Can not use feedback application
I get the following error when I try to run the feedback application:
To use Windows Feedback, you must be registered with the Windows Insider Preview Programme , and connected to the Internet the first time you run the feedback app.
(The spelling error is Microsoft's error not mine)
Yet I am registered for both the enterprise and general public technical preview insider programs.
I would love to give feedback on some personalization bugs I have encountered but can not send them.
Hi,
After we switch to a Microsoft account, we need to join the Microsoft Account into the insider program through the following link:
https://insider.windows.com/ (Or the next time the error appears, click on the
Windows Insider Preview Program, this page will open directly.)
After we accepted the agreements and receive the successful joined message, close the feedback tool and open it again, then we will be able to use the feedback tool.
If we have already joined the Windows Insider Preview Program, the feedback tool would become available once we switched to the Microsoft account.
If issue still insists, try with the Apps troubleshooter, Which would also work in Windows 10 Technical Preview.
Further, we could also submit feedback and suggestions with the following forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=WinPreview2014Feedback&filter=alltypes&sort=lastpostdesc
Here is the forum Q&A: https://social.technet.microsoft.com/Forums/en-US/41ff8e9f-d0de-4214-bb12-ef3c678758be/qa?forum=WinPreview2014Feedback
Best regards
Michael Shao
TechNet Community Support
Similar Messages
-
I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name. What i must to do ?
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page -
HFM can not using copy application
Dear All,
I install HFM 9.3.1.4 on Oracle 9.2.0.6 DB. All functions are workable, only CopyAPP cannot work, after choice source & target application and start copy application; the error massage will come out and cannot go on....
Do anyone know how to solve this issue and can give me some feedback...thanksWhat error are you getting?
-
My Mac OS is 10.4.11
I do not know which version of Firefox did I haveHere is the system requirements page: http://www.mozilla.com/en-US/firefox/system-requirements.html.
http://www.mozilla.com/en-US/firefox/all-older has the latest 3.6.x version, and http://www.floodgap.com/software/tenfourfox/ is another option. -
hi,
I like to know besides running 2 or more operating systems,like exchange or SQL ect .
what other benefits it has for example when you install 2-3 applications in t hyper_v environment can you use those applications from each client computer or that is not possible at all. ( I don't mean cloud )
thanks
johan
h.davidthanks,
so , now what is the benefit of hyper-v role on essential 2012r2 . it that means that I can install only one operating system on it only one instance and no more. also I can run some applications on this server just like you say with RDP licence
for each user to acces this virtual server!
and if I want more instances then I have to get datacenter.
johan
h.david -
I can not use my account to buy applications inside because I forgot the answers safety questions
You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(86795) -
Can not use WeChat (IM application) on Q10
Got this Q10 half month ago. Installed WeChat and have been using it since then. No problem found.
Starting from this morning, I can not open this application anymore. It shows up for a second and disappears. Deleted and re-installed the application, no luck. Restarted the phone, no luck. Even tried to reset the phone to factory default, and re-installed the application. The problem still exist. All other functions are working except WeChat.
Anyone got this problem before? Please instruct how to fix it.Friends the application has stopped working I recommend you get in contactor with WeChat support team.
To give prompt response inconvenient.
and so you can continue using your application again as normal.
Regards...
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I -
why I can not give the application?
I have money in the account at the expense of Gift cards ($19.80), and I am forced to fill payment informationWe are not Apple employees here. Everyone here is just a fellow user. You can comment to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/itunesapp.html
but Apple does state in a number of places that you cannot use a gift card to buy other gifts, including the purchase page in the Apple Store.
Regards. -
Can not use TOUCH function on Nokia 6600 slide
Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of orderAs long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf -
Can i use other application on ipad such as microsoft excel or word? how?
can i use other application on ipad such as microsoft excel or word? how?
'Normal' PC and Mac (OS X) software do not work on the iPad (iOS), they are different operating systems. You can only install apps from the iTunes App Store on your computer or the App Store app directly on your iPad.
