Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router.
Neighbour's wireless Router = Time Capsule = My Macbook
If I can please tell me how to set this up in details please. thanks for your time.
Message was edited by: Thomas Pink

You are trying to set up the Time Capsule as a Wireless Router
and Repeater? - To share an existing wireless network, wireless?
The AirPort Extreme was capable of repeating (like a transceiver)
to and from an existing wireless network, to expand upon it; but
only did this with another AirPort product, such as an Express.
The Time Capsule and many of its features are outlined here, with more
information: AirPort + Time Capsule: http://www.apple.com/support/airport/
You may have to direct your question regarding expanding an existing
wireless network, to the Discussions section for the specific products.
Usually, the "extend a network" wireless feature in the software setup
only applies to the use of a second Apple AirPort-type base station;
such as the Extreme, Express, etc. The compatibility is between the
AirPort-like Apple products; but a bridge could be made if an Express
were attached to the other wireless network via Ethernet cable, then
the Time Capsule may be able to see it. This would require testing.
Apple - Support - Discussions - AirPort (+ Time Capsule)
http://discussions.apple.com/category.jspa?categoryID=140
Good luck & happy computing!

Similar Messages

Can I use a Time Capsule to extend my wireless network.

Hi, I have just bought a 3TB time capsule as my old (flat style) 500GB TC is reaching full capacity. The old style TC will then be surplus to requirements as a data storage unit, at least for myself, though it might be useful for my son to use as his Time Capsule.
Ideally, as we have a wireless 'blind spot' out in the rear extension of the house, it would be useful to use the unit to extend my wireless network (and also use it as a separate TC if possible). Is this possible? If it is how would I go about it?
Hope someone can help . . . .
Cheers
John

Is it possible for you to consider connecting the Time Capsules together using a wired Ethernet connection?
Here is what Apple has to say in their support document about extending:
Adding Wi-Fi base stations when it is unnecessary can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead. The network configuration also becomes more complex. In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device. The general rule is to keep the Wi-Fi network as simple as possible. You can accomplish this by using the minimum number of Wi-Fi base stations required to service the physical network area and by using Ethernet wherever possible.
Extending the range of your Wi-Fi network by connecting Wi-Fi base stations together using Ethernet is always the best option, and will provide the best throughput.
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

Setting Up Time Capsule as a Second Wireless Router

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it using my macbook (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router to expand my neighbor's network. Like repeating (like a transceiver) to and from neighbor's wireless network, to expand upon it.
Internet = Neighbor's Modem = Neighbor's wireless Router = Time Capsule = My Macbook
If you can please tell me how to set this up in details on my TC please. thanks for your time.

802.11g AirPort Extreme Base Station -> 802.11n Time Capsule
With "mixed" AirPorts, you will need to configure both routers into a Wireless Distribution System (WDS). Your neighbor's AirPort Extreme Base Station (AEBS) will be the main and your Time Capsule (TC) will be the remote base station in this WDS.
To simplify setup, you should connect your TC directly to the AirPort's LAN port by Ethernet. Once the WDS is configured, you can disconnect the TC and place it at the desired location.
The following are the basic configuration steps to create a WDS:
(Note: To facilitate the WDS set up, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - AEBS
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
o Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)
802.11n AirPort Extreme Base Station -> 802.11n Time Capsule
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.

How can I use my time capsule with windows7

How can I use my time capsule with windows7?

This is asked regularly.
https://discussions.apple.com/message/10978060#10978060
Look at the more like this. On the right column next to the post.
Load airport utility for windows.. which will also load bonjour for windows.
In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

HT201250 Can I use one Time Capsule to back up two iMacs?

Can I use one Time Capsule to back up two iMacs using Time Machine? Both are running Mountain Lion.
Fouind the answer in other questions. Don't know how to remove this message. Sorry, Des

Yes, if you use an application like Genie Timeline Pro, which was designed for this type of purpose. Genie Timeline will make a complete copy of your Dell on the first backup. After that, it will only backup the changes that have occurred since the last backup.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...

Can I use 2 Time Capsules on the same network

Can I use 2 Time Capsules on the same network
Posted: Jul 23, 2009 1:49 PM Reply Email
Here is what I want to do. I currently have a time capsule used for one end of the house. Currently my 2 kids rooms are in an addition that I have run a cable from the time capsule to each of their rooms. If I want to give them wireless for that part of the house could I add another TC, for wireless and they can both backup their macbooks to that time capsule.
So Can I add a 2nd time capsule to extend by "N" network, or should I just go with an AP express or extreme and let them each have their own HD backup for each macbook?
Brett

Have bought many reconditioned (Refurb) product from Apple site and have always been happy with them. To date none have failed me and we have been Apple customers since 2006. With that said when you buy Refurbs make sure you know what model you are getting. The current TCs on the Apple site are last generation. The way to tell is to check the model number against the current one. Easy way to do this is to put both in the shopping cart and compare the model numbers. The Refurb model number is FB277LL/A and the new TC model is MB765LL/A. The first digits identify whether a Refurb or new, the rest should be the same if they are the same model number.
Before you buy, now which model number you want and then check other sites to compare prices. I recently purchased a new TC on Amazon for a better price then the Apple Store Site. For larger Refurb purchases like MBPs, we choose to buy directly from Apple; but for peripherals we often buy from OWC, Amazon, and other sites. Hope this helps.

