Can not create in Project Express CI

I've created a new CI directly out of the Project_Express component, using all default values. Seems like this interface can not be used to create a record. If this is the case, what component can I use as a CI to create a project costing record? If not, how can I change my CI to make it create a record? Thanks in advanced.

Hello,
what is the error you got?
try to delete .dtc folder from your installation drive complately and import configuration from dtr and create project again. If you still face error , it might be permission issue.
Post the error such that we can analyze the issue.
Regards,
Koti Reddy

Similar Messages

Can not creat ui5 project in hana studio

hello everyone:
i installed UI5 toolkit in hana studio, but when i creat UI5 project, the error like picture shows below come out, is there anyone who knows how to fix this problem? thanks a lot.
here is my hana studio installation details

Hi yang,
have you update with this link?
SAP Development Tools for Eclipse - Kepler Software Repository

Imoive : can not open new projects and kept pop up "you have permission to write projects" . plz help~!

New mac mini OS X Lion
I have problem with Imoive. When I try to open new projects for imovie....
Imovie can not create new projects and message pops up "Please check there is enough space or you have permission to write new projects".
I have no clue and Disk has more than 300GB now.
Can anyone help me....?

I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
I was deleting files trying to make space on my hard drive
What were you deleting?
and noticed as I was deleting files more data was being added to the iPhoto Library.
Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
I would really like to keep these pictures.
Make a back up now.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

I have iPhoto 11 installed on my iMac. Has been working for last several months ok. I am trying to create photo books but it gets hung up after I select create book. Does not create the project. Used to work but won't create any projects

ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????

ILife 11 (iphoto 11) installed over a year ago with no issues. Have been creating Apple Books with no issues till now. iPhoto now will not create books, calenders or anything else. After I select "create" it does nothing. Used to work Ok. Program seems to stall and do nothing. I can still look at events and other picture files but it will now not create a "project" / "book" Anyone with a similar issue????

Mail V3.1 can not create a new Cablevision Optimum Online mail account

Apple Technical support asked me to report this on this forum.
I have OS X 10.5.1 with Mail 3.1. My ISP is Cablevision Optimum Online, which uses mail.optonline.net as their POP and SMTP servers.
Pre-existing mail accounts, created under 10.4.x (Tiger) work perfectly. I am unable to create a new mail account with this version of the mail program. Mail's Add Account dialog (wizard) hangs as soon as it tries to connect to the mail.optonline.com server. After a long time trying it just says it can not connect to the server. This happens if I choose the new (and default) "Automatically set up account" option or not. It happens on multiple Leopard systems. In other words, when the mail account setup wizard checks for connectivity to the mail.optonline.net POP server, it fails, even though the mail program has no problem interacting with that same server with accounts set up under a previous version.
We brought a MacBook to the Apple store, and the tech. at the genius bar could not get it to work. He said call the ISP. We did that, spent hours with the ISP tech who told me many people are complaining about this. I suspected it was a problem with the way Mail 3.1 was doing its initial connectivity check. Perhaps using an incompatible port (SSL setting perhaps).
After a good nights sleep, I figured out a work-around. I created a dummy GMail account, after it was created I modified it to have my Optonline account specifications, turned off SSL and it worked.
After I had circumvented this problem, someone else that had the same problem found a different resolution. We both also had .mac accounts defind. When they deleted their .Mac account from the mail program, they were able to create a new Optonline.net account. .Mac uses SSL.... interesting.
Thus, it seems that if you have a .Mac account with Mail 3.1 you can not create an Optonline.net account. A bug that I hope Apple fixes quickly.