Numbers (http://itunes.apple.com/us/app/numbers/id361304891?mt=8) and Pages (http://itunes.apple.com/us/app/pages/id361309726?mt=8) are two options, as are third-party apps such as Documents To Go :
'normal' version : http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version : http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8 -
I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks
Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again. -
DBCA can not use ASM for database storage due to following reason: Could no
Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advanceThanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks -
Can not use previous password in ISE 1.1.2 patch-5
this is my password-policy:
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
password-lock-retry-count 5
I also entered the followings:
conf t
password-policy
no password-locked-enabled
no no-previous-password
my initial "admin" account has the password of "Checkpoint1234". It locked me out after 5 attempts from the webUI. Fine, I CLI into the box and reset
the password, when I tried to reset the password for "admin" to "Checkpoint1234", it tells me that I can NOT use a previous password.
How do I disable this option altogether? In other words, I want to use previous password.
By the way, in the webUI password-policy, you have to set the "Password History" between 1 and 10. WTF!!!
Thanks in advance.Admin account for the web UI seems to be locked out. So it needs to be reset from CLI.
An incorrect password for your administrator user ID entered enough times to disable the administrator password. The minimum and default number is five. The Cisco ISE user interface “locks you out” of the system and suspends the credentials for that administrator ID until you have an opportunity to reset the password that is associated with that administrator ID. It does not affect the CLI password for the specified administrator ID
Step 1 Access the direct-console CLI and enter the following command:
admin# application reset-passwd ise
Step 2 Specify a new password that is different from the previous two passwords that were used for this administrator ID:
Enter new password:
Confirm new password:
Password reset successfully
If you only want to use the previous password, you should change the password policy first. After you have successfully reset the administrator password, the credentials become immediately active in the Cisco ISE and you can log in with the new password without having to reboot your system.
Review the section "Password Negated Due to Administrator Lockout" at the folowing location:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/ise_postins.html -
I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help
There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
Problem:
You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
You get a couple of error messages, which you click through.
You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
Solution:
BEFORE you restart, and with the installer package still open -
1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
Applications : Canon Utilities
Applications : Canoscan Toolbox
and remove the prefix Into_ from each folder
2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
Library : CFMSupport
and if it didn't, move it there yourself
THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know. -
I just purchased a MacBook Pro and I can not use my Clear broadband.
I just purchased a Mac pro book and I can not use my Clear broadband. A message pops up saying the operating system is running in 64 bit mode . Please switch to 32 bit mode. How do I swich the mode and will this cause problems. There must be other MacBook Pro operators that use Clear broadband as their internet connection.
Never heard of them but I Googled and took a look. Seems as if they offer either a USB modem or a 'home' modem - which do you have?
If you're on a newer Mac (and I see that you are) and running Mountain Lion you cannot start up in a 32-bit kernel. I'm not sure if thise is directly related to the question, actually, as some applications will actually let you 'open' in 32-bit mode. If you're using an application that runs the modem software, try selecting it and doing a "Get Info" (Command-I) from the Finder and see if there is an option to "Open in 32-bit mode".
Good luck,
Clinton
Maybe you are looking for
-
On Windows Vista trying to backup a 7.5 gb library to DVD, iTunes writes the first disk, asks for the 2nd, says it is writing song such-and-such and just freezes. Can anyone help?
-
We are using an external WMS system (PKMS), so SAP is configured with de-centralized warehousing. This means that when product is shipped we receive from the external WMS an iDoc for the Post Goods Issue transaction. They come in bunches, since there
-
Printing a template in pdf @ 100%
Help I have some templates i need to print and cut out, The templates are bigger than A4 paper, How can i adjust my printer settings so that it prints them at 100% as they are shown in the pdf file ? When i attempt it,i get half the template out on 1
-
How to add a trigger for a section to suppress in Documaker 11.4
Hi, I am using 11.4. My form has a particular section which in turn has a multi line variable that gets printed based on a DAL. if the DAL returns no value, the variable would be empty and it prints the blank sections. I want the section not to be pr
-
fresh install of flash and Incredimail, but Incredimail won't open. Gives warning "server application, with further info, that cannot be read due to screen closes b4 you can read all of it. Anyone else, same issue?