Can not print the contents of an E-Mail message
I'm running both Firefox and Nightly and it happens with both but not with IE. My E-Mail is SMTE. If I go to print or print preview of my E-Mail message, there is nothing there but I can cut and paste the text out of the message into Word and then I can print it. I suspect. Double checking, I can not print anything from the browser
To print part of the list (assuming they are in the
first slots, and all nulls are at the end):
System.out.println(Arrays.asList(arrayOfStrings)
.subList(0, numberOfNames));
many thanks, this has helped alot!
the only problem i am now facing is that i have done it via RMI and every time i send a message the person who sends the message becomes added to the list again, for example i end up with a long list like:
online = sun, sun, sun, sun, sun
when there is only one sun! this list increases every time a message is sent!
i only want the name there once!
and also on the first sending there is no value in the array, starts off [ ] when sun is online.
thanks
Similar Messages
-
I have a PDF that it was send to me and I can not print the content
I have a PDF file send to me to fill the blank , now that I did finish on my print it does not show the content I did typed?
Is this a form? If so, are you filling it out using Mac Preview? If so, fill out the form using Adobe Reader instead.
-
I have a MG6320 Printer. It will not print the contents of an email, only the outline
I have a Canon MG 6320 printer. When I call up an email in GMail, it will not print the contents of the email, only the words and figures displaye don rails down the side and at the top. Can anyone tell me what I can do to change this?
James O'SheaHi JOShea432,
In order to assist with this issue we will need more information. Is the problem only occuring in Gmail? If so, are you using the print button from within Gmail or are you using the print option under the File menu in your web browser?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Help required please. "Itunes can not read the contents of my iphone"
Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description: PC
IP Address: (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers: 10.143.147.147
10.143.147.148
Adapter Name: {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description: Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name: {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description: Broadcom 43225 802.11b/g/n
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: PC
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number: 85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restored bcause there are files that are used by other application. My iPOD appears in My Computer in drive H as a mass storage generick volume
Try disabilng the Enable Disk Use option from under the iPod's Summary tab, applying the changes, and seeing if that helps.
Otherwise, temporarily disabling any antivirus, security, firewall, or file indexing software that may be running on your system and then try restoring your iPod again.
B-rock -
itunes can not read the contents of the iphones "iphone 5s" go to summary tab in iphone preferences... . "what is this means?" "what i do????"
Hello there, Choochg.
The following Knowledge Base articles offer up some great steps for how to restore your iPhone:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
and
iCloud: Restore your iOS device from iCloud
https://support.apple.com/kb/ph12521
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Can't install security update 2011-04 it says it can not validate the contents. Any advice on how to be able to download it?
Hi G,
If you're not using Software Update (in the Apple menu), use that.
If you are using SU and getting that message, try going to http://support.apple.com/downloads/ and downloading it, then install it. -
TS3276 I can login perfectly to my hotmail account but can not see the contents. What is wrong?
I have more than one mail account. All of them are working except hotmail. Everything seems to be logged correctly. Even checked with "connection doctor". I can not see the contents of the hotmail account. What could be wrong?
When you read the ebooks on your iPad (with you logged in using your Acrobat account), did you explicitly save those files to Acrobat.com? Are you able to access those same files in browser?
-
Question:
I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. PhuongHi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
How can I do the upload of old e-mail messages to ICloud?
How can I do the upload of old e-mail messages to ICloud?
You do not have to purchase any storage for iTunes match, your iTunes match subscription allows you to store up to 25,000 tunes, you cannot selectively choose tunes to store or not to store.
-
Can you print the contents of a blob in Bi Publisher
For example, Bi Publisher generate a pdf file in apex that will print the contents of a blob.
Let's say you have a record with test.xls in a blob, can I take the test.xls out of the record and have bi publisher print it.
Thanks,
DougBI Publisher can add some blobs to a report, such as a .jpg / .gif / .png, but excel just doesn't make sense, nor do I think it would work.
Tyler Muth
http://tylermuth.wordpress.com
"Applied Oracle Security: Developing Secure Database and Middleware Environments": http://sn.im/aos.book -
Photoshop can not print the maximum amount of data that can be spooled to a PostScript printer is 2G
Hi all,
This is the first time I've worked with the .psb (large format) size and I have gone to print a PDF of the file and I get the message:
"photoshop can not print this document because the document is too large. The maximum amount of data that can been spooled to a PostScript printer is 2GB".
