Can i test a CAVS Simulator for a Non AIA Bpel Process.

Hi,
Cannot i create a simulator definition in a normal SOA Composite unliek a ABCS which comes for with AIA PIP. If its ABCS then i can see the BPEL COmposite deployd on weblogic and i can easily attach the simulator id to the said ABCS. but I have created a simple SOA Service calling a legacy system. In that case how can i list my SOA Composite in AIA Console to use the CAVS applciaiton to test it.
I have gone through the documentaiton of CAVS Simualtion and test definitions.it always go with ABCS Testing . Cannot we test a SOA 11g(With out AIA) Project with CAVS. If Yes hwo will be testing it. How will my instance details can be viewed in AIA Console where i can attach the AIA Simulation Definition.
Thanks,

From Custom Composite calling AIA Error Handling Process
Appraoach given in steps.
Thanks,
Venugopal SSS RAJA

Similar Messages

  • BAPI for Vendor Non-PO Invoice processed through MIR7 Transaction

    Hi All,
    I have a requirement where i will get data from flat file. Using this data Vendor Non-PO Invoice
    will be processed through MIR7 transaction with Multiple line items - Invoice Upload Parking the document for vendor non-po invoices.
    The data is in below format in flat file:
    Header fields in 1st line
    Dr. Key related fields in 2nd line
    Cr. Key related fields in 3rd line
    Header fields in 4th line
    Dr. Key related fields in 5th line
    Cr. Key related fields in 6th line
    etc .... in flat file
    In these main fields coming in from flat file are: comp.code, doc.type, vendor no,
    Debit/Credit indicatorSHKZG, G/L a/c no, inv/post dates etc..
    My issues:
    1. I am planning to use F.M BAPI_INCOMINGINVOICE_PARK is it the correct F.M!
    But Here PO number seems to be mandatory for this F.M but it is not available as per our flat file,
    if so can anybody suggest a BAPI for Vendor Non-PO Invoice parking for MIR7 transaction!
    2. What are the parameters need to be used for from above flat file data especially for 2 line itemshttp://Dr./Cr. data other than header data. So as per Header & 2 Line items http://Dr. & Cr. Data which parameters will be updated with which data in above flat file! can anybody clarify!
    3. Also in flat file WorkflowNo is available in which parameter this fields will need to be filled & also by doing this will it trigger workflow automatically!
    Can anybody clarify about above points!
    Thanks in advance.
    Thanks,
    Deep.

    Hello Deep,
    I know it might be quite late for you for this answer, nevertheless I will write that, because there are lots of question like yours. bapi_incominginvoice_park is also a suitable bapi for you. All you need to do is call it this way:
    data: headerdata like bapi_incinv_create_header value is initial,
            table_item type table of bapi_incinv_create_item,
            gl_account like bapi_incinv_create_gl_account,
            table_gl type table of bapi_incinv_create_gl_account.
    * fill headerdata and table_gl, leaving table_item empty
    CALL FUNCTION 'BAPI_INCOMINGINVOICE_PARK'
        EXPORTING
          HEADERDATA                = HEADERDATA
    *   ADDRESSDATA               =
        IMPORTING
          INVOICEDOCNUMBER          = lv_docnr
          FISCALYEAR                = lv_year
        TABLES
          ITEMDATA                  = table_item
    *      ACCOUNTINGDATA            = table_acc
          GLACCOUNTDATA             = table_gl
    *   MATERIALDATA              =
    *      TAXDATA                   = table_tax
    *   WITHTAXDATA               =
    *   VENDORITEMSPLITDATA       =
          RETURN                    = lt_return.
    This works perfectly for me, creating a mir7 document without refering to a PO. The trick here is to fulfill the glaccountingdata importing table while leaving itemdata empty.

  • XSD validation for incoming data into BPEL process

    Please suggest how to validate XSD incoming data into BPEL process.
    I just wanted to verify the data before entering into BPEL

    Hi,
    I guess i am replying very late.
    In BPEL 2.0 we have an activity called "Validate" which can do the XSD validations.
    "Lets Learn Oracle SOA: Validate XML schema In BPEL"
    Regards,
    Chinmaya

  • Mapping tested successfully in Simulator but fails in SXI_MONITOR

    Hi gyus,
    The Outbound message structure is the following:
    MT_CAP_BANKS
    actions     1..1    xsd:string
    RECORD   0..unbounded  Segment
       Field1
       Field2
       etc
    The target Inbound message structure is the structure of the JDBC receicer adapter, since the scenario is Proxy to JDBC.
    MT_DB_BANKS
    STATEMENT       1..unbounded
    DBSTATEMENT   1..1
       action
       etc
    I want to have one STATEMENT per RECORD segment. But the RECORD segment may also be missing in case that we want to do massive delete of all the entris in a table. So I may have only the action field in some test cases.
    Therefore, I am mapping RECORD>mapWithDefault>STATEMENT.
    Mapping is tested successfully in simulator for all cases, either many RECORD segment or no RECORD segment. Interface mapping tested successfully. However, when we are doing real tests, mapping works fine with many RECORD segments, but fails with no RECORD segments (Cannot produce target element /ns0:MT_DB_BANKS/STATEMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd).
    Any ideas ?
    I also tried to chang the mapping with IF RECORD EXISTS THEN STATEMENT='' ELSE RECORD-->STATEMENT but problem still remains!!

