Can I use Office 2007 csv file for data load?

Hi all,
I see some special characters while looking at data after load.
I am using the latest version of microsoft office.
Does SAP BW support the csv files saved in 2007 version?
Thanks and Regards,
Ravi.

Hi Ravi,
This is another error.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error Message:
Error 1 when loading external data
Error when opening the data file
Errors in source system.
Step By step analysis:
Data Request sent off?
Data Selection sucessfully started?
Data se;ection sucessfully finished?
Processing error in source system reported?
Processing error in warehouse reported?
Could you please guide me houw to overcome these. Thanks.

Similar Messages

How to search a .csv file for data using its timestamp, then import to labview

Hi, I'm currently obtaining density, viscosity and temperature data from an instrument, adding a timestamp and writing it to a .csv file which I can view in Excel. This works fine (see attached code) but what I need to do now is to search that csv file for data which was obtained at a certain time, import the temperature, density & viscosity values at this time back into Labview to do some calculations with them, while the data acquisition process is still ongoing.
I've found various examples on how to import an entire csv file into labview, but none on how to extract data at a specific time. Also, whenever I try to do anything with the .csv file while my data acquistion VI is running, I receive error messages (presumably because I'm trying to write to and import data from the .csv file simultaneously). Is there some way around this, maybe using case structures?
If you need to know my skill level, I've been using Labview for a few weeks and prior to that have basically no experience of writing code, so any help would be great. Thanks!
Solved!
Go to Solution.
Attachments:
Lemis VDC-30 read registers MODBUS v5.vi ‏56 KB

It sounds as if you are going about this a little backwards writing to a data file and then extracting from the file but its the weekend so I can't think of an improved way to do it at the moment.
Searching for a specific time with those specific values is quite easy, or if you wanted to select any time then you could interpolate the values to find any value that you want (This is where the contiguous measurement comes in, as you have readings at discrete times you will have to interpolate the values if you want to get the 'measured value' at a time point that is not exactly one of your measured points).
If you can extract the TDMS time column and the T, D & V then simply thresholding and interpolating each of your array/data sets should allow readings at your desired times.
Attachments:
Interpolate.png ‏301 KB

Create csv file for data in tables

Hi All,
I need to "export" data for about 60 tables in one of my databases to a csv file format using a "|" as a separator.
I know I can do this using a query like:
select col1 || '|' || col2 || '|' || col3 from table;
Some of my tables have more than 50 columns so I'm guessing there is an easier way to do this than to construct select SQL statements for each table?
Thanks in advance.

I would point out that the OP did not identify the target for the files so it could be an non-Oracle database or Excel in which case external tables would not work since Oracle only writes to external tables in datapump format. If the target is another Oracle database then external tables would be an option. If external tables are an option then insert/select over a database link would be a potential alternate approach to using csv files.
I use a SQL script to generate the Select statement to create my csv files.
set echo off
rem
rem SQL*Plus script to create comma delimited output file from table
rem
rem 20000614 Mark D Powell   Automate commonly done task
rem
set pagesize 0
set verify    off
set feedback off
set linesize 999
set trimspool on
accept owner    prompt 'Enter table owner => '
accept tblname prompt 'Enter table name => '
spool csv2.sql
select 'select ' from sys.dual;
select decode(column_id,1,column_name,
             '||''|''||'||column_name)
from   sys.dba_tab_columns
where table_name = upper('&&tblname')
and    owner      = upper('&&owner')
order by column_id;
select 'from &&owner..&&tblname;'
from   sys.dual;
spool off
undefine owner
undefine tblname
HTH -- Mark D Powell --

Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! Thanks

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Negative Numbers considered as VARCHAR while uploading CSV file under Data Load in APEX

I am trying to upload a CSV file which contains negative numbers. These negative numbers are being considered as VARCHAR2 while uploading. And if I change the Column Type to Numbers the upload fails.
Any solutions the problem will highly be appreciated.

select * from nls_database_parameters
where parameter = 'NLS_NUMERIC_CHARACTERS'
shows you which characters your database believes represent the decimal place and the thousands separator. So, if your database expects 1,234.123 and you present a 'number' as 1 234,123 it will complain.
Also, in your case... your comma-separated-values contain commas? Or are the individual fields enclosed with quotes?

Can I use the same music file for two accounts to be able to set up two different iTunes accounts?

