Can I use my Korg D3200 as input mixer?

Can I use my Korg D3200 as input mixer for recording into Garageband?

Actually, there is a way to limit the amount of space Time Machine uses for backup so that it won't eat up all your disk space...for example, I have mine set to only use 65GB, and then it starts to overwrite older backups...Google it for more info. To begin with, I deleted my Sparse Disk Image Bundle from Time Capsule, and used Disk Utility to create a Sparse Disk Image Bundle (turn off backups first!!!) with a capacity of 65GB in HFS Journaled, Case Sensitive...The Image must be named as follows "Full Computer Name_Ethernet MAC Address" (The ethernet MAC address is used even if you plan to solely use wifi for backups). for example, my Sparse Disk Image Bundle name is "Ahmad Atiya's MacBook Pro_00254b9d8f72.sparsebundle" Move this image to your time capsule's main directory (if you didn't create it there to begin with). Go to your Time Machine preferences, turn it on, and set it to use your Time Capsule. It should start using the image you created. If you click "get info" on the disk image, it'll show a capacity of whatever you created.

Similar Messages

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

Can I use Bulk Collect results as input parameter for another cursor

MUSIC            ==> remote MUSIC_DB database, MUSIC table has 60 million rows
PRICE_DATA ==> remote PRICING_DB database, PRICE_DATE table has 1 billion rows
These two table once existed in same database, but size of database exceeded available hardware size and hardware budget, so the PRICE_DATA table was moved to another Oracle database. I need to create a single report that combines data from both of these tables, and a distributed join with DRIVING_SITE hint will not work because the size of both table is too large to push to one DRIVING_SITE location, so I wrote this PLSQL block to process in small blocks.
QUESTION: how can use bulk collect from one cursor and pass that bulk collected information as input to second cursor without specifically listing each cell of the PLSQL bulk collection? See sample pseudo-code below, I am trying to determine more efficient way to code than hard-coding 100 parameter names into 2nd cursor.
NOTE: below is truly pseudo-code, I had to change the names of everything to adhere to NDA, but below works and is fast enough for my purposes, but if I want to change from 100 input parameters to 200, I have to add more hard-coded values. There has got to be a better way.
DECLARE
     -- define cursor that retrieves distinct SONG_IDs from MUSIC table in remote music database
     CURSOR C_CURRENT_MUSIC
     IS
    select distinct SONG_ID
    from MUSIC@MUSIC_DB
    where PRODUCTION_RELEASE=1
     /* define a parameterized cursor that accepts 100 SONG_IDs and retrieves
