Can i use an html signature with mail in SL?

my company uses a standard html signature. is there a way that i can use it with mail app? how do i do that?

you can create a signature in mail preferences->signatures. the editing tools there are very basic but if your company's signature is not too fancy you might be able to recreate it. if that's not good enough, the only way around that i know is a the following hack
create a dummy signature in mail preferences->signatures. then go to the directory /users/username/library/mail/signatures and locate the webarchive with your signature. then make an html file using your favorite html editor. put whatever you need in it. save it and open it in safari. then save it as a webarchive from safari and overwrite the dummy signature you made with that webarchive.

Similar Messages

  • Can you use a gmail account with Mail?

    I read the previous post about the yahoo email account and I was wondering if the same applies for a Gmail account. It is a free account, and I think that set up all of the information right, however I still cannot complete the setup. Maybe i am setting up the POP information wrong, but I'm not sure.
    Thanks

    You must enable POP forwarding for the account preferences via webmail access for the account.
    http://mail.google.com/support/bin/answer.py?answer=13273
    http://www.macosxhints.com/article.php?story=20041110192454841
    The instructions for enabling POP forwarding and creating the account as a POP account with an email client such as the Mail.app are available at Gmail's website.

  • How can I embed an html signature in my mail

    how can I embed an html signature in my mail signatures? I have done it easy with older operating systems, but have no idea with the 10.8.2. Following the olds steps don't work...can't "save as" in the library...that folder isn't even an option

    http://code.coneybeare.net/how-to-make-and-html-signature-in-apple-mail

  • How  we can use forms HTML capabilities with Oracle Applications?

    Hi
    Could not find any specific doc how we can use forms HTML capabilities with Oracle Applications?
    Thanks

    I'm not sure that I understand exactly what you are asking?
    What are you trying to do? If you could give a detailed explanation then we can try and assist.
    Reagrds,
    Bren

  • Can I use Time Machine to retrieve mail that was in Trash on my MacBook Air, after I emptied Trash?

    Can I use Time Machine to retrieve mail that was in Trash on my MacBook Air OS X Yosemite, after I Emptied that Trash?

    Interesting question. I don't think you can because Time Machine would have deleted the data in subsequent backups because it was removed from the computer. But you never know about these things until you actually try it, which I've never done. So, why don't you give it a try. Worst that can happen is it's not there and you're no worse off than now.
    If you need help with restoring mail from Time Machine: Please visit Pondini's Time Machine FAQ for help with all things Time Machine. Also open Mail and select Mail Help from Mail's help menu. Search for 'restore mail' and see if you don't find some instructions there, too.

  • Can I use Java Creator 2 with old JRE/JDK 1.4.2_07??

    I am planning to install new Java Creator 2 but I am having JRE and JDK 1.4.2_07 and I am using mysql 3.23.55 and I want to integrate it.
    Currently my OS is Windows XP SP2 platform with processor Intel Centrino 1.4 and RAM 256 MB... I know the ram is not sufficient and i am planning to upgrade it.. but the problem is can i still remain to use the old JRE and JDK 1.4.2_07 and i am also using mysql 3.23.55... all the driver and engine are out to date but can i still use it and integrate it with java creator 2?
    The questions are:
    1) Can I use Java creator 2 with those old engine?
    2) What java compiler or development tools i can use to develop java standalone application?
    Thank you

    When the jar file is expanded within Eclipse, it shows that the mail.jar file is built with 1.5.0; I think? Here is the header contents of the MANIFEST.MF file, note "Created by."
    Manifest-Version: 1.0
    Implementation-Version: 1.4
    Specification-Title: JavaMail(TM) API Design Specification
    Specification-Version: 1.3
    Implementation-Title: javax.mail
    Extension-Name: javax.mail
    Created-By: 1.5.0 (Sun Microsystems Inc.)
    Implementation-Vendor-Id: com.sun
    Implementation-Vendor: Sun Microsystems, Inc.
    Specification-Vendor: Sun Microsystems, Inc.
    SCCS-ID: @(#)javamail.mf     1.6 05/12/09
    This is causing problems, because anytime I try to use this file, I get signing errors. I have several Web Services built by BAE and Plumtree that are running on 1.4.2; and therefore I am stuck with 1.4.2. I did try to remove the SUN_MICR.* files, thinkning it would resolve the signing issues, but then that caused other problems. I can provide you with code that demonstrates the problem.
    Is there a place where I can get a mail 1.4 jar file built with 1.4.2? that would most likely solve my problems.

