Can I use the Podcast logo/logomark in my publication?

I want to know if it is legal for me to use the Podcast logo/logomark in my print publication to advertise our Podcast? The logo I'm referring to is the purple/black image with black person/microphone icon with the purple, concentric broadcast rings. I've seached for any usage rights, guideline, permission information, but haven't found anything. I've not seen any trademark, copyright or registered marks, so I'm curious to know if it is usable.
Anyone know?
Thanks,
Mat

From their website:
Got a Mac? Get an iRig!
Now for the hidden features… if you have a newer Mac computer, you can use the iRig as an audio interface for it. The newer Mac models feature a headphone jack that act as a headphone/microphone input for headsets. This means that you can also use your iRig with your Mac laptop or desktop machine to take advantage of the higher processing power of your machine and you don't need an additional audio interface to use it. Simply plug the iRig into your headphone jack, plug your headphones/line out into your iRig and you've got a fully functioning audio interface for guitar/bass/keyboards, or any other instrument with a ¼" out. Pretty cool.

Similar Messages

Can I use the Podcast app like the older iOS 6 Music Player?

I've updated to iOS 7 and iTunes 11.1 and found that things seem drastically different.
How i used to do podcasts:
Subscribe to a podcast in iTunes on my Mac
Sync to iPhone using a cable
What used to happen:
Podcasts that were selected to sync did if there were unplayed episodes
The Music player would list only those podcasts where there were unplayed episodes
Now things have changed. I immediately was told that none of my podcasts were playable without the Podcast app. I downloaded it and installed it.
What is happening now:
Still subscribing to a podcast in iTunes on my Mac
Sync to iPhone using a cable
Podcasts showing unplayed in iTunes on my Mac = 46
Podcasts showing unplayed in the Podcast app = 57 - the difference appears to be that the podcast app is showing non-downloaded podcasts
Podcast app showing all podcasts whether or not there are any to play. The list includes podcasts that are not supposed to sync to my phone.
The Podcast listing appears to be in a random order (actual list shown)-
Apple Keynotes (no episodes)
This week in Photo (8 episodes)
Jake and Amir (no episodes)
Podcast Beyond (no episodes)
Accidental Tech Podcast (no episodes)
Vector (1 episode)
Podcasts with no new episodes now show a new episode though it looks like the episode is not downloaded
I'm not sure why what is being shown in iTunes is not being shown in the Podcast app.
Is there anyway to get the old behavior using the Podcast app?

Additional information. Can this be right?
I spoke to Apple support who said that the settings for podcast syncing in iTunes are no longer being used since Apple moved to their Podcast app.
This may explain why I see all 45 podcasts on my iphone when I only have 15 of them set to sync.
She also said that I would need to manually sync listened/unlistened podcasts between my Mac and my mobile devices since podcasts were no longer being synced from iTunes.
Can anyone verify?

Can Sky use the Freeview logo like that?

Surprised this hasn't come up already. Now that we have Sky Sports the first thing I noticed was that Sky have added an extra logo next to the Sky Sports 1/2 logo in the top right on the digital terrestrial transmission. The logo is the same shape as the Freeview logo which suggests this is being done to ensure no pubs, etc are using the BT/TopUp version of Sky Sports as I believe BT/TopUp aren't allowed to sell to commercial premises. Now, I thought Sky had already taken care of this with the 'pint glass' logo on the Pub versions of Sky Sports on digital satellite which means there shouldn't be any need for this extra logo which is permanently on, even during the commercials which of course could result in screen burn, etc.
So, a few questions really:
As the 'shape' is that of the Freeview logo, are they actually allowed to use it?
Who asked for it to be there, BT or Sky?
Can it be changed / removed / moved?
Why does it need to be there at all?
---Remember to mark as 'solved' and give stars when you like a post---

Additional information. Can this be right?
I spoke to Apple support who said that the settings for podcast syncing in iTunes are no longer being used since Apple moved to their Podcast app.
This may explain why I see all 45 podcasts on my iphone when I only have 15 of them set to sync.
She also said that I would need to manually sync listened/unlistened podcasts between my Mac and my mobile devices since podcasts were no longer being synced from iTunes.
Can anyone verify?

Hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen

hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharan

Welcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html

While listening to a podcast on my iPhone I can e-mail the podcast ID. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer.

While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?

Same here. I just posted a question too.

Can Apple not force people to use the podcast app if they dont want to?!

Can Apple please NOT force people to use the podcast app if they dont want to?
It is a horrific app.
It uses data to play the podcasts which, once downloaded should not reqiure wifi to play!
Fix it, otherwise stop forcing us to use it and allow us a choice!

They do. There's lots of podcasting apps in the store, and you can erase the podcasts app and go back to the old way of playing them with the music app. Biggest downside is that you can't download podcasts on the phone without the podcasts app, so either do it on your computer or download the app, get the podcasts and erase the app. There's a few topics on here on how to do this. Search is your friend.

Why can't I use the Podcast app with the new update?

Why can't I use the Podcast app with the new update? There needs to be an update for ios7 but it freezes and goes back to the home screen, can anyone help, thanks!