The file itself is a 2700x1570mm 300dpi flatten .psb image that is 500mb in size.
Not sure how I can get around this, where abouts do I see the image size information that is being spooled?
Any help would be greatThere's no easy way to see the size of the image that's being spooled, but 2G limit is uncompressed, 4 bytes per pixel (either RGBX where X is a padding byte, or CMYK, depending on the image / printer), times about 1.6 because the image data is sent in ASCII85 format rather than binary.
With your image at over 100 inches at 300 dpi, you're also perilously close to the 32k limit on the pixels in any one dimension (31,900 by my calculations) that PostScript can handle.
The limits are 32767 pixels in either dimension, and 2GB of data total. The data that's sent at 4 bytes per pixel, and converted to ASCII85 so that it'll make it across any connection. ASCII85 gives about a 1.6 expansion factor, if I remember correctly.
Do you really need a 10 foot image printed at 300 dpi? If not, changing down to 200 dpi will probably let this image print. -
Can you print the contents of an array?
I am building a chat program and what to be able to show who is online, i simply want to display the contents of the name array to the text area as this is how i send and recieve the usernames.
I thought the names array may contain all the names and therefore can be printed to the textarea.
is this possible and what command do i use if so?
thank youTo print part of the list (assuming they are in the
first slots, and all nulls are at the end):
System.out.println(Arrays.asList(arrayOfStrings)
.subList(0, numberOfNames));
many thanks, this has helped alot!
the only problem i am now facing is that i have done it via RMI and every time i send a message the person who sends the message becomes added to the list again, for example i end up with a long list like:
online = sun, sun, sun, sun, sun
when there is only one sun! this list increases every time a message is sent!
i only want the name there once!
and also on the first sending there is no value in the array, starts off [ ] when sun is online.
thanks -
I tunes keeps telling me that it can not read my phone and it wants me to reset to factory setting there is nothing wrong with my phone and my computer reads the phone. What should I do I already did the restart of the apple mpbile device service.
Do an iCloud-backup, reset the iPhone and restore is from the iCloud-backup.
Let me know if it works -
Not Printing the Content of Object:SOme Garbage Value on Screen
i have made one program of Vehicle class which adds and prints the Details of Vehicles in the ArrayList but it always showa the Garbage Value in return.
import java.util.*;
import java.awt.*;
import java.lang.*;
import java.io.*;
public class Vehicle
private int reg_no;
private String model_name;
private int model_no;
private int yr_manufacture;
private String veh_type;
private int price;
private int weight;
private String veh_status;
public ArrayList vehicles;
static BufferedReader keyboard = new BufferedReader (new InputStreamReader (System.in));
public Vehicle()
//super();
vehicles=new ArrayList(10);
public Vehicle(int regno,String mo_name,int mo_no,int year_manu,String type_veh,int cost,int weight,String status)
this.reg_no=regno;
this.model_name=mo_name;
this.model_no=mo_no;
this.yr_manufacture=year_manu;
this.veh_type=type_veh;
this.price=cost;
this.weight=weight;
this.veh_status=status;
public void addVehicle() throws IOException
int regno;
String mo_name;
int mo_no;
int year_manu;
String type_veh;
int weight=0;
int no_person;
int cargo;
int cost;
String status;
String confirm;
int countvehicle=0;
//start of do-while loop
do {
System.out.print("Input the Vehicle Registration Number(Integer):");
regno=Integer.parseInt(keyboard.readLine().trim());
System.out.print("Input the Vehicle Make(String)eg. Mercedes,Ferrari,BMW etc: ");
mo_name=keyboard.readLine();
System.out.print("Input the Vehicle Model(Integer): ");
mo_no=Integer.parseInt(keyboard.readLine().trim());
System.out.print("Input the Vehicle Manufactured Year(Integer): ");
year_manu=Integer.parseInt(keyboard.readLine().trim());
System.out.print("Input the Vehicle Type:(CAR/BUS/TRUCK)");
type_veh=keyboard.readLine();
System.out.print("Where do u want this Vehicle to be Loaded:(Type F or I)?");
status =keyboard.readLine();
if(countvehicle>6 && status.equals("I"))
System.out.println("Sorry.........Ferry is Overloaded your Vehicle will be Loacally on the Island");
status="Island";
System.out.println("Vehicle in Island");
else
System.out.println("Vehicle loaded on to Ferry");
status="Ferry";
//decide the weight Factor for the Vehicle
if(type_veh.equals("CAR"))
weight=1500;
else if(type_veh.equals("BUS"))
System.out.print("Input the boarding No of Person in Bus: ");
no_person=Integer.parseInt(keyboard.readLine().trim());
weight=(10000+(no_person*75));// Assuming the weight of one Person is 75kg.
