Using CASE WHEN THEN in dynamic Region Source area
Hi all,
I've been knocking my head around on this one for a while. Hope someone can show me some guidance. So far, the SQL Query in the Region Source works ok except after the THEN ''||'LINK'||'' . All text between the single quotes displays, and not just the hyperlink LINK. (My goal is to this simple test working, then go back an substitute in APP_ID, Page#, SESSION variables.) But I'm stuck with this problem. Searched the forum but this is as far as I got. Below is the code I'm using in the Region Source area. Perhaps a region attribute setting is needed but I'm unsure. Thanks for any assistance. -Mike
select DISTINCT
AWARD,
CASE
WHEN WINNER_NAME = 'India Retail Support Team'
THEN '<A HREF="http://www.hotmail.com">'||'LINK'||'</A>' *----------------HREF link (LINK) is working fine here but doesn't work ok in Region Source.
ELSE WINNER_NAME
END WN,
GBU_WINNER,
DORDER
from GBUSERVICEPACESETTERAWARDS
where FY = '2012'
and TYPE = 'Service Award'
>
As previously requested, please update your forum profile with a real handle instead of "user10734329".
I've been knocking my head around on this one for a while. Hope someone can show me some guidance. So far, the SQL Query in the Region Source works ok except after the THEN ''||'LINK'||'' . All text between the single quotes displays, and not just the hyperlink LINK.Not clear from this what the problem is. It appears to me that LINK is all of the "text between the single quotes". What do you mean by "all text"? (An example on apex.oracle.com is a good way to resolve such ambiguities...)
The usual cause of unexpected results when the separation of concerns is breached and HTML is directly generated in report queries is having the Display Text As report column attribute wrongly set. Ensure it is Standard Report Column rather than the default Display as Text (escape special characters).
Similar Messages
-
I have a situation where i need to write a case when sql expression to fetch certain rows from a table.
How to use CASE WHEN THEN ELSE END in a report query ?
Explanation with a simple example will be of great help.
thanksThe javadoc for oracle.toplink.expressions.Expression
contains some information.
The following is an example of how to build the case statement.
This will use case to replace the keys in the caseTable with the values. The default value (the ELSE) is provided as the second argument.
Hashtable caseTable = new Hashtable(3);
caseTable.put("Bob", "Bobby");
caseTable.put("Susan", "Susie");
caseTable.put("Eldrick", "Tiger");
Expression expression = builder.get("firstName").caseStatement(caseTable, "No-Nickname").equal("Bobby"); -
Hello everyone,
We have a function return Y or N.
We have 2 table YTable YT and NTable NT.
We are using UNION now.
SELECT ONE.CL1
FROM (
SELECT CL1Y FROM YTable WHERE FUNCTION = 'Y'
UNION
SELECT CL1N FROM NTable WHERE FUNCTION = 'N') ONEWe are wondering to use CASE, WHEN, THEN, END.
Is it possible or NOT?
If you have a chance, please share your experiences.
Thanks in advance,
NY
P.S.
If you have more questions, please let us know.
Edited by: New Yorker on Aug 31, 2010 10:08 AMNew Yorker,
According to the given SQL block, the case function can not be used. You can use the case function with multiple table joins but you can only use the CASE WHEN ELSE END block for one column.
If i got your question correct, that is my answer to your question.
Regards.
Ogan -
In my database, two variable ID and time (varchar2) are there. I want to populate another variable using case when then by putting below conditon to convert like this
But its not working. Can anyone help me
if time =1 day then '1 Day'
time > 2 days and time <=7 days then '2 to 7 days'
time > 8 days and time <=15 days then '8 to 15 days'
else 'not matching'
ID Time
12 1 days
23 244 days
12 2 days
14 4 days
15 6 days
17 9 days
select time,
case WHEN
UPPER(Time) = '1 DAY'
THEN
'1 day'
WHEN
UPPER(Time) Between '2 DAYS' and '7 DAYS'
THEN
'2 to 7 days'
WHEN
UPPER(Time) Between '8 DAYS' and '15 DAYS'
THEN
'8 to 15 days'
ELSE
'Not matching'
END "update time"
from table1900487 wrote:
In my database, two variable ID and time (varchar2) are there. If you are storing Days in a column store it as NUMBER or INTERVAL data type. The way you have stored the value looks incorrect.
