Can I use the lightning to USB cord with any USB/AC adapter?

Just got a new IPhone 5.  Can I use the lightning to USB cord with the AC adapter I had for my IPhone 4 (or any other USB to AC adapter)?

Yes I just check and the one for my MacBook fits my 12 Watt iPad charger.

Similar Messages

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

  • Can I use  the Lightning Digital AV Adaptor via my ipad mini to show Netflix on my TV?

    Can I use  the Lightning Digital AV Adaptor via my ipad mini to show Netflix on my TV?
    Thanks

    Hello brianrice,
    From the product page at the Apple store for the Lightning Digital AV Adaptor:
    Use the Lightning Digital AV Adapter with your iPad with Retina display, iPad mini, iPhone 5, and iPod touch (5th generation) with Lightning connector. The Lightning Digital AV Adapter supports mirroring of what is displayed on your device screen — including apps, presentations, websites, slideshows, and more — to your HDMI-equipped TV, display, projector, or other compatible display in up to 1080p HD.
    It also outputs video content — movies, TV shows, captured video — to your big screen in up to 1080p HD. Simply attach the Lightning Digital AV Adapter to the Lightning connector on your device and then to your TV or projector via an HDMI cable (sold separately).
    Source: http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    Regards,
    Sterling

  • I have purchased apple phone 4s for india (non-carrier). Can i use the same phone in USA with usa based sim

    I have purchased iphone 4s for India from India. Can I use the same phone in usa with usa based sim

    An unlocked phone is an unlocked phone, which is the same for the iPhone.

  • Can I use the iPone 3gs SIM Card with the iPad 2?

    Can I use the iPone 3gs SIM Card with the iPad 2

    The iPhone 3GS uses a full size SIM card.
    The iPad uses a micro-SIM card.

  • Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it first?

    Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it up fully before you can use it. I do not want to damage the laptop by misusing the battery.

    Attach the charger and start charging the battery to 100%.  The good news is that after you have connected the charger, you may start using the MBP as well.
    Ciao.

  • Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?

    Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?

    No. You need to convert to another format first or use a third party plug-in.

  • I can not use the adobe reader version 10 with mozilla 4.01 - what to do

    i can not use the adobe reader version 10 with mozilla 4.01 - what to do

    Here, I finally have a solution.
    Gotta love Google.
    More helpful than Adobe so far.
    Note: Clicking on the link below will immediately open the download dialogue box.
    ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.1/en_US/AdbeRdr1011_en_US.exe
    I used this download to install, and the Installer was flawless.
    Thanks everyone who contributed ideas and potential solutions.

  • Can I use the backups that I made with Leopard ?

    Hi,
    Can I use the backups that I made with Leopard or do I have to re-configure Time Machine again, like it never happened when SL is installed ?
    Sincerely.

    You should only have to worry about doing this, if you choose to erase and install Snow Leopard.
    Snow Leopard by default upgrades your system, and thus a restore would only be necessary in an emergency.

  • How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

    How can I use the built-in Isight camera and an external video camera at the same time?
    I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
    Thanks

    Simple question with a not so simple answer.
    (a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations.  Digital video is processor intensive.  The only way to know if your Mac can do this it to try it.  If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus.  You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
    (b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
    How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
    This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
    Other iMovie versions work slightly differently.
    iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    iMovie 8 (from iLife '09) is slightly different as explained in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
    Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
    (If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
    (4) For FaceTime, launch the app and click the Video menu item.
    If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    (5) I do not use Skype oir Oovoo.  For those or other apps, see Help for each app for info on how to select your desired camera.
    Message was edited by: EZ Jim

  • Can i use the S4 4GLTE in india with local sim card

    Hi,
    Your advise would be highly appreciated , i have samsung s4 4G LTE . I am on contract and will be suspending my US service for 6 months
    Can i use the Phone with indian Local sim?  will it work ?
    Verizon customer support told me 4G LTE phones are unlocked by nature , so i dont need to do anything , just insert any other SIM card and it will work fine
    I am not sure on it , can some one clarify ?
    Also , I see indian SIM card are big in size and Current SIM card is smaller
    -GJ

    Hi ,
    Lets forget the size issue , i can trim the SIM and manage .
    My main question was Customer support told 4GLTE phones are unlocked by nature , and can be used with other local SIM Cards , is it true ?