          required pricing information
     CURSOR C_get_music_price_data
               P_SONG_ID_001 NUMBER, P_SONG_ID_002 NUMBER, P_SONG_ID_003 NUMBER, P_SONG_ID_004 NUMBER, P_SONG_ID_005 NUMBER, P_SONG_ID_006 NUMBER, P_SONG_ID_007 NUMBER, P_SONG_ID_008 NUMBER, P_SONG_ID_009 NUMBER, P_SONG_ID_010 NUMBER,
               P_SONG_ID_011 NUMBER, P_SONG_ID_012 NUMBER, P_SONG_ID_013 NUMBER, P_SONG_ID_014 NUMBER, P_SONG_ID_015 NUMBER, P_SONG_ID_016 NUMBER, P_SONG_ID_017 NUMBER, P_SONG_ID_018 NUMBER, P_SONG_ID_019 NUMBER, P_SONG_ID_020 NUMBER,
               P_SONG_ID_021 NUMBER, P_SONG_ID_022 NUMBER, P_SONG_ID_023 NUMBER, P_SONG_ID_024 NUMBER, P_SONG_ID_025 NUMBER, P_SONG_ID_026 NUMBER, P_SONG_ID_027 NUMBER, P_SONG_ID_028 NUMBER, P_SONG_ID_029 NUMBER, P_SONG_ID_030 NUMBER,
               P_SONG_ID_031 NUMBER, P_SONG_ID_032 NUMBER, P_SONG_ID_033 NUMBER, P_SONG_ID_034 NUMBER, P_SONG_ID_035 NUMBER, P_SONG_ID_036 NUMBER, P_SONG_ID_037 NUMBER, P_SONG_ID_038 NUMBER, P_SONG_ID_039 NUMBER, P_SONG_ID_040 NUMBER,
               P_SONG_ID_041 NUMBER, P_SONG_ID_042 NUMBER, P_SONG_ID_043 NUMBER, P_SONG_ID_044 NUMBER, P_SONG_ID_045 NUMBER, P_SONG_ID_046 NUMBER, P_SONG_ID_047 NUMBER, P_SONG_ID_048 NUMBER, P_SONG_ID_049 NUMBER, P_SONG_ID_050 NUMBER,
               P_SONG_ID_051 NUMBER, P_SONG_ID_052 NUMBER, P_SONG_ID_053 NUMBER, P_SONG_ID_054 NUMBER, P_SONG_ID_055 NUMBER, P_SONG_ID_056 NUMBER, P_SONG_ID_057 NUMBER, P_SONG_ID_058 NUMBER, P_SONG_ID_059 NUMBER, P_SONG_ID_060 NUMBER,
               P_SONG_ID_061 NUMBER, P_SONG_ID_062 NUMBER, P_SONG_ID_063 NUMBER, P_SONG_ID_064 NUMBER, P_SONG_ID_065 NUMBER, P_SONG_ID_066 NUMBER, P_SONG_ID_067 NUMBER, P_SONG_ID_068 NUMBER, P_SONG_ID_069 NUMBER, P_SONG_ID_070 NUMBER,
               P_SONG_ID_071 NUMBER, P_SONG_ID_072 NUMBER, P_SONG_ID_073 NUMBER, P_SONG_ID_074 NUMBER, P_SONG_ID_075 NUMBER, P_SONG_ID_076 NUMBER, P_SONG_ID_077 NUMBER, P_SONG_ID_078 NUMBER, P_SONG_ID_079 NUMBER, P_SONG_ID_080 NUMBER,
               P_SONG_ID_081 NUMBER, P_SONG_ID_082 NUMBER, P_SONG_ID_083 NUMBER, P_SONG_ID_084 NUMBER, P_SONG_ID_085 NUMBER, P_SONG_ID_086 NUMBER, P_SONG_ID_087 NUMBER, P_SONG_ID_088 NUMBER, P_SONG_ID_089 NUMBER, P_SONG_ID_090 NUMBER,
               P_SONG_ID_091 NUMBER, P_SONG_ID_092 NUMBER, P_SONG_ID_093 NUMBER, P_SONG_ID_094 NUMBER, P_SONG_ID_095 NUMBER, P_SONG_ID_096 NUMBER, P_SONG_ID_097 NUMBER, P_SONG_ID_098 NUMBER, P_SONG_ID_099 NUMBER, P_SONG_ID_100 NUMBER
     IS
     select
     from PRICE_DATA@PRICING_DB
     where COUNTRY = 'USA'
     and START_DATE <= sysdate
     and END_DATE > sysdate
     and vpc.SONG_ID IN
               P_SONG_ID_001 ,P_SONG_ID_002 ,P_SONG_ID_003 ,P_SONG_ID_004 ,P_SONG_ID_005 ,P_SONG_ID_006 ,P_SONG_ID_007 ,P_SONG_ID_008 ,P_SONG_ID_009 ,P_SONG_ID_010,
