Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

10.6.8 won't run on a PowerPC Mac.
10.6.8 also won't run the latest Java. Here's what version of Java you can run:
https://discussions.apple.com/docs/DOC-5532

Similar Messages

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

3rd party AU plug ins vs Logic Plug ins

has any one got any suggestions of any 3rd party plug ins or instruments that compare or better the Logic ones, i am very happy indeed with what i have at the moment but feel some of the sounds i am getting from the synths are lacking a bit of warmth, maybe i need to dig a little deeper or maybe there are better things out there, obviously the ES2 is a killer piece of software but some of the pads that i am creating are not up to scratch. Is this just me? am i not adding enough plug ins to the synth or is it just not as deep as people say it is? i hear waves are a good too, discuss..............Thanks

3rd party stuff eh?
Spectrsonics makes stellar AU plug ins. Can't wait for the aforementioned atmosphere to come out as UB this fall.
Also mentioned before, Reason is just a fun program that is very powerful and inspiring.
Odd that many people mentioned the NI products. I would, but after getting FM8, I just can't say I am an NI fan.
FM8 sound great! The software is powerfull, the UI is easy to use, the flexibility is enormous, but I can't recall all the setting of patches with Channel strip settings. I was quite disappointed as I wanted to Use FM8 to give me that DX-7 Rhodes sound to use for live gigs, but recalling a performance channel strip didn't load the envelopes, and the sound just didn't work. I emailed NI and asked what the deal was, and they told me it was a bug, sorry. The only workaround they could give me was to load the patch from FM8 it's self.
I still use FM8 for recordings, but never for live use. I also decided not to try any new NI products fearing more incompatibilities with how I work.
NI's stuff does sound great, but with tweaking I can get most of my other synths to match it.

How do i import 3rd party VST plug-ins into Logic Express 8???

I downloaded some vst plug-ins for logic express online somewhere and the instructions to install them says to go to library/audio/plug-ins/vst and to just drop them in there. i do that, but then when i drop them in there and then start up Logic, they're no where to be found in the program
is there another way you are suppose to import vst's?

You can't use VST plugins straight in Logic. The format recognized is AU (Audio Units) but there is a workaround using a program called VST to AU Adapter.
http://www.fxpansion.com/index.php?page=5
cheers
rob

Problems using third party Flash plug-ins for Captivate 4 content

I'm using a few Flash CS4 plug-ins (Control VR, 3D Carousel XML) that work perfectly well in Flash.
However, when importing the animations into Captivate 4, numerous cryptic errors occur which seem to be related to the XML file.
Do I need to do anything different when importing Flash animations that include XML data? The XML files are all in the same folder as the Flash movies and the Captivate file, but it still doesn't work.
Any help appreciated!

Hi Kevin,
Because this is a commercial plug-in and therefore I cannot test it without purchasing the component. I would recommend that you report this issue to the Adobe Captivate team and send them the both the source CP file and the component. Although I have had some success in getting XML code recognized by CP there could be many reasons why the XML code from this component is not being intrepreted.
Adobe Captivate Feature Request/Bug Report Form
Best - Mark
Visit the macrofireball blog

Using 3rd Party packages when creating jar - program doesn't run

I am using the xerces and xom packages for xml etc in my program.
It works fine when run from a command prompt, but as soon as I package it into a jar I get the java.lang.NoClassDefFound error for the nu.xom.Builder class (one of the 3rd party classes.)
Reading through these forums has yielded several suggestions, none of which work.
I am probably making some massive stupid mistake, but cannot see it...
My manifest:
Manifest-Version: 1.0
Created-By: 1.6.0 (Sun Microsystems Inc.)
Main-Class: be.bavardage.vocab.VocabGUI
Class-Path: serializer.jar xercesImpl.jar xercesSamples.jar xml-apis.jar xom-1.1.jar
using the jar comand line prompt:
jar cfm vocab.jar MANIFEST.MF be\bavardage\vocab\*.classCan anyone give me any indication as to what I am doing wrong...

