Can not change the number of decimal places in the normalization of result

dear all
    i want to see the proportion of some data, for example, the income of May is 300, and the total income is 1000, i need to display it like 33.33% . so i set the
Calculate single values as normalization of result, and then it display 33.333%, i like to display only two number of decimal places, so i set the number of decimal places as 0.00, but i doesn't work, it still display three decimal numbers.
    maybe you say i can use the percentage function like %CT %GT %RT, but i need to allow external access to my query, so the i can not use those functions.
    can somebody helps me ? your advice is appreciated.

hi,thanks for your advice, but that doesn't suit for my problem.
before i set the normalization of result, i can change the decimal values. After that i cann't.
In your thread, someone proposes use the T-code OY04. but this wouldn't help. As i change to other key figure, such as user quantity, when i set normalization of result, it still display 3 decimal values.
i think the point maybe lie in the normalization of result. please advise... thanks...

Similar Messages

  • How to set the number of decimal places.

    Just wondering what and where the code would be to set the number of decimal places when calculating an answer.

    Depending on exactly what result you want you could alternatively format the result to a set number of decimal places.
    This is not so good for financial applications where they want the total of 10 transactions to match the total of each number displayed but can be kind of important for scientific ones.
    eg
    someNumber.ToString("N3"));
    Gives you three decimal places without changing the someNumber.
    If this turned out to be wpf then you have stringformat you can use on a binding.
    Hope that helps.
    Recent Technet articles:
    Property List Editing ;  
    Dynamic XAML

  • How to get the number of decimal places configured for a site column

    Hi,
    I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
    The column conatins a value, but when retrieved programatically is displayed as 5.00000000  instead of 5.00.
    I am retrieving this column using listitem.Properties[field.InternalName].
    I need to trim the decimals based on  number of decimal places configured for the site column.
    How to get the number of decimal places configured for a site column?
    Thanks in advance,
    dhijit

    Get the field as SPFieldNumber and then check DisplayFormat which returns
    SPNumberFormatTypes
    SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
    SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

  • Yielding the desired number of decimal places using the AVG function in t-sql

    Hello again.  Confused retired hobby coder having trouble setting up a scalar-valued function to return the desired number of decimal places from a AVG query.
    Whenever I run the following script I get the number of decimals I desire:
    Using the above I created a scalar-valued function as follows:
    Running this function as: SELECT [dbo].[TestHCIPartial] (1,3)  my return is -7.
    Can you help me with the function causing it to yield the answer to 6 decimal places?
    Thanks and regards, Minuend.

    You've not specified precision and scale in UDF return type. So you're leaving it to server to interpret it based on default settings
    If you want exactly up to four decimal places tweak udf as below
    ALTER FUNCTION..
    RETURNS decimal(20,4)
    AS
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • HT5538 i can not change my number in FaceTime

    i can't change my number in FaceTime

    Hi dhristov,
    Welcome to the Support Communities!
    The article below will explain how to change the phone number associated with your Apple ID:
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    iPhone automatically registers your phone number for use with FaceTime and iMessage.
    To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Can not connect to WLAN on every place where the WLAN is available

    Sometimes my computer will connect and detect wireless networks, airports hotels etc but will not work at home and in some ofices.
    I run WXP updated with SP2 have an Artheros5005gs adapter. Any ideas?

    Hi
    This is a question of compatibility between the WLan router and the WLan card.
    If the WLan card does not support the same Wlan standards then you will be not able to establish the wlan connection.
    Mostly the Hot spots (Wlan on airports, city, etc) are not secured and therefore the notebook connects automatically to such Wlans.
    The Wlan at home or in the office is mostly secured and you need an right encryption key to connect to such Wlans.
    So I think you should check you WLan router configuration settings and use the right encryption key, SSID, etc