               P_SONG_ID_011 ,P_SONG_ID_012 ,P_SONG_ID_013 ,P_SONG_ID_014 ,P_SONG_ID_015 ,P_SONG_ID_016 ,P_SONG_ID_017 ,P_SONG_ID_018 ,P_SONG_ID_019 ,P_SONG_ID_020,
               P_SONG_ID_021 ,P_SONG_ID_022 ,P_SONG_ID_023 ,P_SONG_ID_024 ,P_SONG_ID_025 ,P_SONG_ID_026 ,P_SONG_ID_027 ,P_SONG_ID_028 ,P_SONG_ID_029 ,P_SONG_ID_030,
               P_SONG_ID_031 ,P_SONG_ID_032 ,P_SONG_ID_033 ,P_SONG_ID_034 ,P_SONG_ID_035 ,P_SONG_ID_036 ,P_SONG_ID_037 ,P_SONG_ID_038 ,P_SONG_ID_039 ,P_SONG_ID_040,
               P_SONG_ID_041 ,P_SONG_ID_042 ,P_SONG_ID_043 ,P_SONG_ID_044 ,P_SONG_ID_045 ,P_SONG_ID_046 ,P_SONG_ID_047 ,P_SONG_ID_048 ,P_SONG_ID_049 ,P_SONG_ID_050,
               P_SONG_ID_051 ,P_SONG_ID_052 ,P_SONG_ID_053 ,P_SONG_ID_054 ,P_SONG_ID_055 ,P_SONG_ID_056 ,P_SONG_ID_057 ,P_SONG_ID_058 ,P_SONG_ID_059 ,P_SONG_ID_060,
               P_SONG_ID_061 ,P_SONG_ID_062 ,P_SONG_ID_063 ,P_SONG_ID_064 ,P_SONG_ID_065 ,P_SONG_ID_066 ,P_SONG_ID_067 ,P_SONG_ID_068 ,P_SONG_ID_069 ,P_SONG_ID_070,
               P_SONG_ID_071 ,P_SONG_ID_072 ,P_SONG_ID_073 ,P_SONG_ID_074 ,P_SONG_ID_075 ,P_SONG_ID_076 ,P_SONG_ID_077 ,P_SONG_ID_078 ,P_SONG_ID_079 ,P_SONG_ID_080,
               P_SONG_ID_081 ,P_SONG_ID_082 ,P_SONG_ID_083 ,P_SONG_ID_084 ,P_SONG_ID_085 ,P_SONG_ID_086 ,P_SONG_ID_087 ,P_SONG_ID_088 ,P_SONG_ID_089 ,P_SONG_ID_090,
               P_SONG_ID_091 ,P_SONG_ID_092 ,P_SONG_ID_093 ,P_SONG_ID_094 ,P_SONG_ID_095 ,P_SONG_ID_096 ,P_SONG_ID_097 ,P_SONG_ID_098 ,P_SONG_ID_099 ,P_SONG_ID_100
     group by
           vpc.SONG_ID
          ,vpc.STOREFRONT_ID
     TYPE SONG_ID_TYPE IS TABLE OF MUSIC@MUSIC_DB%TYPE INDEX BY BINARY_INTEGER;
     V_SONG_ID_ARRAY                         SONG_ID_TYPE                     ;
     v_commit_counter           NUMBER := 0;
BEGIN
     /* open cursor you intent to bulk collect from */
     OPEN C_CURRENT_MUSIC;
     LOOP
          /* in batches of 100, bulk collect ADAM_ID mapped TMS_IDENTIFIER into PLSQL table or records */
          FETCH C_CURRENT_MUSIC BULK COLLECT INTO V_SONG_ID_ARRAY LIMIT 100;
               EXIT WHEN V_SONG_ID_ARRAY.COUNT = 0;
               /* to avoid NO DATA FOUND error when pass 100 parameters to OPEN cursor, if the arrary
                  is not fully populated to 100, pad the array with nulls to fill up to 100 cells. */
               IF (V_SONG_ID_ARRAY.COUNT >=1 and V_SONG_ID_ARRAY.COUNT <> 100) THEN
                    FOR j IN V_SONG_ID_ARRAY.COUNT+1..100 LOOP
                         V_SONG_ID_ARRAY(j) := null;
                    END LOOP;
               END IF;
          /* pass a batch of 100 to cursor that get price information per SONG_ID and STOREFRONT_ID */
          FOR j IN C_get_music_price_data