else if(type_veh.equals("TRUCK"))
System.out.print("Input the Truck Cargo Load: ");
cargo=Integer.parseInt(keyboard.readLine().trim());
weight=(4500+cargo);
System.out.print("Input the Vehicle Price: ");
cost=Integer.parseInt(keyboard.readLine().trim());
Vehicle regVehicle= new Vehicle (regno,mo_name,mo_no,year_manu,type_veh,cost,weight,status);
vehicles.add(regVehicle);//Add to the Vector
regVehicle.printall();
//Saving the Added Object in File
/*try
FileOutputStream f_out = new FileOutputStream("Added.txt");
ObjectOutputStream obj_out = new ObjectOutputStream(f_out);
obj_out.writeObject(vehicles.add(regVehicle));
catch (FileNotFoundException e)
System.err.println("Error:"+ e.getMessage());
catch (IOException e)
System.err.println("Error:"+ e.getMessage());
countvehicle++;
System.out.print ("Add a new vehicle (y or n)? ");
System.out.flush();
confirm= keyboard.readLine();
} while (confirm.equals("y")); //end of do while loop
public Vehicle getVehicle(int index) throws IOException
return (Vehicle)vehicles.get(index);
public int getRegNo() throws IOException
return reg_no;
public Vehicle lookUpVehicle (int accnos)throws IOException
//start of for loop
for(int i=0;i<vehicles.size();i++)
//checks if the information entered are correct using an if statement
if((((Vehicle)vehicles.get(i)).getRegNo()) == accnos)
return ((Vehicle)vehicles.get(i));
return null;
public void printDetails()throws IOException
System.out.println("--------Vehicle Details------------ ");
for(int i=0;i<vehicles.size();i++)
System.out.println(" " + getVehicle(i));
//System.out.println("\n\n");
//return ((Vehicle)elements());*/
/*Iterator it = vehicles.iterator();
while (it.hasNext())
System.out.println(it.next());
public void printall()
System.out.println(reg_no);
System.out.println(model_name);
System.out.println(model_no);
System.out.println(weight);
}sohamdave wrote:
what toString will contain in them.i didn't get you there.it is the whole data type-casted to String or only object type-casted to StringSimply return a String representation of the Vehicle object; frequently the String contains the member variable values, e.g.
public String toString() {
return model_name+" "+veh_type;
}The List toString() method itself invokes your method when the List itself needs to be printed.
kind regards,
Jos
Maybe you are looking for
-
How get all record from master and matching record from detail
hi master sir i have master detail table i have many record in master table but some record in detail table how i get all record from master and matching record from detail such as select m.accid,m.title,d.dr,d.cr from master m, detail d where m.acci
-
What's wrong with my mac? it's restarting automatically.
Recently i updated to Mountain Lion 10.8.4. As per coconut battery my battery loadcycles - 502 now im having this problems.It's restarting automatically. Error details: Interval Since Last Panic Report: 185614 sec Panics Since Last Report:
-
Has anyone experienced an issue where images such as a bmp appear shrunk when displayed in a report, even though the bmp looks fine when opened with another application? The file name of the bmp is also displayed in the report. Edited by: McKRussell
-
create or replace package body test_data is V_STARTDATE DATE; PROCEDURE CATEGORY_EXPORT aS cursor C1 is select expdate from local_Category_Data loc; end category_us_export; end test_data; gives error "encountered the symbol end when expecting the fol
-
I installed Snow leopard and now can't access Word Anyone know what I can do? Thanks Beth