bavardage,
I too am reading forum messages to try to do just what you originally wanted to do. I have 3rd party JARs and I have always first extracted them and then turned around and JAR'ed them up into my single Remote.jar (actually I'm so new to Java that I don't yet change things that aren't broken and this was working when I got it)
jar xf jakarta-oro-2.0.5.jar
jar xf jasperreports-1.2.1.jar
jar xf iReport.jar
jar cmf mainClassSpec Remote.jar *.class org/ net/ it/I am reading the forums for a way to NOT do this. My reason is because I want to make the application Java Web Start (JAWS) capable. By zipping all the JARs up into one I end up with a JAR over 6 MB! I am also adding internationalization and I really need to keep the ListResourceBundle classes in a separate JAR so I can keep adding languages and not cause the entire 6 MB file to be downloaded each time.
Using Java Web Start is the real motivating force here. I need to keep all JARs separate so that when there are code changes or new languages only one small JAR will be downloaded again by JAWS not the huge iReport.jar file at 4,218KB nor the somewhat smaller jasperreports...jar at 1,225KB (at 64KB jakarta-oro...jar is hardly worth mentioning) .
I will watch this thread to see if you or anyone else later comes up with the information to reference external JARs (while in a Java Web Start environment).
So to put it in a question format, can anyone provide some information about referencing external JARs in a normal environment and will it work in a JAWS environment (I do know the technique for specifing and downloading multiple JARs in a JNLP file)?
Hopi(ng)

My original iphone 5 charger has broken, unable to use 3rd party charger has left me with no phone!

I am now left without a phone APPLE, either send me a replacement charger free of charge (Iphone 5 charger shouldnt be breaking due to wear and tear already!) or allow me to use a 3rd party charger as frankly £30 for a replacement charger that broke without being my fault is ridiculous!

Telephone Technical Support: Expired
You are eligible to purchase telephone technical support from an Apple Advisor.
Contact Apple Support
Repairs and Service Coverage: Expired
Our records indicate that your product is not covered under Apple's 1-year limited warranty or AppleCare Protection Plan for hardware repairs and service based on the estimated expiration date.
Learn about Apple's coverage information for your product.
Didnt know iphone 5's were 12 months old! Its been broken for ages! Ive used 3 3rd party chargers already I wish I knew.
My request still stands to apple, i want a replacement.

Can't use 3rd party plug-ins

I've tried to install some third party audio units (from Blue Cat and Digital Fish Pnones) to use in STP 3, but they simply don't show up in the Effects tab. I'm quite sure I've installed them correctly but have I missed something obvious?
Thanks!

This is the Effects tab we're talking about, right?
I downloaded that plugin, and I see that the .dmg had both a mono and a stereo version. Make sure to put both in your components folder. I know that when I removed the stereo version, no plugin showed up in STP. Maybe that's it.
Hope this helps!

How can I use the Intelligent Instrumentation PCI 20001C card with DIAdem 6

I need to update my DIAdem Version 4.00 to 6.02. But there is no driver for my measuring card Intelligent Instrumentation PC20001C that i used with DIAdem 4.00.
What do I need to do?

I am not sure about version 6.02, but your card seems to be supported in version 8.
Check here for a list of supported hardware:
http://www.gfs-ac.de/english/index.htm
Click on 'Supported hardware" on the left in the 'Products - DIAdem" section and then choose your manufacturer on the right side. For II, it shows support for the PCI 20.001C-1 and -2 in version 8.
Let me know if you have any additional questions.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

How do I visually monitor instrumental plug-ins from the SAME computer??

