Can not bind server stubs.

Hi All,
i am strugling for a few days (!) now with a starnge problem
i have created an rmi application and when i run under windows all is well.
when i tried running it under Linux (Red Hat 7.2) and the stubs where not packed in a jar file all is well as
well. BUT - if i pack the stubs in a jar i get an exception :
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: (<name of class>...)
The Exception occour when i try to BIND the stub not when the client is looking for it.
i have set the policy , classpath , and security manager properly obviously since the appliaction is working
ok when the stubs are not packed in a jar. the jar file is at the same directory as the unpacked stubs when
the application is runnig so i dont think it is a classpath issue.
Can anyone please help ? thanx.

I don't, sorry. I suppose windows is making a informed guess about the path to the classes. I'm only using linux and Java 1.5 and I have to make sure and expose the interfaces I bind to the rmi registry. Not sure which behavior is supposed to be the correct one.

Similar Messages

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

When I try to use Safari I get an error message that states it can not find server Xn--%20%20-1ia0eb092a

When I try to use safari I get a message that states can not find server Xn--%20%20-1ia0eb092a

It sounds like you've got a messed-up homepage. Click the Safari menu, click Preferences, and under "Home page", re-type the page you'd prefer to load when Safari starts (eg "nytimes.com" or whatever). Close preferences and try again.
Matt

Certificate error connecting to VPN, can not validate server

Used the configuration utility to configure a profile for VPN using certificate as authentication. Keep getting error, can not validate server. When I export the cert to my desktop, I see the CRL information in it. When I view the details of the cert after installing on the iPad, I don't see any CRL information. I'm guessing this may be the problem only not sure how to resolve it.

solved the problem by adding an additional attribute in the certificate request to the VPN server (cisco router) and first enable the server SubjectAltName CA
In CA server:
certutil -setreg policy\EditFlags +EDITF_ATTRIBUTESUBJECTALTNAME2
certutil -setreg policy\SubjectAltName enabled
certutil -setreg policy\SubjectAltName2 enabled
net stop certsvc
net start certsvc
In certificate request for VPN server:
In the Attributes box, type the desired SAN attributes. SAN attributes take the following form:
san:dns=dns.name[&dns=dns.name]/san:ipaddress=x.x.x.x
(external dns/ip)
http://support.microsoft.com/kb/931351

Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank you

The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck.

Can not access server's on public ip's

Guys,
We have a core switch with two fibre lines connecting us through two different ISP's to the internet. These ISP's have provided us with a range of public ip's each. We have a few routers on some of these ip's and they are working fine and we can access them externally (telnet and ssh).
I am now busy setting up two servers, one on each ISP with their respective public ip's. I can ping the core switch and the isp gateways from the servers and from the core. I have triple checked that there are no active firewalls and I can see that the http ports are open and accessible (TcpView). But for the life of me I can not access those servers externally. I am now completely stumped. I do suspect though that it is a routing problem through the core.
And herewith the relevant parts from my Core switch's config:
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
hostname SMS-CORE
no aaa new-model
clock timezone ZAR 2
no ip source-route
mls netflow interface
mls cef error action reset
spanning-tree mode pvst
spanning-tree portfast edge default
vlan internal allocation policy ascending
interface FastEthernet3/25
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/31
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/35
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/37
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/47
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/48
ip address 192.168.2.2 255.255.255.252
interface Vlan1
no ip address
interface Vlan20
ip address PUBLIC_IP1 255.255.255.240
interface Vlan153
ip address PUBLIC_IP2 255.255.255.248
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip local policy route-map PUBLIC
access-list 100 permit ip ISP2_NETWORK 0.0.0.7 any
access-list 101 permit ip ISP1_NETWORK 0.0.0.15 any
route-map PUBLIC permit 10
match ip address 100
set ip default next-hop PUBLIC_GW2
route-map PUBLIC permit 20
match ip address 101
set ip default next-hop 192.168.2.1
Any ideas guys, I am at my wits end here ....
Thanks as always !

