Can image for blue pixels and report pixel x,y coordinates

Hi
I am not sure if I am posting in the right forum so please excuse me.
I have a number of images (100 +) which are 400 pixels by 400 pixels each. On these images I have a number of blue dots which are probababally 2 by 2 pixels each. I want to write a program that will scan an image for me and report the exact point of a blue dot back to me i.e. I want in pixels the x and y coordinates of the blue dots.
Notes
An image can contain zero or more blue dots.
Some blue dots may cross other blue dots (very rarely)
Urgent help needed please!!!
Antek

Crossposted: http://forum.java.sun.com/thread.jsp?forum=31&thread=499594&tstart=0&trange=15

Similar Messages

  • Is there any impact analysis tool for Oracle Forms and Reports

    Hi All
    We are curretly looking at tools available to do impact analysis in Oracle Forms and Reports. This is for the maintainance of a large Oracle application developed using forms and reports 10g. We use Oracle Designer but only to maintain the db structure and not for forms and reports generation. Our intension is to find out the impact of db model changes, stored procedure changes in Oracle Forms and Reports. Please suggest any tools that are currently used for this purpose.
    I remember manually maintaining the CRUD matrix for Oracle Forms and Reports for maintainance purpose. CRUD matrix will have the list of all the tables which are affected by the module. But this is a manual activity and hence the responsibility is with the dev team to keep the document updated. Please suggest if there is any alternative to this way which can be more effecient and less error prone...
    I also wonder how these are done in Oracle ERP? how the apps team in oracle is maintaining the forms and reports?
    Thnaks in Advance
    Mahesh Mathew

    Quest (the makers of TOAD) have a tool called SQL Impact which gathers data from forms, reports, triggers, packages etc.
    FormsMate is a simple, cheap alternative for comparing or searching in forms.
    http://www.jockvale.ca/products.html
    Alternatively, you can export forms to xml (with iff2xml90.bat) and reports to jsp (with rwconverter) and simply grep those and your sql scripts. There are grep tools for windows if you need.

  • Can I know where exactly I can go for an interface and an abstract

    can I know where exactly I can go for an interface and an abstract???
    with a simple program???

    You mean an example? Any introduction to Java textbook should have that.

  • Latest version available for Oracle Forms and Reports in 11g AS

    Deaer Friends,
    Please let me know latest version available for Oracle Forms and Reports in 11g Application Server and let me know whether it is supported in Windows - 64 Bit Platform
    Regards,
    DB

    DB,
    Oracle Forms and Reports 11g Release 2 (11.1.2) is the most recent forms and reports.
    If you're on 11.1.1.x (for example 11.1.1.5 or 11.1.1.4), please refer to http://docs.oracle.com/cd/E24269_01/doc.11120/e23975/upgrade_from_r1.htm for upgrade procedure.
    Otherwise, if you're installing it brand new, download Oracle Forms and Reports 11gR2 (11.1.2.0.0 from http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html
    HTH,
    Raj Mareddi
    http://www.freeoraclehelp.com

  • Render Quality of still images for Blu Ray?

    Hello,
    can anyone help me on how to control the quality of still images beeing rendered within Encore?
    Transcoding is for film only and on my full HD Blu Ray it seems, that still images or diashows are
    rendered in SD quality at best.
    Any hints appreciated!
    Cheers,
    Guenter

    Hello and thanks for the quick replies and especially the welcome greetings.....
    The images do match the resolution of the videos, they are all 1920x1080.
    I created the images with Photoshop and next to JPG I also tried the PSD,
    but it made to difference.
    They are not part of the videos, they are just pictures I've included using
    the diashow function within Encore. There is no transcode menu available
    for single images nor the diashow.
    The default transcode settings - which are used for video only afaik - are
    also full hd, full quality.
    Any other ideas?
    Cheers,
    Guenter

  • No usb keyboard or mouse after building image for M81,82,and 83?

    i have built an image using imagex and with dism but after imaging a machine (lets say a M83) it will take the image but once it comes to the screen to type the name i have no keyboard or mouse. let me be clear that this image is for a M81, m82 and an m83. i have injected drivers for the m83 but this will kill the keyboard and mouse on the m82. i have also tried to inject m82 drivers and this kills m83. so with that being said is there a universal keyboard and mouse drive that i can use for all three models. Or is there something i can modify to make it work on all three?