What you can do is extract the number portion of your time column and apply the CASE statement. Something like this
SQL> with t
2 as
3 (
4 select 12 id, '1 days' time1 from dual union all
5 select 23 id, '244 days' time1 from dual union all
6 select 12 id, '2 days' time1 from dual union all
7 select 14 id, '4 days' time1 from dual union all
8 select 15 id, '6 days' time1 from dual union all
9 select 17 id, '9 days' time1 from dual
10 )
11 select id,
12 time1,
13 case when time1 = 1 then '1 day'
14 when time1 between 2 and 7 then '2 to 7 days'
15 when time1 between 8 and 15 then '8 to 15 days'
16 else 'not matching'
17 end "update time"
18 from (
19 select id, to_number(regexp_substr(time1, '^[[:digit:]]*')) time1
20 from t
21 )
22 /
ID TIME1 update time
12 1 1 day
23 244 not matching
12 2 2 to 7 days
14 4 2 to 7 days
15 6 2 to 7 days
17 9 8 to 15 days
6 rows selected. -
Using case when statement or decode stament in where clause
hi gems..
i have a problem in the following query..
i am trying to use case when statement in the where clause of a select query.
select cr.customer_name || ' - ' ||cr.customer_number as cust_name,
cr.salary as salary
from customer_details cr
where (case when '>' = '>' then 'cr.salary > 5000'
when '>' = '<' then 'cr.salary < 5000'
when '>' = '=' then 'cr.salary = 5000'
else null
end);
the expression in the when clause of the case-when statement will come from UI and depending on the choice i need to make the where clause.
thats why for running the query, i have put '>' in that place.
so the original query will look like this(for your reference):
select cr.customer_name || ' - ' ||cr.customer_number as cust_name,
cr.salary as salary
from customer_details cr
where (case when variable = '>' then 'cr.salary > 5000'
when variable = '<' then 'cr.salary < 5000'
when variable = '=' then 'cr.salary = 5000'
else null
end);
so, in actual case,if the user selects '>' then the filter will be "where cr.salary > 5000"
if the user selects '<' then the filter will be "where cr.salary < 5000"
if the user selects '=' then the filter will be "where cr.salary = 5000"
but i am getting the error "ORA 00920:invalid relational operator"
please help..thanks in advance..Hi,
select cr.customer_name || ' - ' ||cr.customer_number as cust_name,
cr.salary as salary
from customer_details cr
where ( v_variable = 'bigger'
and cr.salary > 5000
or ( v_variable = 'less'
and cr.salary < 5000
or ( v_variable = 'eq'
and cr.salary = 5000
)Edited by: user6806750 on 22.12.2011 14:56
For some reason I can't write in sql '<', '>', '=' -
How to use case when statements in ODI
I need to put conditional logic before DVM look up in ODI. In the expression editor I put the following statement:-
CASE WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='RCS' THEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME=EBIZ_CELL.CELL_DATA
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='FDC' THEN CONCAT(POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME,POC_JOURNAL_TEMP_SOURCE_TBL.BOOK_CODE)=EBIZ_CELL.CELL_DATA
END
It did not work,
Under Operators ->All Executions, found the error:-
905 : 42000 : java.sql.SQLException: ORA-00905: missing keyword
The description in Session Task contained:-
select
C1_JOURNAL_TEMPL
from APPS.POC_JOURNAL_TEMP_SOURCE_TBL POC_JOURNAL_TEMP_SOURCE_TBL, APPS.C$_0POC_JOURNAL_TEMP_TARGET_TB
where
(1=1)
And (CASE
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='RCS'
THEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME=C2_CELL_DATA
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='FDC'
THEN CONCAT(POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME,POC_JOURNAL_TEMP_SOURCE_TBL.BOOK_CODE)=C2_CELL_DATA
END)
Checked the above code in PL/SQL Developer but it gave errors.