iLounge had some good info on this topic. The KEY INFO in the post was that after you have gotten the account set up you need to turn off your WiFi router (if you have one) to reset it.
http://forums.ilounge.com/showthread.php?t=221752
Here are the details on how Optonline says you set up an account:
Name: type your name here
Address: [email protected]
Description: whatever you want to put here
Incoming Mail Server
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
Outgoing Mail Server (SMTP)
Host Name: mail.optonline.net
User Name: xxxxxxxxxx (don't add "@optonline.net" here, but put what goes before it)
Password: your password here
My other settings under the "Advanced" tab look like this...
Deleted Messages
Remove: Never
Incoming Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 110
Outgoing Settings:
Use SSL: OFF
Authentication: Password
Delete from Server: Never
Server Port: 587
===========
This person adds "Oh, one more thing... after you save your account settings, you may need to turn off WIFI, then "power off"... then "power on" turn WIFI back on and try to get mail again after it connects."
============
Based on the information I read here and on iLounge I was able to get Optonline email working.
1) Deleted my Dot Mac mail accounts in Apple Mail
2) Created an Optonline account based on the details above from Optonline in Apple Mail
3) Unplugged my Airport Extreme Base Station, waited 20 seconds, plugged it back in.
4) I was then able to receive mail but not send on the Optonline SMTP server
5) So...I then went back and checked the details on the Optonline account in Apple Mail. Not sure why but the SSL/authentication selections were changed. So I set them correctly based on the information above and saved. That worked and I was able to send email.
As you are having trouble with Apple Mail and Optonline (why else would you be reading this?) let me also mention that Optonline blocks Port 25 for outbound email so if you have non-Optimum Online email accounts and want to send email on that ISP's server you will not be able to do that unless (a) you pay Cablevision more for a business or boost account (b) use webmail (c) your ISP is willing to provide you with an alternative email port other than 25.
Here is the page from their site on this topic
ort 25 and Optimum Online
Answer
All e-mail sent via the Internet is routed through Port 25, the channel used for communication between an e-mail client and an e-mail server. Activation of Port 25 is currently available with Optimum Online® Boost or Optimum Online for Business. Please continue reading for more information, including activation instructions.
Port 25 Filtering/Blocking
To help control the amount of spam that originates from the Optimum Online network, Optimum Online filters outbound Port 25 e-mail (SMTP) traffic for all standard Optimum Online customers. This filtering is a common spam control measure used by Internet Service Providers. It not only prevents spam sent intentionally, but also thwarts computer viruses that let spammers connect to an unsuspecting customer's infected computer and send spam.
This filtering is transparent to the vast majority of our users. However, if you access a non-Optimum Online e-mail service with an e-mail client application (like Outlook Express), or run your own mail server, you may not be able to send and/or receive e-mail.
Port 25 Availability
If you require Port 25 to be active, Optimum Online offers these options:
Subscribe to Optimum Online Boost. Click here for more information.
Businesses can subscribe to Optimum Online for Business or Optimum Online Boost for Business.
Activating Port 25
If you subscribe to Optimum Online Boost, and would like to utilize Port 25, you'll need to activate it. Simply follow these steps:
Log into optimum.net using your Optimum ID and Password.
Click on Optimum Services.
Click Manage from within the Advanced Config section.
Set Port 25 to On and click Submit. Your modem will be rebooted automatically. Once it starts up, Port 25 will be active.
Optimum Online for Business customers who do not subscribe to Optimum Online Boost can call Technical Support at 1-866-575-8000 to have Port 25 activated.
Workarounds for Standard Optimum Online Customers
If Port 25 filtering is affecting your ability to send or receive non-Optimum Online e-mail, here are some options you may choose to pursue:
Contact your e-mail service provider to see if they support alternate connection methods such as VPN or SMTPS.
If available, use your e-mail service provider's WebMail.

Project is not created from Project PO

Hi,
I can able to create Project PO successfully. But Project is not created from Project PO. Giving message like
Object Project Definition TN1.LEVBW.09004 could not be created
Project TN1.LEVBW.09004 is currently being processed by WF-BATCH.
As I investigated, the defect is caused due to a Lock of the PO in SAP while executing the workflow.
I suspect this lock is getting caught in the function module 'ZPS_STUDIO_PROJECT_CREATE' in the include 'LZPS02F01', after calling the function module 'BAPI_PO_CHANGE'. (Since the PO is being processed by both transaction & workflow here).
I've tried to change the 'COMMIT WORK' statement adding WAIT. But I'm still unable to resolve the issue.
Please provide me the solution.
Thanks,
suresh

It is due to same workflow is triggering with two business object.

Can't create new projects in RoboHelp HTML 7

When I try to create a new projects in RoboHelp HTML 7, the
Projects Type field is blank on the New tab of hte New Project
dialog box. I just bought this product after using the trial
version for 30 days. I can open the projects I created before but
can't create new projects. Help! I need it now!

OK, this problem is solved -- the problem was RoboSource
Control 3.1. I realized that I had installed RoboSource Control 3.1
during my Trial install (the option to install it is checked by
default). By re-running the Trial download (thank God I saved it) I
was able to uninstall RoboSource Control 3.1. (I could not
uninstall it using the Tech Comm Suite installer or the Add/Remove
function in the Windows Control Panel)
Then I ran the Tech Comm Suite install and reinstalled
RoboHelp 7 (without installing RoboSource Control 3.1).
Now RoboHelp 7 HTML works again. Note that only the HTML
version was screwed up -- the Word version ran OK, I just don't
need it.
Finally, I just want to say, Adobe Tech Support *SUCKS*.
After spending a half hour on my initial call on Sept. 26th, "Ken"
directed me to the Adobe Support web page and told me to enter my
problem myself -- thanks for nothing, Ken. He promised a 24 hour
turn around, which did not happen.
When I called back on Sept. 29th, I wasted another hour with
Natasha and Sam, who had me run CSClean, which wiped out my
registry entries for Acrobat and Photoshop, forcing a reinstall of
those products. Of course, that did not help me at all.
Adobe, please stop outsourcing your Tech Support to India --
those guys know nothing!
The replies to this issue on the "Customer Support Portal"
have been slow, indifferent and unhelpful. Shame on them!
I'm posting this fix to this problem on this Forum, so the
next poor slob may be able to fix their problem themselves as I
did, 'cause Tech Support sure won't help!

