Can I use parallel and multiplexed mode?

Hi,
I have
a NI USB-6259 DAQ Module (Two Connectors with to Cables to two SCXI-1349, which connects the DAQ to the Chassis)
a SCXI-1001 Chassis
3 SCXI-1143 8 Channel Low Pass Filter Modules
and
a SCXI-1180 Front End Plate
As the DAQ has 16 diff. AI Channels, I would like to drive two SCXI 1143 in multiplexed mode(connected to Connector 0 at USB-DAQ via SCXI 1349) and one in parallel mode assigned to AI 8-15 (Connected to Connector 1 at USB-DAQ via SCXI 1349) .
The configuration is approved by MAX
But when I run it with the software I get an error saying that a simultaneous scan is possible Error -223835. And that the selected channel is not in the task Error: -200486.
Can one DAQ device(like NI USB-6259) be assigned with Channels 0-7 in multiplexed mode (multiplexing two SCXI 1143 8 Channel) and the rest of the channels in parallel mode for on SCXI card? NI-USB 6259 has to separate connectors but is it still seen as one DAQ card?
What does the error say? I thought I configured for a simultaneous scan.
Attached to this post is a picture:
Top Left: Back view of my NI USB-6259
Top Right: Front view of my chassis with three SCXI 1143
Bottom: Back view of my chassis. Two SCXI 1249 are connected to two Cards. One card should be run in parallel mode, two in multiplexed mode.
Cheers,
Alex
Solved!
Go to Solution.

@ Lorenz-Mie
you are right that I need a new DAQ device, but as stated in the M-Series manual on page A-108:
"Use Connector 0 of your M Series device to control SCXI. NI-DAQ 7.4
and later supports SCXI in parallel mode on Connector 1."
Thats what I've done. I'll keep on trying.
Alex

Similar Messages

Parallel and multiplexed modes for SCXI...

I am having difficulty understanding how the Parallel and Multiplexed modes for SCXI modules work. I've been trying to find one comprehensive document but have been unsuccessful. Can you please help considering the following configurations:
Single chassis, single module
Single chassis, multiple modules
Multi-chassis, single module on each (I don't know when that would ever be used, but nevertheless...)
Multi-chassis, multiple modules
Also I would appreciate it if you could mention when the DAQ device's onboard multiplexer is used, when the SCXI chassis/module/bus' multiplexer (I don't know where exactly the SCXI-based multiplexing occurs) is used, and when both are used.
Thank you.

These links should help you
http://digital.ni.com/public.nsf/websearch/cc4aa48bbff92ba586256522004eb7e3?OpenDocument
http://digital.ni.com/public.nsf/allkb/E3D3723E9D05AB4986256AA9005B5572
http://digital.ni.com/public.nsf/allkb/86C493E0768EBCFE86256FD4006BCD52
http://digital.ni.com/manuals.nsf/websearch/c195895e8c9cae3d8625691f004db285
Regards,
Dev

Can i use parallels and windows 7 on my iMac

What is the best version of Windows to use with Parallels 7 on my iMac? I am looking into 64-bit Windows 7 or XP. But I don't know which is best suited.....

Doesn't matter, Win 7 is the newer, more secure and better one, XP is 10 years old and being discontinued.
https://discussions.apple.com/docs/DOC-3282
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Get GPS info using Autonomous and CellSite Mode parallelly using MultiThreading

I tried to get the GPS latitude and longitude values using Autonomous and CellSite Mode parallelly using two threads, but while execution only one thread is being active and I get values from only that, the other thread doesn't return any values at all.
Is it possible to retrieve the GPS information using multiple threads running parallelly and also can I display the latitude and longitude values from the threads on the screen with less accuracy rate among the values.
Thanks in advance...

Your thread may not get noticed as it is in General Support threads. You may post your thread in Java Development to get faster response.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

HT1455 can i use safari in safe mode to reinstall mountain lion

Can i use Safari in safe mode to reinstall mountain lion os?

Why not do it from the Recovery partition?
And, why are you posting this in the Snow Leopard forum?

How can I use OmniPortlet and Web Clipping Portlet?