Hello -
My set-up is noted below. Please note that my audio device for my main computer (the Mac Pro) is the _Motu 2408 MK3_.
For larger sequencing projects, I use up to a choice of three slave computers (an aging Dell Precision Workstation, a Receptor and a MacBook Pro). I am happy to say that all works fine with this set up.
I own many instrumental plug-ins for the MacPro (and the slave computers). Most of the instrumental plug-ins in this computer (and the others) are "powered" by Native-Instrument's Kontakt 2 Player or the full version of Kontakt 2.
For the first time, I was experimenting with the MacPro's IAC Driver. So, for example, I was able to get the piano to play using Kontakt 2 OUTSIDE of the Logic program using the IAC Driver. It is very nice to know that I am able to do this. However, I was not able to visually monitor the audio signal from within Logic as I was playing the piano sound from the "external" Kontakt 2 program. So, to clarify my problem, I could hear the piano, but I could not see the audio signal on the audio meter from within Logic.
First, I tried using the Logic's "*External Instrument*" plug-in. That did not work. Second, communicating with the "external" Kontakt 2 program using Logic's midi instrument via the IAC driver, I tried monitoring the audio signal using an Audio Channel from Logic. I Could not figure out how to route the audio signal so that it could be seen by Logic, so that did not work.
I tried seeing if I could somehow configure the 2408 MK3 driver and CueMix Console. Nothing.
So, here is my question (possibly two questions):
1) Is it possible to configure the MOTU 2408 MK3 device so that I can monitor audio signals from within Logic that originate from instrumental plug-ins activated OUTSIDE of Logic?
If yes, then. . .
2) HOW do I configure the MOTU 2408 MK3 device and/or configure Logic so that the audio signals can be monitored? (And so that I can add EQ and audio effects, etc.??)
Thank you in advance. . .
Ted

First, noequplease, THANK YOU very much for taking the time to answer my question. I sincerely appreciate the time and effort that you shared!!!
I need to clarify myself, I guess. These are not "external" synths in the literal sense. Everything is "internal" within the same computer (the MacPro) as the Logic Pro program. These are instrumental plug-ins like the *Kontakt 2 Player* or the *Kontakt 2* (full version). What I've learned how to do is connect to these instrumental software plug-ins external from the Logic Pro program via the IAC Driver. So, it's all "internal" within the computer, just "external" from Logic. (If that makes sense.)
The reason I'm attempting to connect Logic this way is so that I can use more of the 8 GBs of RAM found within my MacPro. So, in other words, I would use the Kontakt 2 Player as an instrumental plug-in within the Logic Pro program and ALSO connect Logic Pro to the "external" *Kontakt 2 Player* (the _stand alone_ plug-in version) via the IAC Driver.
I can communicate with the stand alone version(s) of Kontakt via the IAC driver. Sound is coming out. However, I have yet to figure out a way route the audio signals from the stand alone plug-in to inside Logic.
I suspect that your suggestion of using an external mixer might be the answer (despite using computer-based instrumental plug-ins). I don't think that there's a way of routing the audio signal from a stand alone plug-in to Logic without the use of some kind of mixer. I most probably will need a digital mixer to take advantage of the 2408 MK3's ADAT digital signals to route the signals back into the MacPro. Sadly, I can't afford a digital mixer at this time.
I don't know. . . .
BUT, like I said in my original post, my CURRENT set-up using the "slave" computers works just fine. I'm just trying to figure out a way to make use of all of my MacPro's 8 GBs of RAM. UGH.
Any ideas??

Cisco IOS CA using 3rd Party Certificate

Hi,
Can I use 3rd Party certificate such as verisign, on Cisco IOS CA ? All i can see on cisco.com is self-signed certificate from router.
Thanks
-santo-

Santo,
That's fair enough. A key information to make sure customers understand that a private PKI infrustructure is (for the purpose of deployment such as GETVPN) as secure as provided by third part party.
Private PKI is not based on self signed certificates - only the root CA might need something like it :-)
That being said, for reliability and flexability I really suggest storing CA (ser, CRL, OCSP, backup of public/private keys) files on storage external to the router.
Key takeway is that a properly managed private PKI solution for deployments like DMVPN/GETVPN others is as secure as external 3rd party services (and often time order of magnitude cheaper).
M.

Does any one used 3rd party components like ICEFaces ?