    Hi,
    I'm not really sure why you are encountering this error. Have you tried any context modifications before mapping to field STATEMENT?
    Could you try this mapping?
    constant:null -----------------------------------------> \
    RECORD --> mapWithDefault:null --> equalsS:null --> ifThenElse --> STATEMENT
    constant:hasValue -------------------------------------> /
    The code should perform just like the one with the mapWithDefault without the ifThenElse, but it's worth to try.
    Hope this helps,

  • How to get a Monthly Depreciation Simulation for next fiscal year?

    I need a report that give me the depreciation simulation for next fiscal year, but I need it monthly wise. I run report S_ALR_87012936 with report date 31.12.2011 and evaluation period = month.
    The report gives the error message AA669 Fiscal year 2011 is already closed in Financial Accounting
    I read that this report doesn't work monthly wise for future years. Is there a workarround?
    Best regards!

    Hi,
    I'm sorry there is only RASIMU02. Note 396974 describes, this is a missing functionality and there  is no workaround.
    Reports on derived depreciation areas that do not post any values to the
    general ledger are allowed with the evaluation period year. An
    evaluation using month, quarter or half-year is not supported.
    In general, the depreciation forecasted by monthly in report RASIMU02 are only for depreciation area which posts depreciation to GL. For non-GL posting area, we recommend you simulate the depreciation 
    in 'fiscal year' mode. if you simulate the depreciation 
    Basically RASIMU02 is NOT designed to provide period simulation for these non posting areas. This because RASIMU02 uses for periods which have been posted already the created ANLP. But ANLP´s  are not created for non-posting areas. So in these periods where   a depreciation run had been executed already, RASIMU02 will not show
    values.                                                                               
    For AA 669 please see:
    Best Regards Bernhard
    Edited by: Bernhard Kirchner on Nov 25, 2010 9:20 AM

  • Dynamic JNDI name for database adapter in BPEL

    Hi All,
    I am having some major issues trying to make the JNDI location for the database adapter dynamic (10.1.3.4). I already went through the followin link, but that didnt work for me: http://www.oracle.com/technology/pub/articles/bpel_cookbook/carey.html
    The below example works, but only the first run. Second time around the first runs JNDI value gets retained and connects to that database.
    This is what worked atleast the first time.
    I parameterized the JNDI with a variable defined in the partnerlink definition in the bpel.xml
    In Bpel. xml
    <partnerLinkBinding name="updatetbl">
    <property name="wsdlLocation">updatetbl.wsdl</property>
    <property name="CONN">eis/DB/na</property>
    <property name="retryInterval">60</property>
    </partnerLinkBinding>
    In the updatetbl.wsdl file
    <service name="updatetbl">
    <port name="updatetbl_pt" binding="tns:updatetbl_binding">
    <jca:address location="$CONN"/>
    </port>
    </service>
    At run time I change the partnerlink CONN variable in embedded Java.
    try
    Element targetAdapterElement =(Element)getVariableData("Invoke_getFromTbl_OutputVariable","getFromTblOutputCollection","/ns2:getFromTblOutputCollection/ns2:getFromTblOutput/ns2:SRC_JNDI");
    getLocator().lookupProcess("JndiIssueTest").getDescriptor().getPartnerLinkBindings().getPartnerLinkBinding ("updatetbl").setPropertyValue ("CONN",targetAdapterElement.getTextContent());
    ("updatetbl").getPropertyValue ("CONN"));
    catch(Exception ex)
    addAuditTrailEntry("Error is " + ex);
    This works fine the first time, but the second time I run it to look at a different CONN value, it somehow still connects using the first runs value!
    If I redeploy or clear the WSDL cache, it works. But we plan to run it multiple times from several environment so manually or programatically clearing WSDL is not the right solution.
    Can someone tell me what is the standard process of doing this so it works everytime?
    Thanks,
    Shaf

    Shaf,
    Please refer the mail thread for details. If you want I can send you(send me your email id) the sample BPEL process which uses Dynamic JNDI.
    Re: How to externalize JNDI name (setting JNDI name dynamically)
    Thanks,
    Sen

  • Tcode for Sales Order Output(collective processing)

    Hi
    What is the tcode or program to print sales orders collectively, similar to VL71 for deliveries & VF31 for invoices.
    Regards
    Uma

    Hi Uma
    There is no such T code for sales order print.
    You can use SE38-> run RSNAST00 program for sales order output (collective processing).
    try and revert.

