Can I write data into DSO directly ( by editing it)

Hi Gurus,
Here I have an issue where I was asked to create an object in BI7 where I can enter data directly into that object regularly i.e day to day basis. Is it possible if yes please give me the navigations and links if available to fix my issue.
Best Regards
Mohan Kumar

Hi Mohan,
Writing data directly into DSO means, we had a scenario where in the user will be entering the data at the transaction sceen and the same moment it need to get into the DSO. For that we have used the transactional ODS which can be used to writing purpose. But one thing with that isit can have only the active data table.
Regards
Vijay

Similar Messages

Loading complex report data into a direct update DSO using APD

Dear All,
Recently, I had a requirement to download the report data into a direct update DSO using an APD. I was able to perform this easily when the report was simple i.e it has few rows and columns. But I faced problems If the report is a complex one. Summing up, I would like to know how to handle the scenarios in each of the following cases:
1.   How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
      key fields of DSO and the remaining to the data fields? Correct me.
2.   What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
      system and then include these in the DSO data fields to accommodate the extracted data ?
3.   How do I handle the Free Characteristics and Filters ?
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
     use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
     shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
I would appreciate if someone can answer my questions clearly.
Regards,
D. Srinivas Rao

Hi ,
PFB the answers.
1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
key fields of DSO and the remaining to the data fields? Correct me.
--- Yes , you can use the elements in the ROWS in the Key fields, but in case you get two records with same value in the ROWS element the data load will fail. So you basically need to have one value that would be different for each record.
2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
system and then include these in the DSO data fields to accommodate the extracted data ?
Yes you would need to create new Infoobjects for the CKF's and RKF's in the Report and include them in your DSO.
3. How do I handle the Free Characteristics and Filters ?
The default filters work in the same way as when you yourself execute the reoprt. But you cannot use the Free characterisitics in the APD. only the ROWS and cloumns element which are in default layout can be used.
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
--- Yes you would need to create 10 different APD's. Its very simple to create, you can copy an APD. but it would be for sure a maintance issue. you would have to maintain 10 APD's.
Please revert in case of any further queries.

Read Write Data into a MS Word document

The requirement I am fullfilling directly specifies the need to write data into a Microsoft Word Document and if Necessary, Read Back data from a Microsoft Word Document. The data will be simple text but as time goes on I anticipate the systems engineers may expand the requirement. I want to cross one bridge at a time so I am just concentrating on the text issue. I must do it from within a stand-alone application. Not through a server, not through ASP, not through a browser, just a stand alone application. It appears from my own investigation of the JAVA API that this is not possible. Regrettably, I am only a day or so away from switching to C# or VB to get this job done. My first question is
1. Can Java Do this?
2. If not, does Sun Microsystems have any plans to add this capabiliy?
3. Can we make recommendations to Sun to add this capability to JAVA?

1. Can Java Do this?Java can do anything but there is no built-in ability to do just that.
2. If not, does Sun Microsystems have any plans to add
this capabiliy?
3. Can we make recommendations to Sun to add this
capability to JAVA?Very doubtful! MS Office document formats are not completely open to the public - and they are weird! Supporting this capability would probably require an agreement with Microsoft and it would mean you had to change the API for every time Microsoft chooses to change the document formats.
But there are some open source tools that claim to be rather good at reading and writing MS Office files. Take a look at this one:
http://jakarta.apache.org/poi/index.html

Unable to write data into excel file when it's close

Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
        int result = -1;
        try{
            SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
            String actionDate = formatter.format(new Date());
            rbtName = rbtName.replaceAll("'", "''");
            artistName = artistName.replaceAll("'", "");
            String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
            sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
            System.out.println(sql);
            log.writeLog(sql);
            result = stmnt.executeUpdate(sql);
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
        return result;
    public int openConnection(){
        int result = -1;
        try{
            Class.forName(dbDriver);
            c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
            stmnt = c.createStatement();
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
            return -1;
        return 1;
    }Thanks

HI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085

Prob in loading data into DSO

Hi All,
I am loading the transaction data into DSO and it is loaded successfully till New Data table.....but when activating that data the icon for request for reporting is shown but the request is showing red....When I click on QM status, it says the request is (partially) activated and no further QM action possible.....what could be the error?
Thanks
Dora.

Hi,
There are a couple of places where you can see the activation progress.
1) To start with SM37 job log > (give BI_PROCESS_ODSACTIVAT or BI_ODSA*)
and it should give you the details about the activation job. If its active make sure that the job log is getting updated at frequent intervals. If its completed check the log for ODS activation.
2) For very huge number of records SM37 job log may not get update frequently. In that case you have a workaround.
Go to contents > Active Data table > No. of entries > This will keep on increasing at frequent intervals.
3) SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
4) Go to Activate button in Target > Request tab. Inside you can see a job log button. It will also show some log regarding the last activation.
5) If the Reporting icon has appeared near the request id in ODS. If it appears that may indicate that request is available for reporting
6) Check the request status in these tables.
Table RSICCONT table contains the requests that are actually loaded in a target.
Table RSMONICDP contains the request id of the fact table.
Table RSODSACTREQ contains information if an ODS is available for reporting/deleting inactive requests also possible.
Table RSODSACTUPDTYPE.
Thanks,
JituK

How to activate another worksheet in excel file and write data into it

Hi,
I am writing an automation program to collect test data and write the data to an excel file.
The excel file has several worksheets and now I can only write data to one sheet. Can anyone please let me know how to activate another worksheet and write data into it? Thank you very much.

