Can I use an IF Statement in a Region Source
Hello, Im using Apex 3.x. I have a standard report page whose Region Source is a simple select statement..... SELECT xyz FROM...WHERE
I need to add an IF statement to this Region Source, but when I do I get an error - Query cannot be parsed within the Builder.
IF :P2_FILTER = 'A' THEN
SELECT abc FROM...WHERE
ELSIF :P2_FILTER = 'B' THEN
SELECT abc FROM...WHERE
END IF;
The columns selected are the same in both scenarios. Is there any way to add an IF statement to the region source?
Thank
you
I guess Scott is suggesting creating 2 regions (with different source query ) , then define the codition for each one. Ex. for region 1 >> condition >> plsql expression >> :P2_FILTER = 'A'
for region 2 >> condition >> plsql expression >> :P2_FILTER = 'B'
Hope this helps,
Sam
Edited by: Sam_06 on Aug 17, 2010 12:20 PM
Similar Messages
-
How can i use one SQL statement to solve problem?
How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET f = SUBSTR(f,
1,
length(f) - 2) || '01'
WHERE substr(f,
-2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET f = SUBSTR(f,
1,
length(f) - 2) ||
DECODE(SUBSTR(f,
-2),
'00',
'01',
SUBSTR(f,
-2)); -
Hi:
Can I use a solid state drive (SSD) with a G4 1 GHz powerbook? If so, how do I do it? Thanks.
fromx001fromx001 I believe you can use a SSD as internal drive, of course make sure to buy an ide/ata. There are all sorts of sizes up to 480 GB also in the ide/ata standard. You should however research carefully your purchase, as the performances of your SSD are going to have to rely on firmware "garbage collection", as the older operating systems haven't been written with SSD in mind.
Mac Man JW: some people depend on Classic as a brody said, other people need a phone modem from time to time, other people use the laptop in harsh environments, and at -15C and below, LCD screens easily crack and break; NOT the powerbook which has hot air towards the screen (and it's a machine that heats quite a lot). My alu Powerbook 12", which was *not* treated with velvet gloves, only once had a cracked screen: a cleaning lady had stepped over it (!!!!) no joke. And in normal / light use today, it is still pretty decent and usable. -
Can I use a Solid state drive in my 21 inch iMac
Can I use a Solid state drive in my 21 inch iMac if so what manufaturer is recommended?
Yes. I have used and recommend OWC's Mercury models and OCZ's Vertex 3 models. They do work in Macs. Depending upon the model you have you should get either 3 Gb/s or 6 Gb/s drive. That will depend upon your computer's disk drive bus support - SATA II or SATA III, respectively.
-
How can I use control break statement in my requirement
Hi ABAPers,
In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month
internal table fields :
audat prdha ipnum netwr
02 abc 1 100
02 abc 2 200
02 xyz 3 300
03 abc 4 100
03 xyz 5 300
03 xyz 6 200
i need output like this:
audat prdha ipnum netwr
02 abc 1,2 300
02 xyz 3 300
03 abc 4 100
03 xyz 5,6 500
Can anyone suggest me logic for this by using control break statements
Thanks in advance,
Ankita
Moderator Message: Duplciate Post.
Edited by: kishan P on Apr 14, 2011 3:03 PMHi ABAPers,
In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month
internal table fields :
audat prdha ipnum netwr
02 abc 1 100
02 abc 2 200
02 xyz 3 300
03 abc 4 100
03 xyz 5 300
03 xyz 6 200
i need output like this:
audat prdha ipnum netwr
02 abc 1,2 300
02 xyz 3 300
03 abc 4 100
03 xyz 5,6 500
Can anyone suggest me logic for this by using control break statements
Thanks in advance,
Ankita
Moderator Message: Duplciate Post.
Edited by: kishan P on Apr 14, 2011 3:03 PM -
How can I use a READ statement for the checking date =sydatum?