    Append "1" to the grub entry that you use to boot.  This will start the system at runlevel 1.  Login normally.  Run pacman -Syu to fully update the system.  Try reboot.
    Edit: Chg runlevel
    Last edited by skunktrader (2012-04-17 04:08:53)

  • System Image for G5 (PPC) and iMac (Intel Core 2 Duo)

    hello,
    I would like to know if there is a way to create a common system image Mac OS X 10.4.10 that I can "deploy" in out two mac labs. One with G5 (PPC-based machines) and the other with iMac (Intel-based machines).
    If yes, how can I do that ? with a script ?
    I tried to boot a G5 with image made on IMac and it didn't boot...
    Anybody can help me ?
    Thanks a lot for your cooperation,

    Welcome to Apple Discussions!
    As they are not comparable versions of Mac OS X, a dual boot configuration would be needed. One with a GUID (for Intel) formatting, and one with Apple Partition Map (for PowerPC). This Mac OS X hints page explains how to make a dual boot configuration:
    http://www.macosxhints.com/article.php?story=2006061610374449

  • Is Windows 7 64 bit support for Oracle Forms and Reports 6i version

    Hi All,
    Greentings!
    Its urgent requirement from customer to Install Oracle Forms and Reports 6i Client software in Windows 7 64 bit OS.
    Can any one please help me to download and Install the same. It would be great if you send me the download link and steps to Install.
    Many thanks in advance!
    Kind Regards,
    Mohan

    That is a very very old product. It does not look like it is certified on that OS.
    Forms 6i Documentation
    http://www.oracle.com/technetwork/documentation/6i-forms-084462.html
    From
    http://download.oracle.com/otn_hosted_doc/forms/forms/A73154_01.pdf
    1.2.1.2 Operating System
    This version of Forms Developer requires Microsoft Windows. Specifically, one of the following versions:
    Windows 95 (any version)
    Windows 98 (any version)
    Windows NT (Service Pack 5 or later)
    For certification you should check with Middleware Certification (MOSC)

  • Single Client Access Name for Weblogic Forms and Reports.

    I have a 2 node clustered system:
    Windows 2008 R2 64-bit
    Weblogic 10.3.3 (on each node)
    Weblogic Forms and Reports 11.1.1.3 (on each node)
    Database 11gR2 RAC 11.2.0.1 (on each node)
    The forms and reports are clustered and I can connect to each from each of the two servers and the cluster is working well.
    The database uses Single Client Access Name (SCAN) to present the database as if it were one server called dbserver1.
    I was wondering if there was a similar thing for Weblogic and what everyone else uses to present their application as a single name to the user.
    I tried using Windows Network Load Balancing, but this stops the database scan listeners from working.
    Thanks.

    Dear,
    Did you find an answer to your question back in 2009?
    We are facing the same installation architecture, but we do not find any concrete information regarding SCAN with Oracle Forms 11g
    Geert

  • Can i start oracle forms and reports 11g services in linux with opmnctl ?

    Hi:
    I am so confused with weblogic and forms 11g that i don't know nothing at all looll :)
    Someone told me that to start oracle forms i need to this
    [oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
    This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...
    Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
    Regards
    Ricardo

    Hi Ricardo,
    Someone told me that to start oracle forms i need to this
    [oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
    This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...After starting WLS_FORMS, you can very well send it to background.
    Press Ctrl+Z and then type bg it will move it to background
    >
    Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
    with just opmnctl we cant run Forms I believe, we need to have WLS_FORMS also running ..
    Forms requires ohs or wc to be up and running along with WLS_FORMS , thats is what is my understanding ..