                    V_SONG_ID_ARRAY(1) ,V_SONG_ID_ARRAY(2) ,V_SONG_ID_ARRAY(3) ,V_SONG_ID_ARRAY(4) ,V_SONG_ID_ARRAY(5) ,V_SONG_ID_ARRAY(6) ,V_SONG_ID_ARRAY(7) ,V_SONG_ID_ARRAY(8) ,V_SONG_ID_ARRAY(9) ,V_SONG_ID_ARRAY(10) ,
                    V_SONG_ID_ARRAY(11) ,V_SONG_ID_ARRAY(12) ,V_SONG_ID_ARRAY(13) ,V_SONG_ID_ARRAY(14) ,V_SONG_ID_ARRAY(15) ,V_SONG_ID_ARRAY(16) ,V_SONG_ID_ARRAY(17) ,V_SONG_ID_ARRAY(18) ,V_SONG_ID_ARRAY(19) ,V_SONG_ID_ARRAY(20) ,
                    V_SONG_ID_ARRAY(21) ,V_SONG_ID_ARRAY(22) ,V_SONG_ID_ARRAY(23) ,V_SONG_ID_ARRAY(24) ,V_SONG_ID_ARRAY(25) ,V_SONG_ID_ARRAY(26) ,V_SONG_ID_ARRAY(27) ,V_SONG_ID_ARRAY(28) ,V_SONG_ID_ARRAY(29) ,V_SONG_ID_ARRAY(30) ,
                    V_SONG_ID_ARRAY(31) ,V_SONG_ID_ARRAY(32) ,V_SONG_ID_ARRAY(33) ,V_SONG_ID_ARRAY(34) ,V_SONG_ID_ARRAY(35) ,V_SONG_ID_ARRAY(36) ,V_SONG_ID_ARRAY(37) ,V_SONG_ID_ARRAY(38) ,V_SONG_ID_ARRAY(39) ,V_SONG_ID_ARRAY(40) ,
                    V_SONG_ID_ARRAY(41) ,V_SONG_ID_ARRAY(42) ,V_SONG_ID_ARRAY(43) ,V_SONG_ID_ARRAY(44) ,V_SONG_ID_ARRAY(45) ,V_SONG_ID_ARRAY(46) ,V_SONG_ID_ARRAY(47) ,V_SONG_ID_ARRAY(48) ,V_SONG_ID_ARRAY(49) ,V_SONG_ID_ARRAY(50) ,
                    V_SONG_ID_ARRAY(51) ,V_SONG_ID_ARRAY(52) ,V_SONG_ID_ARRAY(53) ,V_SONG_ID_ARRAY(54) ,V_SONG_ID_ARRAY(55) ,V_SONG_ID_ARRAY(56) ,V_SONG_ID_ARRAY(57) ,V_SONG_ID_ARRAY(58) ,V_SONG_ID_ARRAY(59) ,V_SONG_ID_ARRAY(60) ,
                    V_SONG_ID_ARRAY(61) ,V_SONG_ID_ARRAY(62) ,V_SONG_ID_ARRAY(63) ,V_SONG_ID_ARRAY(64) ,V_SONG_ID_ARRAY(65) ,V_SONG_ID_ARRAY(66) ,V_SONG_ID_ARRAY(67) ,V_SONG_ID_ARRAY(68) ,V_SONG_ID_ARRAY(69) ,V_SONG_ID_ARRAY(70) ,
                    V_SONG_ID_ARRAY(71) ,V_SONG_ID_ARRAY(72) ,V_SONG_ID_ARRAY(73) ,V_SONG_ID_ARRAY(74) ,V_SONG_ID_ARRAY(75) ,V_SONG_ID_ARRAY(76) ,V_SONG_ID_ARRAY(77) ,V_SONG_ID_ARRAY(78) ,V_SONG_ID_ARRAY(79) ,V_SONG_ID_ARRAY(80) ,
                    V_SONG_ID_ARRAY(81) ,V_SONG_ID_ARRAY(82) ,V_SONG_ID_ARRAY(83) ,V_SONG_ID_ARRAY(84) ,V_SONG_ID_ARRAY(85) ,V_SONG_ID_ARRAY(86) ,V_SONG_ID_ARRAY(87) ,V_SONG_ID_ARRAY(88) ,V_SONG_ID_ARRAY(89) ,V_SONG_ID_ARRAY(90) ,
                    V_SONG_ID_ARRAY(91) ,V_SONG_ID_ARRAY(92) ,V_SONG_ID_ARRAY(93) ,V_SONG_ID_ARRAY(94) ,V_SONG_ID_ARRAY(95) ,V_SONG_ID_ARRAY(96) ,V_SONG_ID_ARRAY(97) ,V_SONG_ID_ARRAY(98) ,V_SONG_ID_ARRAY(99) ,V_SONG_ID_ARRAY(100)
          LOOP
               /* do stuff with data from Song and Pricing Database coming from the two
                    separate cursors, then continue processing more rows...
          END LOOP;
          /* commit after each batch of 100 SONG_IDs is processed */
          COMMIT;
          EXIT WHEN C_CURRENT_MUSIC%NOTFOUND; -- exit when there are no more rows to fetch from cursor
     END LOOP; -- bulk fetching loop
     CLOSE C_CURRENT_MUSIC; -- close cursor that was used in bulk collection
     /* commit rows */
     COMMIT; -- commit any remaining uncommitted data.
END;

