Can I subclass an LOV from another form?

I'm not well-versed in Oracle forms. According to Forms documentation, a restriction of LOV's is "The LOV must exist in the active form module." But is there any way to define the LOV in a library form - (like, form1.fmb) - and have form2.fmb use the LOV without also creating it in form2.fmb?
Subclass-ing sounds like the way, but I can't figure out how to do that. The objective is to add an LOV to 5 forms by changing only the library form that they all attach, and without changing the forms themselves. I've been able to add a text item to the library form and recompiling the other 5 forms, but so far have not been able to add the LOV item this way.

Yes, I can drag and drop the item into the target form, but I'm trying to avoid that, if possible. Sorry if my description is confusing.
I'm working with a purchased application, and we try to minimize modifications to the baseline forms. I was able to add a text item to a data block defined in a library form, and when the 5 forms that need to display that item are compiled, they pick up the text item from the library form. I didn't have to do anything to the 5 'front-end' forms except compile them.
I don't know the mechanics of forms compiles, so I may not be using the right terminology. Bottom line is, my change to the library or template form was propagated to the other forms at compile time - having made no changes to the target forms.
When the user requested that this new field be validated against a database table, I expected that I would be able to add the LOV and the record group to the library form, and when I recompiled the other forms, the new LOV/RG would propagate to them, just as the new text item had done. However, when i do that, I get an error: 'Can't find swvpsuf_lov'.
If I go into one of the target forms and add the lov, it does work. If I go into a form and drag the lov from the library form, it also works - but I didn't have to do that with the text item so I'm preplexed as to why I have to do it with the LOV.
I'm just trying to find out whether:
a) the only way to do this is by adding or subclassing the lov into each target form, OR
b) there is some way to accomplish it by just adding the lov/rg stuff in the library form and recompiling the target forms - and how to do it.
Thanks!

Similar Messages

  • What are the 3 ways to call a form from another form?

    What are the 3 ways to call a form from another form?
    What is the command to call a report from within a form?
    How do you attach a menu to a form?

    Hi,
    1. Should be new_form, call_form and open_form
    2. The command is run_product
    3. There is a property 'Menu Module' in form, just change it to your menu file name
    Regards,
    George
    Can anyone help me with the following questions...
    What are the 3 ways to call a form from another form?
    What is the command to call a report from within a form?
    How do you attach a menu to a form?
    Thanks for your time..
    Madhu

  • Control access of a form from another form.

    hi all,
    Please help me .
    This is a system which contains a lot of forms (more than 100) . The system administrator can specify whether a user can insert, update,delete or query for each form (this varies for each user). So, when a user logs in and calls a form i have to enable / disable the insert, update,delete or query according to the user who has logged in and the privileges the system administrator has given for that form.
    i used the call_form method with query_only mode and no_query_only(normal mode) option . The normal mode allows insert,update,delete and query together but i want the user to insert into database without querying any of the records.
    So, in short , i would like to know if i can enable/disable insert,update,delete & query of a called form(Form B) from calling form (Form A) without having to modify (Form B) and without issuing any grant statements in the database side ? Is there any option like the one in the call form method?
    Thanking you in advance.

    Thank you very much for the response.
    yes, set form property and set block property can be used when i want to enable / disable insert in the current form. But, what if i want to control enable/disable insert from another form (the main form) ????
    Can i pass parameters ? without making any change in the current form.

  • Frm-92101 happens when I open a form from another form and close it.

    Frm-92101 happens when I open a form from another form, check something, show a message to the user and exit the form to the previous form.
    Forms version: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
    When I put before the "EXIT_FORM" two messages, everything is fine and the second form is closed and I repeat to the first form just as I wanted.
    In forms 9.0 it didn't happen.
    Does it have a connection with the fact I use JRE instead of JInitiator?
    Thank you.

    >
    There are numerous causes of the FRM-92101 error. I recommend you start your investigation by tracing your Forms session so you can see what your form is doing when the error occurs. Check out My Oracle Support document How to Use Forms Trace with Forms [ID 209372.1] for information on how to enable the trace. Also, take a look at My Oracle Support document Known Causes of FRM-92101 Error In Forms [ID 604633.1].
    Hope this helps,
    Craig
    >
    I have just found that there is a "Synchronize" command in one of the main attached libraries, and when I comment that command the application works well. But I don't want to comment it because it's a great library and I assume it has a part in the system.
    I have discovered that in the new Forms' help, the fact that the System.Current_Item mustn't be null so the command "Synchronize" will work, is mentioned. In the old Forms' help, that fact is not mentioned.
    So I tried to put it inside a condition that checks if the current item is not null, but the compiler doesn't recognize the "current_item". I don't know why. Because it's a library? So how can I check this? I can sent it as a parameter, but I don't want. Do you know something about it? Thank you.

