Can interactive SVG's be called from within a symbol in the yepnope function?

I'm hoping someone may have run across this before, I'm trying to access an interactive svg (called "map") from inside a symbol (called "world") in the compositionReady event from the stage. The image loads just fine as long as I have it directly on the stage, but for the project I'm working on it would be way more convenient to have the svg inside of a symbol since it's supposed to scale in sync with a bunch of other elements. I have tried everything I can think of to reference the svg inside the symbol, but nothing works.
My code from the compositionReady event looks like this:
yepnope({
          load: "http://cdn.edgecommons.org/an/1.0.0/js/min/EdgeCommons.js",
          complete: function() {
                    // enable svg access
                    EC.SVG.accessSVG( sym.$("map") ).done(              // this is the line where I'd like to reference the svg "map" inside of the symbol "world"
                              function(svgDocument){
                                        // event listener
                                        svgDocument.addEventListener("select", function(event){
                                                  // remember selecte part
                                                  sym.setVariable("selectedPart", event.target);
                                                  // show id
                                                  sym.$("selectedPartTxt").html(event.target.id);
It's the EC.SVG.accessSVG( sym.$("map") ).done part that I can't wrap my head around. I've tried to reference the "world" symbol with things like:
EC.SVG.accessSVG(
var mySymbolObject = sym.getSymbol("world");
mySymbolObject.$("map") ).done
or
EC.SVG.accessSVG( sym.$("world").$("map") ).done
but nothing is working!!! Does anyone know where I've gone wrong? Or perhaps it isn't possible to call an svg from a symbol?
Thanks for any advice you have!

Here is my code in a file I used as a sample. I put the bee in a symbol named world and it works correctly:
EC.SVG.accessSVG(sym.getSymbol('world').$('bees')).done(
          function(svgDocument){
                    // add event listener
                    svgDocument.addEventListener("select", function(event) {
                    // Remember selected part
                    sym.setVariable("selectedPart", event.target);
                    // show the id of the selected part in the textfield
                    sym.$("selectedPartTxt").html( event.target.id );
Let me know if this helps. I can post the sample if you want.
here is the sample: https://app.box.com/s/xb20izcmbmd0lgqfnbgu

Similar Messages

Can I make a database call from within my rss.xml file?

I have a rss.xml file for my web site which works just fine, but has to be manually updated each time my web site blog is updated. Is it possible to insert a sql query in my rss.xml file so it can pull the updated info automatically from my mysql db?
I know the rss.xml file will have to be renamed with a .php extension, will it still work?

I think this is what you are looking for[http://dev.mysql.com/doc/refman/5.1/en/xml-functions.html]
They are called XML functions that you can set up in an .php file to export the updated file name as rss.xml, though I think it will overwrite anything already in the .xml file.
If you care to dabble, you may already be a master, but there are some cool rss tutorials here [http://www.w3schools.com/rss/]
Hope this helps!

Can a Stored Procedure be called from a Rule (not using Scripted JDBC Adap)

Hello smart people,
Question: Can a stored procedure be called from a Rule without using the Scripted JDBC Resource Adapter?
What's Desired: The project has very strong sql developers and average at best Java developers. We have been successful at implementing the scripted JDBC Resource Adapter which makes use of Java Bean shells. The custom Java Bean shell contains code that calls a stored procedure. We are cool with that process.
However we would like to be able to set up a Rule that calls a Stored Procedure without jumping thru the Java Bean Shell layer. The Stored Procedures we will be developing will not access the tables in the Waveset database. Instead the Stored Procedures will be accessing custom tables in a custom database. The custom DBase will be housed on the same dBase server as the Waveset database.
Environment: Identity Manager 7.1. Oracle 10i, and Unix OS.
It seems to me that this task is possible, but the posts in this forum make it sound like perhaps it is not.
Do any of you smart people agree that it should be possible or better yet has anyone implemented such an approach?
Thanks.