How can I use OmniPortlet and Web Clipping Portlet?

You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter

How can I use excel and word on the IPAD2

How can I use excel and word documents on my Ipad 2

There are apps such as Documents To Go which support reading/editting/creating those sorts of documents :
standard version - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version - http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8

How can I use undo and redo with run time menu?

Hi..I try to built my own menu for graphic programming. How can I use undo and redo in labview with run time menu?

filozof-
During runtime, by default, LabVIEW has undo/redo data changes under the edit menu. This will undo/redo changes made to controls during runtime. If you want a more extensive undo/redo (custom for your application), you are going to have to do quite a few things
1) Create a custom runtime menu (Edit>>RunTime Menu) and place your own undo/redo controls on it
2) Keep an action history in your program
3) Catch the Shortcut menu event for your custom undo/redo controls
4) Reverse the last action in your histroy when you catch the event
This method would allow you undo entire operations (like resize, move, or whatever kind of functionality you are building into your application) unstead of just undoing data changes.
Xaq

Hi, I have already bought Adobe Photoshop and Lightroom for 1 year. Now I will change my PC to Mac. Can I use Photoshop and Lightroom in my new Mac?

Hi, I have already bought Adobe Photoshop and Lightroom for 1 year. Now I will change my PC to Mac. Can I use Photoshop and Lightroom in my new Mac?

Yes.
Mylenium

I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?

I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?

No. Return it and get your money back if still within the 30 day return window. All US iPhones are carrier locked and cannot be officially unlocked.

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the my new iPhone number is OS. Any ideas?

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>

Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

Can we use overload and overwrite concept in OO-abap

hi
can we use overload and overwrite concept in OO-abap

Hi
CLASS zl_lcl_vehicle DEFINITION.
PUBLIC SECTION.
Signature of method
METHODS: set_make
IMPORTING value(im_make) TYPE string " Pass by value
im_model TYPE string," Pass by reference
ENDCLASS. "zl_lcl_vehicle DEFINITION
CLASS zl_lcl_vehicle IMPLEMENTATION.
Implementation of method.
METHOD set_make.
IF im_make IS NOT INITIAL
AND im_model IS NOT INITIAL.
gv_make = im_make.
gv_model = im_model.
ENDIF.
ENDMETHOD. "set_make
ENDCLASS. "zl_lcl_vehicle
Overloading means changing signature as well as implementation of a method.
Overriding is changing only implementation of method with signature unchanged.
From ABAP perspective, only the CONSTRUCTOR method can be overloaded in a subclass i.e both the signature and implementation can be adapted in subclass.
Any other method can't be overloaded. It can only be redefined/overridden i.e implementation changed with signature unchanged.
In ABAP there is something called a redefinition.
When you inherit a class from a super class, you can redifne a method. You cannot chnage the signature( Interface) of the method. It will remain the same as that of the super class.You must redefine a method in the same visibility section in which it appears in the superclass.
Eg.
CLASS C_SUPER_CLASS DEFINITION .
PUBLIC SECTION.
METHODS: DRIVE ,
STOP.
PROTECTED SECTION.
DATA SPEED TYPE I.
ENDCLASS.
CLASS C_SUPER_CLASS IMPLEMENTATION.
METHOD DRIVE.
SPEED = 0.
WRITE: / 'Bike speed =', SPEED.
ENDMETHOD.
ENDCLASS.
CLASS C_SUB_CLASS DEFINITION INHERITING FROM C_SUPER_CLASS.
PUBLIC SECTION.
METHODS DRIVE REDEFINITION.
ENDCLASS
CLASS C_SUB_CLASS IMPLEMENTATION.
METHOD DRIVE.
SPEED = SPEED + 10.
WRITE: / 'Bicycle speed =', SPEED.
ENDMETHOD.
ENDCLASS.
Regards
Vasu

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Can i use safary and watch on the tv

I bought the apple tv device
from my ipad can i use safary and watch on the tv

If you want to mirror you need iPad 2 (or later)
http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

Can I use parallel and multiplexed mode?

Similar Messages

Maybe you are looking for