I've got a problem when using passing VARRAY of numbers as parameter to remote cursor: it takes a super long time to run, sometimes doesn't finish even after an hour as passed.
Continuing with my example in original entry, I replaced the bulk collect into PLSQL table collection with a VARRAY and i bulk collect into the VARRAY, this is fast and I know it works because I can DBMS_OUTPUT.PUT_LINE cells of VARRAY so I know it is getting populated correctly. However, when I pass the VARRAY containing 100 cells populated with SONG_IDs as parameter to cursor, execution time is over an hour and when I am expecting a few seconds.
Below code example strips the problem down to it's raw details, I skip the bulk collect and just manually populate a VARRAY with 100 SONG_ID values, then try to pass to as parameter to a cursor, but the execution time of cursor is unexpectedly long, over 30 minutes, sometime longer, when I am expecting seconds.
IMPORTANT: If I take the same 100 SONG_IDs and place them directly in the cursor query's where IN clause, the SQL runs in under 5 seconds and returns result. Also, if I pass the 100 SONG_IDs as individual cells of a PLSQL table collection, then it also runs fast.
I thought that since the VARRAY is used via select subquery that is it queried locally, but the cursor is remote, and that I had a distribute problem on my hands, so I put in the DRIVING_SITE hint to attempt to force the result of query against VARRAY to go to remote server and rest of query will run there before returning result, but that didn't work either, still got slow response.
Is something wrong with my code, or I am running into a Oracle problem that may require support to resolve?
DECLARE
     /* define a parameterized cursor that accepts XXX number of in SONG_IDs and
      retrieves required pricing information
     CURSOR C_get_music_price_data
p_array_song_ids SYS.ODCInumberList
     IS
     select /*+DRIVING_SITE(pd) */
count(distinct s.EVE_ID)
     from PRICE_DATA@PRICING_DB pd
     where pd.COUNTRY = 'USA'
     and pd.START_DATE <= sysdate
     and pd.END_DATE > sysdate
     and pd.SONG_ID IN
          select column_value from table(p_array_song_ids)
     group by
           pd.SONG_ID
          ,pd.STOREFRONT_ID
V_ARRAY_SONG_IDS SYS.ODCInumberList := SYS.ODCInumberList();
BEGIN
V_ARRAY_SONG_IDS.EXTEND(100);
V_ARRAY_SONG_IDS( 1 ) := 31135 ;
V_ARRAY_SONG_IDS( 2 ) := 31140   ;
V_ARRAY_SONG_IDS( 3 ) := 31142   ;
V_ARRAY_SONG_IDS( 4 ) := 31144   ;
V_ARRAY_SONG_IDS( 5 ) := 31146   ;
V_ARRAY_SONG_IDS( 6 ) := 31148   ;
V_ARRAY_SONG_IDS( 7 ) := 31150   ;
V_ARRAY_SONG_IDS( 8 ) := 31152   ;
V_ARRAY_SONG_IDS( 9 ) := 31154   ;
V_ARRAY_SONG_IDS( 10 ) := 31156   ;
V_ARRAY_SONG_IDS( 11 ) := 31158   ;
V_ARRAY_SONG_IDS( 12 ) := 31160   ;
V_ARRAY_SONG_IDS( 13 ) := 33598   ;
V_ARRAY_SONG_IDS( 14 ) := 33603   ;
V_ARRAY_SONG_IDS( 15 ) := 33605   ;
V_ARRAY_SONG_IDS( 16 ) := 33607   ;
V_ARRAY_SONG_IDS( 17 ) := 33609   ;
V_ARRAY_SONG_IDS( 18 ) := 33611   ;
V_ARRAY_SONG_IDS( 19 ) := 33613   ;
V_ARRAY_SONG_IDS( 20 ) := 33615   ;
V_ARRAY_SONG_IDS( 21 ) := 33617   ;
V_ARRAY_SONG_IDS( 22 ) := 33630   ;