We did this by putting all of the JDBC calls into a Java class, then instantiated that class and called the methods from within a rule. An example of a rule we used is this:
<Rule authType='UserMembersRule' name='List UserType'>
<block>
    <defvar name='adapter'>
      <new class='com.waveset.adapter.ScriptedJdbcResourceAdapter'/>
    </defvar>
    <invoke name='setResource'>
      <ref>adapter</ref>
      <invoke name='getObject' class='com.waveset.ui.FormUtil'>
        <ref>context</ref>
        <s>Resource</s>
        <s>Banner</s>
      </invoke>
    </invoke>
    <defvar name='jdbcHelper'>
      <new class='edu.bates.JDBCHelper'>
        <invoke name='getConnection'>
          <ref>adapter</ref>
        </invoke>
      </new>
    </defvar>
    <defvar name='userList'>
      <new class='java.util.ArrayList'/>
    </defvar>
    <invoke name='addQueryToList'>
      <ref>jdbcHelper</ref>
      <s>SQL QUERY HERE</s>
      <ref>userList</ref>
    </invoke>
    <ref>userList</ref>
</block>
<MemberObjectGroups>
    <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
</Rule>

How can we get a url for a "Meet Now" conference call from within the Windows Store App?

Hi,
Is it possible to get the url for the current meeting / new "Meet Now" call from within the Windows Store app?
You have the option of inviting your current Lync contacts, but I don't see a way of giving a URL to clients that would launch Lync on their device, or take them to the web app.
I can see how to get the link using the Outlook plugin, for pre-scheduled meetings. Is this link always the same and the one that should be used for an impromptu "Meet Now" meeting? It would still be good to know how to get this URL from within
the store app so I can tell clients where to get it.
Some people may be on Windows RT devices and not have access to the plugin in Outlook, and want to start a meeting at short notice and then invite others via email or pasting a link to them elsewhere.
Any help appreciated.
If I have answered your question, please mark it as the correct answer. If I have provided helpful information, please mark it as so.

Hi,
Agree with Holger, I check on my Lync Windows Store app and can't find the meeting URL as well.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Capturing log files from multiple .ps1 scripts called from within a .bat file

I am trying to invoke multiple instances of a powershell script and capture individual log files from each of them. I can start the multiple instances by calling 'start powershell' several times, but am unable to capture logging. If I use 'call powershell'
I can capture the log files, but the batch file won't continue until that current 'call powershell' has completed.
ie. within Test.bat
start powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > a.log 2>&1
timeout /t 60
start powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > b.log 2>&1
timeout /t 60
start powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > c.log 2>&1
timeout /t 60
start powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > d.log 2>&1
timeout /t 60
start powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > e.log 2>&1
timeout /t 60
start powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > f.log 2>&1
the log files get created but are empty. If I invoke 'call' instead of start I get the log data, but I need them to run in parallel, not sequentially.
call powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > a.log 2>&1
timeout /t 60
call powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > b.log 2>&1
timeout /t 60
call powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > c.log 2>&1
timeout /t 60
call powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > d.log 2>&1
timeout /t 60call powershell . \Automation.ps1 %1 %2 %3 %4 %5 %6 > e.log 2>&1
Any suggestions of how to get this to work?