Hi
Thank you for reading my post.
does any one used 3rd party components like ICEFaces components with Creator Studio?
What are other components pack that we can use in Creator?
thanks

OK, thanks to Peter Hanusiak, and Oracle Consulting consultant in Slovakia, I have resolved my issue and I'm hoping that the same solution may apply for you. See below for the instructions from Peter that helped me out. Note that since our applications are different, the specific libraries and locations that you need to confirm compatibility for may be different.
Hope this helps,
Dave
I had similar problem. And in my case it was caused by different ADF from JDev and SOA Suite and SOA order booking demo.
Because I can't test it now, I'll tell just what I remember.
In SOADEMO is somewhere folder SOADEMO-CLIENT\UserInterface\public_html\WEB-INF\lib
where you can find
adf-faces-impl.jar
jsf-impl.jar
Try to find exactly the same libs in Jdev and copy&paste from Jdev to SOADEMO folder. then find the libs in SOASuite, and copy&paste from Jdev to SOA Suite those libs. Restart SOA Suite. Deploy Soademo-Client. And hopefully it will work.

I can't get 3rd party plug-ins to work

I downloade the delirium plug-ins from digidesign (the demo) and when I go to motion to open up the 3rd party plug-ins...nothing is there..I went to preferences and changed it in there...but still no luck...I even renamed the folder "3rd party plug-ins" and went back to preferences and did what the manual said...still no-luck....I was under he impression (from a earlier post), that these plug-ins work with motion as well as after-effects

Heya,
I have Delerium loaded, with no problems. I just keep a folder called "AE Plugs" where I store all my installed plug-ins, and I set the preference in Motion to look at that folder. They show up in the "3rd Party Filters" category in the Library.

Hi, I have recently downloaded a trial version of Ps CC (up until then I have used Ps CS6). All my presets have migrated to the CC version from the CS6 one. However, I can't find any of the plug-ins which I have in CS6, such as Imagenomic Noiseware, Googl

Hi, I have recently downloaded a trial version of Ps CC (I am still using Ps CS6). All my presets have migrated very nicely to the CC version from the CS6 one. However, I can't find any of the plug-ins which I have in CS6, such as Imagenomic Noiseware, Google NIK Collection, etc. in the CC version. How do I "migrate" the plug-ins to Ps CC? I would appreciate some help with this. Thanks

Plug-Ins are not Presets. You need to install Plug-in into CC just like you had to install Plug-ins into CS6.

Using 3rd party binary in script that is run as job

Hi all,
I have several scripts to do various tasks with IIS logs we receive from all our various web servers. One script unzips logs, another logparses to grab a few fields then sftp to a 3rd party for analysis, another will encrypt the original zip files
in prep for ftp to 3rd party, another will ftp to that 3rd party, and yet another will analyse the logs with our in house analytiscs application.
I want to have a master script that will run these other scripts as jobs so that it will control when to start certain scripts based on the state of the jobs. It all seemed to work great as I was setting up test jobs, until I added '3rd' party executables
like 7-zip, ftp.exe, winscp, etc... The jobs would just go to failed state when they hit the executables.
That's not my current problem though as I found out that if I used the
-windowstyle hidden option for start-process then everything ran as expected, that is until I wanted to log output from the 3rd party app. FTP for example.
I tried this:
$ftpexe = "C:\windows\System32\ftp.exe"
$ftpscr="d:\scripts\ftpscrtmp.txt"
"open 111.1.1.1`r`nSomeFTPuser`r`nSomepassword <..bunch of other ftp commands>" | Out-File -FilePath $ftpscr -Append -Encoding "ASCII"
start-process -wait -filepath $ftpexe -argumentlist $ftparglist -RedirectStandardOutput $ftplog -windowstyle hidden
However, asking powershell to redirect output of a hidden window was probably like asking someone to cover their eyes and read a book and it let me know it.
I have tried without using -windowstyle hidden and not having any luck. I want to capture the output of the ftp commands so that I can make sure the file was transferred successfully. If I run the script without -windowstyle hidden and not as
a job it works, and I can test the output. I really want to be able to run this script as a job AND get the output of the ftp to a file... advice?
Thanks in advance!

This works with no problem for me.
Start-Process -wait -filepath ftp.exe -argumentlist '-s:c:\scripts\ftpcmd.txt' -RedirectStandardOutput c:\scripts\ftp.log
I get no window and the file gets written.
This is my ftp command file:
open ftp.microsoft.com
anonymous
[email protected]
ls
bye
¯\_(ツ)_/¯

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

Similar Messages

Maybe you are looking for