  • Middleware: Can not change current Number schema for R3PRODHIER hierarchy

    Hi
    Gurus, I have the follow problem regards to number schema for R3PRODHIER.
    All products in CRM came from R3 and they were create under the standard "Material: Product hierarchy", that is  tree levels. Aferward, I had to changed it for using six level (R3 as well as CRM), but when I try to upload them to CRM by Middleware, system issue message error: "Category ID XXXXXXXX (level 3) is not in accordan ce with numbering schema".
    I guest the issue is because there are Products in CRM created under the old hierarchy, please could tell me how to update them  without delete old products into CRM????
    PD: If fact, CRM does not let me change the current  Number Schema for R3PRODHIER (3 levels), and there up to 16.000 products loaded in CRM with such levels.
    Thanks to everybody

    Hello,
    I am facing the same issue wherein my system has 6 levels in the Product Hierarchy instead of usual 3 levels. And when I am trying to do an initial download for the object DNL_CUST_PROD1, I get the similar message "Category ID 00001 is not suitable for the numbering scheme".
    Can you please help.
    Rgds
    Priyanka

  • Bex: overall Result: number of decimal places

    Good day
    How to I change the number of decimal places for the "Overall result" in a query?
    Your assistance is appreciated.
    Cj Faurie

    Thanks for your response.
    The number format in properties for the KF (formula created in query) has been set to '0' decimal places. I also use the "Average of all values <>0" in the calculate results for the KF. If you use "Summation" then the decimal will apply, but not with the "Average .....".
    My "0CALMONTH" is in rows and results is based on this (set to 'never') as I want the Overall Result to display first as my chart is based on the OResult and not the individual figures.
    "This is the layout of my report"
    Territory     Overall Result    2007/02     2007/03    2007/03
    Boland       205.8333           21             242          355
    The "overall result' should display as '206'. Why does the 'decimal place' not apply to "Average of all v...."?
    Thanks
    Cj

  • Formatting decimal places in the X Axis

    I’m having trouble limiting the number of decimal places in my X Axis on a 2 Axis plot.
    I am running a script file (SUD) that sets all the other parameters in the Plot. The “Report “ file is called up and then the script controls the functions.
    This is only a small section of the code. I haven’t found a command to set the Decimal place in the “help” page.
     ie: Call GraphObjOpen("2DAxis1_XAxis1")
        D2AxisXFormat    = " "
        D2AxisXAng       = 0
        D2AxisXRelPos    = "bottom"
        D2AxisXFont      = ""
        D2AxisXSize      = 2
        D2AxisXColor     = "blue"
        D2AxisXColorRGB  = 50266112
        D2AxisXAutoColor = 0
        D2AxisXBold      = 0
        D2AxisXItal      = 0
        D2AxisXUndl      = 0
        D2AxisXStrOut    = 0
        D2AxisXFrame     = 0
      Call GraphObjClose("2DAxis1_XAxis1")
    And:
    When I open the “Curve and Axis Definition” window of the graph on the report page ,and set the “Format:” function to display “d.dd” It seems the script is overwriting the format that I set.
    This is what I have now and would like to display only 2 decimal places in the X Axis. Can you help?
    Thanks!
    SJD
    Solved!
    Go to Solution.
    Attachments:
    X-Axis Decimal places.jpg ‏17 KB

    Thanks Brad for you quick response.
    It kind of worked... I think I might have something else going on. Not sure what though.
    With the changes made in the script you suggested, the X-Axis has changed to two digits but now it displays  " 1.dd "
    Any thoughts where else I might have gone wrong?
    Thanks again
    SJD
    Attachments:
    2013-03-13_151027.JPG ‏12 KB

  • BEx Analyzer displays wrong number of decimal places after implementing BW patch

    Hey folks,
    we patched our BW 7.31 from PL10 to PL15 last weekend and now we got some issue with the number of decimal places shown in BEx Analyzer 7.x.
    One example for KF X
    Settings Info Object X
    Decimal Places:                         Not defined
    RSRT - Display X
    Shows 3 decimal places
    Query Designer Settings using KF X
    Number of Descimal Places:     0  [Use Default Settings: NO]
    BEx Analyzer Properties for KF X
    Decimal Places:                         0
    Resulting in BEx Analyzer workbook shows 3 decimal places instead of 0!
    Anyone with an good idea about that?
    Thanks,
    Andreas

