Can JDBC adapter be scheduled to call stored procedures

Can JDBC adapter be scheduled to call stored procedure in other database passing previous date as input parameter

Hi Gurus,
actually our scenario is jdbc->XI( <-RFC->)->File
Here our payload is around 5000 records
can it be advisable to use rfc synchronous communication.
The scenario will be exected only in night times.so can we schedule the adapter as we are using sp9.
If not what must be the good design approach.
And also after scheduling to a perticular period ,if there is any down time of XI server,will the process start immediately after the sever up or it will again watch for that perticular time.

Similar Messages

Can't Set Item Value After Calling Stored Procedure

In a forms6i program unit, I call a stored procedure. The stored procedure executes successfully. Then I set the value of a date item on a data block to sysdate.
When I run the form and execute the program unit the stored procedure executes successfully, but then the program unit gives me a No Data Found error when I set the value of the date item on the block. The value of the date item never changes. However, if I comment out the call to the stored procedure, the date item changes to sysdate and there is no error message generated.
Just to be sure, I moved the logic to set the date item value to a separate button on the form. Then I re-ran the program unit. The stored procedure executed successfully. Then I clicked the button to set the value of the date field on the block, which gave me the same no data found error.
Then I commented out the call in the program unit and re-ran the test. The program unit executed. Then I clicked the button to set the date value in the block and it was set to sysdate with no errors.
Why can I not set the date item after running a stored procedure?

Seems like a MSDTC config issue
See if this helps
http://support.microsoft.com/kb/2027550/en-us
http://zarez.net/?p=1469
http://danieladeniji.wordpress.com/2013/03/06/microsoft-sql-server-linked-server-error-the-partner-transaction-manager-has-disabled-its-support-for-remotenetw/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

JDBC-Adapter: Several inserts in a stored procedure possible?

Hello,
I'm using the JDBC-Adapter for writing data to an oracle database.
At the moment, the data are mapped in the XI to several stored procedures(SP), one SP for each line. In this way, the data will be written to a temporary file. These data will be polled by Oracle then, to write them in the final table in one session.
Is there a way to avoid the temporary file? I mean, is it possible to give over an array from XI to Oracle in only one SP?
Thanks,
Juergen

Send all of your data to one SP and in the SP write the logic. One thing is SP will not support repeating strucutures. You might have to send an XML stream to one data field of the SP and the SP should parse it to DataSet or RecordsSet.
VJ

Calling Stored Procedure without JDBC-Adapter

Hallo,
as it is not possible calling Stored Procedures with the parameter Typ Record in Oracle my question: It is possible connecting to DB using native java-code for example in Mapping?
Thanks in advance,
Frank

Hi Frank,
Maybe you can use the DB look up using the JDBC adapter in your mapping.
Just check this blog for the same,
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
As for calling an Oracle Strored Procedure, it is possible using a RECEIVER JDBC adapter, but not a SENDER JDBC adapter.
<i> import the jdbc-driver (oracle) in an archive in Designer.</i>
Also, this imported archive should be under any Namespace, but, it should be in the same SWCV as the one in which the mapping is being executed.
Regards,
Bhavesh

JDBC-Adapter-Receiver Calling Stored Procedure with Input-Typ Record

Hallo,
I´ m trying calling a stored-procedure with two input-parameter; one of typ record (oracle) and one of type tabel of records. Is this possible (I think there are only types like string, integer etc. possible)? When not is there another possibility to work with that type?
Thanks in advance,
Frank

Hi Frank,
I think stored procedures will not take Array of Records as a Input. If you want to make a loop funtionality etc then JDBC adapter will work accordingly. You need to just call the stored procedure from the JDBC adapter. It will work for the array of records(multiple occurences).
Receiver JDBC Procedures.
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Alternative option is you can make use of Java Proxy and from there you can call stored procedure ..I think it is possible.. not tried.
Hope this helps
Regards,
Moorthy

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Calling Stored Procedure from Oracle DataBase using Sender JDBC (JDBC-JMS)

Hi All,
We have requirement to move the data from Database to Queue (Interface Flow: JDBC -> JMS).
Database is Oracle.
*Based on Event, data will be triggered into two tables: XX & YY. This event occurs twice daily.
Take one field: 'aa' in XX and compare it with the field: 'pp' in YY.
If both are equal, then
if the field: 'qq' in YY table equals to "Add" then take the data from the view table: 'Add_View'.
else if the field: 'qq' in YY table equals to "Modify" then take the data from the view table: 'Modify_View'.
Finally, We need to archive the selected data from the respective view table.*
From each table, data will come differently, means with different field names.
I thought of call Stored Procedure from Sender JDBC Adapter for the above requirement.
But I heard that, we cannot call stored procedure in Oracle through Sender JDBC as it returns Cursor instead of ResultSet.
Is there any way other than Stored Procedure?
How to handle Data Types as data is coming from two different tables?
Can we create one data type for two tables?
Is BPM required for this to collect data from two different tables?
Can somebody guide me on how to handle this?
Waiting eagerly for help which will be rewarded.
Thanks and Regards,
Jyothirmayi.