In PL/SQL developer tried to check a simple query using case-when but even that is giving errors in the case-when portion.
The query is as follows:-
select phase_code, accounting_period, sum(eff_cc) as BD_Eff_QTD
from prj_detail
where
case POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME
when 'EXT'
then
1
when 'RAC'
then
2
when 'XXX'
then
3
else
end
I would like to know what is wrong with the above code.
Please let me know what is the correct way of using case-when in PL/SQL as well as in ODI.Your ODI case statement and PL/SQL Case statement both looks confusing.
You are writing case statement under where clause which is not a good practise. If you want to implement logic like-
select a,b,c from <table>
where
when cond^n^ 1 then do 1
when cond^n^ 2 then do 2
then better you seperate your query for each filter and do a union, in other words-
select a,b,c from <table>
where cond^n^ 1
union
select a,b,c from <table>
where cond^n^ 2
If you are writing case staement to retrieve a value/column (EBIZ_CELL.CELL_DATA) then no need to include it under filter.
ODI case for column EBIZ_CELL.CELL_DATA will be:
CASE
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='RCS'
THEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME
WHEN POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME='FDC'
THEN CONCAT(POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME,POC_JOURNAL_TEMP_SOURCE_TBL.BOOK_CODE)
END
Pl/SQL query-
select phase_code, accounting_period,
case POC_JOURNAL_TEMP_SOURCE_TBL.APPLICATION_NAME
when 'EXT'then 1
when 'RAC' then 2
when 'XXX' then 3
else 'default value' --- (if no else needed then can also remove else part)
end,
sum(eff_cc) as BD_Eff_QTD
from prj_detail
Suggested as per what is understood, hope it helps.
Edited by: 939451 on Jul 5, 2012 12:47 AM
Edited by: 939451 on Jul 5, 2012 12:48 AM -
How to use case when in Select qry?
Hi Friends,
I want to use Case when in Select qry, my situation is like this
SELECT bmatnr blgort bj_3asiz bmat_kdauf b~mat_kdpos
SUM( ( case when bshkzg = 'S' then bmenge else 0 END ) -
( case when bshkzg = 'H' then bmenge else 0 END ) ) AS qty
INTO corresponding fields of table it_projsal
FROM mseg AS b
INNER JOIN mkpf AS a ON bmblnr = amblnr
AND bmandt = amandt
WHERE abudat < '20061201' AND blgort IN ('1050')
and b~mandt = '350'
GROUP BY bmatnr bj_3asiz bmat_kdauf bmat_kdpos b~lgor
If we give like this it gives an error.
Please help me, how to use or handle in select qry itself.
Regards
Shankarthis is not a way to select data from the DB tables.
first get all the data from the DB tables then u have to do SUM Ups .
Regards
prabhu -
Update multiple rows using CASE WHEN
I have the table ACCOUNT of structure as follow:
ACCOUNT_ID
ACCOUNT_STATUS
004460721
2
042056291
5
601272065
3
I need to update the three rows at once using one SELECT statement such that, the second column will be 5, 3, 2 respectively.
I used the following query but seems there is something missing
UPDATE ACCOUNT
SET ACCOUNT_STATUS = CASE
WHEN ACCOUNT_STATUS = '004460721' THEN 5
WHEN ACCOUNT_STATUS = '042056291' THEN 3
WHEN ACCOUNT_STATUS = '601272065' THEN 2
WHERE ACCOUNT_ID IN ('004460721','042056291','601272065')
My question, is this way correct? if no, can I use CASE WHEN statement and how or I only have choice of using SUB-SELECT to acheive that in one statement?Hi,
Hawk333 wrote:
I have the table ACCOUNT of structure as follow:
ACCOUNT_ID
ACCOUNT_STATUS
004460721
2
042056291
5
601272065
3
I need to update the three rows at once using one SELECT statement such that, the second column will be 5, 3, 2 respectively.