  • File upload hanging when called from another form

    Hi
    I have created a file upload form from the documentation I found on metalink and the form works fine on its own. I have then implemented the form into a multi form application and when the file upload form is called from another form it hangs trying to get to the client drive so that it can pick up a file. I have tried using the 'call_form', 'open_form' and 'new_form' built-ins but the results were all the same. Can anybody help me?
    Maria

    Hello,
    This is not the support, so there are no post more urgent than other.
    Francois

  • Selecting fields  PLD  from another form

    Hi Experts,
                    I want to print invoices which are in four format like sometimes i am using GRN no which is not in invoice form of SAP -B1  if i want to select fileds in PLD from another form Lets say right now if i have open A/P invoice and some fields is in another for Lets Say Item master data so can i select that feld  in PLD
                        Pls revert back that this can be done or not or even if  i am not clear enugh
    thankx and regard
    Satish tale ( SAP-B1 functional consultant ,Paradyne Infotech limited)

    Effectively, you can copy a field from a form to an other in order to add tables.
    Sincerely,
    Olivier SPINELLI

  • Open the form from another form...

    How can I open the form from another form with the PL/SQL code???
    The my form are create from OracleDesigner and developed with OracleBuilder.
    Regards
    Basilisco Giorgio

    You can read "About calling reports, displays, and other forms from generated forms" topic in the Designer on-line help. By the way in Forms there are CALL_FORM,OPEN_FORM and NEW_FORM built-ins.
    Helena

  • Query a second form from another form by passing value

    Hi,
    I have two forms. I am trying to query a second form from another form. I have managed to display the query results in the second form by passing value from the first form. I did it according to the details in the Oracle 9ias Portal Technical FAQ html file.
    It works fine when there is already a row in the first form. When I insert a new row in the first form and query the second form which has key from the first form, there is no matching rows displayed which is correct but detail action mode is 'NONE' for all detail rows.
    According to the FAQ, it says the following:-
    "When the called form is started, it executes a query with the supplied condition (in this case, "where deptno=10"). If the query is successful, the matching rows are displayed in Update mode. If no matching rows are found, the form starts in Insert mode."
    It does not happen for me. I get NONE mode for no matching rows. Is this a BUG ? I am working on Portal version 3.0.9.8.0.
    Is there something wrong in the code I wrote ? I would like to have all the detail mode as Insert.
    Here is the following code I wrote on SUCCESSFUL SUBMISSION OF THE FORM.
    declare
    my_url varchar2(1000);
    v_deptno number;
    begin
    v_deptno := p_session.get_value_as_NUMBER(p_block_name => 'DEFAULT', p_attribute_name => 'A_DEPTNO');
    my_url := 'PORTAL30.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=1268491962&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=deptno&p_arg_values='||LTRIM(TO_CHAR(v_deptno))||'&p_arg_names=_deptno_cond&p_arg_values=%3D';
    go(my_url);
    end;

    Hi,
    The behaviour is OK as in the MD form there are two states "Save" and "Query and Save" and when the form is in "Query and Save" mode that means you can use it for both Query aswell as Save which is decided by your "Master action" if that is None it is used for Query , for Insert you will have to select Insert ,this is the Insert Mode behavior.
    If you open a new MD form that is also in the "Query and Save" the same behaviour will be there.
    Hope this answers your query.
    rahul

  • If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?

    If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?  I imported music from a CD into my compter at work and when I got home and went to my iTunes account none of the songs were in my library.  I also noticed that on my Work computer there were a couple songs that I had to click on the little 'cloud' icon before I could listen to them (these were not songs I imported they were songs that were already in my library).  Not sure if this makes semse...help.

    jamie171 wrote:
    My question is since I have imported them into my iTunes library from one computer why can't I access them from my iTunes library from another computer that I have authorized to access whats in my library?  Is there no way to import songs only once into the library and then access them from all my authorized computers?
    Only if you have iTunes Match or of the computers are on the same local network.

  • How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

    How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

    Move the domain.sites file from one computer to the other.
    The file is located under User/Library/Application Support/iWeb/domain.sites.  Move this file to the same location on the other computer and double click and iWeb will open it.  Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
    Just create a new site on the same domain file and it will appear below the other site.  If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

  • My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open?