Hi Oliver ,
Have you got IP Address assigned to your server from the same segment ?? like for server 1
ip address PUBLIC_IP1 255.255.255.240
and for server 2
ip address PUBLIC_IP2 255.255.255.248
What is the gateway IP address assigned for both servers .
HTH
Sandy

Can not find server

hi,
i have installed coldfusion 6.1 standard version on my
machine with built in server. it works fine on my machine having
port 8500. when i execute
http://xxx.xxx.0.20:8500 on my
machine it display me coldfusion root directory. here xxx.xxx.0.20
is my machine ip address. but when same i execute from other
machine it gives me error "Could not fine server".
can anybody help me out to solve this issue.

hi,
i have problem with coldfusion server , i just have answer to
tell you that my machine doen't have problem with access from other
pc. i have told you that if any one access my pc using apache
server it works fine. and apache is running on port 81.
now problem is that my coldfusion is not working on other pc
same as apache. coldfusion i have installed using built in server
so for coldfusion i am not using any other server. i have used
apache for my other purpose. there is no consern of apache with
coldfusion.
i am telling that if any one execute any page from my pc
using apache say "http"//111.112.0.21:81/temp/t.php" it works fine.
but suppose any one execute coldfusion say "
http://111.112.0.21:8500/temp/t.htm"
it says that cannot find server.

Can not delete server from pool

Ok.....I think I'm on a sinking ship.....
I want to start from scratch.....deleting the SAN servers, server pool, everything and start over.....
however, I can not remove any servers from the pool because the manager thinks their in an error state. I rebooted on of the servers and it came up just fine. The manager is just messed up!
So how can I remove the server in an error state?
Is there a way to bring the manager back to where I started discovering the servers? Please don't say re-install or I will have to start looking for a rope.

I have barley got the system off the ground and am now facing a "re-install". With the problems that I am having and others I see on this forum....makes it look like this is still a beta product.
A system in production should not have to be "re-installed" to solve a problem....or that someone needs to do something at the OS level to do a fix. The manager should have the ability to "go back to factory defaults", do backups and restores of its data (not relying on backups/restores of the Oracle database).
I have a great 'rock sturdy" reliable system right now.....but is dated and I need to upgrade hardware. I need something as reliable to replace it.....
I guess I am just frusterated that their are some major bugs down deep that need to be addressed.

I downloaded FireFox, but can not Run, "Server not found " displayed

I downloaded Firefox in Safe Mode (can not download in normal mode, it blocked by IE), when I run it , it displays, "Firefox can not find the server at www.mozilla.com"
I wanted temporarily tun off the firewall to let Firefox in. I
contacted my Anti-virus company Tech support, they did not give me an answer. Any solution?
Greatly appreciate your help!
C.Y.

Thanks for the reply.
We are still not able to figure out the reason, but the problem seems to orignate in the way swing handles repaint() events in JDK version 1.3. (Paint coalescing, see link below...)
http://java.sun.com/j2se/1.3/docs/guide/awt/enhancements.html#coalescing
Our application has multiple swing controls. Each control requests data from the model in its paint event. If model does not have the data it in turn opens a http socket connection to the server and gets the data.
Our guess is that the calls which were previously sequential, are going simultaneously after coalescing was introduced in swing. But it does not explain why it works if client is not on server machine.
Also, the application does not fail in a consistent manner. In most cases data does not come at all, but sometimes some controls do get the data. (If server and client are running on different machines, controls always get the data.)
We have ruled out the possibility that the weblogic server is modifying the classpath or any environment variable at startup and resetting them at shutdown.
We started server on two machines, machine1 and machine2 and opened a client in machine1 which accessed server running on machine2. Everything ran perfectly.
Any help will be appreciated. We are all ready to handover to QA except for this inexplicible bug :(
milinddev, can i send you a mail..... ? The posting has your email-address.
Thanks again

SendRedirect - can not find server

Hi,
I have a jsp page with a form.
This form's action is another jsp.
This jsp checks some values in the request
and redirects the call to a servlet.
I am using response.sendRedirect.
The application works well if the webserver is running in port 80.
IF i try to run the applicaiton in some other port other than 80,
i am geting "Page can not be displayed" error.
Any idea of what the problem might be?
Thanks for the help!!!

hi,
thanks for the reply.
I did that too.
Still same problem.
This is what i am doing in the jsp
     int port = request.getServerPort();
     StringBuffer url = new StringBuffer(request.getScheme());
     url.append("://").append(request.getServerName());
     if (port != 80) {
          url.append(":").append(port);
     url.append(request.getContextPath()).append("/");
url.append("my servlet path");

Can not access Server admin site

I can not access http://MYSERVER1:50000 site. I get error "The page cannot be displayed. The page you are looking for is currently unavailable.".
But I was able to access even yesterday. Could you tell me any possible problems and how to fix the error?
Thanks!
Mike

Hi Mike
That means your J2EE engine is not running...
Restart the engine, also check that the DB is up and running.
Regards
Juan

Why I can not log in or connect my account on Apple idea?been trying many times..it says I can not connect server.seems something wrong or am I being hacked?