  • How to install Oracle BPEL Process Manager for OracleAS Middle Tier

    hi,
    i need to install BPEL process manager, so i download the following file from otn
    1.soa_windows_x86_101310_disk1
    2.soa_windows_x86_bpel_101310
    here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
    so i start to complete the pre-installation task
    1.installed Oracle database 10g
    2.Run the Integration Repository Creation Assistant on the Database
    3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
    and installed according to the Oracle application server installation guide.
    installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
    4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
    here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
    so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
    default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
    the next screen is select installation type here there are two types named
    1.BPEL process Manager for Developer (371MB)
    2.BPEL process manager for Oracle AS Middle tier (107MB)
    i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
    pop up window opens with title dependencies
    error:
    BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
    so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
    please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
    Thanks in Advance
    Aswath Thaniga

    If you choose the developer version you will be fine.
    If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
    D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
    The bin directory is just the executables for that home, its not the actual. home.
    cheers
    James

  • What can Interconnect do better than the BPEL process manager

    I would like to know which integrations problems can be best done with Interconnect and which with the BPEL process manager. It seems to me that the BPEL process manager can do just the same.
    Is this true?

    Hi,
    In my opinion BPEL can do more than Interconnect.
    Yes they have overlap.
    From my opinion Interconnect is used as a data-interface tool. where Bpel has more functions to create and start processes, work easily with services. Sure a data interface can be build in BPEL (the Oracle one to be specific), and there should be nothing wrong with it.
    And from a support point of view you want to have 1 tool to maintain instead of 2.
    My guess is that Interconnect, and the solutions build with it, will eventually dissapear into the BPEL process manager.

  • Can you share the source code for Customer ToughDay stress test tool?

    Hello,
    I would like to try Customer ToughDay tool (http://dev.day.com/docs/en/cq/current/testing/tough-day.html) for load testing of our author instances of CQ5. While I am able to execute the application, the logging with log4j seems to be configured incorrectly.
    Can you share the source code for toughday-5.5.jar?  I think it can be a very good starting point for those of us who are new to CQ5 and need to load test it.
    Thank you!

    Hi,
    I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
    What has prompted this question?
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • How can I test for the bas unit enterd in a control?

    How can I to create a polymorphic vi where the user can enter either volume or temperature.
    how can Labwiev test for the base unit entered
    pseudocode example:
    input X
    if X.base_unit == m^3 do ....... 
    thanks for any suggestion to resolve or avoid my problem
    Solved!
    Go to Solution.

    Hi schaerm,
    you have to dig deeper.
    An idea is this one:
    The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
    You can also format the number into a string and analyze the unit here...
    Message Edited by GerdW on 02-07-2010 07:21 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Conditional actions in Photoshop can't test for Lab color mode.

    I’m posting here because the feature request/bug report form isn’t currently working for Photoshop.
    I wanted to create an action to determine if the color mode of an image is Lab, and if so, convert it to RGB. But there’s no conditional action test for Lab color mode.  The list of conditions that can be tested includes RGB, grayscale, and a couple of other color modes, but not Lab,  Does anyone know of a workaround?  Can I get it done with scripting?
    It would be a big help if the next update of Photoshop CC could include a conditional action test for Lab color mode.

    This for example would convert an active Lab image to sRGB:
    if (app.documents.length > 0) {
    if (app.activeDocument.mode == DocumentMode.LAB) {
    app.activeDocument.convertProfile ("sRGB IEC61966-2.1", Intent.RELATIVECOLORIMETRIC, true, true);

  • Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.

    Hi Team,
    Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
    Thank You,
    Best Regards,
    neeraj

    Hi Team,
    Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
    Thank You,
    Best Regards,
    neeraj

  • I'm looking Labview simulations for CAN,Byteflight,flexray or other examples!!!

    I'm looking Labview simulations for CAN,Byteflight,flexray or other examples. Please contact with me. tha software that i have is LabView 7.1. It is very important thanks.

    Hi
    These documents are ok, but is there a way to simulate a CAN-device?
    I'm a newbie to CAN and I want to make a dry run with the CAN-library I make before I connect to the real device.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...

  • How can I do simulation for temperature

    How are you?
    How can I do simulation for temperature sensor for two hours, should be from 10AM until 11:59AM in summer season (10 degree gradually)
    i want simulate temperature sensor  in C,F and K in one gragh.

    duplicate post!
    Stick with your original thread, when the question don't change. Keep all relevant information in one thread!
    A bigger or bold font doesn't add any information/clarification to your question
    Message Edited by GerdW on 01-16-2010 01:14 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

Maybe you are looking for