-index folders or volumes - Apple Support

  • I updated my printer driver but System Profiler still shows old version.

    How can I force os x to use newest driver?  My Brother hl2220 came with a driver version 3.1.3, but they showed an upgrade to 3.1.3b.  I downloaded it and installed it, but System Profiler still shows 3.1.3 in use.

    So you are saying the original DIMMs are there plus the ones you added, all were recognized before the repair but only the Apple-supplied after the repair.
    Just trying to keep all of this straight in my mind.
    In that case, you might try removing the DIMMs you installed and reinstalling, one at a time and see if they are recognized. If they are not, then they may have gone bad for some reason, who knows why, and it is time to look at the warranty you have from the people from whom you purchased the DIMMs.
    If it was someone like Crucial or OWC (macsales) they are really good about their lifetime warranty.
    If the warranty is lifetime, contact the supplier and see what the process is for replacement.
    It is strange that both would work, and then fail. But stranger things have happened with computers.

  • I am having trouble removing songs from my iPhone.  i have unchecked songs in the library on my mac, but they still show up on phone after syncing.  how do I remove them?

    I am having trouble removing songs from my iPhone.  i have unchecked songs in the library on my mac, but they still show up on phone after syncing.  how do I remove them?

    Hi asims01,
    Welcome to the Support Communities!
    The information below may be able to answer your questions about how to delete songs from your iPhone:
    Deleting songs downloaded to your device
    Tap the Music app.
    Tap More > Songs at the bottom.
    Scroll or search for the song you would like to delete from your device.
    Swipe right to left on the song, and then tap Delete.
    Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
    Also, this information can be found on page 64 of the iPhone User Guide for iOS 7
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
    If you have iOS 7, this will delete the song from local storage, but the song will still appear with a cloud symbol in the Music app, as you've noticed. To hide the iTunes in the Cloud purchases, navigate to Settings > iTunes & App Store, and disable "Show All: Music”
    There may be a few orphaned songs on your iPhone that were partially downloaded or corrupted in some way. If that is the case, you can erase all of the music from your phone.  Follow the instructions below and select the Music app under Usage:
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    I hope this information helps ....
    - Judy

  • My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

    My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

    Update to iTunes 10.3.1
    After you have finished, you can re download your iTunes purchases without having to re purchase.
    iTunes 10.3.1
    " Download Previous Purchases. Download your past music purchases again at no additional cost. Your purchases are available in the iTunes Store on your Mac or in the iTunes app on your iPhone, iPad, or iPod touch. Previous purchases may be unavailable if they are no longer on the iTunes Store."
    "Available on iTunes in the U.S. and Canada only. Title availability is subject to change."
    From here.  http://www.apple.com/itunes/

  • Deleted podcasts in Finder, still show up in iTunes, how to remove?

    Well, I rummaged a bit in the old threads and found some stuff... but I'm looking for a simple solution. I'd like to delete from iTunes all the podcasts that I had deleted via the Finder.
    I can figure out which ones if I laboriously, manually, click play and am then prompted that iTunes can't find it. What a drag! When I do that, it changes the symbol to a !.
    The problem is that I thought Refresh would do fix everything! Instead that changed all those ! to solid buttons! So, I'm in worse shape than before!
    Is there any way of asking to iTunes to double check its own list and delete anything from its listing that it can't find?

    For some reason I couildn't edit my previous post! Hmm.. don't know why.
    In any event... I tried Remove Dead Tracks. At first, I thought it doesn't distinguish between podcasts that are listed but haven't been downloaded yet and tunes that have been deleted from the finder but are still listed!
    It was reporting 91 dead tracks, but I've only deleted a handful via the finder. (Well, so I thought. It's pretty clear on further inspection that I had, in fact, deleted that many-- I had deleted one folder of dozens upon dozens of 1 minute shows.
    So, I'll have to try it in the future if this happens again... though it doesn't give the option to delete them one at a time, but rather says it will delete them all-- just like Super Remove!
    Still, appreciate your help!

  • I remove lyrics from iTunes, but they still show up in my iPhone :(

    So I download a song and it came with some unwanted text. I clicked on the song, went to file>get info, clicked on the lyrics tab, and removed the text. Then I synced my iPhone. However, the unwanted text still show up in my iPhone. What can I do to get rid of it?

    This is the lyrics I have on the computer.
    This is what I have on the phone, no matter how many times I sync it.

Maybe you are looking for