Can it create automaticaly a batch classification in PI-Sheet management ?

Hi all,
Context:
In a PI Sheet management (by CO58 transaction / SAPLCOCP0 prog.) a new batch number of produced material is created, then after validation this batch is
created automatically into inventory via the 'SEND PROCESS MESSAGES NEW"
Job (this execute RCOCB002 prog. which activate CO51 transaction .
NB: I'm working in SAP version 3.1i !!
Questions:
1 - is it possible to create automatically batch classification at the
same time with this job ? How ? (I didn't found correct user-exit )
2 - If so is it possible the inspection plan will overwrite the values
of the batch classification ? If this is the case, is it possible to
prevent it to do it? How ?
Many thanks for your responses.
JJE

Hello Stuti,
Will the PI category PROD_2 helps you in achieving this. Incase of further concerns,please revert back.
Thanks,
Mahesh

Similar Messages

How can I create a one image per page caption sheet that includes the description in Bridge?

I am trying to find a way to create a one-image-per-page caption sheet for my workflow. I currently place each image into Word and copy the description onto the document, then repeat for each image. I am hoping that there is a way to automate this process using Bridge. I know that it can be done using Lightroom, however, that is not currently an option for me. Is this something that can be done or am I bound, like Sisyphus to Microsoft Word? I have a very limited grasp of scripting, but I feel like this is possible.
Thanks for any help.

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

Can we create a cost element for a Balance Sheet account?

Hi folks,
Is it possible to create a cost element for a balance sheet account? If yes, what are the scenerios we would need it and how is it done?
thanks in advance

Hello
Please review the below information regarding cost elements category 90 : Financial Accounting Balance Sheet Accounts
Category 90 is automatically assigned when you create cost elements in CO whose   general ledger accounts in FI are asset reconciliation accounts
(special balance sheet accounts), not income statement accounts. You
cannot change this category in CO master data maintenance.
FI does not require CO account assignments to cost elements of
category 90. However, if you enter an account assignment, it is only
recorded statistically for real objects.
Category 90 allows you to check order or project budgets for fixed
asset procurement. To do so, enter the investment order or WBS element
in the corresponding field in the asset master. The Asset Management
component ensures that the order or element automatically appears in
the document when you access the asset procurement.
The R/3 System debits the order/WBS element statistically in the
Controlling component, which you can then monitor with availability
control.
You can treat cost elements of category 90 as activity-independent as
part of cost center planning.
Also see note 75980 for further information. From the note:
The use of cost element category 90 is only provided in the standard
system in the following two cases:
1. As of Release 3.0G, asset acquisitions and down payments which are
      assigned directly to a fixed asset or asset under construction can
      be assigned to an account on internal orders or WBS elements
      statistically. In this manner, for example, an availability check
      can be triggered on the order or the WBS element for asset posting.
2. As of Release 4.0, cost elements of category 90 can also be created
      for material stock accounts to display material make-to-order stocks
      on sales orders or customer projects.
Regards
Javier Reviriego

Can't create a new batch or open the batch monitor

I just installed Final Cut Studio 2 and everything works fine except for Compressor. When I open the program nothing comes up and I can bring up all the windows manually except for the batch monitor which is obviously needed in order to compress files. Any ideas on how to fix this?

I just installed Final Cut Studio 2 and everything works fine except for Compressor.
Ok, so Compressor isn't working. What signs are being presented that tell you this?
When I open the program nothing comes up and I can bring up all the windows manually except for the batch monitor which is obviously needed in order to compress files.
Wait a minute, you just said that Compressor isn't working. If I understand you correctly, you can open the application. It is also my understanding that you don't have any idea how the Compressor interface works.
The Batch Monitor is a separate application which is only used to monitor batches that have already been submitted from Compressor. That's all it's used for, it's just a monitor. Think of it this way, it's the gas gauge on your car's instrument cluster, it just tells you how much fuel is left in the tank, it's not the tank itself.
Here's a pretty quick overview on how and when to use Compressor:
http://www.pixelcorps.tv/macbreak153
What specific problem are you having with Compressor? Have you added a job that isn't being submitted?

How can I create User Entered Additional Data Points in Credit Management?

