Can not use FN+F6/F7 to set screen brightness on my Tecra M2

Hello!!
I bought laptop Tecra M2 but when I format it with Windows XP SP2 the keys FN+F7/F6 doesn't Active For Display Screen Quality and I formatted it Appliance
Please I want responses.

I can confirm what Robin wrote but want to add that after clean OS installation you need to install Toshiba designed tools and utilities in the right order. This installations order you can find in Installations Instructions document.
If this document is not available for your notebook model please install all stuff in this order:
- WXP SP2
- Intel Chipset Software Installation Utility
- Toshiba Common modules
- Display driver
- SoundMAX Integrated Digital Audio
- Alps Pointing Device Driver
- Toshiba Dual Pointing Device Utility
- Modem driver
- LAN driver
- WLAN driver
- Wireless Hotkey
- Infrared Driver
- Windows SD Host Controller Driver
- SD Memory Boot Utility
- SD Memory Card Format
- Bluetooth Stack
- Toshiba Hotkey for Display Devices
- Toshiba Display Device Change Utility
- Zooming Utility
- Toshiba Power Saver
- Toshiba Mobile Ext.
- Toshiba Utilities
- Toshiba Console
- Toshiba Controls
And so on.
I use Tecra M1 for years now and use the same installations order.

Similar Messages

Can not use 'AT LINE-SELECTION' with SET PF-STATUS

Hi experts,
my code is like below:
PARAMATERS: .....
SET PF-STATUS 'st_nam'.
Perform Load_data . ' For list display
START-OF-SELECTION.
AT LINE-SELECTION.
Perform list_detail.
AT USER-COMMAND.
CALL SCREEN '1001'.
END-OF-SELECTION.
When I execute the report , the basic was displayed , but when then i double click on the list to call the next screen '1001'. It did not work , but if i omit the SET PF-STATUS m AT LINE-SELECTION worked week , so in this case what has happened i how can i solve this problem,
Thaks,
PS: Reward immediately

Hi,
Thank you very much for your helpful answers, I have copied the report downto my system and test it , When i used SET PF-STATUS , i can not use AT LINE-SELECTION to capture events ...May be we can not use these 2 statements in parallel,...:D
Thanks,

HT4061 i can not use my i pad as the screen is locked and it shows ipad is disabled

Dear users i have a problem that i can not open my i pad the screen is locked as i enterd my pass code wrongly many time so
now it is locked and writting ipad is disabled
how i can open it again
thanks

You will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

Hey I bought an iPhone off gumtree and everything was well. But then I tried to set it up and it asked for the apple if of the previous owner and so I asked him for it his Apple ID but refused to tell me so I can not use the phone. how do I fix this?

Hey I bought an iPhone off gumtree and everything was well. But then I tried to set it up and it asked for the apple if of the previous owner and so I asked him for it his Apple ID but refused to tell me so I can not use the phone. how do I fix this?

Contact them back and have them follow these instructions Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support

No video output option at movie project setting can not use my blackmagic video card

no video output option at movie project setting can not use my blackmagic video card

There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Can I use my Time Capsule to set up multiple networks, or just one?

Can I use my Time Capsule to set up multiple networks, or just one? We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

Two big IFs here.
Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule. it's on the bottom of the device.....starts with an "A" followed by four numbers.
Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature.
Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers. If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Can not use previous password in ISE 1.1.2 patch-5

this is my password-policy:
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
password-lock-retry-count 5
I also entered the followings:
conf t
password-policy
no password-locked-enabled
no no-previous-password
my initial "admin" account has the password of "Checkpoint1234". It locked me out after 5 attempts from the webUI. Fine, I CLI into the box and reset
the password, when I tried to reset the password for "admin" to "Checkpoint1234", it tells me that I can NOT use a previous password.
How do I disable this option altogether? In other words, I want to use previous password.
By the way, in the webUI password-policy, you have to set the "Password History" between 1 and 10. WTF!!!
Thanks in advance.

Admin account for the web UI seems to be locked out. So it needs to be reset from CLI.
An incorrect password for your administrator user ID entered enough times to disable the administrator password. The minimum and default number is five. The Cisco ISE user interface “locks you out” of the system and suspends the credentials for that administrator ID until you have an opportunity to reset the password that is associated with that administrator ID. It does not affect the CLI password for the specified administrator ID
Step 1 Access the direct-console CLI and enter the following command:
admin# application reset-passwd ise
Step 2 Specify a new password that is different from the previous two passwords that were used for this administrator ID:
Enter new password:
Confirm new password:
Password reset successfully
If you only want to use the previous password, you should change the password policy first. After you have successfully reset the administrator password, the credentials become immediately active in the Cisco ISE and you can log in with the new password without having to reboot your system.
Review the section "Password Negated Due to Administrator Lockout" at the folowing location:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/ise_postins.html

HT4157 Can I use iTunes gift cards to set up cellular data

Can I use iTunes gift cards to set up cellular data

No cellular data depends on The carrier, not Apple. Gift cards are only for iTunes and AppStore purchases and in app purchases.

I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.

I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.

No you won't necessarily lose your photos when upgrading but it's very very unwise not to back up first. Backing up is like using a seat belt in a car. You can drive without one for years and have no issues, but if you do have a problem the outcome will be a lot worse. So, too, with back ups. And upgrading is one of those times when the risks of a problem are higher.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

HT4623 my iPhone 5 is frozen while I was updating with iTunes. Can not use phone and is stuck on the iTunes and USB screen. How do you fix it?

I can not use the phone at all. It is frozen on the iTunes and USB screen. iTunes is not recognizing the phone as connected either. What do I need to do to fix it.

Open iTunes on computer. Connect iPhone to computer with Lightning Cable. Hold both home and power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If there are any problems with this, you have 1 year Warranty with Apple. Make Genius reservation or set up service and take or send to Apple for resolution.

Can not use FN+F6/F7 to set screen brightness on my Tecra M2

Similar Messages

Maybe you are looking for