Batch files are sequential by design (batch up a bunch of statements and execute them). Call doesn't run in a different process, so when you use it the batch file waits for it to exit. From CALL:
Calls one batch program from another without stopping the parent batch program
I was hoping for the documentation to say the batch file waits for CALL to return, but this is as close as it gets.
Start(.exe), "Starts a separate window to run a specified program or command". The reason it runs in parallel is once it starts the target application start.exe ends and the batch file continues. It has no idea about the powershell.exe process
that you kicked off. Because of this reason, you can't pipe the output.
Update: I was wrong, you can totally redirect the output of what you run with start.exe.
How about instead of running a batch file you run a PowerShell script? You can run script blocks or call individual scripts in parallel with the
Start-Job cmdlet.
You can monitor the jobs and when they complete, pipe them to
Receive-Job to see their output.
For example:
$sb = {
Write-Output "Hello"
Sleep -seconds 10
Write-Output "Goodbye"
Start-Job -Scriptblock $sb
Start-Job -Scriptblock $sb
Here's a script that runs the scriptblock $sb. The script block outputs the text "Hello", waits for 10 seconds, and then outputs the text "Goodbye"
Then it starts two jobs (in this case I'm running the same script block)
When you run this you receive this for output:
PS> $sb = {
>> Write-Output "Hello"
>> Sleep -Seconds 10
>> Write-Output "Goodbye"
>> }
>>
PS> Start-Job -Scriptblock $sb
Id Name State HasMoreData Location Command
1 Job1 Running True localhost ...
PS> Start-Job -Scriptblock $sb
Id Name State HasMoreData Location Command
3 Job3 Running True localhost ...
PS>
When you run Start-Job it will execute your script or scriptblock in a new process and continue to the next line in the script.
You can see the jobs with
Get-Job:
PS> Get-Job
Id Name State HasMoreData Location Command
1 Job1 Running True localhost ...
3 Job3 Running True localhost ...
OK, that's great. But we need to know when the job's done. The Job's Status property will tell us this (we're looking for a status of "Completed"), we can build a loop and check:
$Completed = $false
while (!$Completed) {
# get all the jobs that haven't yet completed
$jobs = Get-Job | where {$_.State.ToString() -ne "Completed"} # if Get-Job doesn't return any jobs (i.e. they are all completed)
if ($jobs -eq $null) {
$Completed=$true
} # otherwise update the screen
else {
Write-Output "Waiting for $($jobs.Count) jobs"
sleep -s 1
This will output something like this:
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
Waiting for 2 jobs
When it's done, we can see the jobs have completed:
PS> Get-Job
Id Name State HasMoreData Location Command
1 Job1 Completed True localhost ...
3 Job3 Completed True localhost ...
PS>
Now at this point we could pipe the jobs to Receive-Job:
PS> Get-Job | Receive-Job
Hello
Goodbye
Hello
Goodbye
PS>
But as you can see it's not obvious which script is which. In your real scripts you could include some identifiers to distinguish them.
Another way would be to grab the output of each job one at a time:
foreach ($job in $jobs) {
$job | Receive-Job
If you store the output in a variable or save to a log file with Out-File. The trick is matching up the jobs to the output. Something like this may work:
$a_sb = {
Write-Output "Hello A"
Sleep -Seconds 10
Write-Output "Goodbye A"
$b_sb = {
Write-Output "Hello B"
Sleep -Seconds 5
Write-Output "Goodbye B"
$job = Start-Job -Scriptblock $a_sb
$a_log = $job.Name
$job = Start-Job -Scriptblock $b_sb
$b_log = $job.Name
$Completed = $false
while (!$Completed) {
$jobs = Get-Job | where {$_.State.ToString() -ne "Completed"}
if ($jobs -eq $null) {
$Completed=$true
else {
Write-Output "Waiting for $($jobs.Count) jobs"
sleep -s 1
Get-Job | where {$_.Name -eq $a_log} | Receive-Job | Out-File .\a.log
Get-Job | where {$_.Name -eq $b_log} | Receive-Job | Out-File .\b.log
If you check out the folder you'll see the log files, and they contain the script contents:
PS> dir *.log
Directory: C:\Users\jwarren
Mode LastWriteTime Length Name
-a--- 1/15/2014 7:53 PM 42 a.log
-a--- 1/15/2014 7:53 PM 42 b.log
PS> Get-Content .\a.log
Hello A
Goodbye A
PS> Get-Content .\b.log
Hello B
Goodbye B
PS>
The trouble though is you won't get a log file until the job has completed. If you use your log files to monitor progress this may not be suitable.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Making an RFC call from within the VM container

Hi all,
since a long time I am searching for information on how to implement an RFC call from within the VMC. The problem is that we have implemented several (p)functions in ABAP and we need to implement them in JAVA.
Now I am searching for a way how to just call the already existing pfunctions???
Is it possible to read CRM DB tables too?
Thank you in advance
Boris

Hi Freeto,
This may be due to the Network Failures.
If you have triggered a job then because of the Network fluctuations the system may not respond properly and cannot execute the job.
So, this is the cause for the failure.
Hope you understood.
With Regards,
Ravi Kanth

Is it allowed to make a rmi call from within an ejb??