    My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!

    Thanks R_Kelly:
    Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
    Operating System: Windows Vista 32-bit
    Version: 6.0 Service Pack 2
    System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
    Physical processor count: 4
    Processor speed: 2400 MHz
    Built-in memory: 3069 MB
    Free memory: 1631 MB
    Memory available to Photoshop Elements: 1598 MB
    Memory used by Photoshop Elements: 69 %
    Image tile size: 128K
    Image cache levels: 8
    Video Card: ATI Radeon HD 4800 Series
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Caption: ATI Radeon HD 4800 Series
    Video Card Memory: 512 MB
    Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
    Photoshop Elements scratch has async I/O enabled
    Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
    The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
    The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported.

  • How to refer the trigger written in one form from another form ?

    How to refer the trigger written in one form from another form ?
    Thanks,
    Ravi Shankar

    Try to convert the PL/SQL code from Forms trigger into a PL/SQL library(.PLL),
    and then attach that PLL in your forms.
    Note that all Forms objects should be referenced indirectly, for example,
    you have to rewrite
    :B1.DEPT_CODE := :B2.DEPT_CODE;
    :B3.TOTAL_AMOUNT := 100;
    ==>
    copy('B2.DEPT_NO','B1.DEPT_NO');
    copy('100','B3.TOTAL_AMOUNT');
    This is the best way to share PL/SQL code among Oracle Forms.

  • My slide presentation (with sound) is done. How can I change one song from another?

    My slide presentation (with songs) is done. How can I change one song from another?

    Do you still have your Aperture Slideshow project? Then open the slideshow and select the one of the green audio file clips in the film strip that you want to replace. Press the "delete" key and drag another audio file from the Media Browser directly onto the slide, where the sound should start.

  • HOW TO CALL A FORM FROM ANOTHER FORM

    HOW TO CALL A FORM FROM ANOTHER FORM [local machine]

    Balraj wrote:
    HOW TO CALL A FORM FROM ANOTHER FORM [local machine]The way you asked question is this bit of request or order?
    Secondly, you used capital latters which are being treated as Shouting Language. So, always try to switch off the Capslock of your keyboard.
    Thirdly, you are very lazy to serach on forum or google for your problem instead of waiting someone to anwer your question.
    Your should seriously have a look at FAQ.
    http://wikis.sun.com/display/Forums/Forums+FAQ
    Also here.
    http://www.catb.org/~esr/faqs/smart-questions.html
    Please read documentation for the initial questions.
    -Ammad

  • Can i use App schema from another Oracle database.

    Hi everyone,
    can i use application schema from another Oracle database and how can we do this. the reason is that current database where apex is installed is get very slow because of the size of database and application usage.
    Regards,
    Kashif.

    user10485983 wrote:
    Please update your forum profile with a real handle instead of "user10485983".
    can i use application schema from another Oracle database and how can we do this. the reason is that current database where apex is installed is get very slow because of the size of database and application usage.
    You can (using database links), but this will generally result in even poorer performance (unless by "another Oracle database" you mean using RAC?)
    It sounds more like you either need to upgrade your systems, or refactor your applications to have a smaller performance footprint.

Maybe you are looking for

  • Last Played Data with Multiple devices

    All: My household has 2 iPod Classics used for playing music and they're both synced to the same iTunes library.  I've got a ton of smart playlists that are dependant on the "last played" and "last skipped" fields to keep fresh stuff in them.  Most a

  • I paid for Lion and downloaded once to my lap top.  Now I want to download to my IMac

    I paid for Lion and downloaded it to my lap top and now want to download it to  my IMac and cant' find it on ITunes anywhere.  Where is it?

  • How to open a Word Document from Developer Forms

    Hi Buddies, Can anybody help me out in this regard. My requirement is like this. In my developer Forms Screen i have one button named resume. if i click that button then that particular persons resume has to be opened which is MsWord file(.DOC)locate

  • XML - Header - Lines Report

    Hi, I have created Template for AR Invoice. There are two parameters to the 1. AR Invoice Number 2. Sales Order Number. for AR invoice report is working fine. for Sales Order, the issue as follows.  I have 2 AR Invoices created of a Sales order. I ca

  • Format a number with a decimal to show the value but not the decimal point

    I have a value of 129.50 in the DB. I'm using the htp.prn() function to export this value to a txt file. I have the field padded with leading 0s (so it looks like 0000129.50) I need to keep the value for the .50 but don't want the decimal point to sh