Can LabView simulate multiple nodes on a single CAN bus?

We currently are developing a system where a single control panel controls a number of drive motors over a CAN bus. Each of those drive motors has electronics and software in them which tracks the status of the motor, and this information is sent over the CAN bus to the control panel.
We have previously used Vector CANoe to simulate the activity of the drive motor nodes on the CAN bus during development of the control panel. We want to move to LabView in order to run this kind of simulation.
Is it possible for LabView to be used to run this kind of simulation? Each node would have its own CAN ID on the bus. It would need to send out appropriate periodic status messages on that CAN bus that would be based on user inputs. It would also need to display certain information based on commands sent to it via the control panel over CAN.
Thanks for the assistance.

Hi,
I believe that what you need is to simulate several CAN ports. There is a similar discussion form that I believe will answer you question. I hope this helps.
Regards
Krista S.
Applications Engineering
National Instruments

Similar Messages

Can there be multiple ASM instances on single node?

Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM

...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob

Can I add multiple elements on a single line?

Can I add multiple elements on a single line?

Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Randy

Can you have multiple libraries on a single iPod?

Can you have multiple libraries on a single iPod?

Yes. This explains how >
Using iPad or iPod with Multiple Computers: http://support.apple.com/kb/HT1202
Note: You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.

How can i scan multiple pages in a single file in pdf.

How can i scan multiple pages in a single file in pdf using 1536 dnf.

Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can we save multiple IDocs as a single Flat file in R/3 system ?

Hi,
How can we save Multiple Idocs as a single Flat IDoc in R/3 (Not xmlized)
Kulwinder

Hi,
Check this link for Mutiple IDOCs into single File.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Regards,
phani
Reward points if Helpful:)

Can we combine multiple data sources in single report?

<span style="font-size: 10pt; font-family: Verdana">Can we combine multiple data sources in single report?</span>

If you can't do this at the Metalayer (BVs or Universe) - then subreports and shared variables are the method for CR to use multiple datasources in the same report.

Can LabVIEW process images in RAW format? Can LabVIEW handle images in the multimegapixel formats produced by some of the current DSLR cameras (e.g. 5000x3500 pixels)?

Can LabVIEW process images in RAW format? Can LabVIEW handle images in the multimegapixel formats produced by some of the current DSLR cameras (e.g. 5000x3500 pixels)?
Can LabVIEW be programmed to remotely acquire images from a commercial DSLR camera with DirectShow capability? e.g. Canon Rebel T2i.

1) So RAW files have a multitude of possible file extensions / formats, and it depends on which of these extensions you use. If the image can fit in memory, it can be brought into LabVIEW. An image of that size should be able to come into LabVIEW. Are you considering using NI-Vision to do this? You would look into the VI called "IMAQ ReadFile." There are a certain set of standard formats that can be read.
2) If a camera is DirectShow capable, and there are USB drivers available to access that camera through a Windows machine, then you should be able to bring that camera up in NI's software such as LabVIEW.
Ravi A.
National Instruments | Applications Engineer

Can I have multiple images on a single USB drive?

I would like to save an image from my T400 (XP), then upgrade the hard drive to an SSD, then upgrade the OS to Windows 7 (or 8), and take another image.
I have several questions that I hope someone can help me with...
Can I use Rescue and Recovery to save multiple images to a single USB drive?
If so, how does the sw keep the files separate?
Will it still work if I use two different Rescue and Recovery versions (4.3 for XP, and 4.5 for W7)?
Is there a way to store the images in separate folders on the USB drive, or is that unnecessary?
Is there a better way to do this (including using different sw)?
Thanks in advance,
Ron
Solved!
Go to Solution.

If you open Disk Management, you'll see Disk 0 with more than one partition. If you want to rebuild a HD back the same you'll want all or at least two of the partitions. You'll notice the Active Boot partition is not C the Windows drive but a partition called System_Drv (at least in my system). Those two will be mandatory when you image a new drive. Otherwide you'll have some fixing with external tools to get it booting.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Can I get multiple sums in a single column based on a "code" I place.

After importing a file of check/debit card activity from my bank, can I 'code' the line items based on tax categories ie Utilities, Medical expenses, Auto expenses, etc. and then get sums for each based on that code I placed in a single column? That would mean multiple sums in a single column based on the code used for each tax related expense. For instance, I would put UT in the column for utilities expenses and MED in the same column if it were a medical expense. I would then want the sum for all items in that column for each item code. Is this possible or do I need to use a different approach to get this information.

My guess is that the SUMIF function may be your friend.
It's well described in the *iWork Formulas and Functions User Guid*e which every user may download from the Help menu.
Yvan KOENIG (VALLAURIS, France) samedi 2 janvier 2010 21:56:39

How can I print multiple pictures on a single sheet?

Today 3/27/2012 I tried downloading HP software that says it has a new feature that allows printing multiple pictures on a single sheet of photopaper. The download started and halted at only one square and sat there flashing for hours, meaning it wasn't downloading on my Pavilion desktop computer. Since it's a new feature (apparently), no wonder no one as yet has asked this question and so I doubt if anyone has the answer. But, I'll wait to see.

You are probably going to get help by posting in the iPhoto forum. You can easily locate it by clicking on Apple Support Discussions on the top left of this page then navigating to the iPhoto forums.
Roger

Can we draw multiple lines on a single CAShapeLayer?