Hello,
I need use a READ statement on an internal table ITAB (with feild var1) and check whether feild var1<= sydatum(i.e. var1 greater than or equal to sy-datum)....how can I implement this??
Regards,
Shashank.Hi,
try this short example.
DATA: BEGIN OF ITAB OCCURS 0,
DATE LIKE SY-DATUM,
END OF ITAB.
ITAB-DATE = '20000101'. APPEND ITAB.
ITAB-DATE = '20010101'. APPEND ITAB.
ITAB-DATE = '20020101'. APPEND ITAB.
ITAB-DATE = '20030101'. APPEND ITAB.
ITAB-DATE = '20040101'. APPEND ITAB.
ITAB-DATE = '20050101'. APPEND ITAB.
ITAB-DATE = '20060101'. APPEND ITAB.
ITAB-DATE = '20070101'. APPEND ITAB.
ITAB-DATE = SY-DATUM. APPEND ITAB.
ITAB-DATE = '20080101'. APPEND ITAB.
LOOP AT ITAB WHERE DATE < SY-DATUM.
WRITE: / 'before', ITAB-DATE.
ENDLOOP.
LOOP AT ITAB WHERE DATE = SY-DATUM.
WRITE: / 'equal ', ITAB-DATE.
ENDLOOP.
LOOP AT ITAB WHERE DATE > SY-DATUM.
WRITE: / 'after ', ITAB-DATE.
ENDLOOP.
Regards, Dieter -
Can I use the `deny` statements is a SQL database
I have a web-app that I will need to scale to large proportions. In this web-app, I have a database in which some clients should not have access to specif tables. Can I use `deny` statements on an Azure SQL databases? Like this:
deny select on a_table to a_userHi James,
Yes you can use DENY statements. Please see
this link for more information on the usage of DENY statements.
Thanks
Silvia Doomra -
Can you use nested sql statements in jsp??
HI, I was wondering if you can use nexted sql statements...
example...
<%@ page language="java" contentType="text/html" %>
<%@ page import="java.sql.*" %>
<%@ page import="forum.DataAccess" %>
<%
// Create a new instance of the DataAccess Class
DataAccess d = new DataAccess();
// This call the database connection method from the DataAccess Class
d.ConnectDatabase();
/* This gets the threads from database for the categories */
// This is initilzing the variables
String threadname = null;
int threadid = 0;
// This sets the sql variable to nothing
String sql = "";
String sql1 = "";
// This sets the rs variable to null
ResultSet rs = null;
ResultSet rs1 = null;
// This is doing a SELECT on the thread table based on the category id
sql += "select * from forum_threads where ft_catid = 2";
rs = d.SQLQuery(sql);
/* End of categories */
while (rs.next()){
threadid = rs.getInt("ft_threadid");
threadname = rs.getString("ft_threadname");
sql1 += "select * from forum_messages where fm_catid = 2 and fm_threadid = " + threadid + "";
rs1 = d.SQLQuery(sql1);
%>
THis is the error I get.....
javax.servlet.ServletException: [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
I know what that is.. it is because I am trying to open another result set before the first one is closed... but I need that one open cause I need to loop through the ids and run it against the second query??
Any suggestions...I am not positive but it seems from your error message you will not be able to use the nested SQL. Another option would be to store the values of the ResultSet in a Vector (or Array), and then close your ResultSet and loop through the vector or array instead...
Zac -
How can I use an IF statement in the SELECT
Hi People,
I have a procedure called ENQUEUE_PROC which takes 3 parameters.
and I am trying to use an if statement in the select. I appreciate the help with this task.
here is my code.
Please have a look at my Select statement. What I have does not compile, however it might give you an idea of what i need.