See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

Wifi problems. I am using my ipad connected to a secure server. I keep having connection problems. My ipad shows I am connected, but I can't use the internet at all. I keep getting a not connected message. Help

I am using my ipad on a secure network. I have problems staying connected. It shows I'm connected with full bars but I can't use the internet. I turn the wireless off, reset the network and turned off the ipad, but this problem keeps happening. (Its been going on about 2 weeks) Any ideas?

Sayingyou went through all the steps of fixing provides us with little information see we do not know what step you tried.
- Have you reset your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powered off and then back on your router?
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections-
- Configuring your router to use no encryption as a test. If OK, the try a simple password.

My iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah- Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

my iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah… Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

I can't get the podcast app because I don't have ios7 is there anything I can do?

I can't get the podcast app because I don't have ios7 is there anything I can do?

There are several very good third-party podcast apps you can download from the app store.
Personally, I'm very happy with "DownCast". I've given up on the apple podcast app, and DownCast seems to do everything I need. My whole family uses it.

Can't use the camera function in my ipod touch 4s while updated to iOS 6.0

I can't use the camera function in my ipod touch 4s while updated to iOS 6.0.
There is all black screen when I turn on my camera.
I open the restriction setting already.
thank you.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Is it legal to use the apple logo for wallpaper design?

Dear Applers,
is it legal to use the Apple logo for my wallpaper which I design and create.
I want to share this wallpaper on my website. The wallpaper are funny like others which already exists.
For example a wallpaper where the Apple logo looks like a donut and Homer Simpson wants to steal it....
Other example could be wallpaper with modern and nice design.
So is it allowed to share wallpaper with the apple Logo in the picture, so other users can download and use it as a wallpaper?
Best Regards from Germany
Christoph

Thank you for your help.
So does it mean, that I can't use it in any way?
I mean, I do not want to use the Apple logo for the website itself. So not for the layout, template or webdesign.
I just want to place the logo on my wallpaper pictures, which I want to offer as a download for mac users which like it to personalize their Backgrounds.
I mean there are thousands of websites like this? Are all the Admins doing this at own risk?
Hard to belive, that all these pictures, you see here are ilegal in the internet, isn't it?
https://www.google.de/search?safe=off&biw=1441&bih=910&q=apple+wallpaper&bav=on. 2,or.r_cp.r_qf.&bvm=bv.49478099,d.ZWU,pv.xjs.s.en_US.c75bKy5EQ0A.O&um=1&ie=UTF-8 &hl=de&tbm=isch&source=og&sa=N&tab=wi&ei=PujqUdGZHcu_POa1gUA
Thank you in advance that you are a part of this disscussion
Best Regards from germany.

How can i use the amp designer or pedalboard for software instruments in garageband 10

how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x

How can utilize/use the extended space in system.img ?

Hello Guru's
In Oracle VM , How can utilize/use the extended space in system.img ?
a) Increased the system.img size using the following command:
# dd if=/dev/zero bs=1M count=12960 >> /OVS/running_pool/18_test1/System.img
b) Verified the added size of system.img file at OVS server.
# ls -lh System.img
-rw-r--r-- 1 root root 19G Feb 9 20:58 System.img
c) Started GVM and additional size/memory is not shown ?
# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/xvda2 3984 2292 1652 59% /
/dev/xvda1 92 12 75 14% /boot
tmpfs 512 0 512 0% /dev/shm
+ Tried working with resizefs , resize2fs , cmd did not work.
(GVM is created using Oracle provided template)
+ am i missing anything ?
Oracle VM Setup Detail:
oracle-logos-4.9.17-7ovs
enterprise-linux-ovs-5-0.17
ovs-release-2.2-0.17
ovs-utils-1.0-33
kernel-ovs-2.6.18-128.2.1.4.9.el5
ovs-agent-2.3-29
Thanks in advance for your help.
Best Regards
Basu

I am not positive what you did is going to work, but it seems like you did the equivalent of imaging a small disk on a bigger disk. In that case, the first thing to do is update the partition table with fdisk. Start with fdisk -l in the vm for general information about the disk. Hopefully, the additional space will show. Then, work with fdisk to use the extra space. The easiest is to add a partition, then a file system on it. It is also possible to expand the last partition (you might have to delete it first), then expand what is on it (may be RAID, LVM, or the file system), layer by layer. As usual with fdisk, you run the risk of thrashing it all, so you may want to practice on a copy first. Obviously, the extra space can only be added to the last partition of the small disk.
If the situation is more complex, you may have to boot a VM with both the small disk and the big disk at the same time. If you boot the VM off of an iso DVD image, you can then shell out, then run fdisk to partition the big disk the way you want, then use dd to copy the partitions you want in the order you want from the small disk. I am pretty sure not all combinations will work, but you get the idea. You can then take the small disk out, and boot off of the big disk.
Come to think of it, you might just be better off with adding more space as a second virtual disk. You would then be free to partition/format it the way you want without messing with the first disk. Linux is so good with disk management, so many options.
As a general statement, though, I like to put some distance between the high level file systems and the low level disk partitions, so I use LVM (Logical Volume Manager).
Best of luck, keep us posted.

Can I use the Podcast logo/logomark in my publication?

Similar Messages

Maybe you are looking for