I currently have a requirement to create additional data points in Credit Management (11i) that require a data analyst to input the value so that the score can be calculated.
For example: Does customer have a Qualified Audit Report?
If YES = +10 points added to score
If NO = 0 points added to score
I was able to add an additional data point and the case folder was assigned to an analyst, however when opening the case folder to input the missing data, the additional datapoint was not included in the case folder. Does anyone know what I may have missed in the setup?
Data Point was defined as follows and added to a checklist called TEST.
Data point: Unqualified
Category: (none)
Parent: (none)
Application: Receivables
Scoreable: Y
Enabled: Y
PL/SQL Package: (none)
Function: (none)
Thanks in advance.
Shauna
Edited by: sphelps on Sep 22, 2011 8:29 AM

The setup described above was correct. The datapoints did not show up in the case folder until the next day. I am assuming that maybe the changes required a bounce or a background process of some sort.

How can i create inputschedule and Reoprt in single work sheet???

Hi experts,
Can you please tell me how do i create input schedule and report in one single work sheet???
Also please share How to guide of the same if you know.
Regards,
Charly

Hi charly, your question is quite interesting, obviously using workbook options you can either set your workbook to an Input Schedule or Report.
If you need to submit data, then obviously the workbook option has to be Input Schedule.
assuming you are using EVDRE's which are updateable as long as the Current View permits and Input Schedule flag is set:
If you define 'report' loosely as an area of the excel workSHEET which is read only, then you can lock the cells of the report area and use excels protect worksheet function.
If you are using EV formulae to return data (such as evget, evsnd) then you can use the EVGET function to ensure data is only flowing one way.
Hope this helps,
Hiren

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

Want to find out how a batch classification is used

Hello
I have previously sent out a message and the idea given was not very helpful.
Anyway, this is my question:
I have found a class and its characteristic which was setup in the system and I would like to know how this classification` is being use in the system.
For example, I would like to know which process (i.e. during goods receipt, during sales order creation, during production, during warehouse) is using this classification to perform their transaction.
Do you know how to find out this kind of information in the SAP system?
Thanks
Tuff

Do you want to know how the batch classification is used in general in SAP or how it is used in the system where you found it?
In the latter case make an interview with the users, any process that has to do with stock can make use of the batch classification
In general is classification exact what the word "classification" means. You describe something in more detail in an organized way. Classification is a modification free way to add own "fields" to standard objects, the user can immediately search in classification without an extra effort to develop a search help.
The batch classification can be used in a batch determination to to enable SAP to automatically search for batches with certain characteristics.and assign them to documents like sales order, delivery, goods movements, transfer orders, and production/process orders.

Can I create folder in my iPod

I have 30GB iPod and finding it difficult to manage music songs.
1.Can I create folders inside my iPod? If yes, how many levels?
2.Can I create Playlist inside playlist? I want to manage my songs in different levels.
Eg:
Created a Playlist : MyFavSongs
Added all music files to above playlist MyFavSongs
so the path in my iPod is:
Music->MyFavSongs-><List of all songs>
Can I create something of this path
Music -> HitEnglighSongs -> MyFavListOfSongs1-> <List Of Songs>
Music -> HitEnglighSongs -> MyFavListOfSongs2-> <List Of Songs>
If yes, how?
thanks,
-Rajeev
Windows Windows XP Pro

You can create a Smart playlist to contain songs just as you would create folder.
Where the songs are maninained (folders) shoul be transparent/irrelevant to the user as long as you can view/listen/sort them.
If you want all songs of Genre Rock, add that as a criteria in the Smart playlist.
If you also want to include all Meat Puppets music, add that as a criteria.
And include only songs in these that are only 5 star rated.
And yes, you can include a "sub" playlist.
Make a new smart playlist and simply have the first criteria Playlist is the one created above.
Mkae the nxt criteria whatever you want.

Create table with storage parameters in a locally managed tablespace

Hi,
Can we create object with storage parameters in a locally managed tablespace.
CREATE TABLE my_hash_table_6 (
name VARCHAR2(30),
value VARCHAR2(4000) )
STORAGE (
INITIAL 1M
NEXT 512K
PCTINCREASE 0
MINEXTENTS 2
MAXEXTENTS UNLIMITED )
users default tablespace is locallly managed.
Then this table's extent management will be managed as per the tablespace or as the storage parameters which
were specified at the time of table creation.