  • Using iWeb HTML code with email autoresponder software

    Hi, I'd like to be able to use iWeb html code with an email autoresponder package, however, the text in the resulting emails is unformatted and has no images. My chosen company,AWeber, haven't been able to solve this yet for me (I've tried all the major autoresponder companies with same result).
    I've tried hosting my email page both to Mac.com and www but it makes no difference.
    I've seen similar queries in this forum - has anyone cracked it yet?
    Thanks

    Not sure what you expect. Your URL is absolute and pointing to a local file resource. It's not a proper relative HTML link. Beyond that it's toatlly unclear how you actually plan to load your image and where they are hosted, so nobody can tell you anything. Either way, there is an obviously painful lack of understanding of even the most basic web techniques, so the best advise anyone would give you is to spend some time with a web search and actualyl learn some of that stuff...
    Mylenium

  • Can I get a Read Receipt with Mail, like in Outlook?

    Can I get a Read Receipt with Mail, like in Outlook?
    W.W.

    It is possible, though not through the GUI. And as Dave points out, asking for a receipt does not mean that you will get one. The magic incantations for requesting receipts are detailed, amongst other places, in this article. It requires using the Terminal, and once set affects all messages you send until you unset it again.
    If you search this forum for read receipts (the topic surfaces frequently) you should find a helpful Applescript for turning them on and off, to save using the terminal.
    AK

  • Can I use JavaScript HTML Portlet and PDK Portlets

    Can I use JavaScript HTML Portlet and PDK Portlets?
    My Script works fine with the an HTML portlet but it always gives a an Error Message in the status bar is that normal...
    Other then that I have JavaScript in my PDK portlet page it does not work.. it is the the same javascript I use for in my HTML portlet which works in HTML portlets..

    You'll have to place your JavaScript in the header section of your Portal page. To do so, use HTML/UI templates. For more information, refer to the How to Design and Build Compelling Portal Interfaces whitepaper.
    Good luck,
    Peter

  • Can I use the default "signature properties dialog" in DigSig layer?

    Hello
    I am writing a plug-in about digital signature with the DigSig Layer. I need a  "signature properties dialog" to display info after I verified the signature.
    Now my questions :
    Can I use the default "signature properties dialog" in DigSig layer, just like PubSec's default "signature properties dialog" ?
    If I want to implement my  own "signature properties dialog", what should I do ?
    thanks.

    Thank you so much~
    Actually, it's only an applet for test. I cannot get the error code if I new the KeyPair in install function or Applet construct function. It will return "6A 80" when install the applet.
    And, I found that it support few algorithm. For example, it does not support ALG_DES_MAC4_ISO9797_M2,etc. Is there anything I can do if I want to use the algorithm? Shall I rewrite security package by myself?
    5555, security package is the standard package in JAVACARD API 2.1.1.

  • Can I use Topaz plug ins with PS from the cloud?

    Can I use Topaz plug ins with PS from the cloud?
    Can I use Topaz plug ins with PS from the cloud?

    Your Creative Cloud account allows you to install software on two computers, regardless of operating system. Just log in to Creative Cloud from your second computer and install the app. See http://www.adobe.com/products/creativecloud/faq.html.
    If you opt to do so, your files will be synched between the machines and Creative Cloud itself.
    --- Ben

  • Can't use "Insert addresses" in Yahoo mail.

    I can't use "Insert addresses" in Yahoo mail using Firefox. Nothing happens at all when I click on it. However, I can using Internet Explorer and it also works in Linux so it must be a problem with Firefox only! I have rebooted many times and even started up in "Debugging Mode". No luck so far with anything. Help PLEASE!

    Yahoo may want to make their site work with Firefox. Please contact Yahoo for further assistance. Or check your plug-ins.
    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Can I use the HTML created in Adobe Edge Reflow?

    Can I use the HTML and CSS code generated to create the webpage preview in Adobe Edge Reflow?

    Hi Joseph,
    After creating and saving your Edge Reflow project, you can use View-> Preview In Chrome. This will create your HTML and CSS in your project folder's "assets" directory.  While our goal with this code is to provide a way for you to preview and share your designs in the browser (not to output production quality code), you can do anything you'd like with the output.
    Joan

  • Can I use Xcode 4.x with OS X 10.6.8?

    Can I use Xcode 4.x with OS X 10.6.8?

    efoneil wrote:
    Can I use Xcode 4.x with OS X 10.6.8?
    Yes. I'm running v4.0.2. According to v4.2 release notes,
    You can install Xcode 4.2 for Mac OS X v10.6 Snow Leopard only if you have purchased an earlier release of Xcode.
    <http://developer.apple.com/library/mac/#releasenotes/DeveloperTools/RN-Xcode/_in dex.html>
    (I haven't updated yet -- I guess I should.)

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for