Hi Gopal,
Thank you for your reply.
>Is there any way other than Stored Procedure?
Can you try configuring sender adapter to poll the data in intervals. You can configure Automatic TIme planning (ATP) in the sender jdbc channel.
I need to select the data from different tables based on some conditions. Let me simplify that.
Suppose Table1 contains 'n' no of rows. For each row, I need to test two conditions where only one condition will be satisfied. If 1st condition is satisfied, then data needs to be taken from Table2 else data needs to be taken from Table3.
How can we meet this by configuring sender adapter with ATP?
================================================================================================
>How to handle Data Types as data is coming from two different tables?
If you use join query in the select statement field of the channel then whatever you need select fields will be returned. This might be fields of two tables. your datatype fields are combination of two diff table.
we need to take data only from one table at a time. It is not join of two tables.
================================================================================================
Thanks,
Jyothirmayi.

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Weird Problem calling Stored Procedure using JDBC

Scenario is..
I have J2EE application and calling stored procedure using JDBC.
My application connects to instance "A" of testDB.
Schema "A" does NOT own any packages/procedure but granted execute on oracle packages/procedures that reside in schema "B" of testDB.
In java code I call procedure(proc1) in package(pac1) which internally calls procedure(proc2) in package(pac2).
The problem occurs when procedure pac2.proc2 is modified. After the modification, my java code fails and throws an exception "User-Defined Exception" and I am also getting "ORA-06508: PL/SQL: could not find program unit being called". This clears up only if I bounce the web container. (This doesn't happen if I modify pac1.proc1 and run my application)
Has any one faced this problem? Please suggest if any thing can be changed in jdbc code to fix this problem.
Thanks

Hi,
I assume these are PL/SQL packages and that the changes are made at the package specification level?
If so, it looks like you are hitting the PL/SQL dependencies rules. In other words, if the spec of proc2 is changed, then proc1 is invalidated, since proc1 still depends on the old version of proc2's spec. As a result, if you try to run proc1, its spec must either be explicitly rewritten before it could run again or implicitly recompiled first, if the (implicit) recompilation fails, it won’t run.
Kuassi http://db360.blogspot.com

JDBC performance calling stored procedures

Hi,
We have an java application which makes calls to PL/SQL stored procedures. We have one 'database server' component which handles all the database interaction, and other components which connect to it using CORBA.
The problem is that with everything running, certain queries are taking from 17 to 30 seconds to come back, but when you run the same sql from SQLPlus, you get the results back in about 2 seconds every time.
We're using a connection pool, but this doesn't seem to be the problem, as we put in diagnostics and it takes no time at all to get a free connection.
The time is taken up doing a getCursor() to get the result set back. We register the cursor as an output parameter, and open it from within the stored procedure.
Anyone any suggestions?
Thanks,
Neil.
null

Hi ,
You can call stored procedure using JPA (eclipselink API).Below is the sample code
ReadAllQuery readAllQuery = new ReadAllQuery(Employee.class);
call = new StoredProcedureCall();
call.setProcedureName("Read_All_Employees");
readAllQuery.useNamedCursorOutputAsResultSet("RESULT_CURSOR");
readAllQuery.setCall(call);
List employees = (List) session.executeQuery(readAllQuery);
Regards,
Vinay

DB adapter calling stored procedure and change database schema

Hello,
when I create DB adapter which call stored procedure I find that is reference to DB schema in JCA file. Other DB adapter operation (select, insert, delete) store only connection-factory location.
What happend when I move procedure to another DB schema or rename DB schema?
It is only about change SchemaName in JCA file?
Thank you.

It sounds excelent.
I try it. Change JCA file and redeploy SCA of service.
Next I change user in data source (password is the same for both schemas). Save and activate changes. Update deployment of DBAdapter.
Select operation on service works but return data from old schema.
Call stored procedure fail with exception:
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'delete' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the NEW_SCHEMA.PKG_UTILS.SERVICE_REMOVE API. An error occurred while preparing and executing the NEW_SCHEMA.PKG_UTILS.SERVICE_REMOVE API. Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'NEW_SCHEMA.PKG_UTILS' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6550" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception.

Can BI Publisher call stored procedures?

Can BI Publisher call stored procedures,no matter how?