V_ARRAY_SONG_IDS( 23 ) := 33632   ;
V_ARRAY_SONG_IDS( 24 ) := 33636   ;
V_ARRAY_SONG_IDS( 25 ) := 33638   ;
V_ARRAY_SONG_IDS( 26 ) := 33640   ;
V_ARRAY_SONG_IDS( 27 ) := 33642   ;
V_ARRAY_SONG_IDS( 28 ) := 33644   ;
V_ARRAY_SONG_IDS( 29 ) := 33646   ;
V_ARRAY_SONG_IDS( 30 ) := 33648   ;
V_ARRAY_SONG_IDS( 31 ) := 33662   ;
V_ARRAY_SONG_IDS( 32 ) := 33667   ;
V_ARRAY_SONG_IDS( 33 ) := 33669   ;
V_ARRAY_SONG_IDS( 34 ) := 33671   ;
V_ARRAY_SONG_IDS( 35 ) := 33673   ;
V_ARRAY_SONG_IDS( 36 ) := 33675   ;
V_ARRAY_SONG_IDS( 37 ) := 33677   ;
V_ARRAY_SONG_IDS( 38 ) := 33679   ;
V_ARRAY_SONG_IDS( 39 ) := 33681   ;
V_ARRAY_SONG_IDS( 40 ) := 33683   ;
V_ARRAY_SONG_IDS( 41 ) := 33685   ;
V_ARRAY_SONG_IDS( 42 ) := 33700   ;
V_ARRAY_SONG_IDS( 43 ) := 33702   ;
V_ARRAY_SONG_IDS( 44 ) := 33704   ;
V_ARRAY_SONG_IDS( 45 ) := 33706   ;
V_ARRAY_SONG_IDS( 46 ) := 33708   ;
V_ARRAY_SONG_IDS( 47 ) := 33710   ;
V_ARRAY_SONG_IDS( 48 ) := 33712   ;
V_ARRAY_SONG_IDS( 49 ) := 33723   ;
V_ARRAY_SONG_IDS( 50 ) := 33725   ;
V_ARRAY_SONG_IDS( 51 ) := 33727   ;
V_ARRAY_SONG_IDS( 52 ) := 33729   ;
V_ARRAY_SONG_IDS( 53 ) := 33731   ;
V_ARRAY_SONG_IDS( 54 ) := 33733   ;
V_ARRAY_SONG_IDS( 55 ) := 33735   ;
V_ARRAY_SONG_IDS( 56 ) := 33737   ;
V_ARRAY_SONG_IDS( 57 ) := 33749   ;
V_ARRAY_SONG_IDS( 58 ) := 33751   ;
V_ARRAY_SONG_IDS( 59 ) := 33753   ;
V_ARRAY_SONG_IDS( 60 ) := 33755   ;
V_ARRAY_SONG_IDS( 61 ) := 33757   ;
V_ARRAY_SONG_IDS( 62 ) := 33759   ;
V_ARRAY_SONG_IDS( 63 ) := 33761   ;
V_ARRAY_SONG_IDS( 64 ) := 33763   ;
V_ARRAY_SONG_IDS( 65 ) := 33775   ;
V_ARRAY_SONG_IDS( 66 ) := 33777   ;
V_ARRAY_SONG_IDS( 67 ) := 33779   ;
V_ARRAY_SONG_IDS( 68 ) := 33781   ;
V_ARRAY_SONG_IDS( 69 ) := 33783   ;
V_ARRAY_SONG_IDS( 70 ) := 33785   ;
V_ARRAY_SONG_IDS( 71 ) := 33787   ;
V_ARRAY_SONG_IDS( 72 ) := 33789   ;
V_ARRAY_SONG_IDS( 73 ) := 33791   ;
V_ARRAY_SONG_IDS( 74 ) := 33793   ;
V_ARRAY_SONG_IDS( 75 ) := 33807   ;
V_ARRAY_SONG_IDS( 76 ) := 33809   ;
V_ARRAY_SONG_IDS( 77 ) := 33811   ;
V_ARRAY_SONG_IDS( 78 ) := 33813   ;
V_ARRAY_SONG_IDS( 79 ) := 33815   ;
V_ARRAY_SONG_IDS( 80 ) := 33817   ;
V_ARRAY_SONG_IDS( 81 ) := 33819   ;
V_ARRAY_SONG_IDS( 82 ) := 33821   ;
V_ARRAY_SONG_IDS( 83 ) := 33823   ;
V_ARRAY_SONG_IDS( 84 ) := 33825   ;
V_ARRAY_SONG_IDS( 85 ) := 33839   ;
V_ARRAY_SONG_IDS( 86 ) := 33844   ;
V_ARRAY_SONG_IDS( 87 ) := 33846   ;
V_ARRAY_SONG_IDS( 88 ) := 33848   ;
V_ARRAY_SONG_IDS( 89 ) := 33850   ;
V_ARRAY_SONG_IDS( 90 ) := 33852   ;
V_ARRAY_SONG_IDS( 91 ) := 33854   ;
V_ARRAY_SONG_IDS( 92 ) := 33856   ;
V_ARRAY_SONG_IDS( 93 ) := 33858   ;
V_ARRAY_SONG_IDS( 94 ) := 33860   ;
V_ARRAY_SONG_IDS( 95 ) := 33874   ;
V_ARRAY_SONG_IDS( 96 ) := 33879   ;
V_ARRAY_SONG_IDS( 97 ) := 33881   ;
V_ARRAY_SONG_IDS( 98 ) := 33883   ;
V_ARRAY_SONG_IDS( 99 ) := 33885   ;
V_ARRAY_SONG_IDS(100 ) := 33889 ;
    /* do stuff with data from Song and Pricing Database coming from the two
separate cursors, then continue processing more rows...
FOR i IN C_get_music_price_data( v_array_song_ids ) LOOP
. (this is the loop where I pass in v_array_song_ids
. populated with only 100 cells and it runs forever)
END LOOP;
END;

