Can i use the same datasource which is already been used for another appln?

Hi All,
There is a datasource from r/3 copa which is already been used in another application. Is it possible for me to use the same data source to my Appln?
If so then pls guide me on that?
Thanks
pooja

Yes you can use it..
It depends actually on your requirement..
If you are already pulling that data into a DSO, then directly use that DSO in your applicaiton by doing a look up or by getting data from it...This will avoid duplication of data...
But if your requirement is not suffice with the DSO you already have then create your own custom and pull the data from the same datasource into it...

Similar Messages

HT1212 i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?

i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,

Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

I can not purchase the same apps as my friend purchased using his ID on my ipad

My ipad was borrowed by my friend, then he signed in to the itunes using his ID and purchased some apps on my ipad.
But now i have signed back using my ID in itunes on my ipad.
The problem is now using my ipad i can not purchase the same apps that he already purchased using his account.
On the itunes store showing as if i have purchased the apps then a pop up message said
"UPDATE IS unvailable with this apple ID
This update is downloaded with a different apple ID. Sign in with that apple ID and try again."
I have reset my ipad and i also have reset all setting in the setting options but it still doesnt help a bit
Can someone please help me with this issue?
Thank you

Is the app currently on your iPad ? If it is then delete it. Then try a soft-reset (i.e. reboot) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear (you won't lose any content).
After the iPad has restarted if you then go into the App Store app are you able to buy and download it with your account ?

I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

Hi there
I had the same trouble today, I kept entering the sky password but would not accept, my iMac and iPod work ok but just could not get my iPod to work. But I found the fault, the password is case sensitive and mine on sky is in caps, the up arrows on the keypad put the caps on,but after each letter you must put the caps back or it wil revert to lower case, I hope this may help you

HT3529 I have and iPod Touch, and my sister has an iPod touch. Both use the same Apple ID. If I use iMessage, can my sister see my messages?

I have and iPod Touch, and my sister has an iPod touch. Both use the same Apple ID. If I use iMessage, can my sister see my messages?

Yes.
I recommend that you
Create a NEW account/ID using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject. I was using a cord that went from larger square plug to larger square plug. So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

Thanks, Michael! I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed. Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk. Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait. :-)
Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed?
I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest? Two external hard drives? I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB. If this one is not reparable I could get two and do the same thing. I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

How can I keep the edited video which in project into Libray for re-edit ?

How can I keep the edited video which in project into Libray for re-edit later ??
As i used i movie 06 before....
after i imported the videos in to the library, then i can drag the videos to the timeline(now is project)
then edit it.
After that i can just drag all the timeline clips which is edited to the library.So I can keep it for next time if i wanna re-edit.
But Now if did all the editing at the library clips then drag to project, i can not drag the project clips back to library, so how can i keep it for my editing safty?
I do not wanna to edit again the same clips from the library!!! as i need to edit many different short clips together then export to individual videos, and i may need to re-edit.
or i can keep the edited video in project, then i can selected the clips which i willing to export, the rest video who in the project will not be export at the same video? I m wondering....
please help!!! Urgent!!

Just keep the project. Then you can just duplicate the project and make the next set of changes as needed. By duplicating the project, you are not duplicating the event, just the links to the event library.
This way you are not eating up disk space.
Does that help?

How can we capitalize the PR/PO, which are already booked in cost center?

We are creating a capital Project for our department. We have the structures ready and finalized with the budgets. But, the department has already done some commitments and expenditures in their cost center .Now, this expenditure and commitment values needs to be reflected in the report, so that correct values of assigned and available should be updated.
1) Pls. suggest a process using which we can transfer this amount. Is this to be done by an FI entry or else we need to commit using sanction request?
2) How can we capitalize the PR/PO, which are already booked in cost center?

Hi,
As we know the Contract is an Outline agreement for Quantity or Value for a particular Period with vendor.
Without mentioning Plant also we can make contract for the Purchase organisation level for particular Material for the entire period
Where as while creating PR -it is an Indent for the material requiement for the specific Plant so when you refer Agreement inthe PR creation time System will ask you how much quantity to what plant you want to place indent. where as In PO it ia an legal document so when you refer Agreement it will take all the details from Contract
i think you are clear with my points
With regrads
Shrinivas gangoor
Edited by: Shrinivas Gangoor on May 22, 2009 2:53 PM
Edited by: Shrinivas Gangoor on May 22, 2009 2:54 PM

I recently bought Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

I recently bought Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

It is possible that you downloaded the Creative Cloud trial of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, this will not interfere with your catalog, preferences and personal files.
Download the appropriate version from the link below and install, your license key will be accepted and everything will be fine.
Product updates

HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad. One code in the spreadsheet says it's already been used but shows no serial number or device name.

I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

HT1390 I can't transfer a rented movie from my iMac to my iPad. It get the following error message- the rental could not be transferred to the iPad because it has already been transferred to another computer or device. I have not transferred it to anywher

I can't transfer a rented movie from my iMac to my iPad. It get the following error message- the rental could not be transferred to the iPad because it has already been transferred to another computer or device. I have not transferred it to anywhere device.