Why don't you try it yourself ?
TEST@db102 > select * from dba_tablespaces
2 where TABLESPACE_NAME='USERS';
TABLESPACE_NAME                BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS    CONTENTS LOGGING   FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION   BIG
USERS                                8192          65536                       1
2147483645                   65536 ONLINE    PERMANENT LOGGING   NO LOCAL
SYSTEM    NO AUTO   DISABLED NOT APPLY   NO
TEST@db102 > CREATE TABLE my_hash_table_6 (
2 name VARCHAR2(30),
3 value VARCHAR2(4000) )
4 STORAGE (
5 INITIAL 1M
6 NEXT 512K
7 PCTINCREASE 0
8 MINEXTENTS 2
9* MAXEXTENTS UNLIMITED )
TEST@db102 > /
Table created.
TEST@db102 > select * from user_segments
2 where segment_name='MY_HASH_TABLE_6';
SEGMENT_NAME
PARTITION_NAME                 SEGMENT_TYPE       TABLESPACE_NAME
     BYTES     BLOCKS    EXTENTS INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE FREELISTS FREELIST_GROUPS BUFFER_
MY_HASH_TABLE_6
                               TABLE              USERS
   2097152        256          2        1572864                       1
2147483645                                         DEFAULT
TEST@db102 >

Create a recovery catalog by using the Enterprise Manager Console

Dear Sirs:
I am using the Oracle9i database release 2. After installing the management server and running the Enterprise Manager Configuration Assistant, there was no recovery catalog and no CATTBS tablespace created. According to the Help and to your documentation entitled Oracle Enterprise Manager Configuratrion Guide this recovery catalog and CATTBS tablespace should be created automatically.
Of course I am not running any target database on the same machine.
How can I create a recovery catalog by using the Enterprise Manager Console, and not by using the rman command prompt?
Please its urgent and I need an answer as soon as possible.
Thank you in advance with best regards

Dear Sir:
Thank you very much for your reply, but unfortunately it didnt help me. This article is repeating what is mentioned in the Help and the documents that I downloaded earlier. As I said earlier I know how to setup the recovery catalog by using the rman command prompt, but I couldnt do it by using the Oracle Enterprise Manager Console. By using the wizards it is supposed to be created automatically but nothing of this happened.
Please I need help urgently.

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

Abap Why Delivery no. can't creat batch number when PGI?

Hello.
Now I am working on PGI. I use the enhance to create default batch. But the delivery no. batch number can't be created when PGI.
It only can be created when LV01N creating dn no.
So can you offer me some help? So bad.....
Thanks for your help.

Hi,
You can follow a different approach. Send the output of the Smartform to the spool.
You have a Function Module to read the spool and convert it to PDF . Then there is one more function module to attach the PDF and send it as a mail.
You need to configure SMTP in Tcode : SCOT.
Search the forum with emailpdfattachment
You have umpteen postings available.
Pls reward if useful.
Regards,
Laxman Nayak

Automatic batch classification with procedure on goods receipt does not wor

Hi,
I have a material with batch classification.
The material has two characteristics.
One is a number called VALUE.
The other is also a number (called CONVERSION) and shall be deived from the first.
A procedure is created and assigned to the second characteristic.
$SET_DEFAULT ($SELF, CONVERSION , $SELF.VALUE / 6000)
When I post a goods receive (movement Type 501) the characteristics can be filled . The field VALUE is set with 12000.
I was expecting the characteristic CONVERSION to be calculated as '2' and filled by the procedure.
This is not the case.
If however, I try to fill it manually, the system accepts only the calculated value '2'. Otherwise an error is shown.
How can I force the system to calculate and fill the second characteristic when insserting a value in the first ?
Thanks for any help.

Hi Marcus,
i have the same problem with movement type 101.
How did you solve this issue?
Can you help me.
Thank you.
CM

Can it create automaticaly a batch classification in PI-Sheet management ?

Similar Messages

Maybe you are looking for