Hi,Chris
"Stored PL/SQL procedures can be called from data Templates and Oracle Reports."Really?It is a great news for me.
Currently I am working on a poc.
There is a problem about calling Oracle stored procedures directly thru BI EE or BI Publisher.
Our customer has a lot of stored procedures in their previous system,they strongly hope our BI EE can call these sp directly.
All of these sp return the result set to the cursor,then the applications operate the cursor.
As there is no way can BI EE working with Oracle stored procedures or cursor,I am wondering whether can I call the sp from BI Publisher.
Can BI Publisher call sp or pl/sql?Can data template using pl/sql not only pure sql statements?
I have try write some pl/sql in data template,but it failed.It seems that the data template can only operate on some returned result sets.But sp won't.
If sp can be called thru data template,everything will be ok for me.For I can use pl/sql to opereate the returned cursor.

Need sample source code for calling stored procedure in Oracle

Hi.
I try to call stored procedure in oracle using JCA JDBC.
Anybody have sample source code for that ?
Regards, Arnold.

Thank you very much for a very quick reply. It worked, but I have an extended problem for which I would like to have a solution. Thank you very much in advance for your help. The problem is described below.
I have the Procedure defined as below in the SFCS1 package body
Procedure Company_Selection(O_Cursor IN OUT T_Cursor)
BEGIN
Open O_Cursor FOR
SELECT CompanyId, CompanyName
FROM Company
WHERE CompanyProvince IN ('AL','AK');
END Company_Selection;
In the Oracle Forms, I have a datablock based on the above stored procedure. When I execute the form and from the menu if I click on Execute Query the data block gets filled up with data (The datablock is configured to display 10 items as a tabular form).
At this point in time, I want to automate the process of displaying the data, hence I created a button and from there I want to call this stored procedure. So, in the button trigger I have the following statements
DECLARE
A SFCS1.T_Cursor;
BEGIN
SFCS1.Company_Selection(A);
go_Block ('Block36');
The cursor goes to the corresponding block, but does not display any data. Can you tell me how to get the data displayed. In the future versions, I'm planning to put variables in the WHERE clause.

Call stored procedure with OUT parameter

Hello,
I have created a short-lived process. Within this process I am using the "FOUNDATION > JDBC > Call Stored Procedure" operation to call an Oracle procedure. This procedure has 3 parameters, 2 IN and 1 OUT parameter.
The procedure is being executed correctly. Both IN parameters receive the correct values but I am unable to get the OUT parameter's value in my process.
Rewriting the procedure as a function gives me an ORA-01460 since one of the parameters contains XML (>32K) so this is not option...
Has someone been able to call a stored procedure with an OUT parameter?
Regards,
Nico

Object is Foundation, Execute Script
This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
import javax.naming.InitialContext;
import javax.sql.DataSource;
import java.sql.*;
PreparedStatement stmt = null;
Connection conn = null;
ResultSet rs = null;
try {
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
conn = ds.getConnection();
stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
rs = stmt.executeQuery();
rs.next();
patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
} finally {
try {
rs.close();
} catch (Exception rse) {}
try {
stmt.close();
} catch (Exception sse) {}
try {
conn.close();
} catch (Exception cse) {}

Creation of DB Adaptert for calling stored procedure in MS SQL server

Hi,
I need to create a DB adapter to call a stored procedure in MS SQL Server.
I have gone thru the thread MS SQL Server database connection
It mentions that we need to use a command line utility for generating the wsdl and xsd for calling stored procedures in MS SQL server. Please provide information where to find this utility and how to use it.
Any links to tutorials are welcome.
Thanks !!.
Silas.

Command line is required for stored procedures, if you are using the basic options you don't need to worry.
(1) Download MS SQL Server 2005 JDBC Driver from Microsoft Site. http://msdn.microsoft.com/en-us/data/aa937724.aspx
(2) The download is self extracting exe file. Extract this into Program Files on your machine. It should create folder as "Microsoft SQL Server 2005 JDBC Driver"
(3) In above mentioned folder search for sqljdbc.jar copy this file into JDeveloper\JDBC\lib folder.
(4) Open JDeveloper/jdev/bin/jdev.conf file add following entry.
AddJavaLibPath C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib
While executing this step make sure that your JDeveloper is closed.
(5) On command prompt go to J Developer folder and execute following command
jdev -verbose
This will open JDeveloper.
(6) Now go to JDeveloper > Connections > Database Connections > New Database Connection
(7) Select Third Party JDBC
(8) Specify MS Sql Server User Name, password and Role.
(9) In connection page specify following
- Driver Class: com.microsoft.sqlserver.jdbc.SQLServerDriver
- For class path browse to C:/Program files/Microsoft SQL Server 2000 Driver for JDBC/lib folder, select sqljdbc.jar add it as library.
- Specify URL as following.
jdbc:sqlserver://SERVERNAME:1433;databaseName=MSSQLDBNAME;
(10) Go to Test page and test it.
cheers
James

Can JDBC adapter be scheduled to call stored procedures

Similar Messages

Maybe you are looking for