Can FMLE use Firewire as a source input?

This is a follow up of my last thread. I am needing to take a composite a/v source and input it into a laptop to bring into FMLE and then stream that out. Can the current version of FMLE take firewire video and audio as a source input?
If so, can anyone recommend a converter? I'm looking at one by Grass Valley (the company that makes EDIUS) that seems like it might work. Here's the link to it.
http://www.grassvalley.com/products/advc55
http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Analog_to_Dig ital.html
Thanks!

Sorry I posted this and then started reading some of the replies. I did see them as I am newbie here.
Looks like the only solution at this time is to export the data to a csv file, open it in numbers and use the numbers file as the source for the mail merge.
Would it be possible to have FileMaker then run an applescript ? or automator script to automatically convert the CSV file to numbers and then rename that Numbers file so that it is consistent and can be reused by the Pages "template" for subsequent documents to be used based on this template?

Can I use "apple script" to auto input xml file to final cut pro and auto export mp4 file?

Now, I'v a lot of final cut pro x 's xml, I want to use ""apple script" or other method to auto input xml and output mp4 in final cut pro x . How can I finish it?

Where did the XML come from? What did it consist of?

I have on;y one audio port can i use it for input and output at the same time?

i have the new macbook pro 13 in and i want to connect aguitar as input and output on an amp but i have only one audio port

You can't use the jack as an input and output simultaneously. The solution is to look for a USB or Firewire interface to get your guitar sound into the computer.

Can I use HDMI port on my Macbook Pro for digital audio INPUT?

Trying to find a way to get digital audio input to my new MBP with retina. HDMI supports audio and video, so can I use that port as an input?

It is not recommenced to use TimeMachine in a partition, either on the boot drive or externals because of problems in the past with that arrangement.
You also need hardware protection in addition to software protection.
If you want to do what I do, which is have a second 50% partition bootable clone of the first.
1: Use BootCamp software to create yourself a 50% sized partition, then exit the program. (you also can do it in Disk Utility, but it's tricky)
2: Head to Disk Utility and select the BOOTCAMP partition and change it's name and format to OS X Extended Journaled.
(To map off bad sectors in advance, use Disk Utility Erase with the next to last on the right selection, improves reliability and makes for faster reads)
3: Download Carbon Copy Cloner, now select your Macintosh HD partition and clone it to the second partition.
4: Whenever you want to boot from the second partition, just hold the option key down on the keyboard to select it to boot from.
You can access the folders on the second boot partition as well, to grab deleted files you accidentally erased (which is a rare thing for most to occur) however you should leave it alone and as a clone.
You can update the clone when you need to, or schedule it to run automatically.
You should also do this occasionally with a external drive, as the internal drive can die and take both partitions with it.
I currently do this with my laptop, that way if I'm mobile and have a serious issue, I can boot from the cloned partition in seconds without carrying a drive around. If I need large space for something I wasn't aware of, I can erase the clone partition and later clone it again.
Software does all the work, just pick a time your not using the machine and let it work. Painless really.
Most commonly used backup methods

Can I use the value range as F4 ValueHelp in WebUI?

Hi,
I have a Z-field in CustomerH. Its datatype has a domain with a fixed value range attached.
I show this field in the header of a sales order but the value help does not show up automatically.
My question is: Can I use this value range as input for the value help or do I have to code a "real" value help and attach it via the V-Getter?
Thanks.

Hi,
/people/tim.back/blog/2009/02/09/learn-how-to-create-drop-down-listboxes-in-crm-70s-web-client-ui
to fetch data, you can use table mentioned above. Pass domain name and language to get all values maintained in domain.
Regards,
BJ

Can we use Boolean or Validations in HFM Rules

Hi Gurus
Can we use Boolean or Validations for input cells in HFM?
Example:
1. I want to restrict the user to enter only single digit (0 or 1 are valid) in to a cell for a special purpose. (in smartview or webform)
2. I want to restrict the user to enter only single Character (Y or N are valid) in to a cell for a special purpose.(in smartview or webform)
After submitting the data, If the data does not matches to the given condition it has to through an Error message or validation message to the end user.
Can we write these kind of rules in HFM?
Regards
Smilee

Hi Smilee,
HFM's model of validation and error checking is not as you describe. Data cannot be validated at the form/data-entry level. Instead, HFM's validation model goes like this:
1. You must provide with a validation account for each validation you need, with a common parent usually declared in the validation accounts in the ApplicationSettings. A zero (or within tolerance limits) in the validation account means correct, any other value means error.
2. You must write a normal calculation rule, which checks the user's input for valid data entry and place a zero or other value to the validation account.
3. The user inputs her values (via form, or data load, FDM, SmartView etc.), saves her data and calculates.
4. As soon as all the validation calculations write zeros to the to validation account during calculations, the user can submit successfully (submission is part of process management). However, if any of the validations fail (meaning non zero value to the top validation account) the user cannot submit until she corrects the error value. Errors can be traced easily, judging by the exact validation account which fails.
Another observation regarding your point 2 is that only numeric values can be written in HFM cells, no alphabetic characters are allowed. You should replace Y/N logic to 0/1.
Regards,
Kostas

Can I use a DAQ with my CCD?