PROCEDURE ENQUEUE_PROC(P_SUBMISSION_ID NUMBER,
P_EVENT VARCHAR2,
CASE_TYPE_CODE NUMBER;
) AS
XMLDATA XMLTYPE;
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message SYS.AQ$_JMS_TEXT_MESSAGE;
BEGIN
SELECT
XMLELEMENT("caseFileEvent", XMLATTRIBUTES('http://www.ussc.gov/soa/casefile/event/types' AS "xmlns",
'http://www.ussc.gov/soa/casefile/event/types' AS "xmlns:ns0"),
XMLELEMENT("caseFileUploadEvent", XMLATTRIBUTES('http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi",
'http://www.ussc.gov/soa/casefile/event/types ../xsd/Case_META.xsd' AS "xsi:schemaLocation",
'http://www.ussc.gov/soa/casefile/event/types' AS "xmlns"),
XMLELEMENT("taskEvent", P_EVENT), --eg - 'SUBMIT', 'REJECT', 'RESUBMIT'
XMLELEMENT("defendentDetails",
XMLELEMENT("sentensingDate", SMD.SENT_VIO_DATE),
XMLELEMENT("personDetails",
// Here is where I want my IF statement, *********************************
IF CASE_TYPE_CODE = 10 THEN
XMLELEMENT("personNameDetails",
XMLELEMENT("firstName", SMD.FIRST_NAME),
XMLELEMENT("middleName", SMD.MIDDLE_NAME),
XMLELEMENT("lastName", SMD.LAST_NAME)
), -- personNameDetails
ELSE
XMLELEMENT("personNameDetails",
XMLELEMENT("corpname", SMD.CORPNAME),
), -- personNameDetails
XMLELEMENT("dateOfBirth", SMD.BIRTH_DATE)
) -- personDetails
), -- defendentDetails
XMLELEMENT("documentStatusDetails",
XMLELEMENT("otherStatus",
XMLELEMENT("intCode", NULL),
XMLELEMENT("description", NULL)
) -- otherStatus
), -- documentStatusDetails
XMLELEMENT("uploadOtherDetails",
XMLELEMENT("submissionId", SUB.SUBMISSION_ID),
XMLELEMENT("submissionSessionId", SUB.SUB_SESSION_ID),
XMLELEMENT("submissionMethod",
XMLELEMENT("intCode", SUB.SUB_MTHD_CODE),
XMLELEMENT("description", SM.DESCRIP)
), -- submissionMethod
XMLELEMENT("submissionReason",
XMLELEMENT("intCode", SUB.SUB_TYPE_CODE),
XMLELEMENT("description", SR.DESCRIP)
), -- submissionReason
XMLELEMENT("district",
XMLELEMENT("intCode", SMD.DIST_ID),
XMLELEMENT("description", D.DISTRICT_NAME)
), -- district
XMLELEMENT("caseFileType",
XMLELEMENT("intCode", SUB.CASE_TYPE_CODE),
XMLELEMENT("description", C.DESCRIP)
), -- caseFileType
XMLELEMENT("primaryDocketInfo",
XMLELEMENT("yearYY", SUBSTR(SMD.DOCKET, 1, 2)),
XMLELEMENT("id", SUBSTR(SMD.DOCKET, 3, 7)),
XMLELEMENT("defendentNumber", SMD.DEF_NUM)
), -- primaryDocketInfo
XMLELEMENT("PACTSId", SMD.PACTS_ID), -- PACTSId
XMLELEMENT("AOJudgeId",
XMLELEMENT("intCode", SMD.AO_JUDGE_ID),
XMLELEMENT("description", J.LAST_NAME || ', ' || J.FIRST_NAME || ', ' || J.MIDDLE_NAME)
), -- AOJudgeId
XMLELEMENT("missingCasefile", SUB.MISSING_CASE), -- missingCasefile
XMLELEMENT("creator",
XMLELEMENT("firstName", NULL),
XMLELEMENT("lastName", NULL),
XMLELEMENT("email", SUB.CREATOR_ID),
XMLELEMENT("actionDate", REGEXP_REPLACE( TO_CHAR(SUB.CREATE_TIME, 'YYYY-MM-DD"T"HH24:MI:SS.FFTZR'), '...(......)$', '\1'))
), -- creator