I would like to set up two different Itunes accounts on my mac. I would like to have different accounts for my wife and I so that our devices have different accounts/contacts/email and stuff but we would like to use the same music library. Can I set the different itunes to go to the same file to see music? Or could I copy the music file and give the copy to the second itunes account? I could set it up and authorize the music like for another user? Is any of this possible?

Hello 19firedude
Try moving the entire iTunes Media folder to the Shared folder on your Mac and then in iTunes preferences, change the location of that folder to line it up. Then all you have to do in another user is follow the second set of steps to get that shared properly. Check out the article below for more detailed instructions.
iTunes: How to share music between different user accounts on a single computer
http://support.apple.com/kb/HT1203
Regards,
-Norm G.

Add the ability to use .xls and .xlsx files for Data Merge

Who wouldn't like that?!

Me! Me!
Or rather: I think the big empty part of Data Merge right now is its inability to handle XML input. Much as I detest XML, it seems like a lot of people would really like that to happen, it does appear to be a Web 2.0 -type technology that it's easy to get the InDesign Marketing team excited about.
It's easy enough to convert XLS/XLSX into CSV (or XML), so I think improving XML would be a better use of scarce resources...
(I can't believe I'm tossing out a vote in favor of XML. Kill me now!)

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

You can either use Office for Mac 2011 or use Boot Camp to run Windows or use a VM, such as Parallels Desktop to run Windows. Running Windows, you'd be able to use MS Office for Windows.
Clinton

HT2486 how can I export the contact book data to a csv file for editing?

how can I export the contact book data to a csv file for editing?

You can edit a card right in Contacts. No need to export and re-import.
Select a name and on the right side, click the Edit button:

I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external?

I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?

Good luck and you are welcome.
Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/

How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.

How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.

Please see:
http://www.bidn.com/blogs/DevinKnight/ssis/76/does-file-exist-check-in-ssis
http://social.msdn.microsoft.com/Forums/en-US/01ce7e4b-5a33-454b-8056-d48341da5eb2/vb-script-to-write-variables-to-text-file

How can i get sample CSV files for Demo BI Content

Hello Experts. Documentation say that there is sample CSV files for modules that come with delivered BI content. I am planning to work with the demo content which i have already installed. I then need to populate the objects with the relevant demo data that is said to be in the CSV files that come with the demo content. Please let me know from where i can get these CSV files. Good day.

Hi Huggins,
There are sample csv data in AL11 in the work directory. You may want to look through here to see if the csv files you require are there.
Thanks,
Nick.

Do you know if it's possible to generate Word 2003 files from RoboHelp if we're using Office 2007 and RoboHelp 2007?

Do you know if it's possible to generate Word 2003 files from
RoboHelp if we're using Office 2007 and RoboHelp 2007? We are
thinking of upgrading, but have customers that would still require
Word 2003 formats because they won't have 2007 installed.
Thanks!

Hi NewtoRobohelp
Unfortunately I don't have Office 2007 in front of me to test
with. But I'm thinking that as long as Office 2007 still produces
the same formats as 2003, you could do it this way.
From RoboHelp 7 and using Office 2007, generate Printed
ouptut. Open said printed output in Office 2007 and perform a Save
As. Save the document as a RTF (Rich Text Format) document.
RTF is more universal. So I'm thinking this may be a possible
way around it. There is also the possibility that Word 2007 offers
up an ability when saving a file to save in an older format.
Cheers... Rick

Can anyone help me find Office 2007 product key for preinstalled trial?

Hello - can someone advise, please? My laptop came with a preinstalled trial of Office 2007, which needs to be activated with a 25-digit code. The onscreen message says to follow the hotlnk to a Microsoft site, where advice on obtaining the code can be found. However, when I reach the Microsoft site a message tells me that the page does not exist. I've also tried using a code on a sticker on the base of the laptop but that doesn't seem to be the right one.
I've run out of ideas and the number of times I can use Office 2007 is running down - any help would be much appreciated!
Thanks.

I think the simple answer is that MS no longer offer 2007 trials and instead offer 2010 trials at [http://office.microsoft.com/en-us/try/try-office-2010-FX101868838.aspx?WT.mc_id=MiG_Products]

Can you use airport extreme 802.11n for files backup

Can you use airport extreme 802.11 for files back up and sharing

You can if you connect a hard drive that has been formatted correctly to the USB port on the AirPort Extreme.
Apple does not officially support Time Machine backups for this type of setup, but you could store regular files this way.

Can I use Office 2007 csv file for data load?

Similar Messages

Maybe you are looking for