  • Where can I download Oracle forms and Reports

    Dear All,
    I want to study Oracle Forms and Reports. Please get me some document about it and also let me know that where can I download the oracle forms and reports.
    Thanks in advance for your reply.

    Hello,
    If you are able to find the Forum place, you can also find the Middleware product page.
    http://www.oracle.com/technology/products/ids/index.html
    Francois

  • Compatability for Forms-5 and Report-3

    Does Forms-5 and Reports-3 connect to Oracle-8i.I get a message Ora-03121 no interface driver connected function not performed when trying to connect.
    So please suggest

    I can't find any matrix (as these are de-supported versions) but I have worked on Forms 5.0 and reports 3.0 with Oracle 9.0.1. And there were no issues. Thus, I may dare assume it should work with 9.2.0.8 as well, which is the terminal release for Oracle 9i.

  • Crystal  can support for  200 fileds in report

    Hi Experts,
    my client has the requirement like he has to view the 200 fields report with current data.
    my doubt is, will crystal can support for 200 fields width ? ..
    Present my client is using Excel to track this report.
    Can anybody please guide me
    Thanks,
    Manag

    Hello,
    It should but how are you going to format the fields to fit all of the info onto a page? If you do want to then try installing and HP Plotter so you can use a large page size. Customer will have to do the same.
    I suggest you write a SQL Script to export that many fields and use the DB Tools to do the exporting. It will be much cleaner.
    Also, suggest to your customer/user to no use Crystal Reports as a database Archiving tool. More efficient to use the DB itself to do that.
    Don

  • Tcode for HR Forms and Reports

    I am working on HR Forms and Reports. Can you suggest Which Transaction codes I have to use for Forms creation and changes.

    Use Tcode PE51 for maintaining forms

  • App-V 5.0 SP3 SQL Script modifications (KB3031340) Required for both Management and Reporting Databases?

    Can anyone confirm if I need to modify the InsertVersionInfo.sql and Permisioins.sql scripts for both the APP-V Management and Reporting databases?  KB3031340 only references the Management Database, but I suspect it is required for both.
    Thank You!

    It should only apply to Management Database. There weren't any changes to the Reporting DB AFAIK.
    Steve Thomas, Senior Consultant, Microsoft
    App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
    http://blogs.technet.com/gladiatormsft/
    The App-V Team blog: http://blogs.technet.com/appv/
    The MED-V Team Blog: http://blogs.technet.com/medv
    The SCVMM Team blog: http://blogs.technet.com/scvmm/
    “This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Maybe you are looking for

  • Text Message Format Question

    When I tap the top of the screen on a text message to scroll to the top where it gives you 3 options,it does not have 'call' on the top left button, but 'email'. Any idea how to change it back?

  • MacBook Air 11" Mid 2011 (Fan & CPU Usage & Kernel_task)

    Hello everyone. I have a small problem with my Mac which is about its fan noise and CPU usage. It was running FLAWLESSLY until like last couple of days after OS update where I started to notice really high CPU and Fan usage. But first, system specifi

  • HT1926 itunes cannot run because some of its required files are missing.  please reinstall itunes

    i cannot install itunes on my xp computer... when i install itunes, it downloads to the end, then gives me a warning that to reinstall itunes, so i go to repair and the useless piece of software uninstalls itself, so i hjave to start over again and i

  • Problem with sender RFC adapter

    Hi All I have created one RFC adapter for which i have created wrong business system and all then i have deleted that and i have created on more RFC adapter but when i am testing my scenario its taking the old one which i have deleted from the Integr

  • Batch No. in AP Invoice PLD

    Hi all, How to retrieve Batch No. in AP  Invoice PLD in SAP 2007B. I want to print batch no. regarding item in repetative area. when selecting batch no. from OIBT table ,it is showing multiple rows ,also retreiving the previous batch no. of that part