I want to draw multiple lines on a single layer of CAShapeLayer by UITouch. Is it possible?

if they use the same appleID then you can do it at www.icloud.com

How can i add multiple validations for a single input box in adf?

hi,
i want to add multiple validation for a single input text control in adf like number validation and its existence in database.
MY JDEV VERSION IS 11.1.1.5.0
pls help !!!!

Hi,
1.I want to validate if the value entered is pure integer
Option 1-
select the component and in the Property Inspector, in the "Core" category select a "Converter" format, select javax.faces.Number, if the user put a string, adf show a dialog error or message error...
Option 2-
or use the Regular expression:-
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
https://blogs.oracle.com/shay/entry/regular_expression_validation
Also check this:-
http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_validate.htm#BABHAHEI
Option 3-
Frank in his great book 'Oracle Fusion Developer Guide' shows a example using a javascript for input which is allowed only for numbers. You can manipulate for your requirement.
Here is the code:
function filterForNumbers(evt) {
    //get ADF Faces event source, InputText.js
    var inputField = evt.getSource();
    var oldValue = inputField.getValue();
    var ignoredControlKeys = new Array(AdfKeyStroke.BACKSPACE_KEY, AdfKeyStroke.TAB_KEY, AdfKeyStroke.ARROWLEFT_KEY, AdfKeyStroke.ARROWRIGHT_KEY, AdfKeyStroke.ESC_KEY, AdfKeyStroke.ENTER_KEY, AdfKeyStroke.DELETE_KEY);
    //define the key range to exclude from field input
    var minNumberKeyCode = 48;
    var maxNumberKeyCode = 57;
    var minNumberPadKeyCode = 96;
    var maxNumberPadKeyCode = 105;
    //key pressed by the user
    var keyCodePressed = evt.getKeyCode();
    //if it is a control key, don't suppress it
    var ignoreKey = false;
    for (keyPos in ignoredControlKeys) {
        if (keyCodePressed == ignoredControlKeys[keyPos]) {
            ignoreKey = true;
            break;
    //return if key should be ignored
    if (ignoreKey == true) {
        return true;
    //filter keyboard input
    if (keyCodePressed < minNumberKeyCode || keyCodePressed > maxNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        //no need for the event to propagate to the server, so cancel
        //it
        evt.cancel();
        return true;
    if (keyCodePressed > maxNumberKeyCode && keyCodePressed < minNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        evt.cancel();
        return true;
2.I want to check if the value exists in my respective DB You must be having EO or VO if you want to validate with database in that case use the solution suggested by Timo.
Thanks
--NavinK

Updating multiple node in a single query

Hi
Shall I update multiple nodes (which satisfies the given condition) in a single query? From the prototype we suspect that all nodes in all document are not updated in the container.
Version: BDB XML 2.4 - Fedora core 4 Linux - C++ language
Query:
replace value of node collection()/File[@Id="57565C01327A"]//Entry[@Class="Measurement" and @Id="0"]/Attribute[@Name="apDlBhUtil"]/@Value with 8'
Result:
XmlException occurred with msg 'Error: Sequence does not match type node() - the sequence contains more than one item [err:XUTY0008], <query>:1:1'
We have tried running the query in both Lazy and Eager evaluation type. Please clarify that the issue is with the query/execution type or BDB XML doesn't support this feature?
Thanks
Santhosh

Santhosh,
Try:
for $i in collection()/File[@Id="57565C01327A"]//Entry[@Class="Measurement" and @Id="0"]/Attribute[@Name="apDlBhUtil"]/@Value return replace value of node $i with 8'The problem with your original is that the argument for "replace value of" needs to be a single item, not a sequence.
Regards,
George

How can I connect multiple clients to a single client ?

I am currently developing an instant messaging program.I created a server and connected multiple clients to it by using thread logic.However I do not know how to connect multiple client to a single client.
What shall I do for that?Does anybody know a good tutorial or sample program?Or shall anybody explain me what I shall do for building the Instant Messaging part of my chat program?
Thank u in advance.

You may use UDP multicast socket. But since you are using the UDP protocol you might risk losing the data that you send since UDP does not guarantee the safe transfer of data.
Alternately, you might create a server that allows multiple client to connect to it whose connection Socket objects are then stored in a Vector <Socket> object. The server then sends back data to the connected client about the other clients connected to it. Now when the client wants to send data (like an IM) to another connected client, it has to send a request to the server specifying the client login name and the server in turn streams that particular client's Address and Port to the requesting client. The requesting client then initiates the connection with the other client and then starts a conversation. One more thing, when the client communicates it needs to send information to the server like the name by which it likes to be referenced. In this scenario the server acts like a central repository for clients to query the existence of other clients in the chat room. Each client here runs a thread that listens to incoming connections and when a connection is established, may be opens a IM window or something.
The third option is to make the server to relay the information from one client to another. Like say, I'm connected to whoopy server and i want to send "Hello" to jackson, then i send the message (ie, Hello) along with the name of the client to which i wish to send it to (ie, jackson). The server then performs a lookup in its Vector <Socket> object and then initiates a connection with jackson and sends the information. However, this method is pretty costly in that you will be wasting a lot of processing behind the server.
--Subhankar
P.s. If you stumble upon any other brilliant ideas let me know.

Can LabView simulate multiple nodes on a single CAN bus?

Similar Messages

Maybe you are looking for