XMLELEMENT("lastModifier",
XMLELEMENT("firstName", NULL),
XMLELEMENT("lastName", NULL),
XMLELEMENT("email", H.USER_ID),
XMLELEMENT("actionDate", TO_CHAR(H.ACTION_DATE, 'YYYY-MM-DD"T"HH24:MI:SS".000-05:00"'))
) -- lastModifier
) -- uploadOtherDetails
) -- caseFileUploadEvent
) -- caseFileEvent
INTO XMLDATA
FROM USSC_CASES.SUBMISSION SUB,
USSC_CASES.SUBMISSION_METADATA SMD,
USSC_CASES.CASE_HISTORY H,
LOOKUP.CASE_SUB_MTHD SM,
LOOKUP.CASE_SUB_TYPE SR,
LOOKUP.DISTRICTS D,
LOOKUP.JUDGES J,
LOOKUP.CASE_TYPES C
WHERE SUB.SUBMISSION_ID = SMD.SUBMISSION_ID
AND SUB.SUBMISSION_ID = H.SUBMISSION_ID
AND SUB.SUB_MTHD_CODE = SM.SUBMTHD_CODE
AND SUB.SUB_TYPE_CODE = SR.SUBTYPE_CODE
AND SUB.CASE_TYPE_CODE = C.CASE_TYPE_CODE
AND SMD.DIST_ID = D.USSC_DISTRICT_ID
AND SMD.AO_JUDGE_ID = J.AO_JUDGE_ID
AND H.ACTION_DATE IN (SELECT MAX(A.ACTION_DATE)
FROM USSC_CASES.CASE_HISTORY A
WHERE A.SUBMISSION_ID = P_SUBMISSION_ID)
AND SUB.SUBMISSION_ID = P_SUBMISSION_ID;
--dbms_output.put_line('queue start '|| xmldata.getclobval());
--insert into test1 values(xmldata);
message := SYS.AQ$_JMS_TEXT_MESSAGE.construct;
message.set_text(xmldata.getStringVal());
DBMS_AQ.ENQUEUE(queue_name => 'case_file_queue', -- aqadm.cases_queue
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
COMMIT;
END ENQUEUE_PROC;thanks for the help,
I believe I almost got it to compilw, however I am getting Error(29,19): PL/SQL: ORA-00918: column ambiguously defined.
Of course CASE_TYPE_CODE is ambiguously because its passed in, is there a way around this.
Here is what i have so far.
PROCEDURE ENQUEUE_PROC(P_SUBMISSION_ID NUMBER,
P_EVENT VARCHAR2,
CASE_TYPE_CODE NUMBER // passed in field
) AS
XMLDATA XMLTYPE;
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message SYS.AQ$_JMS_TEXT_MESSAGE;
BEGIN
SELECT
XMLELEMENT("caseFileEvent", XMLATTRIBUTES('http://www.ussc.gov/soa/casefile/event/types' AS "xmlns",
'http://www.ussc.gov/soa/casefile/event/types' AS "xmlns:ns0"),
XMLELEMENT("caseFileUploadEvent", XMLATTRIBUTES('http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi",
'http://www.ussc.gov/soa/casefile/event/types ../xsd/Case_META.xsd' AS "xsi:schemaLocation",
'http://www.ussc.gov/soa/casefile/event/types' AS "xmlns"),
XMLELEMENT("taskEvent", P_EVENT), --eg - 'SUBMIT', 'REJECT', 'RESUBMIT'
XMLELEMENT("defendentDetails",
XMLELEMENT("sentensingDate", SMD.SENT_VIO_DATE),
CASE
WHEN CASE_TYPE_CODE = 10 THEN
XMLELEMENT("personDetails",
XMLELEMENT("personNameDetails",
XMLELEMENT("firstName", SMD.FIRST_NAME),
XMLELEMENT("middleName", SMD.MIDDLE_NAME),
XMLELEMENT("lastName", SMD.LAST_NAME)
), -- personNameDetails
XMLELEMENT("dateOfBirth", SMD.BIRTH_DATE)
) -- personDetails
ELSE
XMLELEMENT("corporationDetails",
XMLELEMENT("organizationName", SMD.CORP_NAME)
) -- corporationDetails
END
), -- defendentDetails
XMLELEMENT("documentStatusDetails",