In garageband I can't create new projects

In garageband I can't create new projects it says file couldn't be opened. Checking on web searches some indicate to check under Library... I do not have a Library directory on my system. Garageband came with the Mac. Any clues how to get it to work?

kenevans3 wrote:
I do not have a Library directory on my system.
in Finder hold down the OptionKey and click the Go menu, select the Library menuItem to open it

I can not create EPS

Hello,
I have a problem in P6 EPPM V8.1. I can not create EPS nodes, when I try it an error message pop up telling me that Activity codes longer than 20 characters are not allowed but I revise all the projects already loaded and there aren´t codes longer than 20 characters. Can anybody tell me why is this happening? Is this a software bug?
Regards
Andres

Hi,
First of all check with your administrator whether you have the right privileges to create an EPS in EPPM. In release 8.1 the web version is called EPPM and the client is called Optional Client. All administrative works are done in EPPM. So for creating an EPS also you need to log in to EPPM.
If you have the privileges for creating an EPS then log in to P6 EPPM and go to EPS page under Projects tab. There you will find the button of creating Sibling EPS. You can also create a sibling or child EPS from Action menu > Add > Add Sibling EPS/Add Child EPS
Thanks,
Dip

Can not create the connection in the enrironment!!

hello,every one:
please see the following code:
          Environment *env = Environment::createEnvironment(Environment::OBJECT);
          Connection *conn = env->createConnection(userName,password,connectString);
try
//use the conn
          catch (SQLException &ex)
               env->terminateConnection(conn);
               Environment::terminateEnvironment(env);
               throw;//re-throw
          env->terminateConnection(conn);
          Environment::terminateEnvironment(env);
          Environment *ev = Environment::createEnvironment(Environment::OBJECT);
//the program stopped here,display i can not create the new connection
          Connection *cn = ev->createConnection(userName,password,connectString);
          ev->terminateConnection(cn);
          Environment::terminateEnvironment(ev);
I have terminated the connection and the environment,then why I can not create the
connection in the new environment?
I have tried several times,if you connect the same database as the former,then it
does not work,but if you connect a new database ,it can create the new connection!
plus:I don't want to use conection pool .
Can I have some method to solve the problem?
Please help me!
Thanks a lot in advance!
tony from China

Hi Tony,
This similar sample works perfectly fine for me. Can you
retry with this?
#include <iostream>
#include <occi.h>
using namespace std;
using namespace oracle::occi;
int main()
        Environment *env = Environment::createEnvironment(Environment::OBJECT);
        Connection *conn = env->createConnection("scott","tiger","inst1");
        try
        //use the conn
        catch (SQLException &ex)
                env->terminateConnection(conn);
                Environment::terminateEnvironment(env);
                cout<<ex.getMessage();
        env->terminateConnection(conn);
        Environment::terminateEnvironment(env);
        Connection *cn;
        Environment *ev;
        try{
        ev = Environment::createEnvironment(Environment::OBJECT);
        cn = ev->createConnection("scott","tiger","inst1");
        catch (SQLException &ex)
                ev->terminateConnection(cn);
                Environment::terminateEnvironment(ev);
                cout<<ex.getMessage();
        ev->terminateConnection(cn);
        Environment::terminateEnvironment(ev);
}Rgds
Amogh

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

Can not create recovery discs on satellite C875D-S7330

Can not create recovery discs on satellite C875D-S7330. Drive runs and appears to be doing it thing, then aborts saying it has error to check disc for scratch or dust on media. Error code: OEO1B5-26-2AO3OC 00 . Tried 3 new discs all same results. Tried a 4th disc trying to continue on with disc 2 of recovery discs, got another error on this one. Error code: 020150-20-00000000.
Anyone have a fix for this? Had this machine less than 24hrs.
Thanks
Don B.

Personally, I would get a 16gig USB thumb drive and put your recovery on it. It eliminates having to swap disks during recovery and it's easy to store. I've used mine several times and it's worked perfectly every time.
L875D-S7232 (Win 8.1)

Admin Tool can not create any new database or model [nqserror 46131]

Hi everyone!
I can not create anything new in each layer on the admin tool. It marks unknown error.
When I try to import metadata it send the message: [nqserror 46131] unresolved hostname, everything in online mode. I can modify everything offline, then replace the rpd and I can create reports in Answers. But I need to do all of these online mode.
Everything else works well (Answers, Dashboards, Publisher). The server name is correctly put in the instanceconfig.xml.
OBIEE Version: 11.1.1.6.0 (upgrade recently from 11.1.1.5). The scheduler does not start since migration.
Server OS: Red hat enterprise edition
Regards,
Edgar Tercero
Edited by: 958457 on 11-sep-2012 12:04
Edited by: 958457 on 11-sep-2012 14:13

Thanks but it not solve my problem.
I detect no problem in my enviroment variables in the bi-init.sh
This is what my admin tool log says:
[OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 690] [nQSError: 43113] Message returned from OBIS. [[
[nQSError: 46131] Unresolved host name: vrnmobiee. Could not get details about the specified host]]

Can not create in Project Express CI

Similar Messages

Maybe you are looking for