I used the following query but seems there is something missing
UPDATE ACCOUNT
SET ACCOUNT_STATUS = CASE
WHEN ACCOUNT_STATUS = '004460721' THEN 5
WHEN ACCOUNT_STATUS = '042056291' THEN 3
WHEN ACCOUNT_STATUS = '601272065' THEN 2
WHERE ACCOUNT_ID IN ('004460721','042056291','601272065')
My question, is this way correct? if no, can I use CASE WHEN statement and how or I only have choice of using SUB-SELECT to acheive that in one statement?
What happens when you try it?
Did you mean "WHEN ACCOUNT_ID = ..."?
A CASE expressions always needs an END keyword.
Depending on your requirements (that is, why are those rows being changed, and how do you determine the new values) a CASE expression in an UPDATE statement, similar to what you posted, could be a good way to do it. MERGE (instead of UPDATE) would also be an option, especially if you want to avoid updating rows that already happen to have the correct values. -
hello ,
i wanna use "case when" statement in the insert , i implement it like this :
currentyear:=1;
insert into test1 (ATTRIB1,ATTRIB2) values ((case when currentyear=1 then 'ok' else 'notOK' end),'val2' );
but it didn't work, i got this error :
ORA-14551: cannot perform a DML operation inside a query
Regards
Elyes
Edited by: user10393090 on 5 janv. 2009 03:32Better approach is ->
insert into test1 (ATTRIB1,ATTRIB2)
select case
when ¤tyear=1 then
'ok'
else
'notOK'
end AS attrib1,
'val2' AS attrib2
from dual;N.B.: Not Tested...
Regards.
Satyaki De. -
How to use case when function to calculate time ?
Dear All,
May i know how to use case when function to calculate the time ?
for the example , if the First_EP_scan_time is 12.30, then must minus 30 min.
CASE WHEN FIRSTSCAN.EP_SHIFT <> 'R1' AND FIRSTSCAN.EP_SHIFT <> 'R2'
THEN ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF((CASE WHEN SHIFTCAL.EP_SHIFT = 'N1'
THEN CONVERT(VARCHAR(8),DATEADD(DAY,+1,LEFT(FIRSTSCAN.EP_SCAN_DATE ,8)),112) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','')
ELSE LEFT(FIRSTSCAN.EP_SCAN_DATE ,8) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','') END),12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0 - 0.25) AS FLOAT),2)
ELSE ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF(FIRSTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0) AS FLOAT),2) END AS OTWORK_HOURDo not use computations in a declarative language. This is SQL and not COBOL.
Use a table of time slots set to one more decimal second of precision than your data. You can now use temporal math to add it to a DATE to TIME(1) get a full DATETIME2(0). Here is the basic skeleton.
CREATE TABLE Timeslots
(slot_start_time TIME(1) NOT NULL PRIMARY KEY,
slot_end_time TIME(1) NOT NULL,
CHECK (start_time < end_time));
INSERT INTO Timeslots --15 min intervals
VALUES ('00:00:00.0', '00:14:59.9'),
('00:15:00.0', '00:29:59.9'),
('00:30:00.0', '00:44:59.9'),
('00:45:00.0', '01:00:59.9'),
('23:45:00.0', '23:59:59.9');
Here is the basic query for rounding down to a time slot.
SELECT CAST (@in_timestamp AS DATE), T.start_time
FROM Timeslots AS T
WHERE CAST (@in_timestamp AS TIME)
BETWEEN T.slot_start_time
AND T.slot_end_time;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Case-when-then logic in join condition
Is it possible to implement case when then logic in join condition?
Instead of:
INGRP1.COL1 = INGRP2.COL1 (+)
something like:
case
when INGRP1.COL2 IS NULL
then INGRP1.COL1 = INGRP2.COL1 (+)
else INGRP1.COL3 = INGRP2.COL3 (+)
end
expression builder for join condition.
Any help much appreciated.Hi Kaiser,
this is my variant
1) join first table with second table twice (define two input group in join, include second table in mapping twice and map them to appropriate join group)
INGRP1.COL1=INGRP2.COL1(+) and INGRP1.COL3=INGRP3.COL3(+)
2) after join calculate attributes from second table with expression like
case when COL2 IS NULL the INGRP2_ATTR else INGRP3_ATTR end
Maybe anyone has a better solution...