XMLELEMENT("otherStatus",
XMLELEMENT("intCode", NULL),
XMLELEMENT("description", NULL)
) -- otherStatus
), -- documentStatusDetails
XMLELEMENT("uploadOtherDetails",
XMLELEMENT("submissionId", SUB.SUBMISSION_ID),
XMLELEMENT("submissionSessionId", SUB.SUB_SESSION_ID),
XMLELEMENT("submissionMethod",
XMLELEMENT("intCode", SUB.SUB_MTHD_CODE),
XMLELEMENT("description", SM.DESCRIP)
), -- submissionMethod
XMLELEMENT("submissionReason",
XMLELEMENT("intCode", SUB.SUB_TYPE_CODE),
XMLELEMENT("description", SR.DESCRIP)
), -- submissionReason
XMLELEMENT("district",
XMLELEMENT("intCode", SMD.DIST_ID),
XMLELEMENT("description", D.DISTRICT_NAME)
), -- district
XMLELEMENT("caseFileType",
XMLELEMENT("intCode", SUB.CASE_TYPE_CODE),
XMLELEMENT("description", C.DESCRIP)
), -- caseFileType
XMLELEMENT("primaryDocketInfo",
XMLELEMENT("yearYY", SUBSTR(SMD.DOCKET, 1, 2)),
XMLELEMENT("id", SUBSTR(SMD.DOCKET, 3, 7)),
XMLELEMENT("defendentNumber", SMD.DEF_NUM)
), -- primaryDocketInfo
XMLELEMENT("PACTSId", SMD.PACTS_ID), -- PACTSId
XMLELEMENT("AOJudgeId",
XMLELEMENT("intCode", SMD.AO_JUDGE_ID),
XMLELEMENT("description", J.LAST_NAME || ', ' || J.FIRST_NAME || ', ' || J.MIDDLE_NAME)
), -- AOJudgeId
XMLELEMENT("missingCasefile", SUB.MISSING_CASE), -- missingCasefile
XMLELEMENT("creator",
XMLELEMENT("firstName", NULL),
XMLELEMENT("lastName", NULL),
XMLELEMENT("email", SUB.CREATOR_ID),
XMLELEMENT("actionDate", REGEXP_REPLACE( TO_CHAR(SUB.CREATE_TIME, 'YYYY-MM-DD"T"HH24:MI:SS.FFTZR'), '...(......)$', '\1'))
), -- creator
XMLELEMENT("lastModifier",
XMLELEMENT("firstName", NULL),
XMLELEMENT("lastName", NULL),
XMLELEMENT("email", H.USER_ID),
XMLELEMENT("actionDate", TO_CHAR(H.ACTION_DATE, 'YYYY-MM-DD"T"HH24:MI:SS".000-05:00"'))
) -- lastModifier
) -- uploadOtherDetails
) -- caseFileUploadEvent
) -- caseFileEvent
INTO XMLDATA
FROM USSC_CASES.SUBMISSION SUB,
USSC_CASES.SUBMISSION_METADATA SMD,
USSC_CASES.CASE_HISTORY H,
LOOKUP.CASE_SUB_MTHD SM,
LOOKUP.CASE_SUB_TYPE SR,
LOOKUP.DISTRICTS D,
LOOKUP.JUDGES J,
LOOKUP.CASE_TYPES C
WHERE SUB.SUBMISSION_ID = SMD.SUBMISSION_ID
AND SUB.SUBMISSION_ID = H.SUBMISSION_ID
AND SUB.SUB_MTHD_CODE = SM.SUBMTHD_CODE
AND SUB.SUB_TYPE_CODE = SR.SUBTYPE_CODE
AND SUB.CASE_TYPE_CODE = C.CASE_TYPE_CODE
AND SMD.DIST_ID = D.USSC_DISTRICT_ID
AND SMD.AO_JUDGE_ID = J.AO_JUDGE_ID
AND H.ACTION_DATE IN (SELECT MAX(A.ACTION_DATE)
FROM USSC_CASES.CASE_HISTORY A
WHERE A.SUBMISSION_ID = P_SUBMISSION_ID)
AND SUB.SUBMISSION_ID = P_SUBMISSION_ID;
--dbms_output.put_line('queue start '|| xmldata.getclobval());
--insert into test1 values(xmldata);
message := SYS.AQ$_JMS_TEXT_MESSAGE.construct;
message.set_text(xmldata.getStringVal());
DBMS_AQ.ENQUEUE(queue_name => 'case_file_queue', -- aqadm.cases_queue
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
COMMIT;
END ENQUEUE_PROC;Edited by: Rooney on Jan 31, 2012 1:55 PM -