Seems i can not log in to my Apple ID account...been trying it for a lot of times.it says when I log in " I am pretending to be...etc and that my account might be at risk? Is my account being hacked for this matter? Need help.thanks!

I have now been able to log into my accounts for IMessage and to ITunes store; however, they are still unresponsive. My messages do not go through and the Store is still laggy as well. I will keep updating this discussion as I am constantly checking so I can use the Cloud and IMessage again.

Can't bind server to OD, replication broken, users at some sites can't auth

Hi all,
Having a doozy of a problem with our OD at the moment, hopefully someone can help
The setup:
1 OD master and 3 replicas at head office here, all running 10.5.5 (issue also occurred in 10.5.4)
Around a dozen remote AFP & SMB file servers, all are setup as "Connected to a directory system"
Most sites are OK, but we have issues at 2 sites.
Setting each site to "Connected to a directory system" fails at the Directory Utility stage. We try and add the master (or even some of the replicas), put in the diradmin name and password, and attempt to bind, but it responds with an error after a while.
The error states that there is already a computer with this name, and prompts to overwrite. Overwriting fails also.
I did a search and found this:
http://support.apple.com/kb/TS1245
and this:
http://forums.bombich.com/viewtopic.php?t=11834&highlight=lkdc
But neither tips help
Attempting to set up the 2 remote servers as replicas stops at the "Enabling Password Server Replication" stage. I can close out of the assistant at this stage and am left with a "broken" replica, which has 2 out of 3 things running:
LDAP Server: Running
Password Server: Stopped
Kerberos: Running
On the master it says "Password Service Not Found"
So it seems that setting up replicas on a different subnet doesn't work.
I've tried getting my ISP to set up a static route for the VPN tunnel, and this worked for a set of blank test servers with no extra users added to them.
Interestingly, setting a user's password to "Crypt" in WGM allows them to authenticate to the "broken replica" and access their files. Setting their password type to "Open Directory" has no luck at all.
If I jump on the server and try a password check in the terminal, I get:
AFP:
dirt -u username -p password
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Call to checkpw(): Bad Password
path: /LDAPv3/10.10.20.1
Username: username
Password: password
Error : eDSAuthFailed : (-14090)
SMB:
dirt -a nt -u username -p password
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
path: /LDAPv3/10.10.20.1
Username: username
Password: password
Good
The master's IP is 10.10.20.1.
Users can sometimes connect via SMB instead of AFP, which is a workaround for now, but I'd like to know why this is happening.
I've tried setting the AFP server's authentication methods to Standard instead of Any or Kerberos, to no effect.
Does anyone know why these servers won't bind and won't replicate, and only allow connections if people use Crypt passwords? Is my Kerberos stuffed?

Well, I tried to demote, then promote my master with no luck. During the upgrade from Tiger to Leopard, the password service cache (or whatever it's called) was somewhat corrupted. My OD Archive failed to restore !! I had to rebuild my entire OD from scratch.
Now I have slightly less errors. My replicas joined up fine. Kerberos passwords get propagated when a password changes, but samba passwords do not. Samba working is essential as 95% of the clients machines are windows boxes. Here are a few quick tests I did:
replica1 root# dirt -m /LDAPv3/127.0.0.1 -u fred
User password:
2009-01-15 17:13:16.919 dirt[4224:10b] password is : <password>
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Username: fred
Password: <password>
Success
replica1 root# dirt -m /LDAPv3/127.0.0.1 -a nt -u fred
User password:
2009-01-15 17:13:23.160 dirt[4233:10b] password is : <password>
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Username: fred
Password: <password>
Error : eDSAuthFailed : (-14090)
On the master this all works fine.
The funny thing is that my diradmin account has not problem on the replica.

Can not promote server from Standalone to PDC

Hi,
I am currently trying to promote my SMB service from a Stand Alone server to a Primary Domain Controller (PDC). It get to an Authentication window asking for my Directory Admin name and password. Which I enter correctly. I click okay, and the setting for PDC changes back to Standalone Server.
I have verified that my DNS settings are correct, and that the DIRADMIN password is correct as I can athenticate to it in Workgroup manager.
Any suggestions?
Thanks

I remember having a problem like this, I think my issue was solved by using the username 'Administrator' not 'diradmin'. If I recall correctly the username and password it was looking for was for the Windows domain, not the OD.
I could be totally off my rocker on that one, so my apologies in advance if it does not work...

Can not bind server stubs.

Similar Messages

Maybe you are looking for