Regards,
Oleg -
Using case when statement in the select query to create physical table
Hello,
I have a requirement where in I have to execute a case when statement with a session variable while creating a physical table using a select query. let me explain with an example.
I have a physical table based on a select table with one column.
SELECT 'VALUEOF(NQ_SESSION.NAME_PARAMETER)' AS NAME_PARAMETER FROM DUAL. Let me call this table as the NAME_PARAMETER table.
I also have a customer table.
In my dashboard that has two pages, Page 1 contains a table with the customer table with column navigation to my second dashboard page.
In my second dashboard page I created a dashboard report based on NAME_PARAMETER table and a prompt based on customer table that sets the NAME_ PARAMETER request variable.
EXECUTION
When i click on a particular customer, the prompt sets the variable NAME_PARAMETER and the NAME_PARAMETER table shows the appropriate customer.
everything works as expected. YE!!
Now i created another table called NAME_PARAMETER1 with a little modification to the earlier table. the query is as follows.
SELECT CASE WHEN 'VALUEOF(NQ_SESSION.NAME_PARAMETER)'='Customer 1' THEN 'TEST_MART1' ELSE TEST_MART2' END AS NAME_PARAMETER
FROM DUAL
Now I pull in this table into the second dashboard page along with the NAME_PARAMETER table report.
surprisingly, NAME_PARAMETER table report executes as is, but the other report based on the NAME_PARAMETER1 table fails with the following error.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1756 message: [Oracle][ODBC][Ora]ORA-01756: quoted string not properly terminated. [nQSError: 16014] SQL statement preparation failed. (HY000)
SQL Issued: SET VARIABLE NAME_PARAMETER='Novartis';SELECT NAME_PARAMETER.NAME_PARAMETER saw_0 FROM POC_ONE_DOT_TWO ORDER BY saw_0
If anyone has any explanation to this error and how we can achieve the same, please help.
Thanks.Hello,
Updates :) sorry.. the error was a stupid one.. I resolved and I got stuck at my next step.
I am creating a physical table using a select query. But I am trying to obtain the name of the table dynamically.
Here is what I am trying to do. the select query of the physical table is as follows.
SELECT CUSTOMER_ID AS CUSTOMER_ID, CUSTOMER_NAME AS CUSTOMER_NAME FROM 'VALUEOF(NQ_SESSION.SCHEMA_NAME)'.CUSTOMER.
The idea behind this is to obtain the data from the same table from different schemas dynamically based on what a session variable. Please let me know if there is a way to achieve this, if not please let me know if this can be achieved in any other method in OBIEE.
Thanks. -
Can I use an IF Statement in a Region Source
Hello, Im using Apex 3.x. I have a standard report page whose Region Source is a simple select statement..... SELECT xyz FROM...WHERE
I need to add an IF statement to this Region Source, but when I do I get an error - Query cannot be parsed within the Builder.
IF :P2_FILTER = 'A' THEN
SELECT abc FROM...WHERE
ELSIF :P2_FILTER = 'B' THEN
SELECT abc FROM...WHERE
END IF;
The columns selected are the same in both scenarios. Is there any way to add an IF statement to the region source?
Thank
youI guess Scott is suggesting creating 2 regions (with different source query ) , then define the codition for each one. Ex. for region 1 >> condition >> plsql expression >> :P2_FILTER = 'A'
for region 2 >> condition >> plsql expression >> :P2_FILTER = 'B'
Hope this helps,
Sam
Edited by: Sam_06 on Aug 17, 2010 12:20 PM -
Using CASE WHEN for Essbase column in OBIEE 11g
Hi all,
I have a business model in OBIEE 11g, taking the source from Essbase 11. The measures of the Essbase cube in the physical layer is flattened, and the aggregations for the measures are set to SUM.