I have a multifunction DAQ card and LabView 6.1. I would like to capture images using a CCD camera and am hoping that all I need is software, is this available? Do I need a new card and if so which one?

If your camera is analog, you can use you multifunction DAQ card to read in the analog signal. You will have to monitor the signal for the H-Sync and the V-Sync pulses and then convert the meaningful analog picture signal into digital values. For more information on the analog video signal please reference the following document:
Anatomy of a Video Signal
If the camera is digital, you will not be able to read in the signal with the multifunction DAQ board. The multifunction DAQ boards can perform static digital input and output (software timed). For reading in a digital signal you will need a hardware timed digital acquistion. Our
DAQ boards in the 653x family can be used for hardware timed digital input and output. In this situation, you would use the pixel clock of the camera to time the acqusition of the 653x device.
If the camera is analog you should consider purchasing one of National Instruments framegrabber boards for you acquistion. These boards are designed specifically for this purpose. (NI 1409 or NI 1411)
If the camera is digital, I would suggest visiting our online camera advisor to see if your camera is compatible with our digital framegrabbers (NI 1422, NI 1424, NI 1428)
Industrial Camera Advisor
Will Denman
Application Engineering
National Instruments

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

Can I use a MIDI keyboard as an input device for a software instrument?

I have a Casio CTK-2100 that I am currently playing around with in Logic Pro 9. It can record and playback the different instruments fine using MIDI tracks. But I was wondering if it is possible to use the keyboard as an input device for a software instrument instead of the "Step Input Keyboard".
Is it? If so, how do I set it up?

Yes, the terminology can be a bear, many, many years ago when I started using Logic the manuals were written completely by the programmers, while they were quite humorous in places the were also really hard to understand so I learned/realized.. you can't really do anything so wrong it's going to destroy your computer so why not go ahead and experiment. I learned the basics of Logic without a manual, months later when I went back to find some some details I could figure out the manual made a lot more sense.
Logic has been somewhat Appleized but it's not really an Apple program, it was purchased almost as developed as it is now... a lot of the additions a fluff to make it easier to understand for new users while at the same time there are some real improvements.
This is personal opinion: With all of the forums/online tutorials...etc...etc. It seems users are learning (but not understanding) the same things, plus everyone wants to use it right away so nobody takes a deep breath and investigates on their own. Logic is a deep, deep program, while learning don't be afraid to go off on a tangent and explore the program without any other input, it can actually be inspirational. One other thing good about the manual or "Online Help", in looking up a function you will invariably come across a related concept that will provide further insight.
And..... have fun.

I bought my macbook pro in the US. can i use it in china? (P.S the power in the US is 110v, in China is 220v, however, the mac power supply has said: "Input: 100~240v")

i bought my macbook pro in the US. can i use it in china? (P.S the power in the US is 110v, in China is 220v, however, the mac power supply has said: "Input: 100~240v")

The Magsafe autoswitches based on detected power. You will likely need a wall adapter to alter ther US-based 3-prong to whatever is used in China.

Can we use cl_gui_alv_grid to give input on the screen?

Hi experts ,
Can we use <b>cl_gui_alv_grid</b> to give input on the screen and save the input in some internal table which is passed as a parameter with the calling method of
cl_gui_alv_grid??
Thanks in advance
regards,
Ashwin

OR you want to can set any particular field by
ls_fcat-edit = 'X'.
in the field catalog for that field .
Assign the points if it helps you ...
Gaurang

How can I use 4 DIO lines as digital input in a E series-SC 2050-ER8 set up ?

I have a DAQ system with an E series DAQ card that is connected to SC-2050 and ER8. I want to use 4 DIO lines (out of 8) for digital input. How can I do this?

Hello Suresh,
There are a variety of ways to accomplish this. If you are using LabVIEW, you will use the DIO Port Config VI and the DIO Port Read VI. You will use the line direction map input of the DIO Port Config VI to setup which 4 lines you want to be the input lines. The LabVIEW shipping example entitled 'Dig Multi-line Direction (E) VI' shows how to use the lines of the digital port on an E-Series device for input and output.
If you are using NI-DAQ function calls, you can use the Dig_Line_Config and Dig_In_Line calls to configure a digital line for input and then read from that line.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Can I use my Korg D3200 as input mixer?

Similar Messages

Maybe you are looking for