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

Can I use my Time Capsule to set up multiple networks, or just one?

Can I use my Time Capsule to set up multiple networks, or just one? We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

Two big IFs here.
Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule. it's on the bottom of the device.....starts with an "A" followed by four numbers.
Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature.
Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers. If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

Can i use my time capsule as back up without hooking it to internet

Can I use my Time Capsule as a back up without hooking it up to the modem?
Can I use the Time Capsule as back up without hookig it up to internet?

Yes, but it is extremely poor setup.
The TC does not have to be the main router.. normally you can plug it into the main router and simply bridge it and leave the wireless off even.. it then sits there as a dumb network drive.
If you setup the TC with no internet connection then the computer that backs up to it, must lose internet connection while doing backups.. In stand alone simple setup the TC as router. and ignore all the issues with disconnected WAN. When you want to backup change over the computer wireless or ethernet to the TC.
It is clunky and you will lose the whole advantage of time machine.. automated backups.
I recommend you simply buy a USB drive. it is faster, more reliable and less costly.

Can I use my Time Capsule to extend a current network? If so, How?

Can I use my Time Capsule to extend a current network? If so, How?

I want to use it wirelessly to extend the range of the network. I currently have an xfinity router as the main.
You may not have understood what I was trying to say above.
If you want the Time Capsule to extend wirelessly, then you must have an Apple router as your "main" router.
You have an xfinity router. You cannot use the Time Capsule to extend the range of an xfinity router wirelessly.

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

Ow can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

How can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

bzb888 wrote:
I have a wireless transmitter already, would like to use the capsule just as a back up drive, I tried hooking up from the ethernet port on the imac to the one of the ports on the capsule but then my Wifi would not work. do I hook the cable to the port with the circle or the arrows?
It is better to have the TC as part of the main network in bridge. You do not need to run wireless.
If you want to use the TC plugged in by ethernet and still use wireless for internet, that is possible but the setup is rather more complicated.. the computer must not get confused about which device to use as a gateway or dns server.
See info in this thread on setting this up.
https://discussions.apple.com/thread/4817218?tstart=30
I need to add.. a USB drive would be cheaper, faster and more reliable. It is really poor use of a TC.

Can I use my Time Capsule as a backup disk and storage?

Can I use my Time Capsule as a backup disk and put files from my other USB external hard drive on it, using the TC as an external as well?

Actually, there is a way to limit the amount of space Time Machine uses for backup so that it won't eat up all your disk space...for example, I have mine set to only use 65GB, and then it starts to overwrite older backups...Google it for more info. To begin with, I deleted my Sparse Disk Image Bundle from Time Capsule, and used Disk Utility to create a Sparse Disk Image Bundle (turn off backups first!!!) with a capacity of 65GB in HFS Journaled, Case Sensitive...The Image must be named as follows "Full Computer Name_Ethernet MAC Address" (The ethernet MAC address is used even if you plan to solely use wifi for backups). for example, my Sparse Disk Image Bundle name is "Ahmad Atiya's MacBook Pro_00254b9d8f72.sparsebundle" Move this image to your time capsule's main directory (if you didn't create it there to begin with). Go to your Time Machine preferences, turn it on, and set it to use your Time Capsule. It should start using the image you created. If you click "get info" on the disk image, it'll show a capacity of whatever you created.

Can I use my Time Capsule for wifi parental control?

Can I use my Time Capsule for WiFi parental control. The objective first is to use a time clock to control internet access (completely on or off). Second objective is to use the Time Capsule which is also the WiFi router for more selective internet control? Anyone out there have any tips on making this work? We have Time Warner cable feeding the house internet, which is then corrected to the 2Tb Time Capsule which also provides our WiFi. Any information including other alternatives would be most appreciated. Surely we are not the only parents on the planet with this issue. Thanks very much!

how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
What wireless devices are we looking at here?
Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
Look for Wireless Clients and click on the numerical IP address that is displayed
Another box will open
Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
Write that down and note that it is your Mac.
Now, connect another wireless device and repeat the sequence. Click on the "other" listing that you see to find out more info about that device. Write down the ID or Address and note what device it is. Then power it off.
Do the same for each wireless device that you want to have limited access.
Post back when you have all the info.

Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

Similar Messages

Maybe you are looking for