Can't use SecKeyRef and similar functions, when "Compile sources as" is set to "Objective c "
Hi, need to access SecKeyRef funcion and some other similar ones, but i can't access them, when my compiler option "Compile sources as" is set to "Objective c++". When it is set to "According to a file type", i dont get any errors with those funcions, but my old code starts to get errors. What should i do? I have tryed everything and still no luck...
I'm using xcode 4,6 and app is for iOS6.I got my problem fixed. I was getting errors, with some failas that were importing <cmath><limits> etc. I renamed their extensions to .mm and set compile sources as to "According to a file type".
Now wait a second. So if my apps target is iOS6.1 , apple will no longer accept my app? I didn't heard nothing about it... -
Can I use Calendar "Groups" or views as data sources in PDA Sync?
From what I can see, you can only use calendars that you are subscibed to and not calendar groups/views that you have created.
As I understand it you can choose to view them individually or combined.
When I bought my iPhone and mobileMe I was told to sync to exchange account first as doing it after may delete my other accounts data. -
Using CASE WHEN THEN in dynamic Region Source area
Hi all,
I've been knocking my head around on this one for a while. Hope someone can show me some guidance. So far, the SQL Query in the Region Source works ok except after the THEN ''||'LINK'||'' . All text between the single quotes displays, and not just the hyperlink LINK. (My goal is to this simple test working, then go back an substitute in APP_ID, Page#, SESSION variables.) But I'm stuck with this problem. Searched the forum but this is as far as I got. Below is the code I'm using in the Region Source area. Perhaps a region attribute setting is needed but I'm unsure. Thanks for any assistance. -Mike
select DISTINCT
AWARD,
CASE
WHEN WINNER_NAME = 'India Retail Support Team'
THEN '<A HREF="http://www.hotmail.com">'||'LINK'||'</A>' *----------------HREF link (LINK) is working fine here but doesn't work ok in Region Source.
ELSE WINNER_NAME
END WN,
GBU_WINNER,
DORDER
from GBUSERVICEPACESETTERAWARDS
where FY = '2012'
and TYPE = 'Service Award'>
As previously requested, please update your forum profile with a real handle instead of "user10734329".
I've been knocking my head around on this one for a while. Hope someone can show me some guidance. So far, the SQL Query in the Region Source works ok except after the THEN ''||'LINK'||'' . All text between the single quotes displays, and not just the hyperlink LINK.Not clear from this what the problem is. It appears to me that LINK is all of the "text between the single quotes". What do you mean by "all text"? (An example on apex.oracle.com is a good way to resolve such ambiguities...)