Is the computer connected to the the internet?

HT6050 After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....

After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....

Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Hi, we trialed from central and have bought the plus version but have still been charged for another month of the trial. Would you be good enough to refund the charge please considering we have bought the main product?

Hi, we trialed from central and have bought the plus version but have still been charged for another month of the trial. Would you be good enough to refund the charge please considering we have bought the main product?

After much back and forth drama, and the assistance of one awesome person at Apple, and also a great iTunes representitive, they have agreed to refund me.
I have not yet recieved the refund but will post here when I do.
This has been a long and drawn out headache, but I am glad that finally things seem to be set straight.

BingAds API: Can we configure the same email id to get API access for multiple BingAds account ?

Hi Eric,
We help our customers to analyze their marketing performance. We have configured the email id e.g. [email protected] which has the API access to one of our customer BingAds Account. Now we are able to authenticate using Oath tokens and able to access customer
data using the given developer token.
Now i need your help to clarify the below.
1) Can i have the access to my other customer BingAds account using the same email Id i.e. [email protected] or Do i need have the two different users/email ids to access different BingAds account?
2) If it is possible to configure the same emailId/usert for different BingAds accounts , then i belive my Oauth tokens will be same in this case, but how about my devloper token , do i need to maintain two seperate developer tokens?
3) If its not possible to use the same email id for two BingAds account api access, is there any alternate way to have the common oauth authentication for both the accounts?
Thanks in advance.
Regards,
Sreekanth.
Sreekanth A

Hi Eric,
I have got to know from the BingAds support that i have to switch my account to Agency type to access multiple accounts data over API. But they only assist on this for Microsoft Managed BingAds account, but it can not access the data from BingAds account which
is managed by Yahoo.
If i need to create Agency type BingAds account which can have the API access to multiple BingAds accounts managed by Yahoo, what may be the process?
Can you please guide me on this? as of now i got the news is that to contact the Yahoo Account managers, if you have any more information on this , please let me know.
Thanks,
Sreekanth.
Sreekanth A

What information can I use to find out which software has been downloaded for my company?

Hello Adobe forums! I hope this is the right spot to put these questions.
This is the situation:
I work for a very small printing outfit in a very small town in the middle of nowhere, Canada.
Everybody that worked for the company that was involved with adobe in the past has now moved on, except people that can't help with this issue.
I have managed to slueth some information from some people here but nothing concrete.
Anyways, so far that I know that this company subscribed to some sort of Adobe subscription service that enabled them to upgrade as need be for an annual fee. At least this is what i've been told.
We have both a PC and a Mac version of Adobe Design Premium CS3, working on their respective computers. The reason I need to know whats going on is that the PC with CS3 is about to go kaput - So I've got a new PC. Now I need to transfer the design suite from one computer to another. I know I can have active two installations of the design suite per purchase, but I also know I can deactivate one activation and reactive it again elsewhere. Thats the option I want to pursue.
I have no idea what usernames were used to download these products, no idea which people in the company's history were responsible for acquiring these suites. I have a list of names and emails, and also I do beleive the company credit card has remained the same for many years, and so I have that as well.
I also still have the working and legitimate copies of Design Premium CS3. I do not have serial numbers for these programs because I dont have access to the emails that purchased them. I did however yesterday register the photoshop CS3 to the current email address I use now for adobe.com (although I haven't seen anything reflected in my account just yet - I understand it takes 24-48 hours for that to show up) So that I believe should at least be one step towards proving to adobe I exist and that my design suite is genuine.
So basically I'm looking for two things. One, I need to find out which account we used to acquire the software (With email addresses and a CC# should will I be able to find this?) and two, I need the serial number and a link to download CS3 Design Premium, which I'd imagine is dependant on the first objective.
(An interesting side note: in the Adobe folder on the dying PC there is an unistalled zip file containing CS4 Design Premium. I know the PC wont support CS4, so maybe thats why its not installed. Interesting that it is on there - is there any way i can tell if it was downloaded from a subscription service by jsut looking at the .7s zip file?)
Thanks for any help anyone can provide! Any further info I can give I will glady hand out, cheers!

Two thoughts:
(1)     It is possible that your Adobe software was the result of belonging to a now-discontinued Adobe Print Service Provider program where for a certain annual membership fee, print service providers were provided with (a) both a Windows and Macintosh license to the Adobe print-oriented software products (such as InDesign, Illustrator, Photoshop, and Acrobat) and (b) special direct product support as well as the ability to put your name on Adobe's website as a member of this program. The program ended over a year ago if I remember correctly.
(2)     You may wish to contact Adobe Customer Support (not Technical Support) and see if they can track down any and all licenses associated with your company. If you have the names of the former employees who worked with this software, it would be helpful. Likewise, if you were a member of the discontinued Adobe Print Service Provider program, you may have some options for upgrading/updating the software you have.
Unfortunately, you cannot get any more definitive information about your situation on these forums.
Good luck.
          - Dov

Can i use the same datasource which is already been used for another appln?

Similar Messages

Maybe you are looking for