Hello,
Am I allowed to make a rmi call from within an ejb such as:
String host = "localhost";
RemoteObject ro = (RemoteObject) Naming.lookup("rmi://"+host+"/MonServeur");
ro.myMethod();
package pack;
import java.rmi.Naming;
import java.rmi.RemoteException;
import java.rmi.server.UnicastRemoteObject;
public class MyRemoteObject extends UnicastRemoteObject implements RemoteObject {
    public MyRemoteObject() throws RemoteException {
    public void myMethod() throws RemoteException {
        System.out.println("toto");
    public static void main(String[] args) {
        try {
            RemoteObject ro = new MyRemoteObject();
            Naming.rebind("MonServeur", ro);
        } catch (Exception ex) {
            ex.printStackTrace();
}Is it allowed by the spec?
Is it good design?
Thanks in advance,
Julien Martin.

Allowed - yes
Good design - no, in my opinion.

When can we publish Air 3.0 from within Flash IDE?

Hi,
I am very eager to get started on developing with Air 3.0.
I'm using Flash CS5.5, but natively Air 3.0 is not available from within the IDE. I know I can publish using the command line, but this is really a bit to complicated for me.
Can anyone tell me if and when we can expect an update for Flash CS5.5 so we can publish Air 3.0 files from within the IDE directly?
Thanx!

There are two ways of being able to publish to AIR 3,0 from within Flash CS5.5. You can either rename the AIR2.6 folder and put in the AIR3.9 folder, renamed to AIR2.6. That, of course, won't let you do code completion on new features, or see any interface changes. Or you can follow the long winded overlay process, and then would be able to do code completion.
Are you saying that the long winded overlay way still doesn't give an option to publish with captive runtime? When you said that copying the SDK wouldn't give new UI options, that made me think you were saying that the more elaborate overlay would would.
So, users are then stuck with FB4.6 public beta, command line, or waiting for "Flash Next" before being able to publish captive runtime Android apps.

Can a report in ERP called from CRM system using RFCs??

Hi All,
Please let me know if this is possible, if so , how?
Can a report in ERP called from CRM system using RFCs??
Thanks
Siva

Yes, you should make an RFC function in ERP and inside the
function you can call the report with a SUBMIT. Then in CRM you can call the RFC function...
Best regards,
Iván
P.D.: Give points if answer helps!!

Can a Web Service be Consumed from within JSX

Hi all,
In CS5, can a web service be consumed from within JSX, and if so - how?
TIA,
mlavie

Kris,
Thanks! Exactly what I needed!
mlavie

What is the name of the name of the app that I can use to make free calls from iPhone to iPhone?

What is the name of the app that I can use to make free calls from iPhone to iPhone ?

You mean Whatsapp messanger?
WhatsApp Messenger is a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS.
NO calls.
FaceTime, Skype and Viber are the most popular. (at least here in Greece)

Can`t connect to business catalyst from within Dw. How to fix??

Can`t connect to business catalyst from within Dw says there is a server error but internet connection good. Need to publish asap please help !! Was working fine earlier in the day but now refuses. Have tried Muse as well but it can`t reach Bc as well........

Business Catalyst System Status
BC Status
System Updates Forum
Nancy O.

I can't complete a facetime call from my iphone 4 to a friend's ipad 2. any suggestions?

I can't complete a facetime call from my iphone 4 to my friend's ipad 2. Any suggestions?

Hi pacermaker man,
Thanks for visiting Apple Support Communities.
I suggest going through the the troubleshooting steps in this article first if you are not able to make a FaceTime call to another iOS device:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
Jeremy

Can I I place a call from my iPhone 5s using USB connected iMac

I was pleasantly surprised when I found my iMac (2012-Yosemite 10.10.2) could be notified and answer calls from my USB connected iPhone 5s (OSx8.2).
Question: Can I also place a call from my iMac; and if so, How? Is there an app for that?

USB connection has nothing to do with it. They have to be on the same WiFi network. It's part of 'Continuity' in OS X Yosemite and iOS 8. You can place calls using FaceTime on your Mac.

I can't receive texts or calls from certain phones

I can't receive texts or calls from at least 2 AT&T phones and at least one sprint iphone...I've reset the settings, deleted threads, called my carrier (tmobile) to make sure there are no blocks in place. It's weird because I can't even receive texts from tmobile or my bank! My bill is paid and I do get messages from other numbers. Can anyone help?

Finally got through to talk to a very helpful technician at EE by selecting account query rather than technical problem on the automated answering system on 150. A reset by EE sorted the problem out and the phone is working fine again.

Can interactive SVG's be called from within a symbol in the yepnope function?

Similar Messages

Maybe you are looking for