    Hi Andreas,
    Have you used the list calulation like "Calculate Result As Average" or "Calculate Single Values as normalization of result" in the relevant key figures?
    For "Calculate Single Values as normalization of result",iIt is the known design that it is always displayed with three decimal places for normalized values, and the setting in Query Designer for
    decimal place doesn't take effect.
    For "Calculate Result As Average", the following note maybe relevant.
    2096911 - Decimal places in query result is wrong, if average is used and display precision is set to less than 3, it will always show 3 decimal places.
    Another clue is to check if the key figure is a Quantity type with unit, and what's defined in table
    T006 field ANDEC for this unit.
    Hope this helpful.
    Regards,
    Ceciclia

  • Decimal places in the BCC field

    Hello,
    I created a field in the xml to save a field of type double, but only allows up to three decimal places.
    <property name="freight" data-type="double" column-name="freight" display-name-resource="freight" category-resource="categoryBasics" >
         <attribute name="propertySortPriority" value="50" />
    </property>
    with sql for the column freight
    freight
    number(28, 20)
    NULL
    I noticed that this also occurs in other fields in BCC,
    Is it possible to increase the number of decimal places for a property?
    thanks.

    Hi,
    I created the view mapping as your orientations and looked like this
    <add-item item-descriptor="itemMapping" id="AmImTest">
      <set-property name="itemName"><![CDATA[test]]></set-property>
      <set-property name="description"><![CDATA[AssetManager Test itemMapping]]></set-property>
      <set-property name="mode"><![CDATA[AmMmDef]]></set-property>
      <set-property name="viewMappings"><![CDATA[ivM1]]></set-property>
      <set-property name="formHandler"><![CDATA[AmFhDef]]></set-property>
      <set-property name="itemPath"><![CDATA[/atg/multisite/SiteRepository]]></set-property>
      <set-property name="name"><![CDATA[AssetManager]]></set-property>
    </add-item>
    <add-item item-descriptor="itemViewMapping" id="ivM1">
      <set-property name="propertyMappings"><![CDATA[propertyViewMapping=pvM1]]></set-property>
      <set-property name="attributeValues"><![CDATA[includedProperties=av1]]></set-property>
      <set-property name="displayName"><![[scopus.geralProperties]]></set-property>
      <set-property name="name"><![CDATA[ item View Mappi]]></set-property>
    </add-item>
    <add-item item-descriptor="attributeValue" id="av1">
      <set-property name="value"><![CDATA[id,name,description,freight]]></set-property>
    </add-item>
    <add-item item-descriptor="propertyViewMapping" id="pvM1">
      <set-property name="propertyView"><![CDATA[pv1]]></set-property>
    </add-item>
    <add-item item-descriptor="propertyView" id="pv1">
      <set-property name="description"><![CDATA[BIZUI Basic editor for double properties with more than 3 decimal characters.]]></set-property>
      <set-property name="attributes"><![CDATA[inputFieldMaxlength=pvAtrDef1]]></set-property>
      <set-property name="mode"><![CDATA[aMgrMmView]]></set-property>
      <set-property name="isComponentPropertyView"><![CDATA[false]]></set-property>
      <set-property name="isReadOnly"><![CDATA[false]]></set-property>
      <set-property name="type"><![CDATA[double]]></set-property>
      <set-property name="name"><![CDATA[SCO BIZUI with more than 3 decimal characters.]]></set-property>
    </add-item>
    Did I missed something?

  • Altering number of decimal places of formatted number

    Using http://java.sun.com/docs/books/tutorial/i18n/format/numberFormat.html I have worked out how to format a number, almost. When I follow the example in this tutorial that shows how format a double, it always rounds it to 3 decimal places. How do I alter the number of decimal places that this formatting procedure outputs? I used the US as the locale and English as the language. I am assuming that if these parameters are chosen, 3 decimal places is the output. Is this assumption correct?