The usual cause of unexpected results when the separation of concerns is breached and HTML is directly generated in report queries is having the Display Text As report column attribute wrongly set. Ensure it is Standard Report Column rather than the default Display as Text (escape special characters). -
Use a static file as HTML region source
Hi All,
Sorry for maybe trivial question, but is there a way to use static files as HTML region source? The files are simple enough but have to be translated so we'd rather keep them as static files, rather than paste them in multiple region sources to display conditionally.
I tried something like
<embed src="#WORKSPACE_IMAGES#&FSP_LANGUAGE_PREFERENCE.file01.txt" >
This however is showing the HTML source on screen and not rendering it as html.
The other option I tried is creating an URL region that would get the content from the same server, e.g.:
http://localhost:9080/apex/wwv_flow_file_mgr.get_file?p_security_group_id=4874627831984398&p_fname=en_file01.txt
... but I'm running against an access control list (ACL) error. The file opens when one loads the link directly in a browser but localhost apparently is not allowed in ACL and I would not have sysdba access where I deploy.
finally I saw recommendation to use an iframe in a similar discussion to display pdf file here Display PDF in Apex Region land tried
<iframe src="#WORKSPACE_IMAGES#&FSP_LANGUAGE_PREFERENCE.file01.txt&embedded=true" style="" ></iframe>
but receive "Not found
The requested URL /apex/wwv_flow_file_mgr.get_file was not found on this server" as if the file name is not received at all? Same name is parsed correctly in the embed tag.
Please help
AtanasHello Atanas,
>> the shortcuts text does not get into the translations …
Just so you know, and for future reference, the shortcuts of type Message are fully translatable (as mentioned in the documentation Jari pointed out to you).
Regards,
Arie.
♦ Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
♦ Author of Oracle Application Express 3.2 – The Essentials and More -
How can we use IF ELSE statement in Header Section
Hi All
I have requirement to display a bill address in header section based on a particular status ,would some body please share that is it possible to use if else in header section .
Thanks in advance
Thanks
Pratapyou cannot place your if conditions within form fields in the Word header. But you can directly type the tags instead.
Regards
Nishka -
Can I use a Solid State Drive (SSD) as a startup disk
My System Drive just crashed. So I need a new unit. I would like to get away from a mechanical unit so I was thinking that a SSD would be nice.
Will my Powermac G4 (867 mhz) running Mac OS 9.2.2 let me install and run the SSD as a startup drive?
GaryI have never used a SSD but I do have G4s with SATA cards - they work well but do not support booting.
My advice is to ensure that you buy a SSD which will work in your G4 and allow booting. This will probably involve an IDE or SATA SSD controller specified as allowing booting.
Maybe you are looking for
-
Having trouble when I go to configure sync...
I go to try to set which applications to sync after clicking two way an erro message comes up and kicks me out the error message says Intellisync:the operation terminated unexpectedly
-
Character encoding issue in sql server
Hi Team, We have a table with more than 20 columns...In that we have some columns which will have data extracted from the Datawareshouse applicances and its one time load. The problem is we have two columns which will may have same set of values from
-
JButton not visible after use of Jpanel removeAll ..
Hi! I'm having a calculator class that inherits JFrame. I need to add more buttons after setting an option from the (view) menu bar .. (from normal to scientific calculator). I needed to use the JPanel removeAll method and then add the normal buttons
-
WEBGATES 3.3.2 gcc libraries requirement during the installation problem
Have Linux 5.2, 32 bit machine installing webgates 11.1.13 Oracle requires libgcc_s.so.1 libstdc++.so.5 version 3.3.2 installl When looking http://gcc.gnu.org/ - they have old vesrion 3 gcc-3.2.tar.bz2 - is it what needs to be used? When building the
-
How to default ECL viewer 6.0 options
When you click options button in ECL viewer, under the toolbar tab, you can tick: [ ] First Page [ ] Previous Page [ ] Next Page [ ] Last Page After ticked, the button will shown on the screen. The problem is I need to do these settings in very PC, i