The Product dimension has 5 generations. In Product logical table, I created a logical column called "Product Grouping" using a simple CASE WHEN formula:
CASE
WHEN "TEST"."Product"."Gen5,Product" IN ('100-10', '100-20', '200-10', '300-10') THEN 'Group 1'
WHEN "TEST"."Product"."Gen5,Product" IN ('100-30', '200-20') THEN 'Group 2'
ELSE 'Group 3'
END
Problems:
1. If I don't place this "Product Grouping" in the logical level/hierarchy, I got error in the report when I simply show Product Grouping and a measure.
2. If I place this "Product Grouping" in the logical level/hierarchy (on the 5th level), no more error in the report when I simply show "Product Grouping" and a measure. The measure value also shows the correct SUM (group by). However, when I add "Gen1,Product" the "Product Grouping" and the measure value suddenly becomes not grouped by.
Has anyone ever tried and encountered something like this? Any thoughts?
Thank you very much!Hi Deepak, thansk for the suggestion.
However, I can't use calculated item for this report because:
1. incorrect result will be shown when my measures involve a formula to derive a percentage value.
2. calculated item is not available if we do "combine requests" (or union) in 11g.
Any thoughts anyone on how to solve this? Is this just me, or it's a bug?
Thank you very much. -
Using facelets and javascript in dynamic regions
Hello
I'm using JDeveloper 11g 11.1.1.4.0.
In the JDeveloper's documentation I found that there is the best parctice to use facelets.
Now, I have next problem.
I use dynamic region iside xhtml (facelets) page. Inside that dynamic region there is a view (jsff).
The problem is that I can't use any custom JavaScript in that jsff.
I tried next thing:
<trh:script id="trhs1">
<af:resource type="javascript">
testm = function (event) {
alert('qqq');
</af:resource>
</trh:script>
<af:clientListener method="testm" type="dblClick"/>If that task-flow is placed inside jspx (not facelets) page, then all works.
If that task-flow is placed inside xhtm (facelets) page, I have an error from browser that javascript's 'testm' method is not defined.
I checked source code of the result html-page, and my javascript code really doesn't exists there.
I can fix it by moving javascript code from the taskflow's jsff to surrounding xhtml page or using jspx page, but, maybe, there is another solution?
Anatolii
Edited by: Anatolii. on 11/4/2011 0:32Thank for replay, Shay
I found that in Web User Interface Developer's Guide for Oracle ADF, 2 Getting Started with ADF Faces, Section 2.4, "Creating a View Page":
Best Practice: Use Facelets to take advantage of the following:
The Facelets layer was created specifically for JSF, which results in reduced overhead and improved performance during tag compilation and execution.
Facelets is considered the primary view definition technology in JSF 2.0.
Some future performance enhancements will only be available with Facelets
Now I have facelets page with dynamic region, it works.
I've decided to use facelets because of the forthcoming JDeveloper with JSF 2.0 and for performance improvements described above.
Do you think it's better to use jspx?
I have not found any limitations for facelets in Web User Interface Developer's Guide for Oracle ADF and Fusion Developer's Guide for Oracle ADF
Anatolii
Maybe you are looking for
-
FCP 6 no longer 'sees' my Sony HDR-HC7. Works perfectly with iMovie HD
I used to be able to capture from and print to my HC7. Setup was saved. Now, FCP doesn't 'see' the camera with the saved settings, or when I try setting it up again from scratch. Camera connection, driver, etc. are good in that the camera works perfe
-
I cannot install Adobe Air into my Samsung Tab3. I get error code "-24"
I need Adobe Air on my Samsung Tab3 tablet to run vital programs. I cannot install the app -- I get error code "-24". Many others are reporting the same issue. Is there a fix for this, or is one coming? I will have to change devices if not
-
How to create table with dynamic amount of columns which are nested columns
M trying to fetch data and show in a javaFX table. My table displays the details of different items from ItemVO , where : public class ItemVO() String itemName; List<ItemTypeVO> type; and My ItemTypeVO has the following attributes : public class Item
-
Why do the pictures I take no longer go to the photo stream album and only go to camera roll? They always did before and now don't.
-
4.0 EA1 - Query Builder
If you type a select statement: select * from all_objects; Then hover over the * to expand to the full column list, if you then move to the query builder to alter the columns chosen you get a error "text is not a valid, single select statement". If h