    Look at the next chapter :)
    http://java.sun.com/docs/books/tutorial/i18n/format/decimalFormat.html

  • Nokia prime place in the service can not change th...

    nokia prime place in the service can not change the company's address. How can this be possible???? I received a reply from Nokia that I need to first go to here.com, look for my company and my company COMPLETELY removed. Then, to create a company AGAIN!? And wait 2-6 WEEKS backup postcards so I can verify the company that it appears Nokia's map service!! **bleep**??! Again, what's the point? Companies are changing in the same way as people exchange phone numbers!

    I manage to fix it
    by format my iPhone (General -> Erase All Content and Settings) and restore from backup.
    After the restore the name was updated to my real name.
    ! don't forgget to do a backup for all your apps data and your photos !

  • Credit card number change, your company can not charge , so , what can I do ?because I buy one year plan , but the plan stop already  ,I can not change the credit card details.So, I need to buy one more year or can continous the paln with changing the cre

    credit card number change, your company can not charge , so , what can I do ?because I buy one year plan ,
    but the plan stop already  ,I can not change the credit card details.
    So, I need to buy one more year or can continous the paln with changing the credit number?

    Hello pen pang,
    if your Photoshop is a part of Creative Cloud you can use "Manage your membership and payments|Creative Cloud" at
    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html >>>
    Payment & credit card >>> Help changing the credit card on your account >>> from there see what hints are listed.
    On the other hand I'm sure that you can use the recommended procedure with a "normal" PS too.
    If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
    If you need these explanations in another language, please use "Change" at the end/bottom of the website from above
    Good luck!
    Hans-Günter

  • How to add 2 decimal places if the number is whole number(Integer)

    Hi Gurus- I had a requirement to add the zeros for two decimal places even the number is an whole number.
    Example: I had a column which i gave the datatype as Number(8,2) .While Inserting from the flat file to the custom table column,i am rounding it to 2 decimal places.But if its the whole number i want that also to be rounded to 2 decimal places.
    1) 3456.89675 It's getting inserted as 3456.89
    2) 123 It's getting inserted as 123 (Instead i want this to be inserted as 123.00)
    3) 123.50000 It's getting inserted as 123.5 (Instead i want this to be inserted as 123.50)
    Can you please let me know how can i achieve it to insert any number(decimal or whole number) from the flat file as 2 decimal places in the custom table column.
    Thanks in advance.

    Please do not post duplicates -- To update the date for the first of the month

Maybe you are looking for

  • Itunes says there's an update but doesn't appear in app store

    Anybody else get this?  I have been getting this for a while with iTunes updates...  There will be updates available but they never appear in the App Store....

  • Xserve compatible KVM board like Raritan or alternatives?

    Hi, is there a KVM over IP card like the Raritan eRich G4 that can handle booting from a remote image etc. that works with xserve? The Raritan card is a PCI card but xserve only has PCIe slots, so this won't work. What other options exists as I need

  • Creat file to write to spread sheet

    Hi all, I'm trying to save my voltage and time data after DAQ. The data went out OK. They are built to be a 2D array and I transposed them.  I wish to write them in Excel and thus can process data in that. I used  "File Path Control", "Open/Creat/Rep

  • Inforecord and tick on the field InfoUpdate.

    Hi, clicking F1 on the field InfoUpdate shows:   "If no info record exists and "plant condition requirement" was specified in Customizing, an info record with plant is created. Otherwise, an info record without plant is created." Where could I set in

  • Multiprovider showing data from only one underlying object?

    Dear Bwers, I have a Multiprovider (MP) that is defined on an ODS object and an InfoCube. When i create a query on the MP, i can see values that are coming from only the ODS and not the InfoCube. I have identified the key characteristics from both th