You can do a search in the Example Finder for more Excel VIs.
They will give you a clearer idea of how to go about doing things in the way you need.
- Partha
LabVIEW - Wires that catch bugs!

Dumping data into tables directly

Hi there,
Is it possible to just dump data into tables directly (matching file structures)?
Or do we need to use GUI_UPLOAD and then insert them via ABAP statements?
Thanks,
Muji

Hi,
what is ur requirement exactly.
There are ways to upload data into database table.
u can use XI to uplaod data to SAP.
if it is user data creation, u can create a maintenance dialog and create data thru SE30.
But if u want to insert volumes of data and need them to be validated as well, u post them thru transactions. this is bDC.
If u want to upload master data, u use LSMW or direct input.
If u want to just do direct insert u need to do coding and map the data and insert intot he database,
but for all these u need abap coding which involves uploading and downloading.

Can not extract data into BW from SQL SERVER

Dear All,
I meet a problem to extract data from database(MS SQL Server 2000(sp3)) into BW now and can not extract data into BW ODS, even PSA, In the monitor, display yellow light(0 from 0 record), detail message just display message "data request arranged" "confirmed with: confirmation" in requests(message) step; "missing message: request received" in extract (message) step; "no data" in processing(data packet) step and so on. but in fact, there are two records in my database test table and DB connection is OK. Even I can extract data from another test oracle database into BW ODS successfully.
Our BW system has two BW applicaton server and use oracle database. the one application server locates on IBM AIX host. the another one locates on one NT server. the application server on NT server is used for data extration from MS SQL SERVER database into BW oracle database. and MS SQL SERVER and NT platform application server locate on same one host. DBSL was installed on the NT application server already. and DB connector also was created successfully for MS SQL SERVER and datasource also was generated. DBSL type is Kernel640-WIN-IA32bit-unicode. my BW system is ECC5.0/UNICODE/ORACLE. all table/view/field name of MS SQL server is upcase and have not any specific character. for example: ZDEMO etc.
wait your help.
Thanks in advance.
Billy

Hi Ravi,
Could you help me to get knowledge about the followings:
approximately how many records extracting and transfering from SAP R/3 to BIW in an organisation. for that how much time will take .
How to extract data from two are three source system to BIW. Kindly help me with step by step explanation .If any screen shots with documents pls fwd to my ID. "[email protected]"
Your help highly appreciated.
Thanks.
Hema

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

Can we write data stright to PTEX2000.

Hi All,
We are working on a Rostering integration project with SAP.
We wanted to Submit external timesheets to HR so thought of using CATS_INSERT02 IDOC.
Well what I could understand the process flow is.
Employee create a timesheet, dat is stored in CATSDB.
When its approved and relased its moves to PTEXDIR, PTEX2000 tables.
when we run CAT6 data from PTEX2000 is transfered to INFOTYPE 2002 in HR.
I just wonder can we write data stright to PTEXT2000 & or PTEXDIR eliminating CATSDB.
Ist here a IDOC available for this purpose..?
Your help in this regard is well appriciated.
Thanks & Regards,
Sai Krishna

Hi,
No, it's not possible with 5.6.2. Excel based templates are supposed to be coming but I don't know when the release date will be.
Thanks
Paul

Can I write dates or words on photos? In iPhoto.

Can I write dates or words on photos? In iphoto.

You mean across the fac of the shot? No. You'll need an external editor for that.
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

I want to write data into eeprom(93LC86) in parallel port using labview?

I want to write data into eeprom(93LC86) in parallel port using labview? Also I want to read data from EEprom.

Hi Mr. Mz,
after having a look to 93LC86-Datasheet I do not see a problem. The self-timing programming cycle of this Chip avoids timing problems; the rest is only logical stuff.
If you need more general info, how to use the parallel port, I recommend: http://[email protected]/ or
in case you need an example of SPI-Interface in LabVIEW with paraport - then write to: [email protected]
You are welcome
regards
wha

Which background process writes date into alert log file in oralce

which background process writes date into alert log file in oralce

Hi,
AFAIK, all the background process are eligible for writing information to alert log file. As the file name indicates to show the alerts, so background process have the access rights in terms of packages (dbms), to write to alert log.
I might be wrong also..
- Pavan Kumar N

I am using a 5s under IOS 7.1.1. How can I change the year field directly when editing an existing calendar entry?

I am using a 5s under IOS 7.1.1. How can I change the year field directly when editing an existing calendar entry?

Glad that helped.
Enjoy your iPhone!

How can FMS create a text file and write data into it in the Server application folders?

Recently, I writed a programe about creating a text file and writing data into it in the server application folder. My code is as following:
           var fileObj = new File("/MyApp/test.txt");
           if( fileObj != null)
                  if(fileObj.open( "text", "append"))
                        fileObj.write( "                                                      ———— Chat Info Backup ————\r\n" );
                        fileObj.close( );
                        trace("Chat info backup document :" + fileObj.name + " has been created successfully!");
But when I run it, FMS throw the error as following: File operation open failed ; TypeError: fileObj has no properties.
Can you help me ? Thanks in advance.
Supplement: The text file named test.txt doesn't exist before create the fileObj, an instance of File Class.

Is MyApp the name of the application directory, or is it a child of the application directory? If myApp is the app name, just use test.txt as the path flag in the file constructor.

Can I write data into DSO directly ( by editing it)

Similar Messages

Maybe you are looking for