  • Can I use the iPod touch 3rd generation with these speakers?

    I wanna buy some speakers. But now I feel a bit uneasy. My question:
    Can I use the iPos touch 3rd generation ( http://store.apple.com/ch-de/browse/home/shopipod/family/ipodtouch 32 GB ) with these speakers ( http://store.apple.com/ch-de/product/TR142ZM/A?fnode=MTY1NDA1NA&mco=MTE0MDM5Mzg ) ?
    I know that only first & 2 Generation is. But if I want to buy cool speakers, which should I buy then?
    Thanks for help
    (and sorry for my english, I'm swiss xD)

    You cannot.
    You would have to buy a new one.
    Apple will gie you a 10% discount on a new ipod if you bring in an old one for recycling.

  • Can I use the Speakers AirPlay Philips DS3880W with the new iPod and the new iPad?

    First, I´m Spanish so I can be bad writing in English!!
    I want to buy the Speaker AirPlay Philips DS3880W and I have got the new iPad and the new iPod, in the compatibility, in the information of the speaker, I can´t see them. Why? Althrought the software is the same, Can I use the speaker with them?
    Here is the link: http://store.apple.com/es/product/H6906ZM/A/philips-ds3880w-airplay-speaker?fnod e=77&fs=s%3DpriceLH&p=1

    I say yes. this page says:
    See all FAQs
    Does the product support iPad2 and the New iPad?
    Yes. The product supports iPad2 and the New iPad.
    http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=DS3880W%2F10&dct=FAQ&faqview=1 &new_tmpl=1&refdisplay=C36_IPAD2_NEWIPAD_FULLSUPPORT&refnr=0085930&scy=HU&slg=AE N

  • Can i use the laser jet printer P1102w with the i pad2?

    Can i use the P1102w printer with my i pad or i phone?
    This question was solved.
    View Solution.

    Hi,
    Your printer is Airprint Compatible with the latest firmware.
    Make sure your iPhone / iPad have iOS version 4.2 and above to support Airprint.
    Upgrade the printer firmware from your PC by using the tool below, by using the tool for your OS:
    Windows / Mac OS
    Then you will be able to print from the iOS built in Print function as long they are connected to the same network as your printer,
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • [EWS][Java] How can I use the Search Filter only mails with attachments?

    Hey,
    I'm trying to search a folder ( doesn't matter  which ) for ONLY mails with attachments.
    How can I use the search filter for that purpose? 
    Thanks!

    You can drag the attachment collumn from settings and sort on that collumn
    In the main Outlook window, on the View menu, point to
    Current View, and then click Customize Current View.
    Click Fields. In the Available fields list, click the field that you want to add, and then click
    Add.
    Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

Maybe you are looking for

  • Unable to retrieve parameters from RFC Function Module

    Hi All, I have created a model for the RFC Enabled function module BAPI_BUPA_CENTRAL_GETDETAIL within my webdynpro program. I am passing parameters to the function module BAPI_BUPA_CENTRAL_GETDETAIL and I have validated that this is being passed corr

  • How to handle czech special character

    Hi, I have a table where i save description for a status code in different languages. I need to save for Czech language. I have changed the language in toolbar in windows. However the sap system is not accepting few characters(although it is acceptin

  • Each clip is precomposed when dynamic linking a timeline from Premier

    When I'm sending a timeline from Premier Pro CC to After Effects CC all of my video clips are being pre composed individually in the after effects composition. The last project I worked on had the same workflow except when they came into after effect

  • Db_checkpoint: Unable to allocate thread control block

    Hello, Every second day BDB 4.8 runs out of cache memory (size = 512MB). We have 10 static worker processes (no segfaults) and one db_checkpoint-process (checkpoints once a minute and exists). We use only DB_WRITE_NOSYNC After two days the db_checkpo

  • Hide Master Pages dynamically / programmatically

    Hi there, does anybody know if there is a way to hide master pages programmatically? Situation: I've built a PDF that contains two master pages. First page contains common master data. The second page contains confidential information which must only